/* * linux/drivers/acorn/net/etherh.c * * Copyright (C) 2000-2002 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * NS8390 I-cubed EtherH and ANT EtherM specific driver * Thanks to I-Cubed for information on their cards. * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan) * EtherM integration re-engineered by Russell King. * * Changelog: * 08-12-1996 RMK 1.00 Created * RMK 1.03 Added support for EtherLan500 cards * 23-11-1997 RMK 1.04 Added media autodetection * 16-04-1998 RMK 1.05 Improved media autodetection * 10-02-2000 RMK 1.06 Updated for 2.3.43 * 13-05-2000 RMK 1.07 Updated for 2.3.99-pre8 * 12-10-1999 CK/TEW EtherM driver first release * 21-12-2000 TTC EtherH/EtherM integration * 25-12-2000 RMK 1.08 Clean integration of EtherM into this driver. * 03-01-2002 RMK 1.09 Always enable IRQs if we're in the nic slot. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define EI_SHIFT(x) (ei_local->reg_offset[x]) #define ei_inb(_p) readb(_p) #define ei_outb(_v,_p) writeb(_v,_p) #define ei_inb_p(_p) readb(_p) #define ei_outb_p(_v,_p) writeb(_v,_p) #define NET_DEBUG 0 #define DEBUG_INIT 2 #define DRV_NAME "etherh" #define DRV_VERSION "1.11" static char version[] __initdata = "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n"; #include "../lib8390.c" static unsigned int net_debug = NET_DEBUG; struct etherh_priv { void __iomem *ioc_fast; void __iomem *memc; void __iomem *dma_base; unsigned int id; void __iomem *ctrl_port; unsigned char ctrl; u32 supported; }; struct etherh_data { unsigned long ns8390_offset; unsigned long dataport_offset; unsigned long ctrlport_offset; int ctrl_ioc; const char name[16]; u32 supported; unsigned char tx_start_page; unsigned char stop_page; }; MODULE_AUTHOR("Russell King"); MODULE_DESCRIPTION("EtherH/EtherM driver"); MODULE_LICENSE("GPL"); #define ETHERH500_DATAPORT 0x800 /* MEMC */ #define ETHERH500_NS8390 0x000 /* MEMC */ #define ETHERH500_CTRLPORT 0x800 /* IOC */ #define ETHERH600_DATAPORT 0x040 /* MEMC */ #define ETHERH600_NS8390 0x800 /* MEMC */ #define ETHERH600_CTRLPORT 0x200 /* MEMC */ #define ETHERH_CP_IE 1 #define ETHERH_CP_IF 2 #define ETHERH_CP_HEARTBEAT 2 #define ETHERH_TX_START_PAGE 1 #define ETHERH_STOP_PAGE 127 /* * These came from CK/TEW */ #define ETHERM_DATAPORT 0x200 /* MEMC */ #define ETHERM_NS8390 0x800 /* MEMC */ #define ETHERM_CTRLPORT 0x23c /* MEMC */ #define ETHERM_TX_START_PAGE 64 #define ETHERM_STOP_PAGE 127 /* ------------------------------------------------------------------------ */ #define etherh_priv(dev) \ ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device))) static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask) { unsigned char ctrl = eh->ctrl | mask; eh->ctrl = ctrl; writeb(ctrl, eh->ctrl_port); } static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask) { unsigned char ctrl = eh->ctrl & ~mask; eh->ctrl = ctrl; writeb(ctrl, eh->ctrl_port); } static inline unsigned int etherh_get_stat(struct etherh_priv *eh) { return readb(eh->ctrl_port); } static void etherh_irq_enable(ecard_t *ec, int irqnr) { struct etherh_priv *eh = ec->irq_data; etherh_set_ctrl(eh, ETHERH_CP_IE); } static void etherh_irq_disable(ecard_t *ec, int irqnr) { struct etherh_priv *eh = ec->irq_data; etherh_clr_ctrl(eh, ETHERH_CP_IE); } static expansioncard_ops_t etherh_ops = { .irqenable = etherh_irq_enable, .irqdisable = etherh_irq_disable, }; static void etherh_setif(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); unsigned long flags; void __iomem *addr; local_irq_save(flags); /* set the interface type */ switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: addr = (void *)dev->base_addr + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: writeb((readb(addr) & 0xf8) | 1, addr); break; case IF_PORT_10BASET: writeb((readb(addr) & 0xf8), addr); break; } break; case PROD_I3_ETHERLAN500: switch (dev->if_port) { case IF_PORT_10BASE2: etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF); break; case IF_PORT_10BASET: etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF); break; } break; default: break; } local_irq_restore(flags); } static int etherh_getifstat(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); void __iomem *addr; int stat = 0; switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: addr = (void *)dev->base_addr + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: stat = 1; break; case IF_PORT_10BASET: stat = readb(addr) & 4; break; } break; case PROD_I3_ETHERLAN500: switch (dev->if_port) { case IF_PORT_10BASE2: stat = 1; break; case IF_PORT_10BASET: stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT; break; } break; default: stat = 0; break; } return stat != 0; } /* * Configure the interface. Note that we ignore the other * parts of ifmap, since its mostly meaningless for this driver. */ static int etherh_set_config(struct net_device *dev, struct ifmap *map) { switch (map->port) { case IF_PORT_10BASE2: case IF_PORT_10BASET: /* * If the user explicitly sets the interface * media type, turn off automedia detection. */ dev->flags &= ~IFF_AUTOMEDIA; dev->if_port = map->port; break; default: return -EINVAL; } etherh_setif(dev); return 0; } /* * Reset the 8390 (hard reset). Note that we can't actually do this. */ static void etherh_reset(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); void __iomem *addr = (void *)dev->base_addr; writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr); /* * See if we need to change the interface type. * Note that we use 'interface_num' as a flag * to indicate that we need to change the media. */ if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) { ei_local->interface_num = 0; if (dev->if_port == IF_PORT_10BASET) dev->if_port = IF_PORT_10BASE2; else dev->if_port = IF_PORT_10BASET; etherh_setif(dev); } } /* * Write a block of data out to the 8390 */ static void etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page) { struct ei_device *ei_local = netdev_priv(dev); unsigned long dma_start; void __iomem *dma_base, *addr; if (ei_local->dmaing) { printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " " DMAstat %d irqlock %d\n", dev->name, ei_local->dmaing, ei_local->irqlock); return; } /* * Make sure we have a round number of bytes if we're in word mode. */ if (count & 1 && ei_local->word16) count++; ei_local->dmaing = 1; addr = (void *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; count = (count + 1) & ~1; writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); writeb (0x42, addr + EN0_RCNTLO); writeb (0x00, addr + EN0_RCNTHI); writeb (0x42, addr + EN0_RSARLO); writeb (0x00, addr + EN0_RSARHI); writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); udelay (1); writeb (ENISR_RDC, addr + EN0_ISR); writeb (count, addr + EN0_RCNTLO); writeb (count >> 8, addr + EN0_RCNTHI); writeb (0, addr + EN0_RSARLO); writeb (start_page, addr + EN0_RSARHI); writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD); if (ei_local->word16) writesw (dma_base, buf, count >> 1); else writesb (dma_base, buf, count); dma_start = jiffies; while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ printk(KERN_ERR "%s: timeout waiting for TX RDC\n", dev->name); etherh_reset (dev); __NS8390_init (dev, 