#ifndef BCM43xx_H_ #define BCM43xx_H_ #include #include #include #include #include #include #include #include #include #include #include #include "bcm43xx_debugfs.h" #include "bcm43xx_leds.h" #define PFX KBUILD_MODNAME ": " #define BCM43xx_SWITCH_CORE_MAX_RETRIES 50 #define BCM43xx_IRQWAIT_MAX_RETRIES 100 #define BCM43xx_IO_SIZE 8192 /* Active Core PCI Configuration Register. */ #define BCM43xx_PCICFG_ACTIVE_CORE 0x80 /* SPROM control register. */ #define BCM43xx_PCICFG_SPROMCTL 0x88 /* Interrupt Control PCI Configuration Register. (Only on PCI cores with rev >= 6) */ #define BCM43xx_PCICFG_ICR 0x94 /* MMIO offsets */ #define BCM43xx_MMIO_DMA0_REASON 0x20 #define BCM43xx_MMIO_DMA0_IRQ_MASK 0x24 #define BCM43xx_MMIO_DMA1_REASON 0x28 #define BCM43xx_MMIO_DMA1_IRQ_MASK 0x2C #define BCM43xx_MMIO_DMA2_REASON 0x30 #define BCM43xx_MMIO_DMA2_IRQ_MASK 0x34 #define BCM43xx_MMIO_DMA3_REASON 0x38 #define BCM43xx_MMIO_DMA3_IRQ_MASK 0x3C #define BCM43xx_MMIO_DMA4_REASON 0x40 #define BCM43xx_MMIO_DMA4_IRQ_MASK 0x44 #define BCM43xx_MMIO_DMA5_REASON 0x48 #define BCM43xx_MMIO_DMA5_IRQ_MASK 0x4C #define BCM43xx_MMIO_STATUS_BITFIELD 0x120 #define BCM43xx_MMIO_STATUS2_BITFIELD 0x124 #define BCM43xx_MMIO_GEN_IRQ_REASON 0x128 #define BCM43xx_MMIO_GEN_IRQ_MASK 0x12C #define BCM43xx_MMIO_RAM_CONTROL 0x130 #define BCM43xx_MMIO_RAM_DATA 0x134 #define BCM43xx_MMIO_PS_STATUS 0x140 #define BCM43xx_MMIO_RADIO_HWENABLED_HI 0x158 #define BCM43xx_MMIO_SHM_CONTROL 0x160 #define BCM43xx_MMIO_SHM_DATA 0x164 #define BCM43xx_MMIO_SHM_DATA_UNALIGNED 0x166 #define BCM43xx_MMIO_XMITSTAT_0 0x170 #define BCM43xx_MMIO_XMITSTAT_1 0x174 #define BCM43xx_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */ #define BCM43xx_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */ /* 32-bit DMA */ #define BCM43xx_MMIO_DMA32_BASE0 0x200 #define BCM43xx_MMIO_DMA32_BASE1 0x220 #define BCM43xx_MMIO_DMA32_BASE2 0x240 #define BCM43xx_MMIO_DMA32_BASE3 0x260 #define BCM43xx_MMIO_DMA32_BASE4 0x280 #define BCM43xx_MMIO_DMA32_BASE5 0x2A0 /* 64-bit DMA */ #define BCM43xx_MMIO_DMA64_BASE0 0x200 #define BCM43xx_MMIO_DMA64_BASE1 0x240 #define BCM43xx_MMIO_DMA64_BASE2 0x280 #define BCM43xx_MMIO_DMA64_BASE3 0x2C0 #define BCM43xx_MMIO_DMA64_BASE4 0x300 #define BCM43xx_MMIO_DMA64_BASE5 0x340 /* PIO */ #define BCM43xx_MMIO_PIO1_BASE 0x300 #define BCM43xx_MMIO_PIO2_BASE 0x310 #define BCM43xx_MMIO_PIO3_BASE 0x320 #define BCM43xx_MMIO_PIO4_BASE 0x330 #define BCM43xx_MMIO_PHY_VER 0x3E0 #define BCM43xx_MMIO_PHY_RADIO 0x3E2 #define BCM43xx_MMIO_ANTENNA 0x3E8 #define BCM43xx_MMIO_CHANNEL 0x3F0 #define BCM43xx_MMIO_CHANNEL_EXT 0x3F4 #define BCM43xx_MMIO_RADIO_CONTROL 0x3F6 #define BCM43xx_MMIO_RADIO_DATA_HIGH 0x3F8 #define BCM43xx_MMIO_RADIO_DATA_LOW 0x3FA #define BCM43xx_MMIO_PHY_CONTROL 0x3FC #define BCM43xx_MMIO_PHY_DATA 0x3FE #define BCM43xx_MMIO_MACFILTER_CONTROL 0x420 #define BCM43xx_MMIO_MACFILTER_DATA 0x422 #define BCM43xx_MMIO_RADIO_HWENABLED_LO 0x49A #define BCM43xx_MMIO_GPIO_CONTROL 0x49C #define BCM43xx_MMIO_GPIO_MASK 0x49E #define BCM43xx_MMIO_TSF_0 0x632 /* core rev < 3 only */ #define BCM43xx_MMIO_TSF_1 0x634 /* core rev < 3 only */ #define BCM43xx_MMIO_TSF_2 0x636 /* core rev < 3 only */ #define BCM43xx_MMIO_TSF_3 0x638 /* core rev < 3 only */ #define BCM43xx_MMIO_RNG 0x65A #define BCM43xx_MMIO_POWERUP_DELAY 0x6A8 /* SPROM offsets. */ #define BCM43xx_SPROM_BASE 0x1000 #define BCM43xx_SPROM_BOARDFLAGS2 0x1c #define BCM43xx_SPROM_IL0MACADDR 0x24 #define BCM43xx_SPROM_ET0MACADDR 0x27 #define BCM43xx_SPROM_ET1MACADDR 0x2a #define BCM43xx_SPROM_ETHPHY 0x2d #define BCM43xx_SPROM_BOARDREV 0x2e #define BCM43xx_SPROM_PA0B0 0x2f #define BCM43xx_SPROM_PA0B1 0x30 #define BCM43xx_SPROM_PA0B2 0x31 #define BCM43xx_SPROM_WL0GPIO0 0x32 #define BCM43xx_SPROM_WL0GPIO2 0x33 #define BCM43xx_SPROM_MAXPWR 0x34 #define BCM43xx_SPROM_PA1B0 0x35 #define BCM43xx_SPROM_PA1B1 0x36 #define BCM43xx_SPROM_PA1B2 0x37 #define BCM43xx_SPROM_IDL_TSSI_TGT 0x38 #define BCM43xx_SPROM_BOARDFLAGS 0x39 #define BCM43xx_SPROM_ANTENNA_GAIN 0x3a #define BCM43xx_SPROM_VERSION 0x3f /* BCM43xx_SPROM_BOARDFLAGS values */ #define BCM43xx_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ #define BCM43xx_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ #define BCM43xx_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ #define BCM43xx_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ #define BCM43xx_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ #define BCM43xx_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ #define BCM43xx_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ #define BCM43xx_BFL_ENETADM 0x0080 /* has ADMtek switch */ #define BCM43xx_BFL_ENETVLAN 0x0100 /* can do vlan */ #define BCM43xx_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ #define BCM43xx_BFL_NOPCI 0x0400 /* leaves PCI floating */ #define BCM43xx_BFL_FEM 0x0800 /* supports the Front End Module */ #define BCM43xx_BFL_EXTLNA 0x1000 /* has an external LNA */ #define BCM43xx_BFL_HGPA 0x2000 /* had high gain PA */ #define BCM43xx_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ #define BCM43xx_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ /* GPIO register offset, in both ChipCommon and PCI core. */ #define BCM43xx_GPIO_CONTROL 0x6c /* SHM Routing */ #define BCM43xx_SHM_SHARED 0x0001 #define BCM43xx_SHM_WIRELESS 0x0002 #define BCM43xx_SHM_PCM 0x0003 #define BCM43xx_SHM_HWMAC 0x0004 #define BCM43xx_SHM_UCODE 0x0300 /* MacFilter offsets. */ #define BCM43xx_MACFILTER_SELF 0x0000 #define BCM43xx_MACFILTER_ASSOC 0x0003 /* Chipcommon registers. */ #define BCM43xx_CHIPCOMMON_CAPABILITIES 0x04 #define BCM43xx_CHIPCOMMON_CTL 0x28 #define BCM43xx_CHIPCOMMON_PLLONDELAY 0xB0 #define BCM43xx_CHIPCOMMON_FREFSELDELAY 0xB4 #define BCM43xx_CHIPCOMMON_SLOWCLKCTL 0xB8 #define BCM43xx_CHIPCOMMON_SYSCLKCTL 0xC0 /* PCI core specific registers. */ #define BCM43xx_PCICORE_BCAST_ADDR 0x50 #define BCM43xx_PCICORE_BCAST_DATA 0x54 #define BCM43xx_PCICORE_SBTOPCI2 0x108 /* SBTOPCI2 values. */ #define BCM43xx_SBTOPCI2_PREFETCH 0x4 #define BCM43xx_SBTOPCI2_BURST 0x8 #define BCM43xx_SBTOPCI2_MEMREAD_MULTI 0x20 /* PCI-E core registers. */ #define BCM43xx_PCIECORE_REG_ADDR 0x0130 #define BCM43xx_PCIECORE_REG_DATA 0x0134 #define BCM43xx_PCIECORE_MDIO_CTL 0x0128 #define BCM43xx_PCIECORE_MDIO_DATA 0x012C /* PCI-E registers. */ #define BCM43xx_PCIE_TLP_WORKAROUND 0x0004 #define BCM43xx_PCIE_DLLP_LINKCTL 0x0100 /* PCI-E MDIO bits. */ #define BCM43xx_PCIE_MDIO_ST 0x40000000 #define BCM43xx_PCIE_MDIO_WT 0x10000000 #define BCM43xx_PCIE_MDIO_DEV 22 #define BCM43xx_PCIE_MDIO_REG 18 #define BCM43xx_PCIE_MDIO_TA 0x00020000 #define BCM43xx_PCIE_MDIO_TC 0x0100 /* MDIO devices. */ #define BCM43xx_MDIO_SERDES_RX 0x1F /* SERDES RX registers. */ #define BCM43xx_SERDES_RXTIMER 0x2 #define BCM43xx_SERDES_CDR 0x6 #define BCM43xx_SERDES_CDR_BW 0x7 /* Chipcommon capabilities. */ #define BCM43xx_CAPABILITIES_PCTL 0x00040000 #define BCM43xx_CAPABILITIES_PLLMASK 0x00030000 #define