/* * Copyright (c) 2000-2001 Adaptec Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr> * sym driver. * * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_proc.c#29 $ */ #include "aic7xxx_osm.h" #include "aic7xxx_inline.h" #include "aic7xxx_93cx6.h" static void copy_mem_info(struct info_str *info, char *data, int len); static int copy_info(struct info_str *info, char *fmt, ...); static void ahc_dump_target_state(struct ahc_softc *ahc, struct info_str *info, u_int our_id, char channel, u_int target_id, u_int target_offset); static void ahc_dump_device_state(struct info_str *info, struct scsi_device *dev); static int ahc_proc_write_seeprom(struct ahc_softc *ahc, char *buffer, int length); /* * Table of syncrates that don't follow the "divisible by 4" * rule. This table will be expanded in future SCSI specs. */ static struct { u_int period_factor; u_int period; /* in 100ths of ns */ } scsi_syncrates[] = { { 0x08, 625 }, /* FAST-160 */ { 0x09, 1250 }, /* FAST-80 */ { 0x0a, 2500 }, /* FAST-40 40MHz */ { 0x0b, 3030 }, /* FAST-40 33MHz */ { 0x0c, 5000 } /* FAST-20 */ }; /* * Return the frequency in kHz corresponding to the given * sync period factor. */ static u_int ahc_calc_syncsrate(u_int period_factor) { int i; /* See if the period is in the "exception" table */ for (i = 0; i < ARRAY_SIZE(scsi_syncrates); i++) { if (period_factor == scsi_syncrates[i].period_factor) { /* Period in kHz */ return (100000000 / scsi_syncrates[i].period); } } /* * Wasn't in the table, so use the standard * 4 times conversion. */ return (10000000 / (period_factor * 4 * 10)); } static void copy_mem_info(struct info_str *info, char *data, int len) { if (info->pos + len > info->offset + info->length) len = info->offset + info->length - info->pos; if (info->pos + len < info->offset) { info->pos += len; return; } if (info->pos < info->offset) { off_t partial; partial = info->offset - info->pos; data += partial; info->pos += partial; len -= partial; } if (len > 0) { memcpy(info->buffer, data, len); info->pos += len; info->buffer += len; } } static int copy_info(struct info_str *info, char *fmt, ...) { va_list args; char buf[256]; int len; va_start(args, fmt); len = vsprintf(buf, fmt, args); va_end(args); copy_mem_info(info, buf, len); return (len); } void ahc_format_transinfo(struct info_str *info, struct ahc_transinfo *tinfo) { u_int speed; u_int freq; u_int mb; speed = 3300; freq = 0; if (tinfo->offset != 0) { freq = ahc_calc_syncsrate(tinfo->period); speed = freq; } speed *= (0x01 << tinfo->width); mb = speed / 1000; if (mb > 0) copy_info(info, "%d.%03dMB/s transfers", mb, speed % 1000); else copy_info(info, "%dKB/s transfers", speed); if (freq != 0) { copy_info(info, " (%d.%03dMHz%s, offset %d", freq / 1000, freq % 1000, (tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0 ? " DT" : "", tinfo->offset); } if (tinfo->width > 0) { if (freq != 0) { copy_info(info, ", "); } else { copy_info(info, " ("); } copy_info(info, "%dbit)", 8 * (0x01 << tinfo->width)); } else if (freq != 0) { copy_info(info, ")"); } copy_info(info, "\n"); } static void ahc_dump_target_state(struct ahc_softc *ahc, struct info_str *info, u_int our_id, char channel, u_int target_id, u_int target_offset) { struct scsi_target *starget; struct ahc_initiator_tinfo *tinfo; struct ahc_tmode_tstate *tstate; int lun; tinfo = ahc_fetch_transinfo(ahc, channel, our_id, target_id, &tstate); if ((ahc->features & AHC_TWIN) != 0) copy_info(info, "Channel %c ", channel); copy_info(info, "Target %d Negotiation Settings\n", target_id); copy_info(info, "\tUser: "); ahc_format_transinfo(info, &tinfo->user); starget = ahc->platform_data->starget[target_offset]; if (!starget) return; copy_info(info, "\tGoal: "); ahc_format_transinfo(info, &tinfo->goal); copy_info(info, "\tCurr: "); ahc_format_transinfo(info, &tinfo->curr); for (lun = 0; lun < AHC_NUM_LUNS; lun++) { struct scsi_device *sdev; sdev = scsi_device_lookup_by_target(starget, lun); if (sdev == NULL) continue; ahc_dump_device_state(info, sdev); } } static void ahc_dump_device_state(struct info_str *info, struct scsi_device *sdev) { struct ahc_linux_device *dev = scsi_transport_device_data(sdev); copy_info(info, "\tChannel %c Target %d Lun %d