/* * pc300.h Cyclades-PC300(tm) Kernel API Definitions. * * Author: Ivan Passos * * Copyright: (c) 1999-2002 Cyclades Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * $Log: pc300.h,v $ * Revision 3.12 2002/03/07 14:17:09 henrique * License data fixed * * Revision 3.11 2002/01/28 21:09:39 daniela * Included ';' after pc300hw.bus. * * Revision 3.10 2002/01/17 17:58:52 ivan * Support for PC300-TE/M (PMC). * * Revision 3.9 2001/09/28 13:30:53 daniela * Renamed dma_start routine to rx_dma_start. * * Revision 3.8 2001/09/24 13:03:45 daniela * Fixed BOF interrupt treatment. Created dma_start routine. * * Revision 3.7 2001/08/10 17:19:58 daniela * Fixed IOCTLs defines. * * Revision 3.6 2001/07/18 19:24:42 daniela * Included kernel version. * * Revision 3.5 2001/07/05 18:38:08 daniela * DMA transmission bug fix. * * Revision 3.4 2001/06/26 17:10:40 daniela * New configuration parameters (line code, CRC calculation and clock). * * Revision 3.3 2001/06/22 13:13:02 regina * MLPPP implementation * * Revision 3.2 2001/06/18 17:56:09 daniela * Increased DEF_MTU and TX_QUEUE_LEN. * * Revision 3.1 2001/06/15 12:41:10 regina * upping major version number * * Revision 1.1.1.1 2001/06/13 20:25:06 daniela * PC300 initial CVS version (3.4.0-pre1) * * Revision 2.3 2001/03/05 daniela * Created struct pc300conf, to provide the hardware information to pc300util. * Inclusion of 'alloc_ramsize' field on structure 'pc300hw'. * * Revision 2.2 2000/12/22 daniela * Structures and defines to support pc300util: statistics, status, * loopback tests, trace. * * Revision 2.1 2000/09/28 ivan * Inclusion of 'iophys' and 'iosize' fields on structure 'pc300hw', to * allow release of I/O region at module unload. * Changed location of include files. * * Revision 2.0 2000/03/27 ivan * Added support for the PC300/TE cards. * * Revision 1.1 2000/01/31 ivan * Replaced 'pc300[drv|sca].h' former PC300 driver include files. * * Revision 1.0 1999/12/16 ivan * First official release. * Inclusion of 'nchan' field on structure 'pc300hw', to allow variable * number of ports per card. * Inclusion of 'if_ptr' field on structure 'pc300dev'. * * Revision 0.6 1999/11/17 ivan * Changed X.25-specific function names to comply with adopted convention. * * Revision 0.5 1999/11/16 Daniela Squassoni * X.25 support. * * Revision 0.4 1999/11/15 ivan * Inclusion of 'clock' field on structure 'pc300hw'. * * Revision 0.3 1999/11/10 ivan * IOCTL name changing. * Inclusion of driver function prototypes. * * Revision 0.2 1999/11/03 ivan * Inclusion of 'tx_skb' and union 'ifu' on structure 'pc300dev'. * * Revision 0.1 1999/01/15 ivan * Initial version. * */ #ifndef _PC300_H #define _PC300_H #include #include "hd64572.h" #include "pc300-falc-lh.h" #define PC300_PROTO_MLPPP 1 #define PC300_MAXCHAN 2 /* Number of channels per card */ #define PC300_RAMSIZE 0x40000 /* RAM window size (256Kb) */ #define PC300_FALCSIZE 0x400 /* FALC window size (1Kb) */ #define PC300_OSC_CLOCK 24576000 #define PC300_PCI_CLOCK 33000000 #define