BCM43xx_CAPABILITIES_PLLSHIFT 16 #define BCM43xx_CAPABILITIES_FLASHMASK 0x00000700 #define BCM43xx_CAPABILITIES_FLASHSHIFT 8 #define BCM43xx_CAPABILITIES_EXTBUSPRESENT 0x00000040 #define BCM43xx_CAPABILITIES_UARTGPIO 0x00000020 #define BCM43xx_CAPABILITIES_UARTCLOCKMASK 0x00000018 #define BCM43xx_CAPABILITIES_UARTCLOCKSHIFT 3 #define BCM43xx_CAPABILITIES_MIPSBIGENDIAN 0x00000004 #define BCM43xx_CAPABILITIES_NRUARTSMASK 0x00000003 /* PowerControl */ #define BCM43xx_PCTL_IN 0xB0 #define BCM43xx_PCTL_OUT 0xB4 #define BCM43xx_PCTL_OUTENABLE 0xB8 #define BCM43xx_PCTL_XTAL_POWERUP 0x40 #define BCM43xx_PCTL_PLL_POWERDOWN 0x80 /* PowerControl Clock Modes */ #define BCM43xx_PCTL_CLK_FAST 0x00 #define BCM43xx_PCTL_CLK_SLOW 0x01 #define BCM43xx_PCTL_CLK_DYNAMIC 0x02 #define BCM43xx_PCTL_FORCE_SLOW 0x0800 #define BCM43xx_PCTL_FORCE_PLL 0x1000 #define BCM43xx_PCTL_DYN_XTAL 0x2000 /* COREIDs */ #define BCM43xx_COREID_CHIPCOMMON 0x800 #define BCM43xx_COREID_ILINE20 0x801 #define BCM43xx_COREID_SDRAM 0x803 #define BCM43xx_COREID_PCI 0x804 #define BCM43xx_COREID_MIPS 0x805 #define BCM43xx_COREID_ETHERNET 0x806 #define BCM43xx_COREID_V90 0x807 #define BCM43xx_COREID_USB11_HOSTDEV 0x80a #define BCM43xx_COREID_IPSEC 0x80b #define BCM43xx_COREID_PCMCIA 0x80d #define BCM43xx_COREID_EXT_IF 0x80f #define BCM43xx_COREID_80211 0x812 #define BCM43xx_COREID_MIPS_3302 0x816 #define BCM43xx_COREID_USB11_HOST 0x817 #define BCM43xx_COREID_USB11_DEV 0x818 #define BCM43xx_COREID_USB20_HOST 0x819 #define BCM43xx_COREID_USB20_DEV 0x81a #define BCM43xx_COREID_SDIO_HOST 0x81b #define BCM43xx_COREID_PCIE 0x820 /* Core Information Registers */ #define BCM43xx_CIR_BASE 0xf00 #define BCM43xx_CIR_SBTPSFLAG (BCM43xx_CIR_BASE + 0x18) #define BCM43xx_CIR_SBIMSTATE (BCM43xx_CIR_BASE + 0x90) #define BCM43xx_CIR_SBINTVEC (BCM43xx_CIR_BASE + 0x94) #define BCM43xx_CIR_SBTMSTATELOW (BCM43xx_CIR_BASE + 0x98) #define BCM43xx_CIR_SBTMSTATEHIGH (BCM43xx_CIR_BASE + 0x9c) #define BCM43xx_CIR_SBIMCONFIGLOW (BCM43xx_CIR_BASE + 0xa8) #define BCM43xx_CIR_SB_ID_HI (BCM43xx_CIR_BASE + 0xfc) /* Mask to get the Backplane Flag Number from SBTPSFLAG. */ #define BCM43xx_BACKPLANE_FLAG_NR_MASK 0x3f /* SBIMCONFIGLOW values/masks. */ #define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK 0x00000007 #define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT 0 #define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK 0x00000070 #define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT 4 #define BCM43xx_SBIMCONFIGLOW_CONNID_MASK 0x00ff0000 #define BCM43xx_SBIMCONFIGLOW_CONNID_SHIFT 16 /* sbtmstatelow state flags */ #define BCM43xx_SBTMSTATELOW_RESET 0x01 #define BCM43xx_SBTMSTATELOW_REJECT 0x02 #define BCM43xx_SBTMSTATELOW_CLOCK 0x10000 #define BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK 0x20000 #define BCM43xx_SBTMSTATELOW_G_MODE_ENABLE 0x20000000 /* sbtmstatehigh state flags */ #define BCM43xx_SBTMSTATEHIGH_SERROR 0x00000001 #define BCM43xx_SBTMSTATEHIGH_BUSY 0x00000004 #define BCM43xx_SBTMSTATEHIGH_TIMEOUT 0x00000020 #define BCM43xx_SBTMSTATEHIGH_G_PHY_AVAIL 0x00010000 #define BCM43xx_SBTMSTATEHIGH_A_PHY_AVAIL 0x00020000 #define BCM43xx_SBTMSTATEHIGH_COREFLAGS 0x1FFF0000 #define BCM43xx_SBTMSTATEHIGH_DMA64BIT 0x10000000 #define BCM43xx_SBTMSTATEHIGH_GATEDCLK 0x20000000 #define BCM43xx_SBTMSTATEHIGH_BISTFAILED 0x40000000 #define BCM43xx_SBTMSTATEHIGH_BISTCOMPLETE 0x80000000 /* sbimstate flags */ #define BCM43xx_SBIMSTATE_IB_ERROR 0x20000 #define BCM43xx_SBIMSTATE_TIMEOUT 