Settings\n", sdev->sdev_target->channel + 'A', sdev->sdev_target->id, sdev->lun); copy_info(info, "\t\tCommands Queued %ld\n", dev->commands_issued); copy_info(info, "\t\tCommands Active %d\n", dev->active); copy_info(info, "\t\tCommand Openings %d\n", dev->openings); copy_info(info, "\t\tMax Tagged Openings %d\n", dev->maxtags); copy_info(info, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen); } static int ahc_proc_write_seeprom(struct ahc_softc *ahc, char *buffer, int length) { struct seeprom_descriptor sd; int have_seeprom; u_long s; int paused; int written; /* Default to failure. */ written = -EINVAL; ahc_lock(ahc, &s); paused = ahc_is_paused(ahc); if (!paused) ahc_pause(ahc); if (length != sizeof(struct seeprom_config)) { printf("ahc_proc_write_seeprom: incorrect buffer size\n"); goto done; } have_seeprom = ahc_verify_cksum((struct seeprom_config*)buffer); if (have_seeprom == 0) { printf("ahc_proc_write_seeprom: cksum verification failed\n"); goto done; } sd.sd_ahc = ahc; #if AHC_PCI_CONFIG > 0 if ((ahc->chip & AHC_PCI) != 0) { sd.sd_control_offset = SEECTL; sd.sd_status_offset = SEECTL; sd.sd_dataout_offset = SEECTL; if (ahc->flags & AHC_LARGE_SEEPROM) sd.sd_chip = C56_66; else sd.sd_chip = C46; sd.sd_MS = SEEMS; sd.sd_RDY = SEERDY; sd.sd_CS = SEECS; sd.sd_CK = SEECK; sd.sd_DO = SEEDO; sd.sd_DI = SEEDI; have_seeprom = ahc_acquire_seeprom(ahc, &sd); } else #endif if ((ahc->chip & AHC_VL) != 0) { sd.sd_control_offset = SEECTL_2840; sd.sd_status_offset = STATUS_2840; sd.sd_dataout_offset = STATUS_2840; sd.sd_chip = C46; sd.sd_MS = 0; sd.sd_RDY = EEPROM_TF; sd.sd_CS = CS_2840; sd.sd_CK = CK_2840; sd.sd_DO = DO_2840; sd.sd_DI = DI_2840; have_seeprom = TRUE; } else { printf("ahc_proc_write_seeprom: unsupported adapter type\n"); goto done; } if (!have_seeprom) { printf("ahc_proc_write_seeprom: No Serial EEPROM\n"); goto done; } else { u_int start_addr; if (ahc->seep_config == NULL) { ahc->seep_config = malloc(sizeof(*ahc->seep_config), M_DEVBUF, M_NOWAIT); if (ahc->seep_config == NULL) { printf("aic7xxx: Unable to allocate serial " "eeprom buffer. Write failing\n"); goto done; } } printf("aic7xxx: Writing Serial EEPROM\n"); start_addr = 32 * (ahc->channel - 'A'); ahc_write_seeprom(&sd, (u_int16_t *)buffer, start_addr, sizeof(struct seeprom_config)/2); ahc_read_seeprom(&sd, (uint16_t *)ahc->seep_config, start_addr, sizeof(struct seeprom_config)/2); #if AHC_PCI_CONFIG > 0 if ((ahc->chip & AHC_VL) == 0) ahc_release_seeprom(&sd); #endif written = length; } done: if (!paused) ahc_unpause(ahc); ahc_unlock(ahc, &s); return (written); } /* * Return information to handle /proc support for the driver. */ int ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, int inout) { struct ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata; struct info_str info; char ahc_info[256]; u_int max_targ; u_int i; int retval; /* Has data been written to the file? */ if (inout == TRUE) { retval = ahc_proc_write_seeprom(ahc, buffer, length); goto done; } if (start) *start = buffer; info.buffer = buffer; info.length = length; info.offset = offset; info.pos = 0; copy_info(&info, "Adaptec AIC7xxx driver version: %s\n", AIC7XXX_DRIVER_VERSION); copy_info(&info, "%s\n", ahc->description); ahc_controller_info(ahc, ahc_info); copy_info(&info, "%s\n", ahc_info); copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n", ahc->scb_data->numscbs, AHC_NSEG); if (ahc->seep_config == NULL) copy_info(&info, "No Serial EEPROM\n"); else { copy_info(&info, "Serial EEPROM:\n"); for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) { if (((i % 8) == 0) && (i != 0)) { copy_info(&info, "\n"); } copy_info(&info, "0x%.4x ", ((uint16_t*)ahc->seep_config)[i]); } copy_info(&info, "\n"); } copy_info(&info, "\n"); max_targ = 16; if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0) max_targ = 8; for (i = 0; i < max_targ; i++) { u_int our_id; u_int target_id; char channel; channel = 'A'; our_id = ahc->our_id; target_id = i; if (i > 7 && (ahc->features & AHC_TWIN) != 0) { channel = 'B'; our_id = ahc->our_id_b; target_id = i % 8; } ahc_dump_target_state(ahc, &info, our_id, channel, target_id, i); } retval = info.pos > info.offset ? info.pos - info.offset : 0; done: return (retval); }