/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable * * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $ * * Current development and maintenance by: * (c) 2000, 2001 Robert Baruch (autophile@starband.net) * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org> * * Developed with the assistance of: * (c) 2002 Alan Stern <stern@rowland.org> * * Flash support based on earlier work by: * (c) 2002 Thomas Kreiling <usbdev@sm04.de> * * Many originally ATAPI devices were slightly modified to meet the USB * market by using some kind of translation from ATAPI to USB on the host, * and the peripheral would translate from USB back to ATAPI. * * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only, * which does the USB-to-ATAPI conversion. By obtaining the data sheet on * their device under nondisclosure agreement, I have been able to write * this driver for Linux. * * The chip used in the device can also be used for EPP and ISA translation * as well. This driver is only guaranteed to work with the ATAPI * translation. * * See the Kconfig help text for a list of devices known to be supported by * this driver. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/errno.h> #include <linux/slab.h> #include <linux/cdrom.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include "usb.h" #include "transport.h" #include "protocol.h" #include "debug.h" #include "shuttle_usbat.h" #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) ) #define LSB_of(s) ((s)&0xFF) #define MSB_of(s) ((s)>>8) static int transferred = 0; static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); /* * Convenience function to produce an ATA read/write sectors command * Use cmd=0x20 for read, cmd=0x30 for write */ static void usbat_pack_ata_sector_cmd(unsigned char *buf, unsigned char thistime, u32 sector, unsigned char cmd) { buf[0] = 0; buf[1] = thistime; buf[2] = sector & 0xFF; buf[3] = (sector >> 8) & 0xFF; buf[4] = (sector >> 16) & 0xFF; buf[5] = 0xE0 | ((sector >> 24) & 0x0F); buf[6] = cmd; } /* * Convenience function to get the device type (flash or hp8200) */ static int usbat_get_device_type(struct us_data *us) { return ((struct usbat_info*)us->extra)->devicetype; } /* * Read a register from the device */ static int usbat_read(struct us_data *us, unsigned char access, unsigned char reg, unsigned char *content) { return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, access | USBAT_CMD_READ_REG, 0xC0, (u16)reg, 0, content, 1); } /* * Write to a register on the device */ static int usbat_write(struct us_data *us, unsigned char access, unsigned char reg, unsigned char content) { return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, access | USBAT_CMD_WRITE_REG, 0x40, short_pack(reg, content), 0, NULL, 0); } /* * Convenience function to perform a bulk read */ static int usbat_bulk_read(struct us_data *us, unsigned char *data, unsigned int len, int use_sg) { if (len == 0) return USB_STOR_XFER_GOOD; US_DEBUGP("usbat_bulk_read: len = %d\n", len); return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, data, len, use_sg, NULL); } /* * Convenience function to perform a bulk write */ static int usbat_bulk_write(struct us_data *us, unsigned char *data, unsigned int len, int use_sg) { if (len == 0) return USB_STOR_XFER_GOOD; US_DEBUGP("usbat_bulk_write: len = %d\n", len); return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, data, len, use_sg, NULL); } /* * Some USBAT-specific commands can only be executed over a command transport * This transport allows one (len=8) or two (len=16) vendor-specific commands * to be executed. */ static int usbat_execute_command(struct us_data *us, unsigned char *commands, unsigned int len) { return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, USBAT_CMD_EXEC_CMD, 0x40, 0, 0, commands, len); } /* * Read the status register */ static int usbat_get_status(struct us_data *us, unsigned char *status) { int rc; rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status); US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status)); return rc; } /* * Check the device status */ static int usbat_check_status(struct us_data *us) { unsigned char *reply = us->iobuf; int rc; if (!us) return USB_STOR_TRANSPORT_ERROR; rc = usbat_get_status(us, reply); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_FAILED; /* error/check condition (0x51 is ok) */ if (*reply & 0x01 && *reply != 0x51) return USB_STOR_TRANSPORT_FAILED; /* device fault */ if (*reply & 0x20) return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_GOOD; } /* * Stores critical information in internal registers in prepartion for the execution * of a conditional usbat_read_blocks or usbat_write_blocks call. */ static int usbat_set_shuttle_features(struct us_data *us, unsigned char external_trigger, unsigned char epp_control, unsigned char mask_byte, unsigned char test_pattern, unsigned char subcountH, unsigned char subcountL) { unsigned