0x40000 /* PHYVersioning */ #define BCM43xx_PHYTYPE_A 0x00 #define BCM43xx_PHYTYPE_B 0x01 #define BCM43xx_PHYTYPE_G 0x02 /* PHYRegisters */ #define BCM43xx_PHY_ILT_A_CTRL 0x0072 #define BCM43xx_PHY_ILT_A_DATA1 0x0073 #define BCM43xx_PHY_ILT_A_DATA2 0x0074 #define BCM43xx_PHY_G_LO_CONTROL 0x0810 #define BCM43xx_PHY_ILT_G_CTRL 0x0472 #define BCM43xx_PHY_ILT_G_DATA1 0x0473 #define BCM43xx_PHY_ILT_G_DATA2 0x0474 #define BCM43xx_PHY_A_PCTL 0x007B #define BCM43xx_PHY_G_PCTL 0x0029 #define BCM43xx_PHY_A_CRS 0x0029 #define BCM43xx_PHY_RADIO_BITFIELD 0x0401 #define BCM43xx_PHY_G_CRS 0x0429 #define BCM43xx_PHY_NRSSILT_CTRL 0x0803 #define BCM43xx_PHY_NRSSILT_DATA 0x0804 /* RadioRegisters */ #define BCM43xx_RADIOCTL_ID 0x01 /* StatusBitField */ #define BCM43xx_SBF_MAC_ENABLED 0x00000001 #define BCM43xx_SBF_2 0x00000002 /*FIXME: fix name*/ #define BCM43xx_SBF_CORE_READY 0x00000004 #define BCM43xx_SBF_400 0x00000400 /*FIXME: fix name*/ #define BCM43xx_SBF_4000 0x00004000 /*FIXME: fix name*/ #define BCM43xx_SBF_8000 0x00008000 /*FIXME: fix name*/ #define BCM43xx_SBF_XFER_REG_BYTESWAP 0x00010000 #define BCM43xx_SBF_MODE_NOTADHOC 0x00020000 #define BCM43xx_SBF_MODE_AP 0x00040000 #define BCM43xx_SBF_RADIOREG_LOCK 0x00080000 #define BCM43xx_SBF_MODE_MONITOR 0x00400000 #define BCM43xx_SBF_MODE_PROMISC 0x01000000 #define BCM43xx_SBF_PS1 0x02000000 #define BCM43xx_SBF_PS2 0x04000000 #define BCM43xx_SBF_NO_SSID_BCAST 0x08000000 #define BCM43xx_SBF_TIME_UPDATE 0x10000000 #define BCM43xx_SBF_MODE_G 0x80000000 /* Microcode */ #define BCM43xx_UCODE_REVISION 0x0000 #define BCM43xx_UCODE_PATCHLEVEL 0x0002 #define BCM43xx_UCODE_DATE 0x0004 #define BCM43xx_UCODE_TIME 0x0006 #define BCM43xx_UCODE_STATUS 0x0040 /* MicrocodeFlagsBitfield (addr + lo-word values?)*/ #define BCM43xx_UCODEFLAGS_OFFSET 0x005E #define BCM43xx_UCODEFLAG_AUTODIV 0x0001 #define BCM43xx_UCODEFLAG_UNKBGPHY 0x0002 #define BCM43xx_UCODEFLAG_UNKBPHY 0x0004 #define BCM43xx_UCODEFLAG_UNKGPHY 0x0020 #define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040 #define BCM43xx_UCODEFLAG_JAPAN 0x0080 /* Hardware Radio Enable masks */ #define BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16) #define BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4) /* Generic-Interrupt reasons. */ #define BCM43xx_IRQ_READY (1 << 0) #define BCM43xx_IRQ_BEACON (1 << 1) #define BCM43xx_IRQ_PS (1 << 2) #define BCM43xx_IRQ_REG124 (1 << 5) #define BCM43xx_IRQ_PMQ (1 << 6) #define BCM43xx_IRQ_PIO_WORKAROUND (1 << 8) #define BCM43xx_IRQ_XMIT_ERROR (1 << 11) #define BCM43xx_IRQ_RX (1 << 15) #define BCM43xx_IRQ_SCAN (1 << 16) #define BCM43xx_IRQ_NOISE (1 << 18) #define BCM43xx_IRQ_XMIT_STATUS (1 << 29) #define BCM43xx_IRQ_ALL 0xffffffff #define BCM43xx_IRQ_INITIAL (BCM43xx_IRQ_PS | \ BCM43xx_IRQ_REG124 | \ BCM43xx_IRQ_PMQ | \ BCM43xx_IRQ_XMIT_ERROR | \ BCM43xx_IRQ_RX | \ BCM43xx_IRQ_SCAN | \ BCM43xx_IRQ_NOISE | \ BCM43xx_IRQ_XMIT_STATUS) /* Initial default iw_mode */ #define BCM43xx_INITIAL_IWMODE IW_MODE_INFRA /* Bus type PCI. */ #define BCM43xx_BUSTYPE_PCI 0 /* Bus type Silicone Backplane Bus. */ #define BCM43xx_BUSTYPE_SB 1 /* Bus type PCMCIA. */ #define BCM43xx_BUSTYPE_PCMCIA 2 /* Threshold values. */ #define BCM43xx_MIN_RTS_THRESHOLD 1U #define BCM43xx_MAX_RTS_THRESHOLD 2304U #define BCM43xx_DEFAULT_RTS_THRESHOLD BCM43xx_MAX_RTS_THRESHOLD #define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT 7 #define BCM43xx_DEFAULT_LONG_RETRY_LIMIT 4 /* FIXME: the next line is a guess as to what the maximum RSSI value might be */ #define RX_RSSI_MAX 60 /* Max size of a security key */ #define BCM43xx_SEC_KEYSIZE 16 /* Security algorithms. */ enum { BCM43xx_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */ BCM43xx_SEC_ALGO_WEP, BCM43xx_SEC_ALGO_UNKNOWN, BCM43xx_SEC_ALGO_AES, BCM43xx_SEC_ALGO_WEP104, BCM43xx_SEC_ALGO_TKIP, }; #ifdef assert # undef assert #endif #ifdef CONFIG_BCM43XX_DEBUG #define assert(expr) \ do { \ if (unlikely(!