# # USB Storage driver configuration # comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" comment "may also be needed; see USB_STORAGE Help for more information" depends on USB config USB_STORAGE tristate "USB Mass Storage support" depends on USB && SCSI ---help--- Say Y here if you want to connect USB mass storage devices to your computer's USB port. This is the driver you need for USB floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, USB flash devices, and memory sticks, along with similar devices. This driver may also be used for some cameras and card readers. This option depends on 'SCSI' support being enabled, but you probably also need 'SCSI device support: SCSI disk support' (BLK_DEV_SD) for most USB storage devices. To compile this driver as a module, choose M here: the module will be called usb-storage. config USB_STORAGE_DEBUG bool "USB Mass Storage verbose debug" depends on USB_STORAGE help Say Y here in order to have the USB Mass Storage code generate verbose debugging messages. config USB_STORAGE_DATAFAB bool "Datafab Compact Flash Reader support (EXPERIMENTAL)" depends on USB_STORAGE && EXPERIMENTAL help Support for certain Datafab CompactFlash readers. Datafab has a web page at <http://www.datafabusa.com/>. config USB_STORAGE_FREECOM bool "Freecom USB/ATAPI Bridge support" depends on USB_STORAGE help Support for the Freecom USB to IDE/ATAPI adaptor. Freecom has a web page at <http://www.freecom.de/>. config USB_STORAGE_ISD200 bool "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge. Some of the products that use this chip are: - Archos Jukebox 6000 - ISD SmartCable for Storage - Taiwan Skymaster CD530U/DEL-0241 IDE bridge - Sony CRX10U CD-R/RW drive - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) config USB_STORAGE_DPCM bool "Microtech/ZiO! CompactFlash/SmartMedia support" depends on USB_STORAGE help Say Y here to support the Microtech/ZiO! CompactFlash reader. There is a web page at <http://www.ziocorp.com/products/>. config USB_STORAGE_USBAT bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)" depends on USB_STORAGE && EXPERIMENTAL help Say Y here to include additional code to support storage devices based on the SCM/Shuttle USBAT/USBAT02 processors. Devices reported to work with this driver include: - CompactFlash reader included with Kodak DC3800 camera - Dane-Elec Zmate CompactFlash reader - Delkin Efilm reader2 - HP 8200e/8210e/8230e CD-Writer Plus drives - I-JAM JS-50U - Jessops CompactFlash JESDCFRU BLACK - Kingston Technology PCREAD-USB/CF - Maxell UA4 CompactFlash reader - Memorex UCF-100 - Microtech ZiO! ICS-45 CF2 - RCA LYRA MP3 portable - Sandisk ImageMate SDDR-05b config USB_STORAGE_SDDR09 bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)" depends on USB_STORAGE && EXPERIMENTAL help Say Y here to include additional code to support the Sandisk SDDR-09 SmartMedia reader in the USB Mass Storage driver. Also works for the Microtech Zio! SmartMedia reader. config USB_STORAGE_SDDR55 bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)" depends on USB_STORAGE && EXPERIMENTAL help Say Y here to include additional code to support the Sandisk SDDR-55 SmartMedia reader in the USB Mass Storage driver. config USB_STORAGE_JUMPSHOT bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)" depends on USB_STORAGE && EXPERIMENTAL help Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. config USB_STORAGE_ALAUDA bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)" depends on USB_STORAGE && EXPERIMENTAL help Say Y here to include additional code to support the Olympus MAUSB-10 and Fujifilm DPC-R1 USB Card reader/writer devices. These devices are based on the Alauda chip and support both XD and SmartMedia cards. config USB_STORAGE_ONETOUCH bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)" depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM help Say Y here to include additional code to support the Maxtor OneTouch USB hard drive's onetouch button. This code registers the button on the front of Maxtor OneTouch USB hard drive's as an input device. An action can be associated with this input in any keybinding software. (e.g. gnome's keyboard short- cuts) config USB_STORAGE_KARMA bool "Support for Rio Karma music player" depends on USB_STORAGE help Say Y here to include additional code to support the Rio Karma USB interface. This code places the Rio Karma into mass storage mode, enabling it to be mounted as an ordinary filesystem. Performing an eject on the resulting scsi device node returns the Karma to normal operation. config USB_LIBUSUAL bool "The shared table of common (or usual) storage devices" depends on USB help This module contains a table of common (or usual) devices for usb-storage and ub drivers, and allows to switch binding of these devices without rebuilding modules. Typical syntax of /etc/modprobe.conf is: options libusual bias="ub" If unsure, say N.