char *command = us->iobuf; command[0] = 0x40; command[1] = USBAT_CMD_SET_FEAT; /* * The only bit relevant to ATA access is bit 6 * which defines 8 bit data access (set) or 16 bit (unset) */ command[2] = epp_control; /* * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, * ET1 and ET2 define an external event to be checked for on event of a * _read_blocks or _write_blocks operation. The read/write will not take * place unless the defined trigger signal is active. */ command[3] = external_trigger; /* * The resultant byte of the mask operation (see mask_byte) is compared for * equivalence with this test pattern. If equal, the read/write will take * place. */ command[4] = test_pattern; /* * This value is logically ANDed with the status register field specified * in the read/write command. */ command[5] = mask_byte; /* * If ALQ is set in the qualifier, this field contains the address of the * registers where the byte count should be read for transferring the data. * If ALQ is not set, then this field contains the number of bytes to be * transferred. */ command[6] = subcountL; command[7] = subcountH; return usbat_execute_command(us, command, 8); } /* * Block, waiting for an ATA device to become not busy or to report * an error condition. */ static int usbat_wait_not_busy(struct us_data *us, int minutes) { int i; int result; unsigned char *status = us->iobuf; /* Synchronizing cache on a CDR could take a heck of a long time, * but probably not more than 10 minutes or so. On the other hand, * doing a full blank on a CDRW at speed 1 will take about 75 * minutes! */ for (i=0; i<1200+minutes*60; i++) { result = usbat_get_status(us, status); if (result!=USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (*status & 0x01) { /* check condition */ result = usbat_read(us, USBAT_ATA, 0x10, status); return USB_STOR_TRANSPORT_FAILED; } if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; if ((*status & 0x80)==0x00) { /* not busy */ US_DEBUGP("Waited not busy for %d steps\n", i); return USB_STOR_TRANSPORT_GOOD; } if (i<500) msleep(10); /* 5 seconds */ else if (i<700) msleep(50); /* 10 seconds */ else if (i<1200) msleep(100); /* 50 seconds */ else msleep(1000); /* X minutes */ } US_DEBUGP("Waited not busy for %d minutes, timing out.\n", minutes); return USB_STOR_TRANSPORT_FAILED; } /* * Read block data from the data register */ static int usbat_read_block(struct us_data *us, unsigned char *content, unsigned short len, int use_sg) { int result; unsigned char *command = us->iobuf; if (!len) return USB_STOR_TRANSPORT_GOOD; command[0] = 0xC0; command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK; command[2] = USBAT_ATA_DATA; command[3] = 0; command[4] = 0; command[5] = 0; command[6] = LSB_of(len); command[7] = MSB_of(len); result = usbat_execute_command(us, command, 8); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; result = usbat_bulk_read(us, content, len, use_sg); return (result == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); } /* * Write block data via the data register */ static int usbat_write_block(struct us_data *us, unsigned char access, unsigned char *content, unsigned short len, int minutes, int use_sg) { int result; unsigned char *command = us->iobuf; if (!len) return USB_STOR_TRANSPORT_GOOD; command[0] = 0x40; command[1] = access | USBAT_CMD_WRITE_BLOCK; command[2] = USBAT_ATA_DATA; command[3] = 0; command[4] = 0; command[5] = 0; command[6] = LSB_of(len); command[7] = MSB_of(len); result = usbat_execute_command(us, command, 8); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; result = usbat_bulk_write(us, content, len, use_sg); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; return usbat_wait_not_busy(us, minutes); } /* * Process read and write requests */ static int usbat_hp8200e_rw_block_test(struct us_data *us, unsigned char access, unsigned char *registers, unsigned char *data_out, unsigned short num_registers, unsigned char data_reg, unsigned char status_reg, unsigned char timeout, unsigned char qualifier, int direction, unsigned char *content, unsigned short len, int use_sg, int minutes) { int result; unsigned int pipe = (direction == DMA_FROM_DEVICE) ? us->recv_bulk_pipe : us->send_bulk_pipe; unsigned char *command = us->iobuf; int i, j; int cmdlen; unsigned char *data = us->iobuf; unsigned char *status = us->iobuf; BUG_ON(num_registers > US_IOBUF_SIZE/2); for (i=0; i<20; i++) { /* * The first time we send the full command, which consists * of downloading the SCSI command followed by downloading * the data via a write-and-test. Any other time we only * send the command to download the data -- the SCSI command * is still 'active' in some sense in the device. * * We're only going to try sending the data 10 times. After * that, we just return a failure. */ if (i==0) { cmdlen = 16; /* * Write to multiple registers * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is * necessary here, but