/* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c) * * A driver for Hermes or Prism 2 chipset based PCMCIA wireless * adaptors, with Lucent/Agere, Intersil or Symbol firmware. * * Current maintainers (as of 29 September 2003) are: * Pavel Roskin * and David Gibson * * (C) Copyright David Gibson, IBM Corporation 2001-2003. * Copyright (C) 2000 David Gibson, Linuxcare Australia. * With some help from : * Copyright (C) 2001 Jean Tourrilhes, HP Labs * Copyright (C) 2001 Benjamin Herrenschmidt * * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 * * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus * http://www.stud.fh-dortmund.de/~andy/wvlan/ * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License * at http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See * the License for the specific language governing rights and * limitations under the License. * * The initial developer of the original code is David A. Hinds * . Portions created by David * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights * Reserved. * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License version 2 (the "GPL"), in * which case the provisions of the GPL are applicable instead of the * above. If you wish to allow the use of your version of this file * only under the terms of the GPL and not to allow others to use your * version of this file under the MPL, indicate your decision by * deleting the provisions above and replace them with the notice and * other provisions required by the GPL. If you do not delete the * provisions above, a recipient may use your version of this file * under either the MPL or the GPL. */ /* * TODO * o Handle de-encapsulation within network layer, provide 802.11 * headers (patch from Thomas 'Dent' Mirlacher) * o Fix possible races in SPY handling. * o Disconnect wireless extensions from fundamental configuration. * o (maybe) Software WEP support (patch from Stano Meduna). * o (maybe) Use multiple Tx buffers - driver handling queue * rather than firmware. */ /* Locking and synchronization: * * The basic principle is that everything is serialized through a * single spinlock, priv->lock. The lock is used in user, bh and irq * context, so when taken outside hardirq context it should always be * taken with interrupts disabled. The lock protects both the * hardware and the struct orinoco_private. * * Another flag, priv->hw_unavailable indicates that the hardware is * unavailable for an extended period of time (e.g. suspended, or in * the middle of a hard reset). This flag is protected by the * spinlock. All code which touches the hardware should check the * flag after taking the lock, and if it is set, give up on whatever * they are doing and drop the lock again. The orinoco_lock() * function handles this (it unlocks and returns -EBUSY if * hw_unavailable is non-zero). */ #define DRIVER_NAME "orinoco" #include #include #include #include #include #include #include #include #include #include #include #include #include "hermes_rid.h" #include "hermes_dld.h" #include "hw.h" #include "scan.h" #include "mic.h" #include "fw.h" #include "wext.h" #include "main.h" #include "orinoco.h" /********************************************************************/ /* Module information */ /********************************************************************/ MODULE_AUTHOR("Pavel Roskin & " "David Gibson "); MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based " "and similar wireless cards"); MODULE_LICENSE("Dual MPL/GPL"); /* Level of debugging. Used in the macros in orinoco.h */ #ifdef ORINOCO_DEBUG int orinoco_debug = ORINOCO_DEBUG; EXPORT_SYMBOL(orinoco_debug); module_param(orinoco_debug, int, 0644); MODULE_PARM_DESC(orinoco_debug, "Debug level"); #endif static int suppress_linkstatus; /* = 0 */ module_param(suppress_linkstatus, bool, 0644); MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); static int ignore_disconnect; /* = 0 */ module_param(ignore_disconnect, int, 0644); MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); int force_monitor; /* = 0 */ module_param(force_monitor, int, 0644); MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); /********************************************************************/ /* Internal constants */ /********************************************************************/ /* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; #define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) #define ORINOCO_MIN_MTU 256 #define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD) #define MAX_IRQLOOPS_PER_IRQ 10 #define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of * how many events the * device could * legitimately generate */ #define DUMMY_FID 0xFFFF /*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ HERMES_MAX_MULTICAST : 0)*/ #define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) #define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ | HERMES_EV_TX | HERMES_EV_TXEXC \ | HERMES_EV_WTERR | HERMES_EV_INFO \ | HERMES_EV_INFDROP) static const struct ethtool_ops orinoco_ethtool_ops; /********************************************************************/ /* Data types */ /********************************************************************/ /* Beginning of the Tx descriptor, used in TxExc handling */ struct hermes_txexc_data { struct hermes_tx_descriptor desc; __le16 frame_ctl; __le16 duration_id; u8 addr1[ETH_ALEN]; } __attribute__ ((packed)); /* Rx frame header except compatibility 802.3 header */ struct hermes_rx_descriptor { /* Control */ __le16 status; __le32 time; u8 silence; u8 signal; u8 rate; u8 rxflow; __le32 reserved; /* 802.11 header */ __le16 frame_ctl; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctl; u8 addr4[ETH_ALEN]; /* Data length */ __le16 data_len; } __attribute__ ((packed)); struct orinoco_rx_data { struct hermes_rx_descriptor *desc; struct sk_buff *skb; struct list_head list; }; /********************************************************************/ /* Function prototypes */ /********************************************************************/ static void __orinoco_set_multicast_list(struct net_device *dev); /********************************************************************/ /* Internal helper functions */ /********************************************************************/ void set_port_type(struct orinoco_private *priv) { switch (priv->iw_mode) { case IW_MODE_INFRA: priv->port_type = 1; priv->createibss = 0; break; case IW_MODE_ADHOC: if (priv->prefer_port3) { priv->port_type = 3; priv->createibss = 0; } else { priv->port_type = priv->ibss_port; priv->createibss = 1; } break; case IW_MODE_MONITOR: priv->port_type = 3; priv->createibss = 0; break; default: printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", priv->ndev->name); } } /********************************************************************/ /* Device methods */ /********************************************************************/ static int orinoco_open(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); unsigned long flags; int err; if (orinoco_lock(priv, &flags) != 0) return -EBUSY; err = __orinoco_up(dev); if (!err) priv->open = 1; orinoco_unlock(priv, &flags); return err; } static int orinoco_stop(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); int err = 0; /* We mustn't use orinoco_lock() here, because we need to be able to close the interface even if hw_unavailable is set (e.g. as we're released after a PC Card removal) */ spin_lock_irq(&priv->lock); priv->open = 0; err = __orinoco_down(dev); spin_unlock_irq(&priv->lock); return err; } static struct net_device_stats *orinoco_get_stats(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); return &priv->stats; } static void orinoco_set_multicast_list(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); unsigned long flags; if (orinoco_lock(priv, &flags) != 0) { printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " "called when hw_unavailable\n", dev->name); return; } __orinoco_set_multicast_list(dev); orinoco_unlock(priv, &flags); } static int orinoco_change_mtu(struct net_device *dev, int new_mtu) { struct orinoco_private *priv = netdev_priv(dev); if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU)) return -EINVAL; /* MTU + encapsulation + header length */ if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) > (priv->nicbuf_size - ETH_HLEN)) return -EINVAL; dev->mtu = new_mtu; return 0; } /********************************************************************/ /* Tx path */ /********************************************************************/ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; hermes_t *hw = &priv->hw; int err = 0; u16 txfid = priv->txfid; struct ethhdr *eh; int tx_control; unsigned long flags; if (!netif_running(dev)) { printk(KERN_ERR "%s: Tx on stopped device!\n", dev->name); return NETDEV_TX_BUSY; } if (netif_queue_stopped(dev)) { printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", dev->name); return NETDEV_TX_BUSY; } if (orinoco_lock(priv, &flags) != 0) { printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", dev->name); return NETDEV_TX_BUSY; } if (!netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) { /* Oops, the firmware hasn't established a connection, silently drop the packet (this seems to be the safest approach). */ goto drop; } /* Check packet length */ if (skb->len < ETH_HLEN) goto drop; tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; if (priv->encode_alg == IW_ENCODE_ALG_TKIP) tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | HERMES_TXCTRL_MIC; if (priv->has_alt_txcntl) { /* WPA enabled firmwares have tx_cntl at the end of * the 802.11 header. So write zeroed descriptor and * 802.11 header at the same time */ char desc[HERMES_802_3_OFFSET]; __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; memset(&desc, 0, sizeof(desc)); *txcntl = cpu_to_le16(tx_control); err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); if (err) { if (net_ratelimit()) printk(KERN_ERR "%s: Error %d writing Tx " "descriptor to BAP\n", dev->name, err); goto busy; } } else { struct hermes_tx_descriptor desc; memset(&desc, 0, sizeof(desc)); desc.tx_control = cpu_to_le16(tx_control); err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); if (err) { if (net_ratelimit()) printk(KERN_ERR "%s: Error %d writing Tx " "descriptor to BAP\n", dev->name, err); goto busy; } /* Clear the 802.11 header and data length fields - some * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused * if this isn't done. */ hermes_clear_words(hw, HERMES_DATA0, HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); } eh = (struct ethhdr *)skb->data; /* Encapsulate Ethernet-II frames */ if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ struct header_struct { struct ethhdr eth; /* 802.3 header */ u8 encap[6]; /* 802.2 header */ } __attribute__ ((packed)) hdr; /* Strip destination and source from the data */ skb_pull(skb, 2 * ETH_ALEN); /* And move them to a separate header */ memcpy(&hdr.eth, eh, 2 * ETH_ALEN); hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); /* Insert the SNAP header */ if (skb_headroom(skb) < sizeof(hdr)) { printk(KERN_ERR "%s: Not enough headroom for 802.2 headers %d\n", dev->name, skb_headroom(skb)); goto drop; } eh = (struct ethhdr *) skb_push(skb, sizeof(hdr)); memcpy(eh, &hdr, sizeof(hdr)); } err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, txfid, HERMES_802_3_OFFSET); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", dev->name, err); goto busy; } /* Calculate Michael MIC */ if (priv->encode_alg == IW_ENCODE_ALG_TKIP) { u8 mic_buf[MICHAEL_MIC_LEN + 1]; u8 *mic; size_t offset; size_t len; if (skb->len % 2) { /* MIC start is on an odd boundary */ mic_buf[0] = skb->data[skb->len - 1]; mic = &mic_buf[1]; offset = skb->len - 1; len = MICHAEL_MIC_LEN + 1; } else { mic = &mic_buf[0]; offset = skb->len; len = MICHAEL_MIC_LEN; } orinoco_mic(priv->tx_tfm_mic, priv->tkip_key[priv->tx_key].tx_mic, eh->h_dest, eh->h_source, 0 /* priority */, skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic); /* Write the MIC */ err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len, txfid, HERMES_802_3_OFFSET + offset); if (err) { printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", dev->name, err); goto busy; } } /* Finally, we actually initiate the send */ netif_stop_queue(dev); err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, txfid, NULL); if (err) { netif_start_queue(dev); if (net_ratelimit()) printk(KERN_ERR "%s: Error %d transmitting packet\n", dev->name, err); goto busy; } dev->trans_start = jiffies; stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; goto ok; drop: stats->tx_errors++; stats->tx_dropped++; ok: orinoco_unlock(priv, &flags); dev_kfree_skb(skb); return NETDEV_TX_OK; busy: if (err == -EIO) schedule_work(&priv->reset_work); orinoco_unlock(priv, &flags); return NETDEV_TX_BUSY; } static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); u16 fid = hermes_read_regn(hw, ALLOCFID); if (fid != priv->txfid) { if (fid != DUMMY_FID) printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", dev->name, fid); return; } hermes_write_regn(hw, ALLOCFID, DUMMY_FID); } static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; stats->tx_packets++; netif_wake_queue(dev); hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); } static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; u16 fid = hermes_read_regn(hw, TXCOMPLFID); u16 status; struct hermes_txexc_data hdr; int err = 0; if (fid == DUMMY_FID) return; /* Nothing's really happened */ /* Read part of the frame header - we need status and addr1 */ err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(struct hermes_txexc_data), fid, 0); hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); stats->tx_errors++; if (err) { printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " "(FID=%04X error %d)\n", dev->name, fid, err); return; } DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, err, fid); /* We produce a TXDROP event only for retry or lifetime * exceeded, because that's the only status that really mean * that this particular node went away. * Other errors means that *we* screwed up. - Jean II */ status = le16_to_cpu(hdr.desc.status); if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { union iwreq_data wrqu; /* Copy 802.11 dest address. * We use the 802.11 header because the frame may * not be 802.3 or may be mangled... * In Ad-Hoc mode, it will be the node address. * In managed mode, it will be most likely the AP addr * User space will figure out how to convert it to * whatever it needs (IP address or else). * - Jean II */ memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); wrqu.addr.sa_family = ARPHRD_ETHER; /* Send event to user space */ wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); } netif_wake_queue(dev); } static void orinoco_tx_timeout(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; struct hermes *hw = &priv->hw; printk(KERN_WARNING "%s: Tx timeout! " "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", dev->name, hermes_read_regn(hw, ALLOCFID), hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); stats->tx_errors++; schedule_work(&priv->reset_work); } /********************************************************************/ /* Rx path (data frames) */ /********************************************************************/ /* Does the frame have a SNAP header indicating it should be * de-encapsulated to Ethernet-II? */ static inline int is_ethersnap(void *_hdr) { u8 *hdr = _hdr; /* We de-encapsulate all packets which, a) have SNAP headers * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header * and where b) the OUI of the SNAP header is 00:00:00 or * 00:00:f8 - we need both because different APs appear to use * different OUIs for some reason */ return (memcmp(hdr, &encaps_hdr, 5) == 0) && ((hdr[5] == 0x00) || (hdr[5] == 0xf8)); } static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, int level, int noise) { struct iw_quality wstats; wstats.level = level - 0x95; wstats.noise = noise - 0x95; wstats.qual = (level > noise) ? (level - noise) : 0; wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; /* Update spy records */ wireless_spy_update(dev, mac, &wstats); } static void orinoco_stat_gather(struct net_device *dev, struct sk_buff *skb, struct hermes_rx_descriptor *desc) { struct orinoco_private *priv = netdev_priv(dev); /* Using spy support with lots of Rx packets, like in an * infrastructure (AP), will really slow down everything, because * the MAC address must be compared to each entry of the spy list. * If the user really asks for it (set some address in the * spy list), we do it, but he will pay the price. * Note that to get here, you need both WIRELESS_SPY * compiled in AND some addresses in the list !!! */ /* Note : gcc will optimise the whole section away if * WIRELESS_SPY is not defined... - Jean II */ if (SPY_NUMBER(priv)) { orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN, desc->signal, desc->silence); } } /* * orinoco_rx_monitor - handle received monitor frames. * * Arguments: * dev network device * rxfid received FID * desc rx descriptor of the frame * * Call context: interrupt */ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, struct hermes_rx_descriptor *desc) { u32 hdrlen = 30; /* return full header by default */ u32 datalen = 0; u16 fc; int err; int len; struct sk_buff *skb; struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; hermes_t *hw = &priv->hw; len = le16_to_cpu(desc->data_len); /* Determine the size of the header and the data */ fc = le16_to_cpu(desc->frame_ctl); switch (fc & IEEE80211_FCTL_FTYPE) { case IEEE80211_FTYPE_DATA: if ((fc & IEEE80211_FCTL_TODS) && (fc & IEEE80211_FCTL_FROMDS)) hdrlen = 30; else hdrlen = 24; datalen = len; break; case IEEE80211_FTYPE_MGMT: hdrlen = 24; datalen = len; break; case IEEE80211_FTYPE_CTL: switch (fc & IEEE80211_FCTL_STYPE) { case IEEE80211_STYPE_PSPOLL: case IEEE80211_STYPE_RTS: case IEEE80211_STYPE_CFEND: case IEEE80211_STYPE_CFENDACK: hdrlen = 16; break; case IEEE80211_STYPE_CTS: case IEEE80211_STYPE_ACK: hdrlen = 10; break; } break; default: /* Unknown frame type */ break; } /* sanity check the length */ if (datalen > IEEE80211_MAX_DATA_LEN + 12) { printk(KERN_DEBUG "%s: oversized monitor frame, " "data length = %d\n", dev->name, datalen); stats->rx_length_errors++; goto update_stats; } skb = dev_alloc_skb(hdrlen + datalen); if (!skb) { printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", dev->name); goto update_stats; } /* Copy the 802.11 header to the skb */ memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); skb_reset_mac_header(skb); /* If any, copy the data from the card to the skb */ if (datalen > 0) { err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), ALIGN(datalen, 2), rxfid, HERMES_802_2_OFFSET); if (err) { printk(KERN_ERR "%s: error %d reading monitor frame\n", dev->name, err); goto drop; } } skb->dev = dev; skb->ip_summed = CHECKSUM_NONE; skb->pkt_type = PACKET_OTHERHOST; skb->protocol = cpu_to_be16(ETH_P_802_2); stats->rx_packets++; stats->rx_bytes += skb->len; netif_rx(skb); return; drop: dev_kfree_skb_irq(skb); update_stats: stats->rx_errors++; stats->rx_dropped++; } static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; struct iw_statistics *wstats = &priv->wstats; struct sk_buff *skb = NULL; u16 rxfid, status; int length; struct hermes_rx_descriptor *desc; struct orinoco_rx_data *rx_data; int err; desc = kmalloc(sizeof(*desc), GFP_ATOMIC); if (!desc) { printk(KERN_WARNING "%s: Can't allocate space for RX descriptor\n", dev->name); goto update_stats; } rxfid = hermes_read_regn(hw, RXFID); err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), rxfid, 0); if (err) { printk(KERN_ERR "%s: error %d reading Rx descriptor. " "Frame dropped.\n", dev->name, err); goto update_stats; } status = le16_to_cpu(desc->status); if (status & HERMES_RXSTAT_BADCRC) { DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name); stats->rx_crc_errors++; goto update_stats; } /* Handle frames in monitor mode */ if (priv->iw_mode == IW_MODE_MONITOR) { orinoco_rx_monitor(dev, rxfid, desc); goto out; } if (status & HERMES_RXSTAT_UNDECRYPTABLE) { DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", dev->name); wstats->discard.code++; goto update_stats; } length = le16_to_cpu(desc->data_len); /* Sanity checks */ if (length < 3) { /* No for even an 802.2 LLC header */ /* At least on Symbol firmware with PCF we get quite a lot of these legitimately - Poll frames with no data. */ goto out; } if (length > IEEE80211_MAX_DATA_LEN) { printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", dev->name, length); stats->rx_length_errors++; goto update_stats; } /* Payload size does not include Michael MIC. Increase payload * size to read it together with the data. */ if (status & HERMES_RXSTAT_MIC) length += MICHAEL_MIC_LEN; /* We need space for the packet data itself, plus an ethernet header, plus 2 bytes so we can align the IP header on a 32bit boundary, plus 1 byte so we can read in odd length packets from the card, which has an IO granularity of 16 bits */ skb = dev_alloc_skb(length+ETH_HLEN+2+1); if (!skb) { printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", dev->name); goto update_stats; } /* We'll prepend the header, so reserve space for it. The worst case is no decapsulation, when 802.3 header is prepended and nothing is removed. 