/* * linux/drivers/video/cyber2000fb.h * * Copyright (C) 1998-2000 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Integraphics Cyber2000 frame buffer device */ #include <linux/config.h> /* * Internal CyberPro sizes and offsets. */ #define MMIO_OFFSET 0x00800000 #define MMIO_SIZE 0x000c0000 #define NR_PALETTE 256 #if defined(DEBUG) && defined(CONFIG_DEBUG_LL) static void debug_printf(char *fmt, ...) { extern void printascii(const char *); char buffer[128]; va_list ap; va_start(ap, fmt); vsprintf(buffer, fmt, ap); va_end(ap); printascii(buffer); } #else #define debug_printf(x...) do { } while (0) #endif #define RAMDAC_RAMPWRDN 0x01 #define RAMDAC_DAC8BIT 0x02 #define RAMDAC_VREFEN 0x04 #define RAMDAC_BYPASS 0x10 #define RAMDAC_DACPWRDN 0x40 #define EXT_CRT_VRTOFL 0x11 #define EXT_CRT_VRTOFL_LINECOMP10 0x10 #define EXT_CRT_VRTOFL_INTERLACE 0x20 #define EXT_CRT_IRQ 0x12 #define EXT_CRT_IRQ_ENABLE 0x01 #define EXT_CRT_IRQ_ACT_HIGH 0x04 #define EXT_CRT_TEST 0x13 #define EXT_SYNC_CTL 0x16 #define EXT_SYNC_CTL_HS_NORMAL 0x00 #define EXT_SYNC_CTL_HS_0 0x01 #define EXT_SYNC_CTL_HS_1 0x02 #define EXT_SYNC_CTL_HS_HSVS 0x03 #define EXT_SYNC_CTL_VS_NORMAL 0x00 #define EXT_SYNC_CTL_VS_0 0x04 #define EXT_SYNC_CTL_VS_1 0x08 #define EXT_SYNC_CTL_VS_COMP 0x0c #define EXT_BUS_CTL 0x30 #define EXT_BUS_CTL_LIN_1MB 0x00 #define EXT_BUS_CTL_LIN_2MB 0x01 #define EXT_BUS_CTL_LIN_4MB 0x02 #define EXT_BUS_CTL_ZEROWAIT 0x04 #define EXT_BUS_CTL_PCIBURST_WRITE 0x20 #define EXT_BUS_CTL_PCIBURST_READ 0x80 /* CyberPro 5000 only */ #define EXT_SEG_WRITE_PTR 0x31 #define EXT_SEG_READ_PTR 0x32 #define EXT_BIU_MISC 0x33 #define EXT_BIU_MISC_LIN_ENABLE 0x01 #define EXT_BIU_MISC_COP_ENABLE 0x04 #define EXT_BIU_MISC_COP_BFC 0x08 #define EXT_FUNC_CTL 0x3c #define EXT_FUNC_CTL_EXTREGENBL 0x80 /* enable access to 0xbcxxx */ #define PCI_BM_CTL 0x3e #define PCI_BM_CTL_ENABLE 0x01 /* enable bus-master */ #define PCI_BM_CTL_BURST 0x02 /* enable burst */ #define PCI_BM_CTL_BACK2BACK 0x04 /* enable back to back */ #define PCI_BM_CTL_DUMMY 0x08 /* insert dummy cycle */ #define X_V2_VID_MEM_START 0x40 #define X_V2_VID_SRC_WIDTH 0x43 #define X_V2_X_START 0x45 #define X_V2_X_END 0x47 #define X_V2_Y_START 0x49 #define X_V2_Y_END 0x4b #define X_V2_VID_SRC_WIN_WIDTH 0x4d #define Y_V2_DDA_X_INC 0x43 #define Y_V2_DDA_Y_INC 0x47 #define Y_V2_VID_FIFO_CTL 0x49 #define Y_V2_VID_FMT 0x4b #define Y_V2_VID_DISP_CTL1 0x4c #define Y_V2_VID_FIFO_CTL1 0x4d #define J_X2_VID_MEM_START 0x40 #define J_X2_VID_SRC_WIDTH 0x43 #define J_X2_X_START 0x47 #define J_X2_X_END 0x49 #define J_X2_Y_START 0x4b #define J_X2_Y_END 0x4d #define J_X2_VID_SRC_WIN_WIDTH 0x4f #define K_X2_DDA_X_INIT 0x40 #define K_X2_DDA_X_INC 0x42 #define K_X2_DDA_Y_INIT 0x44 #define K_X2_DDA_Y_INC 0x46 #define K_X2_VID_FMT 0x48 #define K_X2_VID_DISP_CTL1 0x49 #define K_CAP_X2_CTL1 0x49 #define CURS_H_START 0x50 #define CURS_H_PRESET 0x52 #define CURS_V_START 0x53 #define CURS_V_PRESET 0x55 #define CURS_CTL 0x56 #define EXT_ATTRIB_CTL 0x57 #define EXT_ATTRIB_CTL_EXT 0x01 #define EXT_OVERSCAN_RED 0x58 #define EXT_OVERSCAN_GREEN 0x59 #define EXT_OVERSCAN_BLUE 0x5a #define CAP_X_START 0x60 #define CAP_X_END 0x62 #define CAP_Y_START 0x64 #define CAP_Y_END 0x66 #define CAP_DDA_X_INIT 0x68 #define CAP_DDA_X_INC 0x6a #define CAP_DDA_Y_INIT 0x6c #define CAP_DDA_Y_INC 0x6e #define EXT_MEM_CTL0 0x70 #define EXT_MEM_CTL0_7CLK 0x01 #define EXT_MEM_CTL0_RAS_1 0x02 #define EXT_MEM_CTL0_RAS2CAS_1 0x04 #define EXT_MEM_CTL0_MULTCAS 0x08 #define EXT_MEM_CTL0_ASYM 0x10 #define EXT_MEM_CTL0_CAS1ON 0x20 #define EXT_MEM_CTL0_FIFOFLUSH 0x40 #define EXT_MEM_CTL0_SEQRESET 0x80 #define EXT_MEM_CTL1 0x71 #define EXT_MEM_CTL1_PAR 0x00 #define EXT_MEM_CTL1_SERPAR 0x01 #define EXT_MEM_CTL1_SER 0x03 #define EXT_MEM_CTL1_SYNC 0x04 #define EXT_MEM_CTL1_VRAM 0x08 #define EXT_MEM_CTL1_4K_REFRESH 0x10 #define EXT_MEM_CTL1_256Kx4 0x00 #define EXT_MEM_CTL1_512Kx8 0x40 #define EXT_MEM_CTL1_1Mx16 0x60 #define EXT_MEM_CTL2 0x72 #define MEM_CTL2_SIZE_1MB 0x00 #define MEM_CTL2_SIZE_2MB 0x01 #define MEM_CTL2_SIZE_4MB 0x02 #define MEM_CTL2_SIZE_MASK 0x03 #define MEM_CTL2_64BIT 0x04 #define EXT_HIDDEN_CTL1 0x73 #define EXT_FIFO_CTL 0x74 #define EXT_SEQ_MISC 0x77 #define EXT_SEQ_MISC_8 0x01 #define EXT_SEQ_MISC_16_RGB565 0x02 #define EXT_SEQ_MISC_32 0x03 #define EXT_SEQ_MISC_24_RGB888 0x04 #define EXT_SEQ_MISC_16_RGB555 0x06 #define EXT_SEQ_MISC_8_RGB332 0x09 #define EXT_SEQ_MISC_16_RGB444 0x0a #define EXT_HIDDEN_CTL4 0x7a #define CURS_MEM_START 0x7e /* bits 23..12 */ #define CAP_PIP_X_START 0x80 #define CAP_PIP_X_END 0x82 #define CAP_PIP_Y_START 0x84 #define CAP_PIP_Y_END 0x86 #define EXT_CAP_CTL1 0x88 #define EXT_CAP_CTL2 0x89 #define EXT_CAP_CTL2_ODDFRAMEIRQ 0x01 #define EXT_CAP_CTL2_ANYFRAMEIRQ 0x02 #define BM_CTRL0 0x9c #define BM_CTRL1 0x9d #define EXT_CAP_MODE1 