/* * Copyright(c) 2007 Intel Corporation. All rights reserved. * Copyright(c) 2008 Red Hat, Inc. All rights reserved. * Copyright(c) 2008 Mike Christie * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * * Maintained at www.Open-FCoE.org */ /* * Fibre Channel exchange and sequence handling. */ #include #include #include #include #include #include /* * fc_exch_debug can be set in debugger or at compile time to get more logs. */ static int fc_exch_debug; #define FC_DEBUG_EXCH(fmt...) \ do { \ if (fc_exch_debug) \ FC_DBG(fmt); \ } while (0) static struct kmem_cache *fc_em_cachep; /* cache for exchanges */ /* * Structure and function definitions for managing Fibre Channel Exchanges * and Sequences. * * The three primary structures used here are fc_exch_mgr, fc_exch, and fc_seq. * * fc_exch_mgr holds the exchange state for an N port * * fc_exch holds state for one exchange and links to its active sequence. * * fc_seq holds the state for an individual sequence. */ /* * Exchange manager. * * This structure is the center for creating exchanges and sequences. * It manages the allocation of exchange IDs. */ struct fc_exch_mgr { enum fc_class class; /* default class for sequences */ spinlock_t em_lock; /* exchange manager lock, must be taken before ex_lock */ u16 last_xid; /* last allocated exchange ID */ u16 min_xid; /* min exchange ID */ u16 max_xid; /* max exchange ID */ u16 max_read; /* max exchange ID for read */ u16 last_read; /* last xid allocated for read */ u32 total_exches; /* total allocated exchanges */ struct list_head ex_list; /* allocated exchanges list */ struct fc_lport *lp; /* fc device instance */ mempool_t *ep_pool; /* reserve ep's */ /* * currently exchange mgr stats are updated but not used. * either stats can be expose via sysfs or remove them * all together if not used XXX */ struct { atomic_t no_free_exch; atomic_t no_free_exch_xid; atomic_t xid_not_found; atomic_t xid_busy; atomic_t seq_not_found; atomic_t non_bls_resp; } stats; struct fc_exch **exches; /* for exch pointers indexed by xid */ }; #define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq) static void fc_exch_rrq(struct fc_exch *); static void fc_seq_ls_acc(struct fc_seq *); static void fc_seq_ls_rjt(struct fc_seq *, enum fc_els_rjt_reason, enum fc_els_rjt_explan); static void fc_exch_els_rec(struct fc_seq *, struct fc_frame *); static void fc_exch_els_rrq(struct fc_seq *, struct fc_frame *); static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp); /* * Internal implementation notes. * * The exchange manager is one by default in libfc but LLD may choose * to have one per CPU. The sequence manager is one per exchange manager * and currently never separated. * * Section 9.8 in FC-FS-2 specifies: "The SEQ_ID is a one-byte field * assigned by the Sequence Initiator that shall be unique for a specific * D_ID and S_ID pair while the Sequence is open." Note that it isn't * qualified by exchange ID, which one might think it would be. * In practice this limits the number of open sequences and exchanges to 256 * per session. For most targets we could treat this limit as per exchange. * * The exchange and its sequence are freed when the last sequence is received. * It's possible for the remote port to leave an exchange open without * sending any sequences. * * Notes on reference counts: * * Exchanges are reference counted and exchange gets freed when the reference * count becomes zero. * * Timeouts: * Sequences are timed out for E_D_TOV and R_A_TOV. * * Sequence event handling: * * The following events may occur on initiator sequences: * * Send. * For now, the whole thing is sent. * Receive ACK * This applies only to class F. * The sequence is marked complete. * ULP completion. * The upper layer calls fc_exch_done() when done * with exchange and sequence tuple. * RX-inferred completion. * When we receive the next sequence on the same exchange, we can * retire the previous sequence ID. (XXX not implemented). * Timeout. * R_A_TOV frees the sequence ID. If we're waiting for ACK, * E_D_TOV causes abort and calls upper layer response handler * with FC_EX_TIMEOUT error. * Receive RJT * XXX defer. * Send ABTS * On timeout. * * The following events may occur on recipient sequences: * * Receive * Allocate sequence for first frame received. * Hold during receive handler. * Release when final frame received. * Keep status of last N of these for the ELS RES command. XXX TBD. * Receive ABTS * Deallocate sequence * Send RJT * Deallocate * * For now, we neglect conditions where only part of a sequence was * received or transmitted, or where out-of-order receipt is detected. */ /* * Locking notes: * * The EM code run in a per-CPU worker thread. * * To protect against concurrency between a worker thread code and timers, * sequence allocation and deallocation must be locked. * - exchange refcnt can be done atomicly without locks. * - sequence allocation must be locked by exch lock. * - If the em_lock and ex_lock must be taken at the same time, then the * em_lock must be taken before the ex_lock. */ /* * opcode names for debugging. */ static char *fc_exch_rctl_names[] = FC_RCTL_NAMES_INIT; #define FC_TABLE_SIZE(x) (sizeof(x) / sizeof(x[0])) static inline const char *fc_exch_name_lookup(unsigned int op, char **table, unsigned int max_index) { const char *name = NULL; if (op < max_index) name = table[op]; if (!name) name = "unknown"; return name; } static const char *fc_exch_rctl_name(unsigned int op) { return fc_exch_name_lookup(op, fc_exch_rctl_names, FC_TABLE_SIZE(fc_exch_rctl_names)); } /* * Hold an exchange - keep it from being freed. */ static void fc_exch_hold(struct