(expr))) { \ printk(KERN_ERR PFX "ASSERTION FAILED (%s) at: %s:%d:%s()\n", \ #expr, __FILE__, __LINE__, __FUNCTION__); \ } \ } while (0) #else #define assert(expr) do { /* nothing */ } while (0) #endif /* rate limited printk(). */ #ifdef printkl # undef printkl #endif #define printkl(f, x...) do { if (printk_ratelimit()) printk(f ,##x); } while (0) /* rate limited printk() for debugging */ #ifdef dprintkl # undef dprintkl #endif #ifdef CONFIG_BCM43XX_DEBUG # define dprintkl printkl #else # define dprintkl(f, x...) do { /* nothing */ } while (0) #endif /* Helper macro for if branches. * An if branch marked with this macro is only taken in DEBUG mode. * Example: * if (DEBUG_ONLY(foo == bar)) { * do something * } * In DEBUG mode, the branch will be taken if (foo == bar). * In non-DEBUG mode, the branch will never be taken. */ #ifdef DEBUG_ONLY # undef DEBUG_ONLY #endif #ifdef CONFIG_BCM43XX_DEBUG # define DEBUG_ONLY(x) (x) #else # define DEBUG_ONLY(x) 0 #endif /* debugging printk() */ #ifdef dprintk # undef dprintk #endif #ifdef CONFIG_BCM43XX_DEBUG # define dprintk(f, x...) do { printk(f ,##x); } while (0) #else # define dprintk(f, x...) do { /* nothing */ } while (0) #endif struct net_device; struct pci_dev; struct bcm43xx_dmaring; struct bcm43xx_pioqueue; struct bcm43xx_initval { u16 offset; u16 size; u32 value; } __attribute__((__packed__)); /* Values for bcm430x_sprominfo.locale */ enum { BCM43xx_LOCALE_WORLD = 0, BCM43xx_LOCALE_THAILAND, BCM43xx_LOCALE_ISRAEL, BCM43xx_LOCALE_JORDAN, BCM43xx_LOCALE_CHINA, BCM43xx_LOCALE_JAPAN, BCM43xx_LOCALE_USA_CANADA_ANZ, BCM43xx_LOCALE_EUROPE, BCM43xx_LOCALE_USA_LOW, BCM43xx_LOCALE_JAPAN_HIGH, BCM43xx_LOCALE_ALL, BCM43xx_LOCALE_NONE, }; #define BCM43xx_SPROM_SIZE 64 /* in 16-bit words. */ struct bcm43xx_sprominfo { u16 boardflags2; u8 il0macaddr[6]; u8 et0macaddr[6]; u8 et1macaddr[6]; u8 et0phyaddr:5; u8 et1phyaddr:5; u8 boardrev; u8 locale:4; u8 antennas_aphy:2; u8 antennas_bgphy:2; u16 pa0b0; u16 pa0b1; u16 pa0b2; u8 wl0gpio0; u8 wl0gpio1; u8 wl0gpio2; u8 wl0gpio3; u8 maxpower_aphy; u8 maxpower_bgphy; u16 pa1b0; u16 pa1b1; u16 pa1b2; u8 idle_tssi_tgt_aphy; u8 idle_tssi_tgt_bgphy; u16 boardflags; u16 antennagain_aphy; u16 antennagain_bgphy; }; /* Value pair to measure the LocalOscillator. */ struct bcm43xx_lopair { s8 low; s8 high; u8 used:1; }; #define BCM43xx_LO_COUNT (14*4) struct bcm43xx_phyinfo { /* Hardware Data */ u8 analog; u8 type; u8 rev; u16 antenna_diversity; u16 savedpctlreg; u16 minlowsig[2]; u16 minlowsigpos[2]; u8 connected:1, calibrated:1, is_locked:1, /* used in bcm43xx_phy_{un}lock() */ dyn_tssi_tbl:1; /* used in bcm43xx_phy_init_tssi2dbm_table() */ /* LO Measurement Data. * Use bcm43xx_get_lopair() to get a value. */ struct bcm43xx_lopair *_lo_pairs; /* TSSI to dBm table in use */ const s8 *tssi2dbm; /* idle TSSI value */ s8 idle_tssi; /* Values from bcm43xx_calc_loopback_gain() */ u16 loopback_gain[2]; /* PHY lock for core.rev < 3 * This lock is only used by bcm43xx_phy_{un}lock() */ spinlock_t lock; /* Firmware. */ const