0xa4 #define EXT_CAP_MODE1_8BIT 0x01 /* enable 8bit capture mode */ #define EXT_CAP_MODE1_CCIR656 0x02 /* CCIR656 mode */ #define EXT_CAP_MODE1_IGNOREVGT 0x04 /* ignore VGT */ #define EXT_CAP_MODE1_ALTFIFO 0x10 /* use alternate FIFO for capture */ #define EXT_CAP_MODE1_SWAPUV 0x20 /* swap UV bytes */ #define EXT_CAP_MODE1_MIRRORY 0x40 /* mirror vertically */ #define EXT_CAP_MODE1_MIRRORX 0x80 /* mirror horizontally */ #define EXT_CAP_MODE2 0xa5 #define EXT_CAP_MODE2_CCIRINVOE 0x01 #define EXT_CAP_MODE2_CCIRINVVGT 0x02 #define EXT_CAP_MODE2_CCIRINVHGT 0x04 #define EXT_CAP_MODE2_CCIRINVDG 0x08 #define EXT_CAP_MODE2_DATEND 0x10 #define EXT_CAP_MODE2_CCIRDGH 0x20 #define EXT_CAP_MODE2_FIXSONY 0x40 #define EXT_CAP_MODE2_SYNCFREEZE 0x80 #define EXT_TV_CTL 0xae #define EXT_DCLK_MULT 0xb0 #define EXT_DCLK_DIV 0xb1 #define EXT_DCLK_DIV_VFSEL 0x20 #define EXT_MCLK_MULT 0xb2 #define EXT_MCLK_DIV 0xb3 #define EXT_LATCH1 0xb5 #define EXT_LATCH1_VAFC_EN 0x01 /* enable VAFC */ #define EXT_FEATURE 0xb7 #define EXT_FEATURE_BUS_MASK 0x07 /* host bus mask */ #define EXT_FEATURE_BUS_PCI 0x00 #define EXT_FEATURE_BUS_VL_STD 0x04 #define EXT_FEATURE_BUS_VL_LINEAR 0x05 #define EXT_FEATURE_1682 0x20 /* IGS 1682 compatibility */ #define EXT_LATCH2 0xb6 #define EXT_LATCH2_I2C_CLKEN 0x10 #define EXT_LATCH2_I2C_CLK 0x20 #define EXT_LATCH2_I2C_DATEN 0x40 #define EXT_LATCH2_I2C_DAT 0x80 #define EXT_XT_CTL 0xbe #define EXT_XT_CAP16 0x04 #define EXT_XT_LINEARFB 0x08 #define EXT_XT_PAL 0x10 #define EXT_MEM_START 0xc0 /* ext start address 21 bits */ #define HOR_PHASE_SHIFT 0xc2 /* high 3 bits */ #define EXT_SRC_WIDTH 0xc3 /* ext offset phase 10 bits */ #define EXT_SRC_HEIGHT 0xc4 /* high 6 bits */ #define EXT_X_START 0xc5 /* ext->screen, 16 bits */ #define EXT_X_END 0xc7 /* ext->screen, 16 bits */ #define EXT_Y_START 0xc9 /* ext->screen, 16 bits */ #define EXT_Y_END 0xcb /* ext->screen, 16 bits */ #define EXT_SRC_WIN_WIDTH 0xcd /* 8 bits */ #define EXT_COLOUR_COMPARE 0xce /* 24 bits */ #define EXT_DDA_X_INIT 0xd1 /* ext->screen 16 bits */ #define EXT_DDA_X_INC 0xd3 /* ext->screen 16 bits */ #define EXT_DDA_Y_INIT 0xd5 /* ext->screen 16 bits */ #define EXT_DDA_Y_INC 0xd7 /* ext->screen 16 bits */ #define EXT_VID_FIFO_CTL 0xd9 #define EXT_VID_FMT 0xdb #define EXT_VID_FMT_YUV422 0x00 /* formats - does this cause conversion? */ #define EXT_VID_FMT_RGB555 0x01 #define EXT_VID_FMT_RGB565 0x02 #define