fc_exch *ep) { atomic_inc(&ep->ex_refcnt); } /* * setup fc hdr by initializing few more FC header fields and sof/eof. * Initialized fields by this func: * - fh_ox_id, fh_rx_id, fh_seq_id, fh_seq_cnt * - sof and eof */ static void fc_exch_setup_hdr(struct fc_exch *ep, struct fc_frame *fp, u32 f_ctl) { struct fc_frame_header *fh = fc_frame_header_get(fp); u16 fill; fr_sof(fp) = ep->class; if (ep->seq.cnt) fr_sof(fp) = fc_sof_normal(ep->class); if (f_ctl & FC_FC_END_SEQ) { fr_eof(fp) = FC_EOF_T; if (fc_sof_needs_ack(ep->class)) fr_eof(fp) = FC_EOF_N; /* * Form f_ctl. * The number of fill bytes to make the length a 4-byte * multiple is the low order 2-bits of the f_ctl. * The fill itself will have been cleared by the frame * allocation. * After this, the length will be even, as expected by * the transport. */ fill = fr_len(fp) & 3; if (fill) { fill = 4 - fill; /* TODO, this may be a problem with fragmented skb */ skb_put(fp_skb(fp), fill); hton24(fh->fh_f_ctl, f_ctl | fill); } } else { WARN_ON(fr_len(fp) % 4 != 0); /* no pad to non last frame */ fr_eof(fp) = FC_EOF_N; } /* * Initialize remainig fh fields * from fc_fill_fc_hdr */ fh->fh_ox_id = htons(ep->oxid); fh->fh_rx_id = htons(ep->rxid); fh->fh_seq_id = ep->seq.id; fh->fh_seq_cnt = htons(ep->seq.cnt); } /* * Release a reference to an exchange. * If the refcnt goes to zero and the exchange is complete, it is freed. */ static void fc_exch_release(struct fc_exch *ep) { struct fc_exch_mgr *mp; if (atomic_dec_and_test(&ep->ex_refcnt)) { mp = ep->em; if (ep->destructor) ep->destructor(&ep->seq, ep->arg); if (ep->lp->tt.exch_put) ep->lp->tt.exch_put(ep->lp, mp, ep->xid); WARN_ON(!(ep->esb_stat & ESB_ST_COMPLETE)); mempool_free(ep, mp->ep_pool); } } static int fc_exch_done_locked(struct fc_exch *ep) { int rc = 1; /* * We must check for completion in case there are two threads * tyring to complete this. But the rrq code will reuse the * ep, and in that case we only clear the resp and set it as * complete, so it can be reused by the timer to send the rrq. */ ep->resp = NULL; if (ep->state & FC_EX_DONE) return rc; ep->esb_stat |= ESB_ST_COMPLETE; if (!(ep->esb_stat & ESB_ST_REC_QUAL)) { ep->state |= FC_EX_DONE; if (cancel_delayed_work(&ep->timeout_work)) atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ rc = 0; } return rc; } static void fc_exch_mgr_delete_ep(struct fc_exch *ep) { struct fc_exch_mgr *mp; mp = ep->em; spin_lock_bh(&mp->em_lock); WARN_ON(mp->total_exches <= 0); mp->total_exches--; mp->exches[ep->xid - mp->min_xid] = NULL; list_del(&ep->ex_list); spin_unlock_bh(&mp->em_lock); fc_exch_release(ep); /* drop hold for exch in mp */ } /* * Internal version of fc_exch_timer_set - used with lock held. */ static inline void fc_exch_timer_set_locked(struct fc_exch *ep, unsigned int timer_msec) { if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) return; FC_DEBUG_EXCH("Exchange (%4x) timed out, notifying the upper layer\n", ep->xid); if (schedule_delayed_work(&ep->timeout_work, msecs_to_jiffies(timer_msec))) fc_exch_hold(ep); /* hold for timer */ } /* * Set timer for an exchange. * The time is a minimum delay in milliseconds until the timer fires. * Used for upper level protocols to time out the exchange. * The timer is cancelled when it fires or when the exchange completes. * Returns non-zero if a timer couldn't be allocated. */ static void fc_exch_timer_set(struct fc_exch *ep, unsigned int timer_msec) { spin_lock_bh(&ep->ex_lock); fc_exch_timer_set_locked(ep, timer_msec); spin_unlock_bh(&ep->ex_lock); } int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec) { struct fc_seq *sp; struct fc_exch *ep; struct fc_frame *fp; int error; ep = fc_seq_exch(req_sp); spin_lock_bh(&ep->ex_lock); if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) || ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) { spin_unlock_bh(&ep->ex_lock); return -ENXIO; } /* * Send the abort on a new sequence if possible. */ sp = fc_seq_start_next_locked(&ep->seq); if (!sp) { spin_unlock_bh(&ep->ex_lock); return -ENOMEM; } ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL; if (timer_msec) fc_exch_timer_set_locked(ep, timer_msec); spin_unlock_bh(&ep->ex_lock); /* * If not logged into the fabric, don't send ABTS but leave * sequence active until next timeout. */ if (!ep->sid) return 0; /* * Send an abort for the sequence that timed out. */ fp = fc_frame_alloc(ep->lp, 0); if (fp) { fc_fill_fc_hdr(fp, FC_RCTL_BA_ABTS, ep->did, ep->sid, FC_TYPE_BLS, FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); error = fc_seq_send(ep->lp, sp, fp); } else error = -ENOBUFS; return error; } EXPORT_SYMBOL(fc_seq_exch_abort); /* * Exchange timeout - handle exchange timer expiration. * The timer will have been cancelled before this is called. */ static void fc_exch_timeout(struct work_struct *work) { struct fc_exch *ep = container_of(work, struct fc_exch, timeout_work.work); struct fc_seq *sp = &ep->seq; void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); void *arg; u32 e_stat; int rc = 1; spin_lock_bh(&ep->ex_lock); if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) goto unlock; e_stat = ep->esb_stat; if (e_stat & ESB_ST_COMPLETE) { ep->esb_stat = e_stat & ~ESB_ST_REC_QUAL; if (e_stat & ESB_ST_REC_QUAL) fc_exch_rrq(ep); spin_unlock_bh(&ep->ex_lock); goto done; } else { resp = ep->resp; arg = ep->arg; ep->resp = NULL; if (e_stat & ESB_ST_ABNORMAL) rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) fc_exch_mgr_delete_ep(ep); if (resp) resp(sp, ERR_PTR(-FC_EX_TIMEOUT), arg); fc_seq_exch_abort(sp, 2 * ep->r_a_tov); goto done; } unlock: spin_unlock_bh(&ep->ex_lock); done: /* * This