BD_DEF_LEN 0x0800 /* DMA buffer length (2KB) */ #define DMA_TX_MEMSZ 0x8000 /* Total DMA Tx memory size (32KB/ch) */ #define DMA_RX_MEMSZ 0x10000 /* Total DMA Rx memory size (64KB/ch) */ #define N_DMA_TX_BUF (DMA_TX_MEMSZ / BD_DEF_LEN) /* DMA Tx buffers */ #define N_DMA_RX_BUF (DMA_RX_MEMSZ / BD_DEF_LEN) /* DMA Rx buffers */ /* DMA Buffer Offsets */ #define DMA_TX_BASE ((N_DMA_TX_BUF + N_DMA_RX_BUF) * \ PC300_MAXCHAN * sizeof(pcsca_bd_t)) #define DMA_RX_BASE (DMA_TX_BASE + PC300_MAXCHAN*DMA_TX_MEMSZ) /* DMA Descriptor Offsets */ #define DMA_TX_BD_BASE 0x0000 #define DMA_RX_BD_BASE (DMA_TX_BD_BASE + ((PC300_MAXCHAN*DMA_TX_MEMSZ / \ BD_DEF_LEN) * sizeof(pcsca_bd_t))) /* DMA Descriptor Macros */ #define TX_BD_ADDR(chan, n) (DMA_TX_BD_BASE + \ ((N_DMA_TX_BUF*chan) + n) * sizeof(pcsca_bd_t)) #define RX_BD_ADDR(chan, n) (DMA_RX_BD_BASE + \ ((N_DMA_RX_BUF*chan) + n) * sizeof(pcsca_bd_t)) /* Macro to access the FALC registers (TE only) */ #define F_REG(reg, chan) (0x200*(chan) + ((reg)<<2)) /*************************************** * Memory access functions/macros * * (required to support Alpha systems) * ***************************************/ #define cpc_writeb(port,val) {writeb((u8)(val),(port)); mb();} #define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} #define cpc_writel(port,val) {writel((u32)(val),(port)); mb();} #define cpc_readb(port) readb(port) #define cpc_readw(port) readw(port) #define cpc_readl(port) readl(port) /****** Data Structures *****************************************************/ /* * RUNTIME_9050 - PLX PCI9050-1 local configuration and shared runtime * registers. This structure can be used to access the 9050 registers * (memory mapped). */ struct RUNTIME_9050 { u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ u32 loc_rom_range; /* 10h : Local ROM Range */ u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ u32 loc_rom_base; /* 24h : Local ROM Base */ u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */ u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ }; #define PLX_9050_LINT1_ENABLE 0x01 #define PLX_9050_LINT1_POL 0x02 #define PLX_9050_LINT1_STATUS 0x04 #define PLX_9050_LINT2_ENABLE 0x08 #define PLX_9050_LINT2_POL 0x10 #define PLX_9050_LINT2_STATUS 0x20 #define PLX_9050_INTR_ENABLE 0x40 #define PLX_9050_SW_INTR 0x80 /* Masks to access the init_ctrl PLX register */ #define PC300_CLKSEL_MASK (0x00000004UL) #define PC300_CHMEDIA_MASK(chan) (0x00000020UL<<(chan*3)) #define PC300_CTYPE_MASK (0x00000800UL) /* CPLD Registers (base addr = falcbase, TE only) */ /* CPLD v. 0 */ #define CPLD_REG1 0x140 /* Chip resets, DCD/CTS status */ #define CPLD_REG2 0x144 /* Clock enable , LED control */ /* CPLD v. 2 or higher */ #define CPLD_V2_REG1 0x100 /* Chip resets, DCD/CTS status */ #define CPLD_V2_REG2 0x104 /* Clock enable , LED control */ #define CPLD_ID_REG 0x108 /* CPLD version */ /* CPLD Register bit description: for the FALC bits, they should always be set based on the channel (use (bit<<(2*ch)) to access the correct