2 is for aligning the IP header. */ skb_reserve(skb, ETH_HLEN + 2); err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), ALIGN(length, 2), rxfid, HERMES_802_2_OFFSET); if (err) { printk(KERN_ERR "%s: error %d reading frame. " "Frame dropped.\n", dev->name, err); goto drop; } /* Add desc and skb to rx queue */ rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); if (!rx_data) { printk(KERN_WARNING "%s: Can't allocate RX packet\n", dev->name); goto drop; } rx_data->desc = desc; rx_data->skb = skb; list_add_tail(&rx_data->list, &priv->rx_list); tasklet_schedule(&priv->rx_tasklet); return; drop: dev_kfree_skb_irq(skb); update_stats: stats->rx_errors++; stats->rx_dropped++; out: kfree(desc); } static void orinoco_rx(struct net_device *dev, struct hermes_rx_descriptor *desc, struct sk_buff *skb) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; u16 status, fc; int length; struct ethhdr *hdr; status = le16_to_cpu(desc->status); length = le16_to_cpu(desc->data_len); fc = le16_to_cpu(desc->frame_ctl); /* Calculate and check MIC */ if (status & HERMES_RXSTAT_MIC) { int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> HERMES_MIC_KEY_ID_SHIFT); u8 mic[MICHAEL_MIC_LEN]; u8 *rxmic; u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? desc->addr3 : desc->addr2; /* Extract Michael MIC from payload */ rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; skb_trim(skb, skb->len - MICHAEL_MIC_LEN); length -= MICHAEL_MIC_LEN; orinoco_mic(priv->rx_tfm_mic, priv->tkip_key[key_id].rx_mic, desc->addr1, src, 0, /* priority or QoS? */ skb->data, skb->len, &mic[0]); if (memcmp(mic, rxmic, MICHAEL_MIC_LEN)) { union iwreq_data wrqu; struct iw_michaelmicfailure wxmic; printk(KERN_WARNING "%s: " "Invalid Michael MIC in data frame from %pM, " "using key %i\n", dev->name, src, key_id); /* TODO: update stats */ /* Notify userspace */ memset(&wxmic, 0, sizeof(wxmic)); wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; wxmic.flags |= (desc->addr1[0] & 1) ? IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; wxmic.src_addr.sa_family = ARPHRD_ETHER; memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); (void) orinoco_hw_get_tkip_iv(priv, key_id, &wxmic.tsc[0]); memset(&wrqu, 0, sizeof(wrqu)); wrqu.data.length = sizeof(wxmic); wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *) &wxmic); goto drop; } } /* Handle decapsulation * In most cases, the firmware tell us about SNAP frames. * For some reason, the SNAP frames sent by LinkSys APs * are not properly recognised by most firmwares. * So, check ourselves */ if (length >= ENCAPS_OVERHEAD && (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || is_ethersnap(skb->data))) { /* These indicate a SNAP within 802.2 LLC within 802.11 frame which we'll need to de-encapsulate to the original EthernetII frame. */ hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); } else { /* 802.3 frame - prepend 802.3 header as is */ hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); hdr->h_proto = htons(length); } memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); if (fc & IEEE80211_FCTL_FROMDS) memcpy(hdr->h_source, desc->addr3, ETH_ALEN); else memcpy(hdr->h_source, desc->addr2, ETH_ALEN); skb->protocol = eth_type_trans(skb, dev); skb->ip_summed = CHECKSUM_NONE; if (fc & IEEE80211_FCTL_TODS) skb->pkt_type = PACKET_OTHERHOST; /* Process the wireless stats if needed */ orinoco_stat_gather(dev, skb, desc); /* Pass the packet to the networking stack */ netif_rx(skb); stats->rx_packets++; stats->rx_bytes += length; return; drop: dev_kfree_skb(skb); stats->rx_errors++; stats->rx_dropped++; } static void orinoco_rx_isr_tasklet(unsigned long data) { struct net_device *dev = (struct net_device *) data; struct orinoco_private *priv = netdev_priv(dev); struct orinoco_rx_data *rx_data, *temp; struct hermes_rx_descriptor *desc; struct sk_buff *skb; unsigned long flags; /* orinoco_rx requires the driver lock, and we also need to * protect priv->rx_list, so just hold the lock over the * lot. * * If orinoco_lock fails, we've unplugged the card. In this * case just abort. */ if (orinoco_lock(priv, &flags) != 0) return; /* extract desc and skb from queue */ list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { desc = rx_data->desc; skb = rx_data->skb; list_del(&rx_data->list); kfree(rx_data); orinoco_rx(dev, desc, skb); kfree(desc); } orinoco_unlock(priv, &flags); } /********************************************************************/ /* Rx path (info frames) */ /********************************************************************/ static void print_linkstatus(struct net_device *dev, u16 status) { char *s; if (suppress_linkstatus) return; switch (status) { case HERMES_LINKSTATUS_NOT_CONNECTED: s = "Not Connected"; break; case HERMES_LINKSTATUS_CONNECTED: s = "Connected"; break; case HERMES_LINKSTATUS_DISCONNECTED: s = "Disconnected"; break; case HERMES_LINKSTATUS_AP_CHANGE: s = "AP Changed"; break; case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: s = "AP Out of Range"; break; case HERMES_LINKSTATUS_AP_IN_RANGE: s = "AP In Range"; break; case HERMES_LINKSTATUS_ASSOC_FAILED: s = "Association Failed"; break; default: s = "UNKNOWN"; } printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", dev->name, s, status); } /* Search scan results for requested BSSID, join it if found */ static void orinoco_join_ap(struct work_struct *work) { struct orinoco_private *priv = container_of(work, struct orinoco_private, join_work); struct net_device *dev = priv->ndev; struct hermes *hw = &priv->hw; int err; unsigned long flags; struct join_req { u8 bssid[ETH_ALEN]; __le16 channel; } __attribute__ ((packed)) req; const int atom_len = offsetof(struct prism2_scan_apinfo, atim); struct prism2_scan_apinfo *atom = NULL; int offset = 4; int found = 0; u8 *buf; u16 len; /* Allocate buffer for scan results */ buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); if (!buf) return; if (orinoco_lock(priv, &flags) != 0) goto fail_lock; /* Sanity checks in case user changed something in the meantime */ if (!priv->bssid_fixed) goto out; if (strlen(priv->desired_essid) == 0) goto out; /* Read scan results from the firmware */ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SCANRESULTSTABLE, MAX_SCAN_LEN, &len, buf); if (err) { printk(KERN_ERR "%s: Cannot read scan results\n", dev->name); goto out; } len = HERMES_RECLEN_TO_BYTES(len); /* Go through the scan results looking for the channel of the AP * we were requested to join */ for (; offset + atom_len <= len; offset += atom_len) { atom = (struct prism2_scan_apinfo *) (buf + offset); if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { found = 1; break; } } if (!found) { DEBUG(1, "%s: Requested AP not found in scan results\n", dev->name); goto out; } memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); req.channel = atom->channel; /* both are little-endian */ err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, &req); if (err) printk(KERN_ERR "%s: Error issuing join request\n", dev->name); out: orinoco_unlock(priv, &flags); fail_lock: kfree(buf); } /* Send new BSSID to userspace */ static void orinoco_send_bssid_wevent(struct orinoco_private *priv) { struct net_device *dev = priv->ndev; struct hermes *hw = &priv->hw; union iwreq_data wrqu; int err; err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, ETH_ALEN, NULL, wrqu.ap_addr.sa_data); if (err != 0) return; wrqu.ap_addr.sa_family = ARPHRD_ETHER; /* Send event to user space */ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); } static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) { struct net_device *dev = priv->ndev; struct hermes *hw = &priv->hw; union iwreq_data wrqu; int err; u8 buf[88]; u8 *ie; if (!priv->has_wpa) return; err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, sizeof(buf), NULL, &buf); if (err != 0) return; ie = orinoco_get_wpa_ie(buf, sizeof(buf)); if (ie) { int rem = sizeof(buf) - (ie - &buf[0]); wrqu.data.length = ie[1] + 2; if (wrqu.data.length > rem) wrqu.data.length = rem; if (wrqu.data.length) /* Send event to user space */ wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); } } static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) { struct net_device *dev = priv->ndev; struct hermes *hw = &priv->hw; union iwreq_data wrqu; int err; u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ u8 *ie; if (!priv->has_wpa) return; err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO, sizeof(buf), NULL, &buf); if (err != 0) return; ie = orinoco_get_wpa_ie(buf, sizeof(buf)); if (ie) { int rem = sizeof(buf) - (ie - &buf[0]); wrqu.data.length = ie[1] + 2; if (wrqu.data.length > rem) wrqu.data.length = rem; if (wrqu.data.length) /* Send event to user space */ wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); } } static void orinoco_send_wevents(struct work_struct *work) { struct orinoco_private *priv = container_of(work, struct orinoco_private, wevent_work); unsigned long flags; if (orinoco_lock(priv, &flags) != 0) return; orinoco_send_assocreqie_wevent(priv); orinoco_send_assocrespie_wevent(priv); orinoco_send_bssid_wevent(priv); orinoco_unlock(priv, &flags); } static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); u16 infofid; struct { __le16 len; __le16 type; } __attribute__ ((packed)) info; int len, type; int err; /* This is an answer to an INQUIRE command that we did earlier, * or an information "event" generated by the card * The controller return to us a pseudo frame containing * the information in question - Jean II */ infofid = hermes_read_regn(hw, INFOFID); /* Read the info frame header - don't try too hard */ err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), infofid, 0); if (err) { printk(KERN_ERR "%s: error %d reading info frame. " "Frame dropped.\n", dev->name, err); return; } len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); type = le16_to_cpu(info.type); switch (type) { case HERMES_INQ_TALLIES: { struct hermes_tallies_frame tallies; struct iw_statistics *wstats = &priv->wstats; if (len > sizeof(tallies)) { printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", dev->name, len); len = sizeof(tallies); } err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, infofid, sizeof(info)); if (err) break; /* Increment our various counters */ /* wstats->discard.nwid - no wrong BSSID stuff */ wstats->discard.code += le16_to_cpu(tallies.RxWEPUndecryptable); if (len == sizeof(tallies)) wstats->discard.code += le16_to_cpu(tallies.RxDiscards_WEPICVError) + le16_to_cpu(tallies.RxDiscards_WEPExcluded); wstats->discard.misc += le16_to_cpu(tallies.TxDiscardsWrongSA); wstats->discard.fragment += le16_to_cpu(tallies.RxMsgInBadMsgFragments); wstats->discard.retries += le16_to_cpu(tallies.TxRetryLimitExceeded); /* wstats->miss.beacon - no match */ } break; case HERMES_INQ_LINKSTATUS: { struct hermes_linkstatus linkstatus; u16 newstatus; int connected; if (priv->iw_mode == IW_MODE_MONITOR) break; if (len != sizeof(linkstatus)) { printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", dev->name, len); break; } err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, infofid, sizeof(info)); if (err) break; newstatus = le16_to_cpu(linkstatus.linkstatus); /* Symbol firmware uses "out of range" to signal that * the hostscan frame can be requested. */ if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && priv->firmware_type == FIRMWARE_TYPE_SYMBOL && priv->has_hostscan && priv->scan_inprogress) { hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); break; } connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); if (connected) netif_carrier_on(dev); else if (!ignore_disconnect) netif_carrier_off(dev); if (newstatus != priv->last_linkstatus) { priv->last_linkstatus = newstatus; print_linkstatus(dev, newstatus); /* The info frame contains only one word which is the * status (see hermes.h). The status is pretty boring * in itself, that's why we export the new BSSID... * Jean II */ schedule_work(&priv->wevent_work); } } break; case HERMES_INQ_SCAN: if (!priv->scan_inprogress && priv->bssid_fixed && priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { schedule_work(&priv->join_work); break; } /* fall through */ case HERMES_INQ_HOSTSCAN: case HERMES_INQ_HOSTSCAN_SYMBOL: { /* Result of a scanning. Contains information about * cells in the vicinity - Jean II */ union iwreq_data wrqu; unsigned char *buf; /* Scan is no longer in progress */ priv->scan_inprogress = 0; /* Sanity check */ if (len > 4096) { printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", dev->name, len); break; } /* Allocate buffer for results */ buf = kmalloc(len, GFP_ATOMIC); if (buf == NULL) /* No memory, so can't printk()... */ break; /* Read scan data */ err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, infofid, sizeof(info)); if (err) { kfree(buf); break; } #ifdef ORINOCO_DEBUG { int i; printk(KERN_DEBUG "Scan result [%02X", buf[0]); for (i = 1; i < (len * 2); i++) printk(":%02X", buf[i]); printk("]\n"); } #endif /* ORINOCO_DEBUG */ if (orinoco_process_scan_results(priv, buf, len) == 0) { /* Send an empty event to user space. * We don't send the received data on the event because * it would require us to do complex transcoding, and * we want to minimise the work done in the irq handler * Use a request to extract the data - Jean II */ wrqu.data.length = 0; wrqu.data.flags = 0; wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); } kfree(buf); } break; case HERMES_INQ_CHANNELINFO: { struct agere_ext_scan_info *bss; if (!priv->scan_inprogress) { printk(KERN_DEBUG "%s: Got chaninfo without scan, " "len=%d\n", dev->name, len); break; } /* An empty result indicates that the scan is complete */ if (len == 0) { union iwreq_data wrqu; /* Scan is no longer in progress */ priv->scan_inprogress = 0; wrqu.data.length = 0; wrqu.data.flags = 0; wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); break; } /* Sanity check */ else if (len > sizeof(*bss)) { printk(KERN_WARNING "%s: Ext scan results too large (%d bytes). " "Truncating results to %zd bytes.