struct firmware *ucode; const struct firmware *pcm; const struct firmware *initvals0; const struct firmware *initvals1; }; struct bcm43xx_radioinfo { u16 manufact; u16 version; u8 revision; /* Desired TX power in dBm Q5.2 */ u16 txpower_desired; /* TX Power control values. */ union { /* B/G PHY */ struct { u16 baseband_atten; u16 radio_atten; u16 txctl1; u16 txctl2; }; /* A PHY */ struct { u16 txpwr_offset; }; }; /* Current Interference Mitigation mode */ int interfmode; /* Stack of saved values from the Interference Mitigation code. * Each value in the stack is layed out as follows: * bit 0-11: offset * bit 12-15: register ID * bit 16-32: value * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT */ #define BCM43xx_INTERFSTACK_SIZE 26 u32 interfstack[BCM43xx_INTERFSTACK_SIZE]; /* Saved values from the NRSSI Slope calculation */ s16 nrssi[2]; s32 nrssislope; /* In memory nrssi lookup table. */ s8 nrssi_lt[64]; /* current channel */ u8 channel; u8 initial_channel; u16 lofcal; u16 initval; u8 enabled:1; /* ACI (adjacent channel interference) flags. */ u8 aci_enable:1, aci_wlan_automatic:1, aci_hw_rssi:1; }; /* Data structures for DMA transmission, per 80211 core. */ struct bcm43xx_dma { struct bcm43xx_dmaring *tx_ring0; struct bcm43xx_dmaring *tx_ring1; struct bcm43xx_dmaring *tx_ring2; struct bcm43xx_dmaring *tx_ring3; struct bcm43xx_dmaring *tx_ring4; struct bcm43xx_dmaring *tx_ring5; struct bcm43xx_dmaring *rx_ring0; struct bcm43xx_dmaring *rx_ring3; /* only available on core.rev < 5 */ }; /* Data structures for PIO transmission, per 80211 core. */ struct bcm43xx_pio { struct bcm43xx_pioqueue *queue0; struct bcm43xx_pioqueue *queue1; struct bcm43xx_pioqueue *queue2; struct bcm43xx_pioqueue *queue3; }; #define BCM43xx_MAX_80211_CORES 2 #ifdef CONFIG_BCM947XX #define core_offset(bcm) (bcm)->current_core_offset #else #define core_offset(bcm) 0 #endif /* Generic information about a core. */ struct bcm43xx_coreinfo { u8 available:1, enabled:1, initialized:1; /** core_rev revision number */ u8 rev; /** Index number for _switch_core() */ u8 index; /** core_id ID number */ u16 id; /** Core-specific data. */ void *priv; }; /* Additional information for each 80211 core. */ struct bcm43xx_coreinfo_80211 { /* PHY device. */ struct bcm43xx_phyinfo phy; /* Radio device. */ struct bcm43xx_radioinfo radio; union { /* DMA context. */ struct bcm43xx_dma dma; /* PIO context. */ struct bcm43xx_pio pio; }; }; /* Context information for a noise calculation (Link Quality). */ struct bcm43xx_noise_calculation { struct bcm43xx_coreinfo *core_at_start; u8 channel_at_start; u8 calculation_running:1; u8 nr_samples; s8 samples[8][4]; }; struct bcm43xx_stats { u8 noise; struct iw_statistics wstats; /* Store the last TX/RX times here for updating the leds. */ unsigned long last_tx; unsigned long last_rx; }; struct bcm43xx_key { u8 enabled:1; u8 algorithm; }; /* Driver initialization status. */ enum { BCM43xx_STAT_UNINIT, /* Uninitialized. */ BCM43xx_STAT_INITIALIZING, /* init_board() in progress. */ BCM43xx_STAT_INITIALIZED, /* Fully operational. */ BCM43xx_STAT_SHUTTINGDOWN, /* free_board() in progress. */ BCM43xx_STAT_RESTARTING, /* controller_restart() called. */ }; #define bcm43xx_status(bcm) atomic_read(&(bcm)->init_status) #define bcm43xx_set_status(bcm, stat) do { \ atomic_set(&(bcm)->init_status, (stat)); \ smp_wmb(); \ } while (0) /* *** THEORY OF LOCKING *** * * We have two different locks in the bcm43xx driver. * => bcm->mutex: General