/* * Sealevel Systems 4021 driver. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * (c) Copyright 1999, 2001 Alan Cox * (c) Copyright 2001 Red Hat Inc. * */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/net.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/if_arp.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/init.h> #include <net/arp.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/byteorder.h> #include <net/syncppp.h> #include "z85230.h" struct slvl_device { void *if_ptr; /* General purpose pointer (used by SPPP) */ struct z8530_channel *chan; struct ppp_device pppdev; int channel; }; struct slvl_board { struct slvl_device *dev[2]; struct z8530_dev board; int iobase; }; /* * Network driver support routines */ /* * Frame receive. Simple for our card as we do sync ppp and there * is no funny garbage involved */ static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb) { /* Drop the CRC - it's not a good idea to try and negotiate it ;) */ skb_trim(skb, skb->len-2); skb->protocol=htons(ETH_P_WAN_PPP); skb->mac.raw=skb->data; skb->dev=c->netdevice; /* * Send it to the PPP layer. We don't have time to process * it right now. */ netif_rx(skb); c->netdevice->last_rx = jiffies; } /* * We've been placed in the UP state */ static int sealevel_open(struct net_device *d) { struct slvl_device *slvl=d->priv; int err = -1; int unit = slvl->channel; /* * Link layer up. */ switch(unit) { case 0: err=z8530_sync_dma_open(d, slvl->chan); break; case 1: err=z8530_sync_open(d, slvl->chan); break; } if(err) return err; /* * Begin PPP */ err=sppp_open(d); if(err) { switch(unit) { case 0: z8530_sync_dma_close(d, slvl->chan); break; case 1: z8530_sync_close(d, slvl->chan); break; } return err; } slvl->chan->rx_function=sealevel_input; /* * Go go go */ netif_start_queue(d); return 0; } static int sealevel_close(struct net_device *d) { struct slvl_device *slvl=d->priv; int unit = slvl->channel; /* * Discard new frames */ slvl->chan->rx_function=z8530_null_rx; /* * PPP off */ sppp_close(d); /* * Link layer down */ netif_stop_queue(d); switch(unit) { case 0: z8530_sync_dma_close(d, slvl->chan); break; case 1: z8530_sync_close(d, slvl->chan); break; } return 0; } static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd) { /* struct slvl_device *slvl=d->priv; z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */ return sppp_do_ioctl(d, ifr,cmd); } static struct net_device_stats *sealevel_get_stats(struct net_device *d) { struct slvl_device *slvl=d->priv; if(slvl) return z8530_get_stats(slvl->chan); else return NULL; } /* * Passed PPP frames, fire them downwind. */ static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d) { struct slvl_device *slvl=d->priv; return z8530_queue_xmit(slvl->chan, skb); } static int sealevel_neigh_setup(struct neighbour *n) { if (n->nud_state == NUD_NONE) { n->ops = &arp_broken_ops; n->output = n->ops->output; } return 0; } static int sealevel_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p) { if (p->tbl->family == AF_INET) { p->neigh_setup = sealevel_neigh_setup; p->ucast_probes = 0; p->mcast_probes = 0; } return 0; } static int sealevel_attach(struct net_device *dev) { struct slvl_device *sv = dev->priv; sppp_attach(&sv->pppdev); return 0; } static void sealevel_detach(struct net_device *dev) { sppp_detach(dev); } static void slvl_setup(struct net_device *d) { d->open = sealevel_open; d->stop = sealevel_close; d->init = sealevel_attach; d->uninit = sealevel_detach; d->hard_start_xmit = sealevel_queue_xmit; d->get_stats = sealevel_get_stats; d->set_multicast_list = NULL; d->do_ioctl = sealevel_ioctl; d->neigh_setup = sealevel_neigh_setup_dev; d->set_mac_address = NULL; } static inline struct slvl_device *slvl_alloc(int iobase, int irq) { struct net_device *d; struct slvl_device *sv; d = alloc_netdev(sizeof(struct slvl_device), "hdlc%d", slvl_setup); if (!d) return NULL; sv = d->priv; sv->if_ptr = &sv->pppdev; sv->pppdev.dev = d; d->base_addr = iobase; d->irq = irq; return sv; } /* * Allocate and setup Sealevel board. */ static __init struct slvl_board *slvl_init(int iobase, int irq, int txdma, int rxdma, int slow) { struct z8530_dev *dev; struct slvl_board *b; /* * Get the needed I/O space */ if(!request_region(iobase, 8, "Sealevel 4021")) { printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase); return NULL; } b = kmalloc(sizeof(struct slvl_board), GFP_KERNEL); if(!b) goto fail3; memset(b, 0, sizeof(*b)); if (!