/* * Intel Wireless WiMAX Connection 2400m * Firmware uploader's USB specifics * * * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * * Intel Corporation * Yanir Lubetkin * Inaky Perez-Gonzalez * - Initial implementation * * Inaky Perez-Gonzalez * - bus generic/specific split * * THE PROCEDURE * * See fw.c for the generic description of this procedure. * * This file implements only the USB specifics. It boils down to how * to send a command and waiting for an acknowledgement from the * device. * * This code (and process) is single threaded. It assumes it is the * only thread poking around (guaranteed by fw.c). * * COMMAND EXECUTION * * A write URB is posted with the buffer to the bulk output endpoint. * * ACK RECEPTION * * We just post a URB to the notification endpoint and wait for * data. We repeat until we get all the data we expect (as indicated * by the call from the bus generic code). * * The data is not read from the bulk in endpoint for boot mode. * * ROADMAP * * i2400mu_bus_bm_cmd_send * i2400m_bm_cmd_prepare... * i2400mu_tx_bulk_out * * i2400mu_bus_bm_wait_for_ack * i2400m_notif_submit */ #include #include "i2400m-usb.h" #define D_SUBMODULE fw #include "usb-debug-levels.h" /* * Synchronous write to the device * * Takes care of updating EDC counts and thus, handle device errors. */ static ssize_t i2400mu_tx_bulk_out(struct i2400mu *i2400mu, void *buf, size_t buf_size) { int result; struct device *dev = &i2400mu->usb_iface->dev; int len; struct usb_endpoint_descriptor *epd; int pipe, do_autopm = 1; result = usb_autopm_get_interface(i2400mu->usb_iface); if (result < 0) { dev_err(dev, "BM-CMD: can't get autopm: %d\n", result); do_autopm = 0; } epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.bulk_out); pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress); retry: result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, HZ); switch (result) { case 0: if (len != buf_size) { dev_err(dev, "BM-CMD: short write (%u B vs %zu " "expected)\n", len, buf_size); result = -EIO; break; } result = len; break; case -EINVAL: /* while removing driver */ case -ENODEV: /* dev disconnect ... */ case -ENOENT: /* just ignore it */ case -ESHUTDOWN: /* and exit */ case -ECONNRESET: result = -ESHUTDOWN; break; case -ETIMEDOUT: /* bah... */ break; default: /* any other? */ if (edc_inc(&i2400mu->urb_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { dev_err(dev, "BM-CMD: maximum errors in " "URB exceeded; resetting device\n"); usb_queue_reset_device(i2400mu->usb_iface); result = -ENODEV; break; } dev_err(dev, "BM-CMD: URB error %d, retrying\n", result); goto retry; } result = len; if (do_autopm) usb_autopm_put_interface(i2400mu->usb_iface); return result; } /* * Send a boot-mode command over the bulk-out pipe * * Command can be a raw command, which requires no preparation (and * which might not even be following the command format). Checks that * the right amount of data was transfered. * * To satisfy USB requirements (no onstack, vmalloc or in data segment * buffers), we copy the command to i2400m->bm_cmd_buf and send it from * there. * * @flags: pass thru from i2400m_bm_cmd() * @return: cmd_size if ok, < 0 errno code on error. */ ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *i2400m, const struct i2400m_bootrom_header *_cmd, size_t cmd_size, int flags) { ssize_t result; struct device *dev = i2400m_dev(i2400m); struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd); struct i2400m_bootrom_header *cmd; size_t cmd_size_a = ALIGN(cmd_size, 16); /* USB restriction */ d_fnstart(8, dev, "(i2400m %p cmd %p size %zu)\n", i2400m, _cmd, cmd_size); result = -E2BIG; if (cmd_size > I2400M_BM_CMD_BUF_SIZE) goto error_too_big; memcpy(i2400m->bm_cmd_buf, _cmd, cmd_size); cmd = i2400m->bm_cmd_buf; if (cmd_size_a > cmd_size) /* Zero pad space */ memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size); if ((flags & I2400M_BM_CMD_RAW) == 0) { if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0)) dev_warn(dev, "SW BUG: response_required == 0\n"); i2400m_bm_cmd_prepare(cmd); } result = i2400mu_tx_bulk_out(i2400mu, i2400m->bm_cmd_buf, cmd_size); if (result < 0) { dev_err(dev, "boot-mode cmd %d: cannot send: %zd\n", opcode, result); goto error_cmd_send; } if (result != cmd_size) { /* all was transferred? */ dev_err(dev, "boot-mode cmd %d: incomplete transfer " "(%zu vs %zu submitted)\n", opcode, result, cmd_size); result = -EIO; goto error_cmd_size; } error_cmd_size: error_cmd_send: error_too_big: d_fnend(8, dev, "(i2400m %p cmd %p size %zu) = %zd\n", i2400m, _cmd, cmd_size, result); return result; } static void __i2400mu_bm_notif_cb(struct urb *urb) { complete(urb->context); } /* * submit a read to the notification endpoint * * @i2400m: device descriptor * @urb: urb to use * @completion: completion varible to complete when done * * Data is always read to i2400m->bm_ack_buf */ static int i2400mu_notif_submit(struct i2400mu *i2400mu, struct urb *urb, struct completion *completion) { struct i2400m *i2400m = &i2400mu->i2400m; struct usb_endpoint_descriptor *epd; int pipe; epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.notification); pipe = usb_rcvintpipe(i2400mu->usb_dev, epd->bEndpointAddress); usb_fill_int_urb(urb, i2400mu->usb_dev, pipe, i2400m->bm_ack_buf, I2400M_BM_ACK_BUF_SIZE, __i2400mu_bm_notif_cb, completion, epd->bInterval); return usb_submit_urb(urb, GFP_KERNEL); } /* * Read an ack from the notification endpoint * * @i2400m: * @_ack: pointer to where to store the read data * @ack_size: how many bytes we should read * * Returns: < 0 errno code on error; otherwise, amount of received bytes. * * Submits a notification read, appends the read data to the given ack * buffer and then repeats (until @ack_size bytes have been * received). */ ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *i2400m, struct i2400m_bootrom_header *_ack, size_t ack_size) { ssize_t result = -ENOMEM; struct device *dev = i2400m_dev(i2400m); struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); struct urb notif_urb; void *ack = _ack; size_t offset, len; long val; int do_autopm = 1; DECLARE_COMPLETION_ONSTACK(notif_completion); d_fnstart(8, dev, "(i2400m %p ack %p size %zu)\n", i2400m, ack, ack_size); BUG_ON(_ack == i2400m->bm_ack_buf); result = usb_autopm_get_interface(i2400mu->usb_iface); if (result < 0) { dev_err(dev, "BM-ACK: can't get autopm: %d\n", (int) result); do_autopm = 0; } usb_init_urb(¬if_urb); /* ready notifications */ usb_get_urb(¬if_urb); offset = 0; while (offset < ack_size) { init_completion(¬if_completion); result = i2400mu_notif_submit(i2400mu, ¬if_urb, ¬if_completion); if (result < 0) goto error_notif_urb_submit; val = wait_for_completion_interruptible_timeout( ¬if_completion, HZ); if (val == 0) { result = -ETIMEDOUT; usb_kill_urb(¬if_urb); /* Timedout */ goto error_notif_wait; } if (val == -ERESTARTSYS) { result = -EINTR; /* Interrupted */ usb_kill_urb(¬if_urb); goto error_notif_wait; } result = notif_urb.status; /* How was the ack? */ switch (result) { case 0: break; case -EINVAL: /* while removing driver */ case -ENODEV: /* dev disconnect ... */ case -ENOENT: /* just ignore it */ case -ESHUTDOWN: /* and exit */ case -ECONNRESET: result = -ESHUTDOWN; goto error_dev_gone; default: /* any other? */ usb_kill_urb(¬if_urb); /* Timedout */ if (edc_inc(&i2400mu->urb_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) goto error_exceeded; dev_err(dev, "BM-ACK: URB error %d, " "retrying\n", notif_urb.status); continue; /* retry */ } if (notif_urb.actual_length == 0) { d_printf(6, dev, "ZLP received, retrying\n"); continue; } /* Got data, append it to the buffer */ len = min(ack_size - offset, (size_t) notif_urb.actual_length); memcpy(ack + offset, i2400m->bm_ack_buf, len); offset += len; } result = offset; error_notif_urb_submit: error_notif_wait: error_dev_gone: out: if (do_autopm) usb_autopm_put_interface(i2400mu->usb_iface); d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %zd\n", i2400m, ack, ack_size, result); return result; error_exceeded: dev_err(dev, "bm: maximum errors in notification URB exceeded; " "resetting device\n"); usb_queue_reset_device(i2400mu->usb_iface); goto out; }