1); break; } writeb (ENISR_RDC, addr + EN0_ISR); ei_local->dmaing = 0; } /* * Read a block of data from the 8390 */ static void etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { struct ei_device *ei_local = netdev_priv(dev); unsigned char *buf; void __iomem *dma_base, *addr; if (ei_local->dmaing) { printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " " DMAstat %d irqlock %d\n", dev->name, ei_local->dmaing, ei_local->irqlock); return; } ei_local->dmaing = 1; addr = (void *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; buf = skb->data; writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); writeb (count, addr + EN0_RCNTLO); writeb (count >> 8, addr + EN0_RCNTHI); writeb (ring_offset, addr + EN0_RSARLO); writeb (ring_offset >> 8, addr + EN0_RSARHI); writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); if (ei_local->word16) { readsw (dma_base, buf, count >> 1); if (count & 1) buf[count - 1] = readb (dma_base); } else readsb (dma_base, buf, count); writeb (ENISR_RDC, addr + EN0_ISR); ei_local->dmaing = 0; } /* * Read a header from the 8390 */ static void etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) { struct ei_device *ei_local = netdev_priv(dev); void __iomem *dma_base, *addr; if (ei_local->dmaing) { printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: " " DMAstat %d irqlock %d\n", dev->name, ei_local->dmaing, ei_local->irqlock); return; } ei_local->dmaing = 1; addr = (void *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); writeb (sizeof (*hdr), addr + EN0_RCNTLO); writeb (0, addr + EN0_RCNTHI); writeb (0, addr + EN0_RSARLO); writeb (ring_page, addr + EN0_RSARHI); writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); if (ei_local->word16) readsw (dma_base, hdr, sizeof (*hdr) >> 1); else readsb (dma_base, hdr, sizeof (*hdr)); writeb (ENISR_RDC, addr + EN0_ISR); ei_local->dmaing = 0; } /* * Open/initialize the board. This is called (in the current kernel) * sometime after booting when the 'ifconfig' program is run. * * This routine should set everything up anew at each open, even * registers that "should" only need to be set once at boot, so that * there is non-reboot way to recover if something goes wrong. */ static int etherh_open(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); if (!is_valid_ether_addr(dev->dev_addr)) { printk(KERN_WARNING "%s: invalid ethernet MAC address\n", dev->name); return -EINVAL; } if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev)) return -EAGAIN; /* * Make sure that we aren't going to change the * media type on the next reset - we are about to * do automedia manually now. */ ei_local->interface_num = 0; /* * If we are doing automedia detection, do it now. * This is more reliable than the 8390's detection. */ if (dev->flags & IFF_AUTOMEDIA) { dev->if_port = IF_PORT_10BASET; etherh_setif(dev); mdelay(1); if (!etherh_getifstat(dev)) { dev->if_port = IF_PORT_10BASE2; etherh_setif(dev); } } else etherh_setif(dev); etherh_reset(dev); __ei_open(dev); return 0; } /* * The inverse routine to etherh_open(). */ static int etherh_close(struct net_device *dev) { __ei_close (dev); free_irq (dev->irq, dev); return 0; } /* * Initialisation */ static void __init etherh_banner(void) { static int version_printed; if (net_debug && version_printed++ == 0) printk(KERN_INFO "%s", version); } /* * Read the ethernet address string from the on board rom. * This is an ascii string... */ static int __init etherh_addr(char *addr, struct expansion_card *ec) { struct in_chunk_dir cd; char *s; if (!ecard_readchunk(&cd, ec, 0xf5, 0)) { printk(KERN_ERR "%s: unable to read podule description string\n", ec->dev.bus_id); goto no_addr; } s = strchr(cd.d.string, '('); if (s) { int i; for (i = 0; i < 6; i++) { addr[i] = simple_strtoul(s + 1, &s, 0x10); if (*s != (i == 5? ')' : ':')) break; } if (i == 6) return 0; } printk(KERN_ERR "%s: unable to parse MAC address: %s\n", ec->dev.bus_id, cd.d.string); no_addr: return -ENODEV; } /* * Create an ethernet address from the system serial number. */ static int __init etherm_addr(char *addr) { unsigned int serial; if (system_serial_low == 0 && system_serial_high == 0) return -ENODEV; serial = system_serial_low | system_serial_high; addr[0] = 0; addr[1] = 0; addr[2] = 0xa4; addr[3] = 0x10 + (serial >> 24); addr[4] = serial >> 16; addr[5] = serial >> 8; return 0; } static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); strlcpy(info->version, DRV_VERSION, sizeof(info->version)); strlcpy(info->bus_info, dev->class_dev.dev->bus_id, sizeof(info->bus_info)); } static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { cmd->supported = etherh_priv(dev)->supported; cmd->speed = SPEED_10; cmd->duplex = DUPLEX_HALF; cmd->port = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC; cmd->autoneg = dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE : AUTONEG_DISABLE; return 0; } static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { switch (cmd->autoneg) { case AUTONEG_ENABLE: dev->flags |= IFF_AUTOMEDIA; break; case AUTONEG_DISABLE: switch (cmd->port) { case PORT_TP: dev->if_port = IF_PORT_10BASET; break; case PORT_BNC: dev->if_port = IF_PORT_10BASE2; break; default: return -EINVAL; } dev->flags &= ~IFF_AUTOMEDIA; break; default: return -EINVAL; } etherh_setif(dev); return 0; } static const struct ethtool_ops etherh_ethtool_ops = { .get_settings = etherh_get_settings, .set_settings = etherh_set_settings, .get_drvinfo = etherh_get_drvinfo, }; static u32 etherh_regoffsets[16]; static u32 etherm_regoffsets[16]; static int __init etherh_probe(struct expansion_card *ec, const struct ecard_id *id) { const struct etherh_data *data = id->data; struct ei_device *ei_local; struct net_device *dev; struct etherh_priv *eh; int i, ret; etherh_banner(); ret = ecard_request_resources(ec); if (ret) goto out; dev = ____alloc_ei_netdev(sizeof(struct etherh_priv)); if (!dev) { ret = -ENOMEM; goto release; } SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &ec->dev); dev->open = etherh_open; dev->stop = etherh_close; dev->set_config = etherh_set_config; dev->irq = ec->irq; dev->ethtool_ops = ðerh_ethtool_ops; if (data->supported & SUPPORTED_Autoneg) dev->flags |= IFF_AUTOMEDIA; if (data->supported & SUPPORTED_TP) { dev->flags |= IFF_PORTSEL; dev->if_port = IF_PORT_10BASET; } else if (data->supported & SUPPORTED_BNC) { dev->flags |= IFF_PORTSEL; dev->if_port = IF_PORT_10BASE2; } else dev->if_port = IF_PORT_UNKNOWN; eh = etherh_priv(dev); eh->supported = data->supported; eh->ctrl = 0; eh->id = ec->cid.product; eh->memc = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), PAGE_SIZE); if (!eh->memc) { ret = -ENOMEM; goto free; } eh->ctrl_port = eh->memc; if (data->ctrl_ioc) { eh->ioc_fast = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), PAGE_SIZE); if (!eh->ioc_fast) { ret = -ENOMEM; goto free; } eh->ctrl_port = eh->ioc_fast; } dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset; eh->dma_base = eh->memc + data->dataport_offset; eh->ctrl_port += data->ctrlport_offset; /* * IRQ and control port handling - only for non-NIC slot cards. */ if (ec->slot_no != 8) { ec->ops = ðerh_ops; ec->irq_data = eh; } else { /* * If we're in the NIC slot, make