/* Copyright (C) 2004 - 2007 rt2x00 SourceForge Project This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Module: rt2x00lib Abstract: rt2x00 generic configuration routines. */ /* * Set enviroment defines for rt2x00.h */ #define DRV_NAME "rt2x00lib" #include #include #include "rt2x00.h" #include "rt2x00lib.h" /* * The MAC and BSSID addressess are simple array of bytes, * these arrays are little endian, so when sending the addressess * to the drivers, copy the it into a endian-signed variable. * * Note that all devices (except rt2500usb) have 32 bits * register word sizes. This means that whatever variable we * pass _must_ be a multiple of 32 bits. Otherwise the device * might not accept what we are sending to it. * This will also make it easier for the driver to write * the data to the device. * * Also note that when NULL is passed as address the * we will send 00:00:00:00:00 to the device to clear the address. * This will prevent the device being confused when it wants * to ACK frames or consideres itself associated. */ void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac) { __le32 reg[2]; memset(®, 0, sizeof(reg)); if (mac) memcpy(®, mac, ETH_ALEN); rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, ®[0]); } void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) { __le32 reg[2]; memset(®, 0, sizeof(reg)); if (bssid) memcpy(®, bssid, ETH_ALEN); rt2x00dev->ops->lib->config_bssid(rt2x00dev, ®[0]); } void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type) { int tsf_sync; switch (type) { case IEEE80211_IF_TYPE_IBSS: case IEEE80211_IF_TYPE_AP: tsf_sync = TSF_SYNC_BEACON; break; case IEEE80211_IF_TYPE_STA: tsf_sync = TSF_SYNC_INFRA; break; default: tsf_sync = TSF_SYNC_NONE; break; } rt2x00dev->ops->lib->config_type(rt2x00dev, type, tsf_sync); } void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, const int force_config) { struct rt2x00lib_conf libconf; struct ieee80211_hw_mode *mode; struct ieee80211_rate *rate; struct antenna_setup *default_ant = &rt2x00dev->default_ant; struct antenna_setup *active_ant = &rt2x00dev->link.active_ant; int flags = 0; int short_slot_time; /* * In some situations we want to force all configurations * to be reloaded (When resuming for instance). */ if (force_config) { flags = CONFIG_UPDATE_ALL; goto config; } /* * Check which configuration options have been * updated and should be send to the device. */ if (rt2x00dev->rx_status.phymode != conf->phymode) flags |= CONFIG_UPDATE_PHYMODE; if (rt2x00dev->rx_status.channel != conf->channel) flags |= CONFIG_UPDATE_CHANNEL; if (rt2x00dev->tx_power != conf->power_level) flags |= CONFIG_UPDATE_TXPOWER; /* * Determining changes in the antenna setups request several checks: * antenna_sel_{r,t}x = 0 * -> Does active_{r,t}x match default_{r,t}x * -> Is default_{r,t}x SW_DIVERSITY * antenna_sel_{r,t}x = 1/2 * -> Does active_{r,t}x match antenna_sel_{r,t}x * The reason for not updating the antenna while SW diversity * should be used is simple: Software diversity means that * we should switch between the antenna's based on the * quality. This means that the current antenna is good enough * to work with untill the link tuner decides that an antenna * switch should be performed. */ if (!conf->antenna_sel_rx && default_ant->rx != ANTENNA_SW_DIVERSITY && default_ant->rx != active_ant->rx) flags |= CONFIG_UPDATE_ANTENNA; else if (conf->antenna_sel_rx && conf->antenna_sel_rx != active_ant->rx) flags |= CONFIG_UPDATE_ANTENNA; if (!conf->antenna_sel_tx && default_ant->tx != ANTENNA_SW_DIVERSITY && default_ant->tx != active_ant->tx) flags |= CONFIG_UPDATE_ANTENNA; else if (conf->antenna_sel_tx && conf->antenna_sel_tx != active_ant->tx) flags |= CONFIG_UPDATE_ANTENNA; /* * The following configuration options are never * stored anywhere and will always be updated. */ flags |= CONFIG_UPDATE_SLOT_TIME; flags |= CONFIG_UPDATE_BEACON_INT; /* * We have determined what options should be updated, * now precalculate device configuration values depending * on what configuration options need to be updated. */ config: memset(&libconf, 0, sizeof(libconf)); if (flags & CONFIG_UPDATE_PHYMODE) { switch (conf->phymode) { case MODE_IEEE80211A: libconf.phymode = HWMODE_A; break; case MODE_IEEE80211B: libconf.phymode = HWMODE_B; break; case MODE_IEEE80211G: libconf.phymode = HWMODE_G; break; default: ERROR(rt2x00dev, "Attempt to configure unsupported mode (%d)" "Defaulting to 802.11b", conf->phymode); libconf.phymode = HWMODE_B; } mode = &rt2x00dev->hwmodes[libconf.phymode]; rate = &mode->rates[mode->num_rates - 1]; libconf.basic_rates = DEVICE_GET_RATE_FIELD(rate->val, RATEMASK) & DEV_BASIC_RATEMASK; } if (flags & CONFIG_UPDATE_CHANNEL) { memcpy(&libconf.rf, &rt2x00dev->spec.channels[conf->channel_val], sizeof(libconf.rf)); } if (flags & CONFIG_UPDATE_ANTENNA) { if (conf->antenna_sel_rx) libconf.ant.rx = conf->antenna_sel_rx; else if (default_ant->rx != ANTENNA_SW_DIVERSITY) libconf.ant.rx = default_ant->rx; else if (active_ant->rx == ANTENNA_SW_DIVERSITY) libconf.ant.rx = ANTENNA_B; if (conf->antenna_sel_tx) libconf.ant.tx = conf->antenna_sel_tx; else if (default_ant->tx != ANTENNA_SW_DIVERSITY) libconf.ant.tx = default_ant->tx; else if (active_ant->tx == ANTENNA_SW_DIVERSITY) libconf.ant.tx = ANTENNA_B; } if (flags & CONFIG_UPDATE_SLOT_TIME) { short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; libconf.slot_time = short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME; libconf.sifs = SIFS; libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS; libconf.difs = short_slot_time ? SHORT_DIFS : DIFS; libconf.eifs = EIFS; } libconf.conf = conf; /* * Start configuration. */ rt2x00dev->ops->lib->config(rt2x00dev, flags, &libconf); /* * Some configuration changes affect the link quality * which means we need to reset the link tuner. */ if (flags & (CONFIG_UPDATE_CHANNEL | CONFIG_UPDATE_ANTENNA)) rt2x00lib_reset_link_tuner(rt2x00dev); rt2x00dev->curr_hwmode = libconf.phymode; rt2x00dev->rx_status.phymode = conf->phymode; rt2x00dev->rx_status.freq = conf->freq; rt2x00dev->rx_status.channel = conf->channel; rt2x00dev->tx_power = conf->power_level; rt2x00dev->link.active_ant.rx = libconf.ant.rx; rt2x00dev->link.active_ant.tx = libconf.ant.tx; }