that's what came out of the * trace every single time. */ command[0] = 0x40; command[1] = access | USBAT_CMD_WRITE_REGS; command[2] = 0x07; command[3] = 0x17; command[4] = 0xFC; command[5] = 0xE7; command[6] = LSB_of(num_registers*2); command[7] = MSB_of(num_registers*2); } else cmdlen = 8; /* Conditionally read or write blocks */ command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); command[cmdlen-7] = access | (direction==DMA_TO_DEVICE ? USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK); command[cmdlen-6] = data_reg; command[cmdlen-5] = status_reg; command[cmdlen-4] = timeout; command[cmdlen-3] = qualifier; command[cmdlen-2] = LSB_of(len); command[cmdlen-1] = MSB_of(len); result = usbat_execute_command(us, command, cmdlen); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (i==0) { for (j=0; j<num_registers; j++) { data[j<<1] = registers[j]; data[1+(j<<1)] = data_out[j]; } result = usbat_bulk_write(us, data, num_registers*2, 0); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; } result = usb_stor_bulk_transfer_sg(us, pipe, content, len, use_sg, NULL); /* * If we get a stall on the bulk download, we'll retry * the bulk download -- but not the SCSI command because * in some sense the SCSI command is still 'active' and * waiting for the data. Don't ask me why this should be; * I'm only following what the Windoze driver did. * * Note that a stall for the test-and-read/write command means * that the test failed. In this case we're testing to make * sure that the device is error-free * (i.e. bit 0 -- CHK -- of status is 0). The most likely * hypothesis is that the USBAT chip somehow knows what * the device will accept, but doesn't give the device any * data until all data is received. Thus, the device would * still be waiting for the first byte of data if a stall * occurs, even if the stall implies that some data was * transferred. */ if (result == USB_STOR_XFER_SHORT || result == USB_STOR_XFER_STALLED) { /* * If we're reading and we stalled, then clear * the bulk output pipe only the first time. */ if (direction==DMA_FROM_DEVICE && i==0) { if (usb_stor_clear_halt(us, us->send_bulk_pipe) < 0) return USB_STOR_TRANSPORT_ERROR; } /* * Read status: is the device angry, or just busy? */ result = usbat_read(us, USBAT_ATA, direction==DMA_TO_DEVICE ? USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS, status); if (result!=USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (*status & 0x01) /* check condition */ return USB_STOR_TRANSPORT_FAILED; if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; US_DEBUGP("Redoing %s\n", direction==DMA_TO_DEVICE ? "write" : "read"); } else if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; else return usbat_wait_not_busy(us, minutes); } US_DEBUGP("Bummer! %s bulk data 20 times failed.\n", direction==DMA_TO_DEVICE ? "Writing" : "Reading"); return USB_STOR_TRANSPORT_FAILED; } /* * Write to multiple registers: * Allows us to write specific data to any registers. The data to be written * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN * which gets sent through bulk out. * Not designed for large transfers of data! */ static int usbat_multiple_write(struct us_data *us, unsigned char *registers, unsigned char *data_out, unsigned short num_registers) { int i, result; unsigned char *data = us->iobuf; unsigned char *command = us->iobuf; BUG_ON(num_registers > US_IOBUF_SIZE/2); /* Write to multiple registers, ATA access */ command[0] = 0x40; command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; /* No relevance */ command[2] = 0; command[3] = 0; command[4] = 0; command[5] = 0; /* Number of bytes to be transferred (incl. addresses and data) */ command[6] = LSB_of(num_registers*2); command[7] = MSB_of(num_registers*2); /* The setup command */ result = usbat_execute_command(us, command, 8); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; /* Create the reg/data, reg/data sequence */ for (i=0; i<num_registers; i++) { data[i<<1] = registers[i]; data[1+(i<<1)] = data_out[i]; } /* Send the data */ result = usbat_bulk_write(us, data, num_registers*2, 0); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_get_device_type(us) == USBAT_DEV_HP8200) return usbat_wait_not_busy(us, 0); else return USB_STOR_TRANSPORT_GOOD; } /* * Conditionally read blocks from device: * Allows us to read blocks from a specific data register, based upon the * condition that a status register can be successfully masked with a status * qualifier. If this condition is not initially met, the read will wait * up until a maximum amount of time has elapsed, as specified by timeout. * The read will start when the condition is met, otherwise the command aborts. * * The qualifier defined here is not the value that is masked, it defines * conditions for the write to take place. The actual masked qualifier (and * other related details) are defined beforehand with _set_shuttle_features(). */ static int