bit for that channel) */ #define CPLD_REG1_FALC_RESET 0x01 #define CPLD_REG1_SCA_RESET 0x02 #define CPLD_REG1_GLOBAL_CLK 0x08 #define CPLD_REG1_FALC_DCD 0x10 #define CPLD_REG1_FALC_CTS 0x20 #define CPLD_REG2_FALC_TX_CLK 0x01 #define CPLD_REG2_FALC_RX_CLK 0x02 #define CPLD_REG2_FALC_LED1 0x10 #define CPLD_REG2_FALC_LED2 0x20 /* Structure with FALC-related fields (TE only) */ #define PC300_FALC_MAXLOOP 0x0000ffff /* for falc_issue_cmd() */ typedef struct falc { u8 sync; /* If true FALC is synchronized */ u8 active; /* if TRUE then already active */ u8 loop_active; /* if TRUE a line loopback UP was received */ u8 loop_gen; /* if TRUE a line loopback UP was issued */ u8 num_channels; u8 offset; /* 1 for T1, 0 for E1 */ u8 full_bandwidth; u8 xmb_cause; u8 multiframe_mode; /* Statistics */ u16 pden; /* Pulse Density violation count */ u16 los; /* Loss of Signal count */ u16 losr; /* Loss of Signal recovery count */ u16 lfa; /* Loss of frame alignment count */ u16 farec; /* Frame Alignment Recovery count */ u16 lmfa; /* Loss of multiframe alignment count */ u16 ais; /* Remote Alarm indication Signal count */ u16 sec; /* One-second timer */ u16 es; /* Errored second */ u16 rai; /* remote alarm received */ u16 bec; u16 fec; u16 cvc; u16 cec; u16 ebc; /* Status */ u8 red_alarm; u8 blue_alarm; u8 loss_fa; u8 yellow_alarm; u8 loss_mfa; u8 prbs; } falc_t; typedef struct falc_status { u8 sync; /* If true FALC is synchronized */ u8 red_alarm; u8 blue_alarm; u8 loss_fa; u8 yellow_alarm; u8 loss_mfa; u8 prbs; } falc_status_t; typedef struct rsv_x21_status { u8 dcd; u8 dsr; u8 cts; u8 rts; u8 dtr; } rsv_x21_status_t; typedef struct pc300stats { int hw_type; u32 line_on; u32 line_off; struct net_device_stats gen_stats; falc_t te_stats; } pc300stats_t; typedef struct pc300status { int hw_type; rsv_x21_status_t gen_status; falc_status_t te_status; } pc300status_t; typedef struct pc300loopback { char loop_type; char loop_on; } pc300loopback_t; typedef struct pc300patterntst { char patrntst_on; /* 0 - off; 1 - on; 2 - read num_errors */ u16 num_errors; } pc300patterntst_t; typedef struct pc300dev { struct pc300ch *chan; u8 trace_on; u32 line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ u32 line_off; char name[16]; struct net_device *dev; #ifdef CONFIG_PC300_MLPPP void *cpc_tty; /* information to PC300 TTY driver */ #endif }pc300dev_t; typedef struct pc300hw { int type; /* RSV, X21, etc. */ int bus; /* Bus (PCI, PMC, etc.) */ int nchan; /* number of channels */ int irq; /* interrupt request level */ u32 clock; /* Board clock */ u8 cpld_id; /* CPLD ID (TE only) */ u16 cpld_reg1; /* CPLD reg 1 (TE only) */ u16 cpld_reg2; /* CPLD reg 2 (TE only) */ u16 gpioc_reg; /* PLX GPIOC reg */ u16 intctl_reg; /* PLX Int Ctrl/Status reg */ u32 iophys; /* PLX registers I/O base */ u32 iosize; /* PLX registers I/O size */ u32 plxphys; /* PLX registers MMIO base (physical) */ void __iomem * plxbase; /* PLX registers MMIO base (virtual) */ u32 plxsize; /* PLX registers MMIO size */ u32 