sleeping mutex. Protects struct bcm43xx_private * and the device registers. This mutex does _not_ protect * against concurrency from the IRQ handler. * => bcm->irq_lock: IRQ spinlock. Protects against IRQ handler concurrency. * * Please note that, if you only take the irq_lock, you are not protected * against concurrency from the periodic work handlers. * Most times you want to take _both_ locks. */ struct bcm43xx_private { struct ieee80211_device *ieee; struct ieee80211softmac_device *softmac; struct net_device *net_dev; struct pci_dev *pci_dev; unsigned int irq; void __iomem *mmio_addr; spinlock_t irq_lock; struct mutex mutex; /* Driver initialization status BCM43xx_STAT_*** */ atomic_t init_status; u16 was_initialized:1, /* for PCI suspend/resume. */ __using_pio:1, /* Internal, use bcm43xx_using_pio(). */ bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */ reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */ short_preamble:1, /* TRUE, if short preamble is enabled. */ firmware_norelease:1, /* Do not release the firmware. Used on suspend. */ radio_hw_enable:1; /* TRUE if radio is hardware enabled */ struct bcm43xx_stats stats; /* Bus type we are connected to. * This is currently always BCM43xx_BUSTYPE_PCI */ u8 bustype; u64 dma_mask; u16 board_vendor; u16 board_type; u16 board_revision; u16 chip_id; u8 chip_rev; u8 chip_package; struct bcm43xx_sprominfo sprom; #define BCM43xx_NR_LEDS 4 struct bcm43xx_led leds[BCM43xx_NR_LEDS]; spinlock_t leds_lock; /* The currently active core. */ struct bcm43xx_coreinfo *current_core; #ifdef CONFIG_BCM947XX /** current core memory offset */ u32 current_core_offset; #endif struct bcm43xx_coreinfo *active_80211_core; /* coreinfo structs for all possible cores follow. * Note that a core might not exist. * So check the coreinfo flags before using it. */ struct bcm43xx_coreinfo core_chipcommon; struct bcm43xx_coreinfo core_pci; struct bcm43xx_coreinfo core_80211[ BCM43xx_MAX_80211_CORES ]; /* Additional information, specific to the 80211 cores. */ struct bcm43xx_coreinfo_80211 core_80211_ext[ BCM43xx_MAX_80211_CORES ]; /* Number of available 80211 cores. */ int nr_80211_available; u32 chipcommon_capabilities; /* Reason code of the last interrupt. */ u32 irq_reason; u32 dma_reason[6]; /* saved irq enable/disable state bitfield. */ u32 irq_savedstate; /* Link Quality calculation context. */ struct bcm43xx_noise_calculation noisecalc; /* if > 0 MAC is suspended. if == 0 MAC is enabled. */ int mac_suspended; /* Threshold values. */ //TODO: The RTS thr has to be _used_. Currently, it is only set via WX. u32 rts_threshold; /* Interrupt Service Routine tasklet (bottom-half) */ struct tasklet_struct isr_tasklet; /* Periodic tasks */ struct delayed_work periodic_work; unsigned int periodic_state; struct work_struct restart_work; /* Informational stuff. */ char nick[IW_ESSID_MAX_SIZE + 1]; /* encryption/decryption */ u16 security_offset; struct bcm43xx_key key[54]; u8 default_key_idx; /* Random Number Generator. */ struct hwrng rng; char rng_name[20 + 1]; /* Debugging stuff follows. */ #ifdef CONFIG_BCM43XX_DEBUG struct bcm43xx_dfsentry *dfsentry; #endif }; static inline struct bcm43xx_private * bcm43xx_priv(struct net_device *dev) { return ieee80211softmac_priv(dev); } struct device; static inline struct bcm43xx_private * dev_to_bcm(struct device *dev) { struct net_device *net_dev; struct bcm43xx_private *bcm; net_dev = dev_get_drvdata(dev); bcm = bcm43xx_priv(net_dev); return bcm; } /* Helper