sure the IRQ is enabled */ etherh_set_ctrl(eh, ETHERH_CP_IE); } ei_local = netdev_priv(dev); spin_lock_init(&ei_local->page_lock); if (ec->cid.product == PROD_ANT_ETHERM) { etherm_addr(dev->dev_addr); ei_local->reg_offset = etherm_regoffsets; } else { etherh_addr(dev->dev_addr, ec); ei_local->reg_offset = etherh_regoffsets; } ei_local->name = dev->name; ei_local->word16 = 1; ei_local->tx_start_page = data->tx_start_page; ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES; ei_local->stop_page = data->stop_page; ei_local->reset_8390 = etherh_reset; ei_local->block_input = etherh_block_input; ei_local->block_output = etherh_block_output; ei_local->get_8390_hdr = etherh_get_header; ei_local->interface_num = 0; etherh_reset(dev); __NS8390_init(dev, 0); ret = register_netdev(dev); if (ret) goto free; printk(KERN_INFO "%s: %s in slot %d, ", dev->name, data->name, ec->slot_no); for (i = 0; i < 6; i++) printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); ecard_set_drvdata(ec, dev); return 0; free: if (eh->ioc_fast) iounmap(eh->ioc_fast); if (eh->memc) iounmap(eh->memc); free_netdev(dev); release: ecard_release_resources(ec); out: return ret; } static void __devexit etherh_remove(struct expansion_card *ec) { struct net_device *dev = ecard_get_drvdata(ec); struct etherh_priv *eh = etherh_priv(dev); ecard_set_drvdata(ec, NULL); unregister_netdev(dev); ec->ops = NULL; if (eh->ioc_fast) iounmap(eh->ioc_fast); iounmap(eh->memc); free_netdev(dev); ecard_release_resources(ec); } static struct etherh_data etherm_data = { .ns8390_offset = ETHERM_NS8390, .dataport_offset = ETHERM_NS8390 + ETHERM_DATAPORT, .ctrlport_offset = ETHERM_NS8390 + ETHERM_CTRLPORT, .name = "ANT EtherM", .supported = SUPPORTED_10baseT_Half, .tx_start_page = ETHERM_TX_START_PAGE, .stop_page = ETHERM_STOP_PAGE, }; static struct etherh_data etherlan500_data = { .ns8390_offset = ETHERH500_NS8390, .dataport_offset = ETHERH500_NS8390 + ETHERH500_DATAPORT, .ctrlport_offset = ETHERH500_CTRLPORT, .ctrl_ioc = 1, .name = "i3 EtherH 500", .supported = SUPPORTED_10baseT_Half, .tx_start_page = ETHERH_TX_START_PAGE, .stop_page = ETHERH_STOP_PAGE, }; static struct etherh_data etherlan600_data = { .ns8390_offset = ETHERH600_NS8390, .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT, .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT, .name = "i3 EtherH 600", .supported = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg, .tx_start_page = ETHERH_TX_START_PAGE, .stop_page = ETHERH_STOP_PAGE, }; static struct etherh_data etherlan600a_data = { .ns8390_offset = ETHERH600_NS8390, .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT, .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT, .name = "i3 EtherH 600A", .supported = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg, .tx_start_page = ETHERH_TX_START_PAGE, .stop_page = ETHERH_STOP_PAGE, }; static const struct ecard_id etherh_ids[] = { { MANU_ANT, PROD_ANT_ETHERM, ðerm_data }, { MANU_I3, PROD_I3_ETHERLAN500, ðerlan500_data }, { MANU_I3, PROD_I3_ETHERLAN600, ðerlan600_data }, { MANU_I3, PROD_I3_ETHERLAN600A, ðerlan600a_data }, { 0xffff, 0xffff } }; static struct ecard_driver etherh_driver = { .probe = etherh_probe, .remove = __devexit_p(etherh_remove), .id_table = etherh_ids, .drv = { .name = DRV_NAME, }, }; static int __init etherh_init(void) { int i; for (i = 0; i < 16; i++) { etherh_regoffsets[i] = i << 2; etherm_regoffsets[i] = i << 5; } return ecard_register_driver(ðerh_driver); } static void __exit etherh_exit(void) { ecard_remove_driver(ðerh_driver); } module_init(etherh_init); module_exit(etherh_exit);