/* * Universal Host Controller Interface driver for USB. * * Maintainer: Alan Stern * * (C) Copyright 1999 Linus Torvalds * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com * (C) Copyright 1999 Randy Dunlap * (C) Copyright 1999 Georg Acher, acher@in.tum.de * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu */ static __u8 root_hub_hub_des[] = { 0x09, /* __u8 bLength; */ 0x29, /* __u8 bDescriptorType; Hub-descriptor */ 0x02, /* __u8 bNbrPorts; */ 0x0a, /* __u16 wHubCharacteristics; */ 0x00, /* (per-port OC, no power switching) */ 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ 0x00, /* __u8 bHubContrCurrent; 0 mA */ 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ }; #define UHCI_RH_MAXCHILD 7 /* must write as zeroes */ #define WZ_BITS (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4) /* status change bits: nonzero writes will clear */ #define RWC_BITS (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC) /* A port that either is connected or has a changed-bit set will prevent * us from AUTO_STOPPING. */ static int any_ports_active(struct uhci_hcd *uhci) { int port; for (port = 0; port < uhci->rh_numports; ++port) { if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & (USBPORTSC_CCS | RWC_BITS)) || test_bit(port, &uhci->port_c_suspend)) return 1; } return 0; } static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf) { int port; *buf = 0; for (port = 0; port < uhci->rh_numports; ++port) { if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) || test_bit(port, &uhci->port_c_suspend)) *buf |= (1 << (port + 1)); } return !!*buf; } #define OK(x) len = (x); break #define CLR_RH_PORTSTAT(x) \ status = inw(port_addr); \ status &= ~(RWC_BITS|WZ_BITS); \ status &= ~(x); \ status |= RWC_BITS & (x); \ outw(status, port_addr) #define SET_RH_PORTSTAT(x) \ status = inw(port_addr); \ status |= (x); \ status &= ~(RWC_BITS|WZ_BITS); \ outw(status, port_addr) /* UHCI controllers don't automatically stop resume signalling after 20 msec, * so we have to poll and check timeouts in order to take care of it. */ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, unsigned long port_addr) { int status; if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) { CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD); if (test_bit(port, &uhci->resuming_ports)) set_bit(port, &uhci->port_c_suspend); /* The controller won't actually turn off the RD bit until * it has had a chance to send a low-speed EOP sequence, * which takes 3 bit times (= 2 microseconds). We'll delay * slightly longer for good luck. */ udelay(4); } clear_bit(port, &uhci->resuming_ports); } /* Wait for the UHCI controller in HP's iLO2 server management chip. * It can take up to 250 us to finish a reset and set the CSC bit. */ static void wait_for_HP(unsigned long port_addr) { int i; for (i = 10; i < 250; i += 10) { if (inw(port_addr) & USBPORTSC_CSC) return; udelay(10); } /* Log a warning? */ } static void uhci_check_ports(struct uhci_hcd *uhci) { unsigned int port; unsigned long port_addr; int status; for (port = 0; port < uhci->rh_numports; ++port) { port_addr = uhci->io_addr + USBPORTSC1 + 2 * port; status = inw(port_addr); if (unlikely(status & USBPORTSC_PR)) { if (time_after_eq(jiffies, uhci->ports_timeout)) { CLR_RH_PORTSTAT(USBPORTSC_PR); udelay(10); /* HP's server management chip requires * a longer delay. */ if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP) wait_for_HP(port_addr); /* If the port was enabled before, turning * reset on caused a port enable change. * Turning reset off causes a port connect * status change. Clear these changes. */ CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC); SET_RH_PORTSTAT(USBPORTSC_PE); } } if (unlikely(status & USBPORTSC_RD)) { if (!test_bit(port, &uhci->resuming_ports)) { /* Port received a wakeup request */ set_bit(port, &uhci->resuming_ports); uhci->ports_timeout = jiffies + msecs_to_jiffies(20); /* Make sure we see the port again * after the resuming period is over. */ mod_timer(&uhci_to_hcd(uhci)->rh_timer, uhci->ports_timeout); } else if (time_after_eq(jiffies, uhci->ports_timeout)) { uhci_finish_suspend(uhci, port, port_addr); } } } } static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); unsigned long flags; int status = 0; spin_lock_irqsave(&uhci->lock, flags); uhci_scan_schedule(uhci, NULL); if (uhci->hc_inaccessible) goto done; uhci_check_ports(uhci); status = get_hub_status_data(uhci, buf); switch (uhci->rh_state) { case UHCI_RH_SUSPENDING: case UHCI_RH_SUSPENDED: /* if port change, ask to be resumed */ if (status) usb_hcd_resume_root_hub(hcd); break; case UHCI_RH_AUTO_STOPPED: /* if port change, auto start */ if (status) wakeup_rh(uhci); break; case UHCI_RH_RUNNING: /* are any devices attached? */ if (!any_ports_active(uhci)) { uhci->rh_state = UHCI_RH_RUNNING_NODEVS; uhci->auto_stop_time = jiffies + HZ; } break; case UHCI_RH_RUNNING_NODEVS: /* auto-stop if nothing connected for 1 second */ if (any_ports_active(uhci)) uhci->rh_state = UHCI_RH_RUNNING; else if (time_after_eq(jiffies, uhci->auto_stop_time)) suspend_rh(uhci, UHCI_RH_AUTO_STOPPED); break; default: break; } done: spin_unlock_irqrestore(&uhci->lock, flags); return status; } /* size of returned buffer is part of USB spec */ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); int status, lstatus, retval = 0, len = 0; unsigned int port = wIndex - 1; unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * port; u16 wPortChange, wPortStatus; unsigned long flags; if (uhci->hc_inaccessible) return -ETIMEDOUT; spin_lock_irqsave(&uhci->lock, flags); switch (typeReq) { case GetHubStatus: *(__le32 *)buf = cpu_to_le32(0); OK(4); /* hub power */ case GetPortStatus: if (port >= uhci->rh_numports) goto err; uhci_check_ports(uhci); status = inw(port_addr); /* Intel controllers report the OverCurrent bit active on. * VIA controllers report it active off, so we'll adjust the * bit value. (It's not standardized in the UHCI spec.) */ if (to_pci_dev(hcd->self.controller)->vendor == PCI_VENDOR_ID_VIA) status ^= USBPORTSC_OC; /* UHCI doesn't support C_RESET (always false) */ wPortChange = lstatus = 0; if (status & USBPORTSC_CSC) wPortChange |= USB_PORT_STAT_C_CONNECTION; if (status & USBPORTSC_PEC) wPortChange |= USB_PORT_STAT_C_ENABLE; if (status & USBPORTSC_OCC) wPortChange |= USB_PORT_STAT_C_OVERCURRENT; if (test_bit(port, &uhci->port_c_suspend)) { wPortChange |= USB_PORT_STAT_C_SUSPEND; lstatus |= 1; } if (test_bit(port, &uhci->resuming_ports)) lstatus |= 4; /* UHCI has no power switching (always on) */ wPortStatus = USB_PORT_STAT_POWER; if (status & USBPORTSC_CCS) wPortStatus |= USB_PORT_STAT_CONNECTION; if (status & USBPORTSC_PE) { wPortStatus |= USB_PORT_STAT_ENABLE; if (status & (USBPORTSC_SUSP | USBPORTSC_RD)) wPortStatus |= USB_PORT_STAT_SUSPEND; } if (status & USBPORTSC_OC) wPortStatus |= USB_PORT_STAT_OVERCURRENT; if (status & USBPORTSC_PR) wPortStatus |= USB_PORT_STAT_RESET; if (status & USBPORTSC_LSDA) wPortStatus |= USB_PORT_STAT_LOW_SPEED; if (wPortChange) dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n", wIndex, status, lstatus); *(__le16 *)buf = cpu_to_le16(wPortStatus); *(__le16 *)(buf + 2) = cpu_to_le16(wPortChange); OK(4); case SetHubFeature: /* We don't implement these */ case ClearHubFeature: switch (wValue) { case C_HUB_OVER_CURRENT: case C_HUB_LOCAL_POWER: OK(0); default: goto err; } break; case SetPortFeature: if (port >= uhci->rh_numports) goto err; switch (wValue) { case USB_PORT_FEAT_SUSPEND: SET_RH_PORTSTAT(USBPORTSC_SUSP); OK(0); case USB_PORT_FEAT_RESET: SET_RH_PORTSTAT(USBPORTSC_PR); /* Reset terminates Resume signalling */ uhci_finish_suspend(uhci, port, port_addr); /* USB v2.0 7.1.7.5 */ uhci->ports_timeout = jiffies + msecs_to_jiffies(50); OK(0); case USB_PORT_FEAT_POWER: /* UHCI has no power switching */ OK(0); default: goto err; } break; case ClearPortFeature: if (port >= uhci->rh_numports) goto err; switch (wValue) { case USB_PORT_FEAT_ENABLE: CLR_RH_PORTSTAT(USBPORTSC_PE); /* Disable terminates Resume signalling */ uhci_finish_suspend(uhci, port, port_addr); OK(0); case USB_PORT_FEAT_C_ENABLE: CLR_RH_PORTSTAT(USBPORTSC_PEC); OK(0); case USB_PORT_FEAT_SUSPEND: if (!(inw(port_addr) & USBPORTSC_SUSP)) { /* Make certain the port isn't suspended */ uhci_finish_suspend(uhci, port, port_addr); } else if (!test_and_set_bit(port, &uhci->resuming_ports)) { SET_RH_PORTSTAT(USBPORTSC_RD); /* The controller won't allow RD to be set * if the port is disabled. When this happens * just skip the Resume signalling. */ if (!(inw(port_addr) & USBPORTSC_RD)) uhci_finish_suspend(uhci, port, port_addr); else /* USB v2.0 7.1.7.7 */ uhci->ports_timeout = jiffies + msecs_to_jiffies(20); } OK(0); case USB_PORT_FEAT_C_SUSPEND: clear_bit(port, &uhci->port_c_suspend); OK(0); case USB_PORT_FEAT_POWER: /* UHCI has no power switching */ goto err; case USB_PORT_FEAT_C_CONNECTION: CLR_RH_PORTSTAT(USBPORTSC_CSC); OK(0); case USB_PORT_FEAT_C_OVER_CURRENT: CLR_RH_PORTSTAT(USBPORTSC_OCC); OK(0); case USB_PORT_FEAT_C_RESET: /* this driver won't report these */ OK(0); default: goto err; } break; case GetHubDescriptor: len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength); memcpy(buf, root_hub_hub_des, len); if (len > 2) buf[2] = uhci->rh_numports; OK(len); default: err: retval = -EPIPE; } spin_unlock_irqrestore(&uhci->lock, flags); return retval; }