release matches the hold taken when the timer was set. */ fc_exch_release(ep); } /* * Allocate a sequence. * * We don't support multiple originated sequences on the same exchange. * By implication, any previously originated sequence on this exchange * is complete, and we reallocate the same sequence. */ static struct fc_seq *fc_seq_alloc(struct fc_exch *ep, u8 seq_id) { struct fc_seq *sp; sp = &ep->seq; sp->ssb_stat = 0; sp->cnt = 0; sp->id = seq_id; return sp; } /* * fc_em_alloc_xid - returns an xid based on request type * @lp : ptr to associated lport * @fp : ptr to the assocated frame * * check the associated fc_fsp_pkt to get scsi command type and * command direction to decide from which range this exch id * will be allocated from. * * Returns : 0 or an valid xid */ static u16 fc_em_alloc_xid(struct fc_exch_mgr *mp, const struct fc_frame *fp) { u16 xid, min, max; u16 *plast; struct fc_exch *ep = NULL; if (mp->max_read) { if (fc_frame_is_read(fp)) { min = mp->min_xid; max = mp->max_read; plast = &mp->last_read; } else { min = mp->max_read + 1; max = mp->max_xid; plast = &mp->last_xid; } } else { min = mp->min_xid; max = mp->max_xid; plast = &mp->last_xid; } xid = *plast; do { xid = (xid == max) ? min : xid + 1; ep = mp->exches[xid - mp->min_xid]; } while ((ep != NULL) && (xid != *plast)); if (unlikely(ep)) xid = 0; else *plast = xid; return xid; } /* * fc_exch_alloc - allocate an exchange. * @mp : ptr to the exchange manager * @xid: input xid * * if xid is supplied zero then assign next free exchange ID * from exchange manager, otherwise use supplied xid. * Returns with exch lock held. */ struct fc_exch *fc_exch_alloc(struct fc_exch_mgr *mp, struct fc_frame *fp, u16 xid) { struct fc_exch *ep; /* allocate memory for exchange */ ep = mempool_alloc(mp->ep_pool, GFP_ATOMIC); if (!ep) { atomic_inc(&mp->stats.no_free_exch); goto out; } memset(ep, 0, sizeof(*ep)); spin_lock_bh(&mp->em_lock); /* alloc xid if input xid 0 */ if (!xid) { /* alloc a new xid */ xid = fc_em_alloc_xid(mp, fp); if (!xid) { printk(KERN_ERR "fc_em_alloc_xid() failed\n"); goto err; } } fc_exch_hold(ep); /* hold for exch in mp */ spin_lock_init(&ep->ex_lock); /* * Hold exch lock for caller to prevent fc_exch_reset() * from releasing exch while fc_exch_alloc() caller is * still working on exch. */ spin_lock_bh(&ep->ex_lock); mp->exches[xid - mp->min_xid] = ep; list_add_tail(&ep->ex_list, &mp->ex_list); fc_seq_alloc(ep, ep->seq_id++); mp->total_exches++; spin_unlock_bh(&mp->em_lock); /* * update exchange */ ep->oxid = ep->xid = xid; ep->em = mp; ep->lp = mp->lp; ep->f_ctl = FC_FC_FIRST_SEQ; /* next seq is first seq */ ep->rxid = FC_XID_UNKNOWN; ep->class = mp->class; INIT_DELAYED_WORK(&ep->timeout_work, fc_exch_timeout); out: return ep; err: spin_unlock_bh(&mp->em_lock); atomic_inc(&mp->stats.no_free_exch_xid); mempool_free(ep, mp->ep_pool); return NULL; } EXPORT_SYMBOL(fc_exch_alloc); /* * Lookup and hold an exchange. */ static struct fc_exch *fc_exch_find(struct fc_exch_mgr *mp, u16 xid) { struct fc_exch *ep = NULL; if ((xid >= mp->min_xid) && (xid <= mp->max_xid)) { spin_lock_bh(&mp->em_lock); ep = mp->exches[xid - mp->min_xid]; if (ep) { fc_exch_hold(ep); WARN_ON(ep->xid != xid); } spin_unlock_bh(&mp->em_lock); } return ep; } void fc_exch_done(struct fc_seq *sp) { struct fc_exch *ep = fc_seq_exch(sp); int rc; spin_lock_bh(&ep->ex_lock); rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) fc_exch_mgr_delete_ep(ep); } EXPORT_SYMBOL(fc_exch_done); /* * Allocate a new exchange as responder. * Sets the responder ID in the frame header. */ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_exch *ep; struct fc_frame_header *fh; ep = mp->lp->tt.exch_get(mp->lp, fp); if (ep) { ep->class = fc_frame_class(fp); /* * Set EX_CTX indicating we're responding on this exchange. */ ep->f_ctl |= FC_FC_EX_CTX; /* we're responding */ ep->f_ctl &= ~FC_FC_FIRST_SEQ; /* not new */ fh = fc_frame_header_get(fp); ep->sid = ntoh24(fh->fh_d_id); ep->did = ntoh24(fh->fh_s_id); ep->oid = ep->did; /* * Allocated exchange has placed the XID in the * originator field. Move it to the responder field, * and set the originator XID from the frame. */ ep->rxid = ep->xid; ep->oxid = ntohs(fh->fh_ox_id); ep->esb_stat |= ESB_ST_RESP | ESB_ST_SEQ_INIT; if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0) ep->esb_stat &= ~ESB_ST_SEQ_INIT; fc_exch_hold(ep); /* hold for caller */ spin_unlock_bh(&ep->ex_lock); /* lock from exch_get */ } return ep; } /* * Find a sequence for receive where the other end is originating the sequence. * If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold * on the ep that should be released by the caller. */ static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); struct fc_exch *ep = NULL; struct fc_seq *sp = NULL; enum fc_pf_rjt_reason reject = FC_RJT_NONE; u32 f_ctl; u16 xid; f_ctl = ntoh24(fh->fh_f_ctl); WARN_ON((f_ctl & FC_FC_SEQ_CTX) != 0); /* * Lookup or create the exchange if we will be creating the sequence. */ if (f_ctl & FC_FC_EX_CTX) { xid = ntohs(fh->fh_ox_id); /* we originated exch */ ep = fc_exch_find(mp, xid); if (!ep) { atomic_inc(&mp->stats.xid_not_found); reject = FC_RJT_OX_ID; goto out; } if (ep->rxid == FC_XID_UNKNOWN) ep->rxid = ntohs(fh->fh_rx_id); else if (ep->rxid != ntohs(fh->fh_rx_id)) { reject = FC_RJT_OX_ID; goto rel; } } else { xid = ntohs(fh->fh_rx_id); /* we are the responder */ /* * Special case for MDS issuing an ELS TEST with a * bad rxid of 0. * XXX take this out once we do the proper reject. */ if (xid == 0 && fh->fh_r_ctl == FC_RCTL_ELS_REQ && fc_frame_payload_op(fp) == ELS_TEST) { fh->fh_rx_id = htons(FC_XID_UNKNOWN); xid = FC_XID_UNKNOWN; } /* * new sequence - find the exchange */ ep = fc_exch_find(mp, xid); if ((f_ctl & FC_FC_FIRST_SEQ) && fc_sof_is_init(fr_sof(fp))) { if (ep) { atomic_inc(&mp->stats.xid_busy); reject = FC_RJT_RX_ID; goto rel; } ep = fc_exch_resp(mp, fp); if (!ep) { reject = FC_RJT_EXCH_EST; /* XXX */ goto out; } xid = ep->xid; /* get our XID */ } else if (!ep) { atomic_inc(&mp->stats.xid_not_found); reject = FC_RJT_RX_ID; /* XID not found */ goto out; } } /* * At this point, we have the exchange held. * Find or create the sequence. */ if (fc_sof_is_init(fr_sof(fp))) { sp = fc_seq_start_next(&ep->seq); if (!sp) { reject = FC_RJT_SEQ_XS; /* exchange shortage */ goto rel; } sp->id = fh->fh_seq_id; sp->ssb_stat |= SSB_ST_RESP; } else { sp = &ep->seq; if (sp->id != fh->fh_seq_id) { atomic_inc(&mp->stats.seq_not_found); reject = FC_RJT_SEQ_ID; /* sequence/exch should exist */ goto rel; } } WARN_ON(ep != fc_seq_exch(sp)); if (f_ctl & FC_FC_SEQ_INIT) ep->esb_stat |= ESB_ST_SEQ_INIT; fr_seq(fp) = sp; out: return reject; rel: fc_exch_done(&ep->seq); fc_exch_release(ep); /* hold from fc_exch_find/fc_exch_resp */ return reject; } /* * Find the sequence for a frame being received. * We originated the sequence, so it should be found. * We may or may not have originated the exchange. * Does not hold the sequence for the caller. */ static struct fc_seq *fc_seq_lookup_orig(struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); struct fc_exch *ep; struct fc_seq *sp = NULL; u32 f_ctl; u16 xid; f_ctl = ntoh24(fh->fh_f_ctl); WARN_ON((f_ctl & FC_FC_SEQ_CTX) != FC_FC_SEQ_CTX); xid = ntohs((f_ctl & FC_FC_EX_CTX) ? fh->fh_ox_id : fh->fh_rx_id); ep = fc_exch_find(mp, xid); if (!ep) return NULL; if (ep->seq.id == fh->fh_seq_id) { /* * Save the RX_ID if we didn't previously know it. */ sp = &ep->seq; if ((f_ctl & FC_FC_EX_CTX) != 0 && ep->rxid == FC_XID_UNKNOWN) { ep->rxid = ntohs(fh->fh_rx_id); } } fc_exch_release(ep); return sp; } /* * Set addresses for an exchange. * Note this must be done before the first sequence of the exchange is sent. */ static void fc_exch_set_addr(struct fc_exch *ep, u32 orig_id, u32 resp_id) { ep->oid = orig_id; if (ep->esb_stat & ESB_ST_RESP) { ep->sid = resp_id; ep->did = orig_id; } else { ep->sid = orig_id; ep->did = resp_id; } } static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp) { struct fc_exch *ep = fc_seq_exch(sp); sp = fc_seq_alloc(ep, ep->seq_id++); FC_DEBUG_EXCH("exch %4x f_ctl %6x seq %2x\n", ep->xid, ep->f_ctl, sp->id); return sp; } /* * Allocate a new sequence on the same exchange as the supplied sequence. * This will never return NULL. */ struct fc_seq *fc_seq_start_next(struct fc_seq *sp) { struct fc_exch *ep = fc_seq_exch(sp); spin_lock_bh(&ep->ex_lock); WARN_ON((ep->esb_stat & ESB_ST_COMPLETE) != 0); sp = fc_seq_start_next_locked(sp); spin_unlock_bh(&ep->ex_lock); return sp; } EXPORT_SYMBOL(fc_seq_start_next); int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp) { struct fc_exch *ep; struct fc_frame_header *fh = fc_frame_header_get(fp); int error; u32 f_ctl; ep = fc_seq_exch(sp); WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT); f_ctl = ntoh24(fh->fh_f_ctl); fc_exch_setup_hdr(ep, fp, f_ctl); /* * update sequence count if this frame is carrying * multiple FC frames when sequence offload is enabled * by LLD. */ if (fr_max_payload(fp)) sp->cnt += DIV_ROUND_UP((fr_len(fp) - sizeof(*fh)), fr_max_payload(fp)); else sp->cnt++; /* * Send the frame. */ error = lp->tt.frame_send(lp, fp); /* * Update the exchange and sequence flags, * assuming all frames for the sequence have been sent. * We can only be called to send once for each sequence. */ spin_lock_bh(&ep->ex_lock); ep->f_ctl = f_ctl & ~FC_FC_FIRST_SEQ; /* not first seq */ if (f_ctl & (FC_FC_END_SEQ | FC_FC_SEQ_INIT)) ep->esb_stat &= ~ESB_ST_SEQ_INIT; spin_unlock_bh(&ep->ex_lock); return error; } EXPORT_SYMBOL(fc_seq_send); void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd, struct fc_seq_els_data *els_data) { switch (els_cmd) { case ELS_LS_RJT: fc_seq_ls_rjt(sp, els_data->reason, els_data->explan); break; case ELS_LS_ACC: fc_seq_ls_acc(sp); break; case ELS_RRQ: fc_exch_els_rrq(sp, els_data->fp); break; case ELS_REC: fc_exch_els_rec(sp, els_data->fp); break; default: FC_DBG("Invalid ELS CMD:%x\n", els_cmd); } } EXPORT_SYMBOL(fc_seq_els_rsp_send); /* * Send a sequence, which is also the last sequence in the exchange. */ static void fc_seq_send_last(struct fc_seq *sp, struct fc_frame *fp, enum fc_rctl rctl, enum fc_fh_type fh_type) { u32 f_ctl; struct fc_exch *ep = fc_seq_exch(sp); f_ctl = FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT; f_ctl |= ep->f_ctl; fc_fill_fc_hdr(fp, rctl, ep->did, ep->sid, fh_type, f_ctl, 0); fc_seq_send(ep->lp, sp, fp); } /* * Send ACK_1 (or equiv.) indicating we received something. * The frame we're acking is supplied. */ static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp) { struct fc_frame *fp; struct fc_frame_header *rx_fh; struct fc_frame_header *fh; struct fc_exch *ep = fc_seq_exch(sp); struct fc_lport *lp = ep->lp; unsigned int f_ctl; /* * Don't send ACKs for class 3. */ if (fc_sof_needs_ack(fr_sof(rx_fp))) { fp = fc_frame_alloc(lp, 0); if (!fp) return; fh = fc_frame_header_get(fp); fh->fh_r_ctl = FC_RCTL_ACK_1; fh->fh_type = FC_TYPE_BLS; /* * Form f_ctl by inverting EX_CTX and SEQ_CTX (bits 23, 22). * Echo FIRST_SEQ, LAST_SEQ, END_SEQ, END_CONN, SEQ_INIT. * Bits 9-8 are meaningful (retransmitted or unidirectional). * Last ACK uses bits 7-6 (continue sequence), * bits 5-4 are meaningful (what kind of ACK to use). */ rx_fh = fc_frame_header_get(rx_fp); f_ctl = ntoh24(rx_fh->fh_f_ctl); f_ctl &= FC_FC_EX_CTX | FC_FC_SEQ_CTX | FC_FC_FIRST_SEQ | FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_END_CONN | FC_FC_SEQ_INIT | FC_FC_RETX_SEQ | FC_FC_UNI_TX; f_ctl ^= FC_FC_EX_CTX | FC_FC_SEQ_CTX; hton24(fh->fh_f_ctl, f_ctl); fc_exch_setup_hdr(ep, fp, f_ctl); fh->fh_seq_id = rx_fh->fh_seq_id; fh->fh_seq_cnt = rx_fh->fh_seq_cnt; fh->fh_parm_offset = htonl(1); /* ack single frame */ fr_sof(fp) = fr_sof(rx_fp); if (f_ctl & FC_FC_END_SEQ) fr_eof(fp) = FC_EOF_T; else fr_eof(fp) = FC_EOF_N; (void) lp->tt.frame_send(lp, fp); } } /* * Send BLS Reject. * This is for rejecting BA_ABTS only. */ static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason, enum fc_ba_rjt_explan explan) { struct fc_frame *fp; struct fc_frame_header *rx_fh; struct fc_frame_header *fh; struct fc_ba_rjt *rp; struct fc_lport *lp; unsigned int f_ctl; lp = fr_dev(rx_fp); fp = fc_frame_alloc(lp, sizeof(*rp)); if (!fp) return; fh = fc_frame_header_get(fp); rx_fh = fc_frame_header_get(rx_fp); memset(fh, 0, sizeof(*fh) + sizeof(*rp)); rp = fc_frame_payload_get(fp, sizeof(*rp)); rp->br_reason = reason; rp->br_explan = explan; /* * seq_id, cs_ctl, df_ctl and param/offset are zero. */ memcpy(fh->fh_s_id, rx_fh->fh_d_id, 3); memcpy(fh->fh_d_id, rx_fh->fh_s_id, 3); fh->fh_ox_id = rx_fh->fh_rx_id; fh->fh_rx_id = rx_fh->fh_ox_id; fh->fh_seq_cnt = rx_fh->fh_seq_cnt; fh->fh_r_ctl = FC_RCTL_BA_RJT; fh->fh_type = FC_TYPE_BLS; /* * Form f_ctl by inverting EX_CTX and SEQ_CTX (bits 23, 22). * Echo FIRST_SEQ, LAST_SEQ, END_SEQ, END_CONN, SEQ_INIT. * Bits 9-8 are meaningful (retransmitted or unidirectional). * Last ACK uses bits 7-6 (continue sequence), * bits 5-4 are meaningful (what kind of ACK to use). * Always set LAST_SEQ, END_SEQ. */ f_ctl = ntoh24(rx_fh->fh_f_ctl); f_ctl &= FC_FC_EX_CTX | FC_FC_SEQ_CTX | FC_FC_END_CONN | FC_FC_SEQ_INIT | FC_FC_RETX_SEQ | FC_FC_UNI_TX; f_ctl ^= FC_FC_EX_CTX | FC_FC_SEQ_CTX; f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ; f_ctl &= ~FC_FC_FIRST_SEQ; hton24(fh->fh_f_ctl, f_ctl); fr_sof(fp) = fc_sof_class(fr_sof(rx_fp)); fr_eof(fp) = FC_EOF_T; if (fc_sof_needs_ack(fr_sof(fp))) fr_eof(fp) = FC_EOF_N; (void) lp->tt.frame_send(lp, fp); } /* * Handle an incoming ABTS. This would be for target mode usually, * but could be due to lost FCP transfer ready, confirm or RRQ. * We always handle this as an exchange abort, ignoring the parameter. */ static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp) { struct fc_frame *fp; struct fc_ba_acc *ap; struct fc_frame_header *fh; struct fc_seq *sp; if (!ep) goto reject; spin_lock_bh(&ep->ex_lock); if (ep->esb_stat & ESB_ST_COMPLETE) { spin_unlock_bh(&ep->ex_lock); goto reject; } if (!(ep->esb_stat & ESB_ST_REC_QUAL)) fc_exch_hold(ep); /* hold for REC_QUAL */ ep->esb_stat |= ESB_ST_ABNORMAL | ESB_ST_REC_QUAL; fc_exch_timer_set_locked(ep, ep->r_a_tov); fp = fc_frame_alloc(ep->lp, sizeof(*ap)); if (!fp) { spin_unlock_bh(&ep->ex_lock); goto free; } fh = fc_frame_header_get(fp); ap = fc_frame_payload_get(fp, sizeof(*ap)); memset(ap, 0, sizeof(*ap)); sp = &ep->seq; ap->ba_high_seq_cnt = htons(0xffff); if (sp->ssb_stat & SSB_ST_RESP) { ap->ba_seq_id = sp->id; ap->ba_seq_id_val = FC_BA_SEQ_ID_VAL; ap->ba_high_seq_cnt = fh->fh_seq_cnt; ap->ba_low_seq_cnt = htons(sp->cnt); } sp = fc_seq_start_next_locked(sp); spin_unlock_bh(&ep->ex_lock); fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS); fc_frame_free(rx_fp); return; reject: fc_exch_send_ba_rjt(rx_fp, FC_BA_RJT_UNABLE, FC_BA_RJT_INV_XID); free: fc_frame_free(rx_fp); } /* * Handle receive where the other end is originating the sequence. */ static void fc_exch_recv_req(struct fc_lport *lp, struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); struct fc_seq *sp = NULL; struct fc_exch *ep = NULL; enum fc_sof sof; enum fc_eof eof; u32 f_ctl; enum fc_pf_rjt_reason reject; fr_seq(fp) = NULL; reject = fc_seq_lookup_recip(mp, fp); if (reject == FC_RJT_NONE) { sp = fr_seq(fp); /* sequence will be held */ ep = fc_seq_exch(sp); sof = fr_sof(fp); eof = fr_eof(fp); f_ctl = ntoh24(fh->fh_f_ctl); fc_seq_send_ack(sp, fp); /* * Call the receive function. * * The receive function may allocate a new sequence * over the old one, so we shouldn't change the * sequence after this. * * The frame will be freed by the receive function. * If new exch resp handler is valid then call that * first. */ if (ep->resp) ep->resp(sp, fp, ep->arg); else lp->tt.lport_recv(lp, sp, fp); fc_exch_release(ep); /* release from lookup */ } else { FC_DEBUG_EXCH("exch/seq lookup failed: reject %x\n", reject); fc_frame_free(fp); } } /* * Handle receive where the other end is originating the sequence in * response to our exchange. */ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); struct fc_seq *sp; struct fc_exch *ep; enum fc_sof sof; u32 f_ctl; void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); void *ex_resp_arg; int rc; ep = fc_exch_find(mp, ntohs(fh->fh_ox_id)); if (!ep) { atomic_inc(&mp->stats.xid_not_found); goto out; } if (ep->rxid == FC_XID_UNKNOWN) ep->rxid = ntohs(fh->fh_rx_id); if (ep->sid != 0 && ep->sid != ntoh24(fh->fh_d_id)) { atomic_inc(&mp->stats.xid_not_found); goto rel; } if (ep->did != ntoh24(fh->fh_s_id) && ep->did != FC_FID_FLOGI) { atomic_inc(&mp->stats.xid_not_found); goto rel; } sof = fr_sof(fp); if (fc_sof_is_init(sof)) { sp = fc_seq_start_next(&ep->seq); sp->id = fh->fh_seq_id; sp->ssb_stat |= SSB_ST_RESP; } else { sp = &ep->seq; if (sp->id != fh->fh_seq_id) { atomic_inc(&mp->stats.seq_not_found); goto rel; } } f_ctl = ntoh24(fh->fh_f_ctl); fr_seq(fp) = sp; if (f_ctl & FC_FC_SEQ_INIT) ep->esb_stat |= ESB_ST_SEQ_INIT; if (fc_sof_needs_ack(sof)) fc_seq_send_ack(sp, fp); resp = ep->resp; ex_resp_arg = ep->arg; if (fh->fh_type != FC_TYPE_FCP && fr_eof(fp) == FC_EOF_T && (f_ctl & (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) == (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) { spin_lock_bh(&ep->ex_lock); rc = fc_exch_done_locked(ep); WARN_ON(fc_seq_exch(sp) != ep); spin_unlock_bh(&ep->ex_lock); if (!rc) fc_exch_mgr_delete_ep(ep); } /* * Call the receive function. * The sequence is held (has a refcnt) for us, * but not for the receive function. * * The receive function may allocate a new sequence * over the old one, so we shouldn't change the * sequence after this. * * The frame will be freed by the receive function. * If new exch resp handler is valid then call that * first. */ if (resp) resp(sp, fp, ex_resp_arg); else fc_frame_free(fp); fc_exch_release(ep); return; rel: fc_exch_release(ep); out: fc_frame_free(fp); } /* * Handle receive for a sequence where other end is responding to our sequence. */ static void fc_exch_recv_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_seq *sp; sp = fc_seq_lookup_orig(mp, fp); /* doesn't hold sequence */ if (!sp) { atomic_inc(&mp->stats.xid_not_found); FC_DEBUG_EXCH("seq lookup failed\n"); } else { atomic_inc(&mp->stats.non_bls_resp); FC_DEBUG_EXCH("non-BLS response to sequence"); } fc_frame_free(fp); } /* * Handle the response to an ABTS for exchange or sequence. * This can be BA_ACC or BA_RJT. */ static void fc_exch_abts_resp(struct fc_exch *ep, struct fc_frame *fp) { void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); void *ex_resp_arg; struct fc_frame_header *fh; struct fc_ba_acc *ap; struct fc_seq *sp; u16 low; u16 high; int rc = 1, has_rec = 0; fh = fc_frame_header_get(fp); FC_DEBUG_EXCH("exch: BLS rctl %x - %s\n", fh->fh_r_ctl, fc_exch_rctl_name(fh->fh_r_ctl)); if (cancel_delayed_work_sync(&ep->timeout_work)) fc_exch_release(ep); /* release from pending timer hold */ spin_lock_bh(&ep->ex_lock); switch (fh->fh_r_ctl) { case FC_RCTL_BA_ACC: ap = fc_frame_payload_get(fp, sizeof(*ap)); if (!ap) break; /* * Decide whether to establish a Recovery Qualifier. * We do this if there is a non-empty SEQ_CNT range and * SEQ_ID is the same as the one we aborted. */ low = ntohs(ap->ba_low_seq_cnt); high = ntohs(ap->ba_high_seq_cnt); if ((ep->esb_stat & ESB_ST_REC_QUAL) == 0 && (ap->ba_seq_id_val != FC_BA_SEQ_ID_VAL || ap->ba_seq_id == ep->seq_id) && low != high) { ep->esb_stat |= ESB_ST_REC_QUAL; fc_exch_hold(ep); /* hold for recovery qualifier */ has_rec = 1; } break; case FC_RCTL_BA_RJT: break; default: break; } resp = ep->resp; ex_resp_arg = ep->arg; /* do we need to do some other checks here. Can we reuse more of * fc_exch_recv_seq_resp */ sp = &ep->seq; /* * do we want to check END_SEQ as well as LAST_SEQ here? */ if (ep->fh_type != FC_TYPE_FCP && ntoh24(fh->fh_f_ctl) & FC_FC_LAST_SEQ) rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) fc_exch_mgr_delete_ep(ep); if (resp) resp(sp, fp, ex_resp_arg); else fc_frame_free(fp); if (has_rec) fc_exch_timer_set(ep, ep->r_a_tov); } /* * Receive BLS sequence. * This is always a sequence initiated by the remote side. * We may be either the originator or recipient of the exchange. */ static void fc_exch_recv_bls(struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_frame_header *fh; struct fc_exch *ep; u32 f_ctl; fh = fc_frame_header_get(fp); f_ctl = ntoh24(fh->fh_f_ctl); fr_seq(fp) = NULL; ep = fc_exch_find(mp, (f_ctl & FC_FC_EX_CTX) ? ntohs(fh->fh_ox_id) : ntohs(fh->fh_rx_id)); if (ep && (f_ctl & FC_FC_SEQ_INIT)) { spin_lock_bh(&ep->ex_lock); ep->esb_stat |= ESB_ST_SEQ_INIT; spin_unlock_bh(&ep->ex_lock); } if (f_ctl & FC_FC_SEQ_CTX) { /* * A response to a sequence we initiated. * This should only be ACKs for class 2 or F. */ switch (fh->fh_r_ctl) { case FC_RCTL_ACK_1: case FC_RCTL_ACK_0: break; default: FC_DEBUG_EXCH("BLS rctl %x - %s received", fh->fh_r_ctl, fc_exch_rctl_name(fh->fh_r_ctl)); break; } fc_frame_free(fp); } else { switch (fh->fh_r_ctl) { case FC_RCTL_BA_RJT: case FC_RCTL_BA_ACC: if (ep) fc_exch_abts_resp(ep, fp); else fc_frame_free(fp); break; case FC_RCTL_BA_ABTS: fc_exch_recv_abts(ep, fp); break; default: /* ignore junk */ fc_frame_free(fp); break; } } if (ep) fc_exch_release(ep); /* release hold taken by fc_exch_find */ } /* * Accept sequence with LS_ACC. * If this fails due to allocation or transmit congestion, assume the * originator will repeat the sequence. */ static void fc_seq_ls_acc(struct fc_seq *req_sp) { struct fc_seq *sp; struct fc_els_ls_acc *acc; struct fc_frame *fp; sp = fc_seq_start_next(req_sp); fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*acc)); if (fp) { acc = fc_frame_payload_get(fp, sizeof(*acc)); memset(acc, 0, sizeof(*acc)); acc->la_cmd = ELS_LS_ACC; fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); } } /* * Reject sequence with ELS LS_RJT. * If this fails due to allocation or transmit congestion, assume the * originator will repeat the sequence. */ static void fc_seq_ls_rjt(struct fc_seq *req_sp, enum fc_els_rjt_reason reason, enum fc_els_rjt_explan explan) { struct fc_seq *sp; struct fc_els_ls_rjt *rjt; struct fc_frame *fp; sp = fc_seq_start_next(req_sp); fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*rjt)); if (fp) { rjt = fc_frame_payload_get(fp, sizeof(*rjt)); memset(rjt, 0, sizeof(*rjt)); rjt->er_cmd = ELS_LS_RJT; rjt->er_reason = reason; rjt->er_explan = explan; fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); } } static void fc_exch_reset(struct fc_exch *ep) { struct fc_seq *sp; void (*resp)(struct fc_seq *, struct fc_frame *, void *); void *arg; int