\n", dev->name, len, sizeof(*bss)); len = sizeof(*bss); } else if (len < (offsetof(struct agere_ext_scan_info, data) + 2)) { /* Drop this result now so we don't have to * keep checking later */ printk(KERN_WARNING "%s: Ext scan results too short (%d bytes)\n", dev->name, len); break; } bss = kmalloc(sizeof(*bss), GFP_ATOMIC); if (bss == NULL) break; /* Read scan data */ err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len, infofid, sizeof(info)); if (err) { kfree(bss); break; } orinoco_add_ext_scan_result(priv, bss); kfree(bss); break; } case HERMES_INQ_SEC_STAT_AGERE: /* Security status (Agere specific) */ /* Ignore this frame for now */ if (priv->firmware_type == FIRMWARE_TYPE_AGERE) break; /* fall through */ default: printk(KERN_DEBUG "%s: Unknown information frame received: " "type 0x%04x, length %d\n", dev->name, type, len); /* We don't actually do anything about it */ break; } } static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) { if (net_ratelimit()) printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); } /********************************************************************/ /* Internal hardware control routines */ /********************************************************************/ int __orinoco_up(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct hermes *hw = &priv->hw; int err; netif_carrier_off(dev); /* just to make sure */ err = __orinoco_program_rids(dev); if (err) { printk(KERN_ERR "%s: Error %d configuring card\n", dev->name, err); return err; } /* Fire things up again */ hermes_set_irqmask(hw, ORINOCO_INTEN); err = hermes_enable_port(hw, 0); if (err) { printk(KERN_ERR "%s: Error %d enabling MAC port\n", dev->name, err); return err; } netif_start_queue(dev); return 0; } EXPORT_SYMBOL(__orinoco_up); int __orinoco_down(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct hermes *hw = &priv->hw; int err; netif_stop_queue(dev); if (!priv->hw_unavailable) { if (!priv->broken_disableport) { err = hermes_disable_port(hw, 0); if (err) { /* Some firmwares (e.g. Intersil 1.3.x) seem * to have problems disabling the port, oh * well, too bad. */ printk(KERN_WARNING "%s: Error %d disabling MAC port\n", dev->name, err); priv->broken_disableport = 1; } } hermes_set_irqmask(hw, 0); hermes_write_regn(hw, EVACK, 0xffff); } /* firmware will have to reassociate */ netif_carrier_off(dev); priv->last_linkstatus = 0xffff; return 0; } EXPORT_SYMBOL(__orinoco_down); int orinoco_reinit_firmware(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct hermes *hw = &priv->hw; int err; err = hermes_init(hw); if (priv->do_fw_download && !err) { err = orinoco_download(priv); if (err) priv->do_fw_download = 0; } if (!err) err = orinoco_hw_allocate_fid(priv); return err; } EXPORT_SYMBOL(orinoco_reinit_firmware); int __orinoco_program_rids(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; int err; struct hermes_idstring idbuf; /* Set the MAC address */ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); if (err) { printk(KERN_ERR "%s: Error %d setting MAC address\n", dev->name, err); return err; } /* Set up the link mode */ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, priv->port_type); if (err) { printk(KERN_ERR "%s: Error %d setting port type\n", dev->name, err); return err; } /* Set the channel/frequency */ if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL, priv->channel); if (err) { printk(KERN_ERR "%s: Error %d setting channel %d\n", dev->name, err, priv->channel); return err; } } if (priv->has_ibss) { u16 createibss; if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { printk(KERN_WARNING "%s: This firmware requires an " "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); /* With wvlan_cs, in this case, we would crash. * hopefully, this driver will behave better... * Jean II */ createibss = 0; } else { createibss = priv->createibss; } err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFCREATEIBSS, createibss); if (err) { printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", dev->name, err); return err; } } /* Set the desired BSSID */ err = __orinoco_hw_set_wap(priv); if (err) { printk(KERN_ERR "%s: Error %d setting AP address\n", dev->name, err); return err; } /* Set the desired ESSID */ idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), &idbuf); if (err) { printk(KERN_ERR "%s: Error %d setting OWNSSID\n", dev->name, err); return err; } err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), &idbuf); if (err) { printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", dev->name, err); return err; } /* Set the station name */ idbuf.len = cpu_to_le16(strlen(priv->nick)); memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), &idbuf); if (err) { printk(KERN_ERR "%s: Error %d setting nickname\n", dev->name, err); return err; } /* Set AP density */ if (priv->has_sensitivity) { err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, priv->ap_density); if (err) { printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " "Disabling sensitivity control\n", dev->name, err); priv->has_sensitivity = 0; } } /* Set RTS threshold */ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, priv->rts_thresh); if (err) { printk(KERN_ERR "%s: Error %d setting RTS threshold\n", dev->name, err); return err; } /* Set fragmentation threshold or MWO robustness */ if (priv->has_mwo) err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFMWOROBUST_AGERE, priv->mwo_robust); else err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, priv->frag_thresh); if (err) { printk(KERN_ERR "%s: Error %d setting fragmentation\n", dev->name, err); return err; } /* Set bitrate */ err = __orinoco_hw_set_bitrate(priv); if (err) { printk(KERN_ERR "%s: Error %d setting bitrate\n", dev->name, err); return err; } /* Set power management */ if (priv->has_pm) { err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, priv->pm_on); if (err) { printk(KERN_ERR "%s: Error %d setting up PM\n", dev->name, err); return err; } err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, priv->pm_mcast); if (err) { printk(KERN_ERR "%s: Error %d setting up PM\n", dev->name, err); return err; } err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFMAXSLEEPDURATION, priv->pm_period); if (err) { printk(KERN_ERR "%s: Error %d setting up PM\n", dev->name, err); return err; } err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, priv->pm_timeout); if (err) { printk(KERN_ERR "%s: Error %d setting up PM\n", dev->name, err); return err; } } /* Set preamble - only for Symbol so far... */ if (priv->has_preamble) { err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPREAMBLE_SYMBOL, priv->preamble); if (err) { printk(KERN_ERR "%s: Error %d setting preamble\n", dev->name, err); return err; } } /* Set up encryption */ if (priv->has_wep || priv->has_wpa) { err = __orinoco_hw_setup_enc(priv); if (err) { printk(KERN_ERR "%s: Error %d activating encryption\n", dev->name, err); return err; } } if (priv->iw_mode == IW_MODE_MONITOR) { /* Enable monitor mode */ dev->type = ARPHRD_IEEE80211; err = hermes_docmd_wait(hw, HERMES_CMD_TEST | HERMES_TEST_MONITOR, 0, NULL); } else { /* Disable monitor mode */ dev->type = ARPHRD_ETHER; err = hermes_docmd_wait(hw, HERMES_CMD_TEST | HERMES_TEST_STOP, 0, NULL); } if (err) return err; /* Set promiscuity / multicast*/ priv->promiscuous = 0; priv->mc_count = 0; /* FIXME: what about netif_tx_lock */ __orinoco_set_multicast_list(dev); return 0; } /* FIXME: return int? */ static void __orinoco_set_multicast_list(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); int err = 0; int promisc, mc_count; /* The Hermes doesn't seem to have an allmulti mode, so we go * into promiscuous mode and let the upper levels deal. */ if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || (dev->mc_count > MAX_MULTICAST(priv))) { promisc = 1; mc_count = 0; } else { promisc = 0; mc_count = dev->mc_count; } err = __orinoco_hw_set_multicast_list(priv, dev->mc_list, mc_count, promisc); } /* This must be called from user context, without locks held - use * schedule_work() */ void orinoco_reset(struct work_struct *work) { struct orinoco_private *priv = container_of(work, struct orinoco_private, reset_work); struct net_device *dev = priv->ndev; struct hermes *hw = &priv->hw; int err; unsigned long flags; if (orinoco_lock(priv, &flags) != 0) /* When the hardware becomes available again, whatever * detects that is responsible for re-initializing * it. So no need for anything further */ return; netif_stop_queue(dev); /* Shut off interrupts. Depending on what state the hardware * is in, this might not work, but we'll try anyway */ hermes_set_irqmask(hw, 0); hermes_write_regn(hw, EVACK, 0xffff); priv->hw_unavailable++; priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ netif_carrier_off(dev); orinoco_unlock(priv, &flags); /* Scanning support: Cleanup of driver struct */ orinoco_clear_scan_results(priv, 0); priv->scan_inprogress = 0; if (priv->hard_reset) { err = (*priv->hard_reset)(priv); if (err) { printk(KERN_ERR "%s: orinoco_reset: Error %d " "performing hard reset\n", dev->name, err); goto disable; } } err = orinoco_reinit_firmware(dev); if (err) { printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", dev->name, err); goto disable; } /* This has to be called from user context */ spin_lock_irq(&priv->lock); priv->hw_unavailable--; /* priv->open or priv->hw_unavailable might have changed while * we dropped the lock */ if (priv->open && (!priv->hw_unavailable)) { err = __orinoco_up(dev); if (err) { printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", dev->name, err); } else dev->trans_start = jiffies; } spin_unlock_irq(&priv->lock); return; disable: hermes_set_irqmask(hw, 0); netif_device_detach(dev); printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); } /********************************************************************/ /* Interrupt handler */ /********************************************************************/ static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) { printk(KERN_DEBUG "%s: TICK\n", dev->name); } static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) { /* This seems to happen a fair bit under load, but ignoring it seems to work fine...*/ printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", dev->name); } irqreturn_t orinoco_interrupt(int irq, void *dev_id) { struct net_device *dev = dev_id; struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; int count = MAX_IRQLOOPS_PER_IRQ; u16 evstat, events; /* These are used to detect a runaway interrupt situation. * * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, * we panic and shut down the hardware */ /* jiffies value the last time we were called */ static int last_irq_jiffy; /* = 0 */ static int loops_this_jiffy; /* = 0 */ unsigned long flags; if (orinoco_lock(priv, &flags) != 0) { /* If hw is unavailable - we don't know if the irq was * for us or not */ return IRQ_HANDLED; } evstat = hermes_read_regn(hw, EVSTAT); events = evstat & hw->inten; if (!events) { orinoco_unlock(priv, &flags); return IRQ_NONE; } if (jiffies != last_irq_jiffy) loops_this_jiffy = 0; last_irq_jiffy = jiffies; while (events && count--) { if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { printk(KERN_WARNING "%s: IRQ handler is looping too " "much! Resetting.\n", dev->name); /* Disable interrupts for now */ hermes_set_irqmask(hw, 0); schedule_work(&priv->reset_work); break; } /* Check the card hasn't been removed */ if (!hermes_present(hw)) { DEBUG(0, "orinoco_interrupt(): card removed\n"); break; } if (events & HERMES_EV_TICK) __orinoco_ev_tick(dev, hw); if (events & HERMES_EV_WTERR) __orinoco_ev_wterr(dev, hw); if (events & HERMES_EV_INFDROP) __orinoco_ev_infdrop(dev, hw); if (events & HERMES_EV_INFO) __orinoco_ev_info(dev, hw); if (events & HERMES_EV_RX) __orinoco_ev_rx(dev, hw); if (events & HERMES_EV_TXEXC) __orinoco_ev_txexc(dev, hw); if (events & HERMES_EV_TX) __orinoco_ev_tx(dev, hw); if (events & HERMES_EV_ALLOC) __orinoco_ev_alloc(dev, hw); hermes_write_regn(hw, EVACK, evstat); evstat = hermes_read_regn(hw, EVSTAT); events = evstat & hw->inten; }; orinoco_unlock(priv, &flags); return IRQ_HANDLED; } EXPORT_SYMBOL(orinoco_interrupt); /********************************************************************/ /* Power management */ /********************************************************************/ #if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT) static int orinoco_pm_notifier(struct notifier_block *notifier, unsigned long pm_event, void *unused) { struct orinoco_private *priv = container_of(notifier, struct orinoco_private, pm_notifier); /* All we need to do is cache the firmware before suspend, and * release it when we come out. * * Only need to do this if we're downloading firmware. */ if (!priv->do_fw_download) return NOTIFY_DONE; switch (pm_event) { case PM_HIBERNATION_PREPARE: case PM_SUSPEND_PREPARE: orinoco_cache_fw(priv, 0); break; case PM_POST_RESTORE: /* Restore from hibernation failed. We need to clean * up in exactly the same way, so fall through. */ case PM_POST_HIBERNATION: case PM_POST_SUSPEND: orinoco_uncache_fw(priv); break; case PM_RESTORE_PREPARE: default: break; } return