(b->dev[0]= slvl_alloc(iobase, irq))) goto fail2; b->dev[0]->chan = &b->board.chanA; b->dev[0]->channel = 0; if (!(b->dev[1] = slvl_alloc(iobase, irq))) goto fail1_0; b->dev[1]->chan = &b->board.chanB; b->dev[1]->channel = 1; dev = &b->board; /* * Stuff in the I/O addressing */ dev->active = 0; b->iobase = iobase; /* * Select 8530 delays for the old board */ if(slow) iobase |= Z8530_PORT_SLEEP; dev->chanA.ctrlio=iobase+1; dev->chanA.dataio=iobase; dev->chanB.ctrlio=iobase+3; dev->chanB.dataio=iobase+2; dev->chanA.irqs=&z8530_nop; dev->chanB.irqs=&z8530_nop; /* * Assert DTR enable DMA */ outb(3|(1<<7), b->iobase+4); /* We want a fast IRQ for this device. Actually we'd like an even faster IRQ ;) - This is one driver RtLinux is made for */ if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0) { printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq); goto fail1_1; } dev->irq=irq; dev->chanA.private=&b->dev[0]; dev->chanB.private=&b->dev[1]; dev->chanA.netdevice=b->dev[0]->pppdev.dev; dev->chanB.netdevice=b->dev[1]->pppdev.dev; dev->chanA.dev=dev; dev->chanB.dev=dev; dev->chanA.txdma=3; dev->chanA.rxdma=1; if(request_dma(dev->chanA.txdma, "SeaLevel (TX)")!=0) goto fail; if(request_dma(dev->chanA.rxdma, "SeaLevel (RX)")!=0) goto dmafail; disable_irq(irq); /* * Begin normal initialise */ if(z8530_init(dev)!=0) { printk(KERN_ERR "Z8530 series device not found.\n"); enable_irq(irq); goto dmafail2; } if(dev->type==Z85C30) { z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream); z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream); } else { z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230); z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230); } /* * Now we can take the IRQ */ enable_irq(irq); if (register_netdev(b->dev[0]->pppdev.dev)) goto dmafail2; if (register_netdev(b->dev[1]->pppdev.dev)) goto fail_unit; z8530_describe(dev, "I/O", iobase); dev->active=1; return b; fail_unit: unregister_netdev(b->dev[0]->pppdev.dev); dmafail2: free_dma(dev->chanA.rxdma); dmafail: free_dma(dev->chanA.txdma); fail: free_irq(irq, dev); fail1_1: free_netdev(b->dev[1]->pppdev.dev); fail1_0: free_netdev(b->dev[0]->pppdev.dev); fail2: kfree(b); fail3: release_region(iobase,8); return NULL; } static void __exit slvl_shutdown(struct slvl_board *b) { int u; z8530_shutdown(&b->board); for(u=0; u<2; u++) { struct net_device *d = b->dev[u]->pppdev.dev; unregister_netdev(d); free_netdev(d); } free_irq(b->board.irq, &b->board); free_dma(b->board.chanA.rxdma); free_dma(b->board.chanA.txdma); /* DMA off on the card, drop DTR */ outb(0, b->iobase); release_region(b->iobase, 8); kfree(b); } static int io=0x238; static int txdma=1; static int rxdma=3; static int irq=5; static int slow=0; module_param(io, int, 0); MODULE_PARM_DESC(io, "The I/O base of the Sealevel card"); module_param(txdma, int, 0); MODULE_PARM_DESC(txdma, "Transmit DMA channel"); module_param(rxdma, int, 0); MODULE_PARM_DESC(rxdma, "Receive DMA channel"); module_param(irq, int, 0); MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card"); module_param(slow, bool, 0); MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012"); MODULE_AUTHOR("Alan Cox"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Modular driver for the SeaLevel 4021"); static struct slvl_board *slvl_unit; static int __init slvl_init_module(void) { #ifdef MODULE printk(KERN_INFO "SeaLevel Z85230 Synchronous Driver v 0.02.\n"); printk(KERN_INFO "(c) Copyright 1998, Building Number Three Ltd.\n"); #endif slvl_unit = slvl_init(io, irq, txdma, rxdma, slow); return slvl_unit ? 0 : -ENODEV; } static void __exit slvl_cleanup_module(void) { if(slvl_unit) slvl_shutdown(slvl_unit); } module_init(slvl_init_module); module_exit(slvl_cleanup_module);