function, which returns a boolean. * TRUE, if PIO is used; FALSE, if DMA is used. */ #if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO) static inline int bcm43xx_using_pio(struct bcm43xx_private *bcm) { return bcm->__using_pio; } #elif defined(CONFIG_BCM43XX_DMA) static inline int bcm43xx_using_pio(struct bcm43xx_private *bcm) { return 0; } #elif defined(CONFIG_BCM43XX_PIO) static inline int bcm43xx_using_pio(struct bcm43xx_private *bcm) { return 1; } #else # error "Using neither DMA nor PIO? Confused..." #endif /* Helper functions to access data structures private to the 80211 cores. * Note that we _must_ have an 80211 core mapped when calling * any of these functions. */ static inline struct bcm43xx_coreinfo_80211 * bcm43xx_current_80211_priv(struct bcm43xx_private *bcm) { assert(bcm->current_core->id == BCM43xx_COREID_80211); return bcm->current_core->priv; } static inline struct bcm43xx_pio * bcm43xx_current_pio(struct bcm43xx_private *bcm) { assert(bcm43xx_using_pio(bcm)); return &(bcm43xx_current_80211_priv(bcm)->pio); } static inline struct bcm43xx_dma * bcm43xx_current_dma(struct bcm43xx_private *bcm) { assert(!bcm43xx_using_pio(bcm)); return &(bcm43xx_current_80211_priv(bcm)->dma); } static inline struct bcm43xx_phyinfo * bcm43xx_current_phy(struct bcm43xx_private *bcm) { return &(bcm43xx_current_80211_priv(bcm)->phy); } static inline struct bcm43xx_radioinfo * bcm43xx_current_radio(struct bcm43xx_private *bcm) { return &(bcm43xx_current_80211_priv(bcm)->radio); } static inline struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy, u16 radio_attenuation, u16 baseband_attenuation) { return phy->_lo_pairs + (radio_attenuation + 14 * (baseband_attenuation / 2)); } static inline u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset) { return ioread16(bcm->mmio_addr + core_offset(bcm) + offset); } static inline void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value) { iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset); } static inline u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset) { return ioread32(bcm->mmio_addr + core_offset(bcm) + offset); } static inline void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value) { iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset); } static inline int bcm43xx_pci_read_config16(struct bcm43xx_private *bcm, int offset, u16 *value) { return pci_read_config_word(bcm->pci_dev, offset, value); } static inline int bcm43xx_pci_read_config32(struct bcm43xx_private *bcm, int offset, u32 *value) { return pci_read_config_dword(bcm->pci_dev, offset, value); } static inline int bcm43xx_pci_write_config16(struct bcm43xx_private *bcm, int offset, u16 value) { return pci_write_config_word(bcm->pci_dev, offset, value); } static inline int bcm43xx_pci_write_config32(struct bcm43xx_private *bcm, int offset, u32 value) { return pci_write_config_dword(bcm->pci_dev, offset, value); } /** Limit a value between two limits */ #ifdef limit_value # undef limit_value #endif #define limit_value(value, min, max) \ ({ \ typeof(value) __value = (value); \ typeof(value) __min = (min); \ typeof(value) __max = (max); \ if (__value < __min) \ __value = __min; \ else if (__value > __max) \ __value = __max; \ __value; \ }) /** Helpers to print MAC addresses. */ #define BCM43xx_MACFMT "%02x:%02x:%02x:%02x:%02x:%02x" #define BCM43xx_MACARG(x) ((u8*)(x))[0], ((u8*)(x))[1], \ ((u8*)(x))[2], ((u8*)(x))[3], \ ((u8*)(x))[4], ((u8*)(x))[5] #endif /* BCM43xx_H_ */