scaphys; /* SCA registers MMIO base (physical) */ void __iomem * scabase; /* SCA registers MMIO base (virtual) */ u32 scasize; /* SCA registers MMIO size */ u32 ramphys; /* On-board RAM MMIO base (physical) */ void __iomem * rambase; /* On-board RAM MMIO base (virtual) */ u32 alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ u32 ramsize; /* On-board RAM MMIO size */ u32 falcphys; /* FALC registers MMIO base (physical) */ void __iomem * falcbase;/* FALC registers MMIO base (virtual) */ u32 falcsize; /* FALC registers MMIO size */ } pc300hw_t; typedef struct pc300chconf { sync_serial_settings phys_settings; /* Clock type/rate (in bps), loopback mode */ raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ u32 media; /* HW media (RS232, V.35, etc.) */ u32 proto; /* Protocol (PPP, X.25, etc.) */ /* TE-specific parameters */ u8 lcode; /* Line Code (AMI, B8ZS, etc.) */ u8 fr_mode; /* Frame Mode (ESF, D4, etc.) */ u8 lbo; /* Line Build Out */ u8 rx_sens; /* Rx Sensitivity (long- or short-haul) */ u32 tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ } pc300chconf_t; typedef struct pc300ch { struct pc300 *card; int channel; pc300dev_t d; pc300chconf_t conf; u8 tx_first_bd; /* First TX DMA block descr. w/ data */ u8 tx_next_bd; /* Next free TX DMA block descriptor */ u8 rx_first_bd; /* First free RX DMA block descriptor */ u8 rx_last_bd; /* Last free RX DMA block descriptor */ u8 nfree_tx_bd; /* Number of free TX DMA block descriptors */ falc_t falc; /* FALC structure (TE only) */ } pc300ch_t; typedef struct pc300 { pc300hw_t hw; /* hardware config. */ pc300ch_t chan[PC300_MAXCHAN]; spinlock_t card_lock; } pc300_t; typedef struct pc300conf { pc300hw_t hw; pc300chconf_t conf; } pc300conf_t; /* DEV ioctl() commands */ #define N_SPPP_IOCTLS 2 enum pc300_ioctl_cmds { SIOCCPCRESERVED = (SIOCDEVPRIVATE + N_SPPP_IOCTLS), SIOCGPC300CONF, SIOCSPC300CONF, SIOCGPC300STATUS, SIOCGPC300FALCSTATUS, SIOCGPC300UTILSTATS, SIOCGPC300UTILSTATUS, SIOCSPC300TRACE, SIOCSPC300LOOPBACK, SIOCSPC300PATTERNTEST, }; /* Loopback types - PC300/TE boards */ enum pc300_loopback_cmds { PC300LOCLOOP = 1, PC300REMLOOP, PC300PAYLOADLOOP, PC300GENLOOPUP, PC300GENLOOPDOWN, }; /* Control Constant Definitions */ #define PC300_RSV 0x01 #define PC300_X21 0x02 #define PC300_TE 0x03 #define PC300_PCI 0x00 #define PC300_PMC 0x01 #define PC300_LC_AMI 0x01 #define PC300_LC_B8ZS 0x02 #define PC300_LC_NRZ 0x03 #define PC300_LC_HDB3 0x04 /* Framing (T1) */ #define PC300_FR_ESF 0x01 #define PC300_FR_D4 0x02 #define PC300_FR_ESF_JAPAN 0x03 /* Framing (E1) */ #define PC300_FR_MF_CRC4 0x04 #define PC300_FR_MF_NON_CRC4 0x05 #define PC300_FR_UNFRAMED 0x06 #define PC300_LBO_0_DB 0x00 #define PC300_LBO_7_5_DB 0x01 #define PC300_LBO_15_DB 0x02 #define PC300_LBO_22_5_DB 0x03 #define PC300_RX_SENS_SH 0x01 #define PC300_RX_SENS_LH 0x02 #define PC300_TX_TIMEOUT (2*HZ) #define PC300_TX_QUEUE_LEN 100 #define PC300_DEF_MTU 1600 /* Function Prototypes */ int cpc_open(struct net_device *dev); #endif /* _PC300_H */