usbat_read_blocks(struct us_data *us, unsigned char *buffer, int len, int use_sg) { int result; unsigned char *command = us->iobuf; command[0] = 0xC0; command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK; command[2] = USBAT_ATA_DATA; command[3] = USBAT_ATA_STATUS; command[4] = 0xFD; /* Timeout (ms); */ command[5] = USBAT_QUAL_FCQ; command[6] = LSB_of(len); command[7] = MSB_of(len); /* Multiple block read setup command */ result = usbat_execute_command(us, command, 8); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_FAILED; /* Read the blocks we just asked for */ result = usbat_bulk_read(us, buffer, len, use_sg); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_GOOD; } /* * Conditionally write blocks to device: * Allows us to write blocks to a specific data register, based upon the * condition that a status register can be successfully masked with a status * qualifier. If this condition is not initially met, the write will wait * up until a maximum amount of time has elapsed, as specified by timeout. * The read will start when the condition is met, otherwise the command aborts. * * The qualifier defined here is not the value that is masked, it defines * conditions for the write to take place. The actual masked qualifier (and * other related details) are defined beforehand with _set_shuttle_features(). */ static int usbat_write_blocks(struct us_data *us, unsigned char *buffer, int len, int use_sg) { int result; unsigned char *command = us->iobuf; command[0] = 0x40; command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK; command[2] = USBAT_ATA_DATA; command[3] = USBAT_ATA_STATUS; command[4] = 0xFD; /* Timeout (ms) */ command[5] = USBAT_QUAL_FCQ; command[6] = LSB_of(len); command[7] = MSB_of(len); /* Multiple block write setup command */ result = usbat_execute_command(us, command, 8); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_FAILED; /* Write the data */ result = usbat_bulk_write(us, buffer, len, use_sg); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_GOOD; } /* * Read the User IO register */ static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags) { int result; result = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, USBAT_CMD_UIO, 0xC0, 0, 0, data_flags, USBAT_UIO_READ); US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags)); return result; } /* * Write to the User IO register */ static int usbat_write_user_io(struct us_data *us, unsigned char enable_flags, unsigned char data_flags) { return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, USBAT_CMD_UIO, 0x40, short_pack(enable_flags, data_flags), 0, NULL, USBAT_UIO_WRITE); } /* * Reset the device * Often needed on media change. */ static int usbat_device_reset(struct us_data *us) { int rc; /* * Reset peripheral, enable peripheral control signals * (bring reset signal up) */ rc = usbat_write_user_io(us, USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_EPAD | USBAT_UIO_1); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; /* * Enable peripheral control signals * (bring reset signal down) */ rc = usbat_write_user_io(us, USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_EPAD | USBAT_UIO_1); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_GOOD; } /* * Enable card detect */ static int usbat_device_enable_cdt(struct us_data *us) { int rc; /* Enable peripheral control signals and card detect */ rc = usbat_write_user_io(us, USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_EPAD | USBAT_UIO_1); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_GOOD; } /* * Determine if media is present. */ static int usbat_flash_check_media_present(unsigned char *uio) { if (*uio & USBAT_UIO_UI0) { US_DEBUGP("usbat_flash_check_media_present: no media detected\n"); return USBAT_FLASH_MEDIA_NONE; } return USBAT_FLASH_MEDIA_CF; } /* * Determine if media has changed since last operation */ static int usbat_flash_check_media_changed(unsigned char *uio) { if (*uio & USBAT_UIO_0) { US_DEBUGP("usbat_flash_check_media_changed: media change detected\n"); return USBAT_FLASH_MEDIA_CHANGED; } return USBAT_FLASH_MEDIA_SAME; } /* * Check for media change / no media and handle the situation appropriately */ static int usbat_flash_check_media(struct us_data *us, struct usbat_info *info) { int rc; unsigned char *uio = us->iobuf; rc = usbat_read_user_io(us, uio); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; /* Check for media existence */ rc = usbat_flash_check_media_present(uio); if (rc == USBAT_FLASH_MEDIA_NONE) { info->sense_key = 0x02; info->sense_asc = 0x3A; info->sense_ascq = 0x00; return USB_STOR_TRANSPORT_FAILED; } /* Check for media change */ rc = usbat_flash_check_media_changed(uio); if (rc == USBAT_FLASH_MEDIA_CHANGED) { /* Reset and re-enable card detect */ rc = usbat_device_reset(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; rc = usbat_device_enable_cdt(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; msleep(50); rc = usbat_read_user_io(us, uio); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; info->sense_key = UNIT_ATTENTION; info->sense_asc = 0x28; info->sense_ascq = 0x00; return USB_STOR_TRANSPORT_FAILED; } return USB_STOR_TRANSPORT_GOOD; } /* * Determine whether we are controlling a flash-based reader/writer, * or a HP8200-based CD drive. * Sets transport functions as appropriate. */ static int usbat_identify_device(struct us_data *us, struct usbat_info *info) { int rc; unsigned char status; if (!us || !info) return USB_STOR_TRANSPORT_ERROR; rc = usbat_device_reset(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; msleep(500); /* * In attempt to distinguish between HP CDRW's and Flash readers, we now * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash * readers), this command should fail with error. On ATAPI devices (i.e. * CDROM drives), it should succeed. */ rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; rc = usbat_get_status(us, &status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; /* Check for error bit, or if the command 'fell through' */ if (status == 0xA1 || !(status & 0x01)) { /* Device is HP 8200 */ US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); info->devicetype = USBAT_DEV_HP8200; } else { /* Device is a CompactFlash reader/writer */ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); info->devicetype = USBAT_DEV_FLASH; } return USB_STOR_TRANSPORT_GOOD; } /* * Set the transport function based on the device type */ static int usbat_set_transport(struct us_data *us, struct usbat_info *info, int devicetype) { if (!info->devicetype) info->devicetype = devicetype; if (!info->devicetype) usbat_identify_device(us, info); switch (info->devicetype) { default: return USB_STOR_TRANSPORT_ERROR; case USBAT_DEV_HP8200: us->transport = usbat_hp8200e_transport; break; case USBAT_DEV_FLASH: us->transport = usbat_flash_transport; break; } return 0; } /* * Read the media capacity */ static int usbat_flash_get_sector_count(struct us_data *us, struct usbat_info *info) { unsigned char registers[3] = { USBAT_ATA_SECCNT, USBAT_ATA_DEVICE, USBAT_ATA_CMD, }; unsigned char command[3] = { 0x01, 0xA0, 0xEC }; unsigned char *reply; unsigned char status; int rc; if (!us || !info) return USB_STOR_TRANSPORT_ERROR; reply = kmalloc(512, GFP_NOIO); if (!reply) return USB_STOR_TRANSPORT_ERROR; /* ATA command : IDENTIFY DEVICE */ rc = usbat_multiple_write(us, registers, command, 3); if (rc != USB_STOR_XFER_GOOD) { US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); rc = USB_STOR_TRANSPORT_ERROR; goto leave; } /* Read device status */ if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { rc = USB_STOR_TRANSPORT_ERROR; goto leave; } msleep(100); /* Read the device identification data */ rc = usbat_read_block(us, reply, 512, 0); if (rc != USB_STOR_TRANSPORT_GOOD) goto leave; info->sectors = ((u32)(reply[117]) << 24) | ((u32)(reply[116]) << 16) | ((u32)(reply[115]) << 8) | ((u32)(reply[114]) ); rc = USB_STOR_TRANSPORT_GOOD; leave: kfree(reply); return rc; } /* * Read data from device */ static int usbat_flash_read_data(struct us_data *us, struct usbat_info *info, u32 sector, u32 sectors) { unsigned char registers[7] = { USBAT_ATA_FEATURES, USBAT_ATA_SECCNT, USBAT_ATA_SECNUM, USBAT_ATA_LBA_ME, USBAT_ATA_LBA_HI, USBAT_ATA_DEVICE, USBAT_ATA_STATUS, }; unsigned char command[7]; unsigned char *buffer; unsigned char thistime; unsigned int totallen, alloclen; int len, result; unsigned int sg_idx = 0, sg_offset = 0; result = usbat_flash_check_media(us, info); if (result != USB_STOR_TRANSPORT_GOOD) return result; /* * we're working in LBA mode. according to the ATA spec, * we can support up to 28-bit addressing. I don't know if Jumpshot * supports beyond 24-bit addressing. It's kind of hard to test * since it requires > 8GB CF card. */ if (sector > 0x0FFFFFFF) return USB_STOR_TRANSPORT_ERROR; totallen = sectors * info->ssize; /* * Since we don't read more than 64 KB at a time, we have to create * a bounce buffer and move the data a piece at a time between the * bounce buffer and the actual transfer buffer. */ alloclen = min(totallen, 65536u); buffer = kmalloc(alloclen, GFP_NOIO); if (buffer == NULL) return USB_STOR_TRANSPORT_ERROR; do { /* * loop, never allocate or transfer more than 64k at once * (min(128k, 255*info->ssize) is the real limit) */ len = min(totallen, alloclen); thistime = (len / info->ssize) & 0xff; /* ATA command 0x20 (READ SECTORS) */ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20); /* Write/execute ATA read command */ result = usbat_multiple_write(us, registers, command, 7); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; /* Read the data we just requested */ result = usbat_read_blocks(us, buffer, len, 0); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, &sg_idx, &sg_offset, TO_XFER_BUF); sector += thistime; totallen -= len; } while (totallen > 0); kfree(buffer); return