rc = 1; spin_lock_bh(&ep->ex_lock); ep->state |= FC_EX_RST_CLEANUP; /* * we really want to call del_timer_sync, but cannot due * to the lport calling with the lport lock held (some resp * functions can also grab the lport lock which could cause * a deadlock). */ if (cancel_delayed_work(&ep->timeout_work)) atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ resp = ep->resp; ep->resp = NULL; if (ep->esb_stat & ESB_ST_REC_QUAL) atomic_dec(&ep->ex_refcnt); /* drop hold for rec_qual */ ep->esb_stat &= ~ESB_ST_REC_QUAL; arg = ep->arg; sp = &ep->seq; rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) fc_exch_mgr_delete_ep(ep); if (resp) resp(sp, ERR_PTR(-FC_EX_CLOSED), arg); } /* * Reset an exchange manager, releasing all sequences and exchanges. * If sid is non-zero, reset only exchanges we source from that FID. * If did is non-zero, reset only exchanges destined to that FID. */ void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) { struct fc_exch *ep; struct fc_exch *next; struct fc_exch_mgr *mp = lp->emp; spin_lock_bh(&mp->em_lock); restart: list_for_each_entry_safe(ep, next, &mp->ex_list, ex_list) { if ((sid == 0 || sid == ep->sid) && (did == 0 || did == ep->did)) { fc_exch_hold(ep); spin_unlock_bh(&mp->em_lock); fc_exch_reset(ep); fc_exch_release(ep); spin_lock_bh(&mp->em_lock); /* * must restart loop incase while lock was down * multiple eps were released. */ goto restart; } } spin_unlock_bh(&mp->em_lock); } EXPORT_SYMBOL(fc_exch_mgr_reset); /* * Handle incoming ELS REC - Read Exchange Concise. * Note that the requesting port may be different than the S_ID in the request. */ static void fc_exch_els_rec(struct fc_seq *sp, struct fc_frame *rfp) { struct fc_frame *fp; struct fc_exch *ep; struct fc_exch_mgr *em; struct fc_els_rec *rp; struct fc_els_rec_acc *acc; enum fc_els_rjt_reason reason = ELS_RJT_LOGIC; enum fc_els_rjt_explan explan; u32 sid; u16 rxid; u16 oxid; rp = fc_frame_payload_get(rfp, sizeof(*rp)); explan = ELS_EXPL_INV_LEN; if (!rp) goto reject; sid = ntoh24(rp->rec_s_id); rxid = ntohs(rp->rec_rx_id); oxid = ntohs(rp->rec_ox_id); /* * Currently it's hard to find the local S_ID from the exchange * manager. This will eventually be fixed, but for now it's easier * to lookup the subject exchange twice, once as if we were * the initiator, and then again if we weren't. */ em = fc_seq_exch(sp)->em; ep = fc_exch_find(em, oxid); explan = ELS_EXPL_OXID_RXID; if (ep && ep->oid == sid) { if (ep->rxid != FC_XID_UNKNOWN && rxid != FC_XID_UNKNOWN && ep->rxid != rxid) goto rel; } else { if (ep) fc_exch_release(ep); ep = NULL; if (rxid != FC_XID_UNKNOWN) ep = fc_exch_find(em, rxid); if (!ep) goto reject; } fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*acc)); if (!fp) { fc_exch_done(sp); goto out; } sp = fc_seq_start_next(sp); acc = fc_frame_payload_get(fp, sizeof(*acc)); memset(acc, 0, sizeof(*acc)); acc->reca_cmd = ELS_LS_ACC; acc->reca_ox_id = rp->rec_ox_id; memcpy(acc->reca_ofid, rp->rec_s_id, 3); acc->reca_rx_id = htons(ep->rxid); if (ep->sid == ep->oid) hton24(acc->reca_rfid, ep->did); else hton24(acc->reca_rfid, ep->sid); acc->reca_fc4value = htonl(ep->seq.rec_data); acc->reca_e_stat = htonl(ep->esb_stat & (ESB_ST_RESP | ESB_ST_SEQ_INIT | ESB_ST_COMPLETE)); sp = fc_seq_start_next(sp); fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); out: fc_exch_release(ep); fc_frame_free(rfp); return; rel: fc_exch_release(ep); reject: fc_seq_ls_rjt(sp, reason, explan); fc_frame_free(rfp); } /* * Handle response from RRQ. * Not much to do here, really. * Should report errors. * * TODO: fix error handler. */ static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg) { struct fc_exch *aborted_ep = arg; unsigned int op; if (IS_ERR(fp)) { int err = PTR_ERR(fp); if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT) goto cleanup; FC_DBG("Cannot process RRQ, because of frame error %d\n", err); return; } op = fc_frame_payload_op(fp); fc_frame_free(fp); switch (op) { case ELS_LS_RJT: FC_DBG("LS_RJT for RRQ"); /* fall through */ case ELS_LS_ACC: goto cleanup; default: FC_DBG("unexpected response op %x for RRQ", op); return; } cleanup: fc_exch_done(&aborted_ep->seq); /* drop hold for rec qual */ fc_exch_release(aborted_ep); } /* * Send ELS RRQ - Reinstate Recovery Qualifier. * This tells the remote port to stop blocking the use of * the exchange and the seq_cnt range. */ static void fc_exch_rrq(struct fc_exch *ep) { struct fc_lport *lp; struct fc_els_rrq *rrq; struct fc_frame *fp; struct fc_seq *rrq_sp; u32 did; lp = ep->lp; fp = fc_frame_alloc(lp, sizeof(*rrq)); if (!fp) return; rrq = fc_frame_payload_get(fp, sizeof(*rrq)); memset(rrq, 0, sizeof(*rrq)); rrq->rrq_cmd = ELS_RRQ; hton24(rrq->rrq_s_id, ep->sid); rrq->rrq_ox_id = htons(ep->oxid); rrq->rrq_rx_id = htons(ep->rxid); did = ep->did; if (ep->esb_stat & ESB_ST_RESP) did = ep->sid; fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, did, fc_host_port_id(lp->host), FC_TYPE_ELS, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); rrq_sp = fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, lp->e_d_tov); if (!rrq_sp) { ep->esb_stat |= ESB_ST_REC_QUAL; fc_exch_timer_set_locked(ep, ep->r_a_tov); return; } } /* * Handle incoming ELS RRQ - Reset Recovery Qualifier. */ static void fc_exch_els_rrq(struct fc_seq *sp, struct fc_frame *fp) { struct fc_exch *ep; /* request or subject exchange */ struct fc_els_rrq *rp; u32 sid; u16 xid; enum fc_els_rjt_explan explan; rp = fc_frame_payload_get(fp, sizeof(*rp)); explan = ELS_EXPL_INV_LEN; if (!rp) goto reject; /* * lookup subject exchange. */ ep = fc_seq_exch(sp); sid = ntoh24(rp->rrq_s_id); /* subject source */ xid = ep->did == sid ? ntohs(rp->rrq_ox_id) : ntohs(rp->rrq_rx_id); ep = fc_exch_find(ep->em, xid); explan = ELS_EXPL_OXID_RXID; if (!ep) goto reject; spin_lock_bh(&ep->ex_lock); if (ep->oxid != ntohs(rp->rrq_ox_id)) goto unlock_reject; if (ep->rxid != ntohs(rp->rrq_rx_id) && ep->rxid != FC_XID_UNKNOWN) goto unlock_reject; explan = ELS_EXPL_SID; if (ep->sid != sid) goto unlock_reject; /* * Clear Recovery Qualifier state, and cancel timer if complete. */ if (ep->esb_stat & ESB_ST_REC_QUAL) { ep->esb_stat &= ~ESB_ST_REC_QUAL; atomic_dec(&ep->ex_refcnt); /* drop hold for rec qual */ } if (ep->esb_stat & ESB_ST_COMPLETE) { if (cancel_delayed_work(&ep->timeout_work)) atomic_dec(&ep->ex_refcnt); /* drop timer hold */ } spin_unlock_bh(&ep->ex_lock); /* * Send LS_ACC. */ fc_seq_ls_acc(sp); fc_frame_free(fp); return; unlock_reject: spin_unlock_bh(&ep->ex_lock); fc_exch_release(ep); /* drop hold from fc_exch_find */ reject: fc_seq_ls_rjt(sp, ELS_RJT_LOGIC, explan); fc_frame_free(fp); } struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp, enum fc_class class, u16 min_xid, u16 max_xid) { struct fc_exch_mgr *mp; size_t len; if (max_xid <= min_xid || min_xid == 0 || max_xid == FC_XID_UNKNOWN) { FC_DBG("Invalid min_xid 0x:%x and max_xid 0x:%x\n", min_xid, max_xid); return NULL; } /* * Memory need for EM */ #define xid_ok(i, m1, m2) (((i) >= (m1)) && ((i) <= (m2))) len = (max_xid - min_xid + 1) * (sizeof(struct fc_exch *)); len += sizeof(struct fc_exch_mgr); mp = kzalloc(len, GFP_ATOMIC); if (!mp) return NULL; mp->class = class; mp->total_exches = 0; mp->exches = (struct fc_exch **)(mp + 1); mp->lp = lp; /* adjust em exch xid range for offload */ mp->min_xid = min_xid; mp->max_xid = max_xid; mp->last_xid = min_xid - 1; mp->max_read = 0; mp->last_read = 0; if (lp->lro_enabled && xid_ok(lp->lro_xid, min_xid, max_xid)) { mp->max_read = lp->lro_xid; mp->last_read = min_xid - 1; mp->last_xid = mp->max_read; } else { /* disable lro if no xid control over read */ lp->lro_enabled = 0; } INIT_LIST_HEAD(&mp->ex_list); spin_lock_init(&mp->em_lock); mp->ep_pool = mempool_create_slab_pool(2, fc_em_cachep); if (!mp->ep_pool) goto free_mp; return mp; free_mp: kfree(mp); return NULL; } EXPORT_SYMBOL(fc_exch_mgr_alloc); void fc_exch_mgr_free(struct fc_exch_mgr *mp) { WARN_ON(!mp); /* * The total exch count must be zero * before freeing exchange manager. */ WARN_ON(mp->total_exches != 0); mempool_destroy(mp->ep_pool); kfree(mp); } EXPORT_SYMBOL(fc_exch_mgr_free); struct fc_exch *fc_exch_get(struct fc_lport *lp, struct fc_frame *fp) { if (!lp || !lp->emp) return NULL; return fc_exch_alloc(lp->emp, fp, 0); } EXPORT_SYMBOL(fc_exch_get); struct fc_seq *fc_exch_seq_send(struct fc_lport *lp, struct fc_frame *fp, void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg), void (*destructor)(struct fc_seq *, void *), void *arg, u32 timer_msec) { struct fc_exch *ep; struct fc_seq *sp = NULL; struct fc_frame_header *fh; int rc = 1; ep = lp->tt.exch_get(lp, fp); if (!ep) { fc_frame_free(fp); return NULL; } ep->esb_stat |= ESB_ST_SEQ_INIT; fh = fc_frame_header_get(fp); fc_exch_set_addr(ep, ntoh24(fh->fh_s_id), ntoh24(fh->fh_d_id)); ep->resp = resp; ep->destructor = destructor; ep->arg = arg; ep->r_a_tov = FC_DEF_R_A_TOV; ep->lp = lp; sp = &ep->seq; ep->fh_type = fh->fh_type; /* save for possbile timeout handling */ ep->f_ctl = ntoh24(fh->fh_f_ctl); fc_exch_setup_hdr(ep, fp, ep->f_ctl); sp->cnt++; if (unlikely(lp->tt.frame_send(lp, fp))) goto err; if (timer_msec) fc_exch_timer_set_locked(ep, timer_msec); ep->f_ctl &= ~FC_FC_FIRST_SEQ; /* not first seq */ if (ep->f_ctl & FC_FC_SEQ_INIT) ep->esb_stat &= ~ESB_ST_SEQ_INIT; spin_unlock_bh(&ep->ex_lock); return sp; err: rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) fc_exch_mgr_delete_ep(ep); return NULL; } EXPORT_SYMBOL(fc_exch_seq_send); /* * Receive a frame */ void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); u32 f_ctl; /* lport lock ? */ if (!lp || !mp || (lp->state == LPORT_ST_NONE)) { FC_DBG("fc_lport or EM is not allocated and configured"); fc_frame_free(fp); return; } /* * If frame is marked invalid, just drop it. */ f_ctl = ntoh24(fh->fh_f_ctl); switch (fr_eof(fp)) { case FC_EOF_T: if (f_ctl & FC_FC_END_SEQ) skb_trim(fp_skb(fp), fr_len(fp) - FC_FC_FILL(f_ctl)); /* fall through */ case FC_EOF_N: if (fh->fh_type == FC_TYPE_BLS) fc_exch_recv_bls(mp, fp); else if ((f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == FC_FC_EX_CTX) fc_exch_recv_seq_resp(mp, fp); else if (f_ctl & FC_FC_SEQ_CTX) fc_exch_recv_resp(mp, fp); else fc_exch_recv_req(lp, mp, fp); break; default: FC_DBG("dropping invalid frame (eof %x)", fr_eof(fp)); fc_frame_free(fp); break; } } EXPORT_SYMBOL(fc_exch_recv); int fc_exch_init(struct fc_lport *lp) { if (!lp->tt.exch_get) { /* * exch_put() should be NULL if * exch_get() is NULL */ WARN_ON(lp->tt.exch_put); lp->tt.exch_get = fc_exch_get; } if (!lp->tt.seq_start_next) lp->tt.seq_start_next = fc_seq_start_next; if (!lp->tt.exch_seq_send) lp->tt.exch_seq_send = fc_exch_seq_send; if (!lp->tt.seq_send) lp->tt.seq_send = fc_seq_send; if (!lp->tt.seq_els_rsp_send) lp->tt.seq_els_rsp_send = fc_seq_els_rsp_send; if (!lp->tt.exch_done) lp->tt.exch_done = fc_exch_done; if (!lp->tt.exch_mgr_reset) lp->tt.exch_mgr_reset = fc_exch_mgr_reset; if (!lp->tt.seq_exch_abort) lp->tt.seq_exch_abort = fc_seq_exch_abort; return 0; } EXPORT_SYMBOL(fc_exch_init); int fc_setup_exch_mgr(void) { fc_em_cachep = kmem_cache_create("libfc_em", sizeof(struct fc_exch), 0, SLAB_HWCACHE_ALIGN, NULL); if (!fc_em_cachep) return -ENOMEM; return 0; } void fc_destroy_exch_mgr(void) { kmem_cache_destroy(fc_em_cachep); }