NOTIFY_DONE; } static void orinoco_register_pm_notifier(struct orinoco_private *priv) { priv->pm_notifier.notifier_call = orinoco_pm_notifier; register_pm_notifier(&priv->pm_notifier); } static void orinoco_unregister_pm_notifier(struct orinoco_private *priv) { unregister_pm_notifier(&priv->pm_notifier); } #else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */ #define orinoco_register_pm_notifier(priv) do { } while(0) #define orinoco_unregister_pm_notifier(priv) do { } while(0) #endif /********************************************************************/ /* Initialization */ /********************************************************************/ static int orinoco_init(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; int err = 0; /* No need to lock, the hw_unavailable flag is already set in * alloc_orinocodev() */ priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN; /* Initialize the firmware */ err = hermes_init(hw); if (err != 0) { printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", dev->name, err); goto out; } err = determine_fw_capabilities(priv); if (err != 0) { printk(KERN_ERR "%s: Incompatible firmware, aborting\n", dev->name); goto out; } if (priv->do_fw_download) { #ifdef CONFIG_HERMES_CACHE_FW_ON_INIT orinoco_cache_fw(priv, 0); #endif err = orinoco_download(priv); if (err) priv->do_fw_download = 0; /* Check firmware version again */ err = determine_fw_capabilities(priv); if (err != 0) { printk(KERN_ERR "%s: Incompatible firmware, aborting\n", dev->name); goto out; } } if (priv->has_port3) printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); if (priv->has_ibss) printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", dev->name); if (priv->has_wep) { printk(KERN_DEBUG "%s: WEP supported, %s-bit key\n", dev->name, priv->has_big_wep ? "104" : "40"); } if (priv->has_wpa) { printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name); if (orinoco_mic_init(priv)) { printk(KERN_ERR "%s: Failed to setup MIC crypto " "algorithm. Disabling WPA support\n", dev->name); priv->has_wpa = 0; } } /* Now we have the firmware capabilities, allocate appropiate * sized scan buffers */ if (orinoco_bss_data_allocate(priv)) goto out; orinoco_bss_data_init(priv); err = orinoco_hw_read_card_settings(priv, dev->dev_addr); if (err) goto out; err = orinoco_hw_allocate_fid(priv); if (err) { printk(KERN_ERR "%s: failed to allocate NIC buffer!\n", dev->name); goto out; } /* Set up the default configuration */ priv->iw_mode = IW_MODE_INFRA; /* By default use IEEE/IBSS ad-hoc mode if we have it */ priv->prefer_port3 = priv->has_port3 && (!priv->has_ibss); set_port_type(priv); priv->channel = 0; /* use firmware default */ priv->promiscuous = 0; priv->encode_alg = IW_ENCODE_ALG_NONE; priv->tx_key = 0; priv->wpa_enabled = 0; priv->tkip_cm_active = 0; priv->key_mgmt = 0; priv->wpa_ie_len = 0; priv->wpa_ie = NULL; /* Make the hardware available, as long as it hasn't been * removed elsewhere (e.g. by PCMCIA hot unplug) */ spin_lock_irq(&priv->lock); priv->hw_unavailable--; spin_unlock_irq(&priv->lock); printk(KERN_DEBUG "%s: ready\n", dev->name); out: return err; } static const struct net_device_ops orinoco_netdev_ops = { .ndo_init = orinoco_init, .ndo_open = orinoco_open, .ndo_stop = orinoco_stop, .ndo_start_xmit = orinoco_xmit, .ndo_set_multicast_list = orinoco_set_multicast_list, .ndo_change_mtu = orinoco_change_mtu, .ndo_tx_timeout = orinoco_tx_timeout, .ndo_get_stats = orinoco_get_stats, }; struct net_device *alloc_orinocodev(int sizeof_card, struct device *device, int (*hard_reset)(struct orinoco_private *), int (*stop_fw)(struct orinoco_private *, int)) { struct net_device *dev; struct orinoco_private *priv; dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); if (!dev) return NULL; priv = netdev_priv(dev); priv->ndev = dev; if (sizeof_card) priv->card = (void *)((unsigned long)priv + sizeof(struct orinoco_private)); else priv->card = NULL; priv->dev = device; /* Setup / override net_device fields */ dev->netdev_ops = &orinoco_netdev_ops; dev->watchdog_timeo = HZ; /* 1 second timeout */ dev->ethtool_ops = &orinoco_ethtool_ops; dev->wireless_handlers = &orinoco_handler_def; #ifdef WIRELESS_SPY priv->wireless_data.spy_data = &priv->spy_data; dev->wireless_data = &priv->wireless_data; #endif /* we use the default eth_mac_addr for setting the MAC addr */ /* Reserve space in skb for the SNAP header */ dev->hard_header_len += ENCAPS_OVERHEAD; /* Set up default callbacks */ priv->hard_reset = hard_reset; priv->stop_fw = stop_fw; spin_lock_init(&priv->lock); priv->open = 0; priv->hw_unavailable = 1; /* orinoco_init() must clear this * before anything else touches the * hardware */ INIT_WORK(&priv->reset_work, orinoco_reset); INIT_WORK(&priv->join_work, orinoco_join_ap); INIT_WORK(&priv->wevent_work, orinoco_send_wevents); INIT_LIST_HEAD(&priv->rx_list); tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet, (unsigned long) dev); netif_carrier_off(dev); priv->last_linkstatus = 0xffff; #if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) priv->cached_pri_fw = NULL; priv->cached_fw = NULL; #endif /* Register PM notifiers */ orinoco_register_pm_notifier(priv); return dev; } EXPORT_SYMBOL(alloc_orinocodev); void free_orinocodev(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct orinoco_rx_data *rx_data, *temp; /* If the tasklet is scheduled when we call tasklet_kill it * will run one final time. However the tasklet will only * drain priv->rx_list if the hw is still available. */ tasklet_kill(&priv->rx_tasklet); /* Explicitly drain priv->rx_list */ list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { list_del(&rx_data->list); dev_kfree_skb(rx_data->skb); kfree(rx_data->desc); kfree(rx_data); } orinoco_unregister_pm_notifier(priv); orinoco_uncache_fw(priv); priv->wpa_ie_len = 0; kfree(priv->wpa_ie); orinoco_mic_free(priv); orinoco_bss_data_free(priv); free_netdev(dev); } EXPORT_SYMBOL(free_orinocodev); static void orinoco_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct orinoco_private *priv = netdev_priv(dev); strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); if (dev->dev.parent) strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info) - 1); else snprintf(info->bus_info, sizeof(info->bus_info) - 1, "PCMCIA %p", priv->hw.iobase); } static const struct ethtool_ops orinoco_ethtool_ops = { .get_drvinfo = orinoco_get_drvinfo, .get_link = ethtool_op_get_link, }; /********************************************************************/ /* Module initialization */ /********************************************************************/ /* Can't be declared "const" or the whole __initdata section will * become const */ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION " (David Gibson , " "Pavel Roskin , et al)"; static int __init init_orinoco(void) { printk(KERN_DEBUG "%s\n", version); return 0; } static void __exit exit_orinoco(void) { } module_init(init_orinoco); module_exit(exit_orinoco);