USB_STOR_TRANSPORT_GOOD; leave: kfree(buffer); return USB_STOR_TRANSPORT_ERROR; } /* * Write data to device */ static int usbat_flash_write_data(struct us_data *us, struct usbat_info *info, u32 sector, u32 sectors) { unsigned char registers[7] = { USBAT_ATA_FEATURES, USBAT_ATA_SECCNT, USBAT_ATA_SECNUM, USBAT_ATA_LBA_ME, USBAT_ATA_LBA_HI, USBAT_ATA_DEVICE, USBAT_ATA_STATUS, }; unsigned char command[7]; unsigned char *buffer; unsigned char thistime; unsigned int totallen, alloclen; int len, result; unsigned int sg_idx = 0, sg_offset = 0; result = usbat_flash_check_media(us, info); if (result != USB_STOR_TRANSPORT_GOOD) return result; /* * we're working in LBA mode. according to the ATA spec, * we can support up to 28-bit addressing. I don't know if the device * supports beyond 24-bit addressing. It's kind of hard to test * since it requires > 8GB media. */ if (sector > 0x0FFFFFFF) return USB_STOR_TRANSPORT_ERROR; totallen = sectors * info->ssize; /* * Since we don't write more than 64 KB at a time, we have to create * a bounce buffer and move the data a piece at a time between the * bounce buffer and the actual transfer buffer. */ alloclen = min(totallen, 65536u); buffer = kmalloc(alloclen, GFP_NOIO); if (buffer == NULL) return USB_STOR_TRANSPORT_ERROR; do { /* * loop, never allocate or transfer more than 64k at once * (min(128k, 255*info->ssize) is the real limit) */ len = min(totallen, alloclen); thistime = (len / info->ssize) & 0xff; /* Get the data from the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, &sg_idx, &sg_offset, FROM_XFER_BUF); /* ATA command 0x30 (WRITE SECTORS) */ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30); /* Write/execute ATA write command */ result = usbat_multiple_write(us, registers, command, 7); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; /* Write the data */ result = usbat_write_blocks(us, buffer, len, 0); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; sector += thistime; totallen -= len; } while (totallen > 0); kfree(buffer); return result; leave: kfree(buffer); return USB_STOR_TRANSPORT_ERROR; } /* * Squeeze a potentially huge (> 65535 byte) read10 command into * a little ( <= 65535 byte) ATAPI pipe */ static int usbat_hp8200e_handle_read10(struct us_data *us, unsigned char *registers, unsigned char *data, struct scsi_cmnd *srb) { int result = USB_STOR_TRANSPORT_GOOD; unsigned char *buffer; unsigned int len; unsigned int sector; unsigned int sg_segment = 0; unsigned int sg_offset = 0; US_DEBUGP("handle_read10: transfersize %d\n", srb->transfersize); if (srb->request_bufflen < 0x10000) { result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, registers, data, 19, USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), DMA_FROM_DEVICE, srb->request_buffer, srb->request_bufflen, srb->use_sg, 1); return result; } /* * Since we're requesting more data than we can handle in * a single read command (max is 64k-1), we will perform * multiple reads, but each read must be in multiples of * a sector. Luckily the sector size is in srb->transfersize * (see linux/drivers/scsi/sr.c). */ if (data[7+0] == GPCMD_READ_CD) { len = short_pack(data[7+9], data[7+8]); len <<= 16; len |= data[7+7]; US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len); srb->transfersize = srb->request_bufflen/len; } if (!srb->transfersize) { srb->transfersize = 2048; /* A guess */ US_DEBUGP("handle_read10: transfersize 0, forcing %d\n", srb->transfersize); } /* * Since we only read in one block at a time, we have to create * a bounce buffer and move the data a piece at a time between the * bounce buffer and the actual transfer buffer. */ len = (65535/srb->transfersize) * srb->transfersize; US_DEBUGP("Max read is %d bytes\n", len); len = min(len, srb->request_bufflen); buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) /* bloody hell! */ return USB_STOR_TRANSPORT_FAILED; sector = short_pack(data[7+3], data[7+2]); sector <<= 16; sector |= short_pack(data[7+5], data[7+4]); transferred = 0; sg_segment = 0; /* for keeping track of where we are in */ sg_offset = 0; /* the scatter/gather list */ while (transferred != srb->request_bufflen) { if (len > srb->request_bufflen - transferred) len = srb->request_bufflen - transferred; data[3] = len&0xFF; /* (cylL) = expected length (L) */ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ /* Fix up the SCSI command sector and num sectors */ data[7+2] = MSB_of(sector>>16); /* SCSI command sector */ data[7+3] = LSB_of(sector>>16); data[7+4] = MSB_of(sector&0xFFFF); data[7+5] = LSB_of(sector&0xFFFF); if (data[7+0] == GPCMD_READ_CD) data[7+6] = 0; data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */ data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, registers, data, 19, USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), DMA_FROM_DEVICE, buffer, len, 0, 1); if (result != USB_STOR_TRANSPORT_GOOD) break; /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, srb, &sg_segment, &sg_offset, TO_XFER_BUF); /* Update the amount transferred and the sector number */ transferred += len; sector += len / srb->transfersize; } /* while transferred != srb->request_bufflen */ kfree(buffer); return result; } static int usbat_select_and_test_registers(struct us_data *us) { int selector; unsigned char *status = us->iobuf; /* try device = master, then device = slave. */ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) { if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; } return USB_STOR_TRANSPORT_GOOD; } /* * Initialize the USBAT processor and the storage device */ static int init_usbat(struct us_data *us, int devicetype) { int rc; struct usbat_info *info; unsigned char subcountH = USBAT_ATA_LBA_HI; unsigned char subcountL = USBAT_ATA_LBA_ME; unsigned char *status = us->iobuf; us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO); if (!us->extra) { US_DEBUGP("init_usbat: Gah! Can't allocate storage for usbat info struct!\n"); return 1; } info = (struct usbat_info *) (us->extra); /* Enable peripheral control signals */ rc = usbat_write_user_io(us, USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_EPAD | USBAT_UIO_1); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("INIT 1\n"); msleep(2000); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; US_DEBUGP("INIT 2\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("INIT 3\n"); rc = usbat_select_and_test_registers(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; US_DEBUGP("INIT 4\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("INIT 5\n"); /* Enable peripheral control signals and card detect */ rc = usbat_device_enable_cdt(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; US_DEBUGP("INIT 6\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("INIT 7\n"); msleep(1400); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("INIT 8\n"); rc = usbat_select_and_test_registers(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; US_DEBUGP("INIT 9\n"); /* At this point, we need to detect which device we are using */ if (usbat_set_transport(us, info, devicetype)) return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("INIT 10\n"); if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { subcountH = 0x02; subcountL = 0x00; } rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1), 0x00, 0x88, 0x08, subcountH, subcountL); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("INIT 11\n"); return USB_STOR_TRANSPORT_GOOD; } /* * Transport for the HP 8200e */ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) { int result; unsigned char *status = us->iobuf; unsigned char registers[32]; unsigned char data[32]; unsigned int len; int i; char string[64]; len = srb->request_bufflen; /* Send A0 (ATA PACKET COMMAND). Note: I guess we're never going to get any of the ATA commands... just ATA Packet Commands. */ registers[0] = USBAT_ATA_FEATURES; registers[1] = USBAT_ATA_SECCNT; registers[2] = USBAT_ATA_SECNUM; registers[3] = USBAT_ATA_LBA_ME; registers[4] = USBAT_ATA_LBA_HI; registers[5] = USBAT_ATA_DEVICE; registers[6] = USBAT_ATA_CMD; data[0] = 0x00; data[1] = 0x00; data[2] = 0x00; data[3] = len&0xFF; /* (cylL) = expected length (L) */ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ data[5] = 0xB0; /* (device sel) = slave */ data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */ for (i=7; i<19; i++) { registers[i] = 0x10; data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7]; } result = usbat_get_status(us, status); US_DEBUGP("Status = %02X\n", *status); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (srb->cmnd[0] == TEST_UNIT_READY) transferred = 0; if (srb->sc_data_direction == DMA_TO_DEVICE) { result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, registers, data, 19, USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), DMA_TO_DEVICE, srb->request_buffer, len, srb->use_sg, 10); if (result == USB_STOR_TRANSPORT_GOOD) { transferred += len; US_DEBUGP("Wrote %08X bytes\n", transferred); } return result; } else if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == GPCMD_READ_CD) { return usbat_hp8200e_handle_read10(us, registers, data, srb); } if (len > 0xFFFF) { US_DEBUGP("Error: len = %08X... what do I do now?\n", len); return USB_STOR_TRANSPORT_ERROR; } if ( (result = usbat_multiple_write(us, registers, data, 7)) != USB_STOR_TRANSPORT_GOOD) { return result; } /* * Write the 12-byte command header. * * If the command is BLANK then set the timer for 75 minutes. * Otherwise set it for 10 minutes. * * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW * AT SPEED 4 IS UNRELIABLE!!! */ if ((result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12, (srb->cmnd[0]==GPCMD_BLANK ? 75 : 10), 0) != USB_STOR_TRANSPORT_GOOD)) { return result; } /* If there is response data to be read in then do it here. */ if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { /* How many bytes to read in? Check cylL register */ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != USB_STOR_XFER_GOOD) { return USB_STOR_TRANSPORT_ERROR; } if (len > 0xFF) { /* need to read cylH also */ len = *status; if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != USB_STOR_XFER_GOOD) { return USB_STOR_TRANSPORT_ERROR; } len += ((unsigned int) *status)<<8; } else len = *status; result = usbat_read_block(us, srb->request_buffer, len, srb->use_sg); /* Debug-print the first 32 bytes of the transfer */ if (!srb->use_sg) { string[0] = 0; for (i=0; i<len && i<32; i++) { sprintf(string+strlen(string), "%02X ", ((unsigned char *)srb->request_buffer)[i]); if ((i%16)==15) { US_DEBUGP("%s\n", string); string[0] = 0; } } if (string[0]!=0) US_DEBUGP("%s\n", string); } } return result; } /* * Transport for USBAT02-based CompactFlash and similar storage devices */ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) { int rc; struct usbat_info *info = (struct usbat_info *) (us->extra); unsigned long block, blocks; unsigned char *ptr = us->iobuf; static unsigned char inquiry_response[36] = { 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 }; if (srb->cmnd[0] == INQUIRY) { US_DEBUGP("usbat_flash_transport: INQUIRY. Returning bogus response.\n"); memcpy(ptr, inquiry_response, sizeof(inquiry_response)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; } if (srb->cmnd[0] == READ_CAPACITY) { rc = usbat_flash_check_media(us, info); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; rc = usbat_flash_get_sector_count(us, info); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; /* hard coded 512 byte sectors as per ATA spec */ info->ssize = 0x200; US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", info->sectors, info->ssize); /* * build the reply * note: must return the sector number of the last sector, * *not* the total number of sectors */ ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); usb_stor_set_xfer_buf(ptr, 8, srb); return USB_STOR_TRANSPORT_GOOD; } if (srb->cmnd[0] == MODE_SELECT_10) { US_DEBUGP("usbat_flash_transport: Gah! MODE_SELECT_10.\n"); return USB_STOR_TRANSPORT_ERROR; } if (srb->cmnd[0] == READ_10) { block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); US_DEBUGP("usbat_flash_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); return usbat_flash_read_data(us, info, block, blocks); } if (srb->cmnd[0] == READ_12) { /* * I don't think we'll ever see a READ_12 but support it anyway */ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); US_DEBUGP("usbat_flash_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); return usbat_flash_read_data(us, info, block, blocks); } if (srb->cmnd[0] == WRITE_10) { block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); US_DEBUGP("usbat_flash_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); return usbat_flash_write_data(us, info, block, blocks); } if (srb->cmnd[0] == WRITE_12) { /* * I don't think we'll ever see a WRITE_12 but support it anyway */ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); US_DEBUGP("usbat_flash_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); return usbat_flash_write_data(us, info, block, blocks); } if (srb->cmnd[0] == TEST_UNIT_READY) { US_DEBUGP("usbat_flash_transport: TEST_UNIT_READY.\n"); rc = usbat_flash_check_media(us, info); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; return usbat_check_status(us); } if (srb->cmnd[0] == REQUEST_SENSE) { US_DEBUGP("usbat_flash_transport: REQUEST_SENSE.\n"); memset(ptr, 0, 18); ptr[0] = 0xF0; ptr[2] = info->sense_key; ptr[7] = 11; ptr[12] = info->sense_asc; ptr[13] = info->sense_ascq; usb_stor_set_xfer_buf(ptr, 18, srb); return USB_STOR_TRANSPORT_GOOD; } if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { /* * sure. whatever. not like we can stop the user from popping * the media out of the device (no locking doors, etc) */ return USB_STOR_TRANSPORT_GOOD; } US_DEBUGP("usbat_flash_transport: Gah! Unknown command: %d (0x%x)\n", srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; return USB_STOR_TRANSPORT_FAILED; } int init_usbat_cd(struct us_data *us) { return init_usbat(us, USBAT_DEV_HP8200); } int init_usbat_flash(struct us_data *us) { return init_usbat(us, USBAT_DEV_FLASH); } int init_usbat_probe(struct us_data *us) { return init_usbat(us, 0); } /* * Default transport function. Attempts to detect which transport function * should be called, makes it the new default, and calls it. * * This function should never be called. Our usbat_init() function detects the * device type and changes the us->transport ptr to the transport function * relevant to the device. * However, we'll support this impossible(?) case anyway. */ int usbat_transport(struct scsi_cmnd *srb, struct us_data *us) { struct usbat_info *info = (struct usbat_info*) (us->extra); if (usbat_set_transport(us, info, 0)) return USB_STOR_TRANSPORT_ERROR; return us->transport(srb, us); }