EXT_VID_FMT_RGB888_24 0x03 #define EXT_VID_FMT_RGB888_32 0x04 #define EXT_VID_FMT_RGB8 0x05 #define EXT_VID_FMT_RGB4444 0x06 #define EXT_VID_FMT_RGB8T 0x07 #define EXT_VID_FMT_DUP_PIX_ZOON 0x08 /* duplicate pixel zoom */ #define EXT_VID_FMT_MOD_3RD_PIX 0x20 /* modify 3rd duplicated pixel */ #define EXT_VID_FMT_DBL_H_PIX 0x40 /* double horiz pixels */ #define EXT_VID_FMT_YUV128 0x80 /* YUV data offset by 128 */ #define EXT_VID_DISP_CTL1 0xdc #define EXT_VID_DISP_CTL1_INTRAM 0x01 /* video pixels go to internal RAM */ #define EXT_VID_DISP_CTL1_IGNORE_CCOMP 0x02 /* ignore colour compare registers */ #define EXT_VID_DISP_CTL1_NOCLIP 0x04 /* do not clip to 16235,16240 */ #define EXT_VID_DISP_CTL1_UV_AVG 0x08 /* U/V data is averaged */ #define EXT_VID_DISP_CTL1_Y128 0x10 /* Y data offset by 128 (if YUV128 set) */ #define EXT_VID_DISP_CTL1_VINTERPOL_OFF 0x20 /* disable vertical interpolation */ #define EXT_VID_DISP_CTL1_FULL_WIN 0x40 /* video out window full */ #define EXT_VID_DISP_CTL1_ENABLE_WINDOW 0x80 /* enable video window */ #define EXT_VID_FIFO_CTL1 0xdd #define EXT_VID_FIFO_CTL1_OE_HIGH 0x02 #define EXT_VID_FIFO_CTL1_INTERLEAVE 0x04 /* enable interleaved memory read */ #define EXT_ROM_UCB4GH 0xe5 #define EXT_ROM_UCB4GH_FREEZE 0x02 /* capture frozen */ #define EXT_ROM_UCB4GH_ODDFRAME 0x04 /* 1 = odd frame captured */ #define EXT_ROM_UCB4GH_1HL 0x08 /* first horizonal line after VGT falling edge */ #define EXT_ROM_UCB4GH_ODD 0x10 /* odd frame indicator */ #define EXT_ROM_UCB4GH_INTSTAT 0x20 /* video interrupt */ #define VFAC_CTL1 0xe8 #define VFAC_CTL1_CAPTURE 0x01 /* capture enable (only when VSYNC high)*/ #define VFAC_CTL1_VFAC_ENABLE 0x02 /* vfac enable */ #define VFAC_CTL1_FREEZE_CAPTURE 0x04 /* freeze capture */ #define VFAC_CTL1_FREEZE_CAPTURE_SYNC 0x08 /* sync freeze capture */ #define VFAC_CTL1_VALIDFRAME_SRC 0x10 /* select valid frame source */ #define VFAC_CTL1_PHILIPS 0x40 /* select Philips mode */ #define VFAC_CTL1_MODVINTERPOLCLK 0x80 /* modify vertical interpolation clocl */ #define VFAC_CTL2 0xe9 #define VFAC_CTL2_INVERT_VIDDATAVALID 0x01 /* invert video data valid */ #define VFAC_CTL2_INVERT_GRAPHREADY 0x02 /* invert graphic ready output sig */ #define VFAC_CTL2_INVERT_DATACLK 0x04 /* invert data clock signal */ #define VFAC_CTL2_INVERT_HSYNC 0x08 /* invert hsync input */ #define VFAC_CTL2_INVERT_VSYNC 0x10 /* invert vsync input */ #define VFAC_CTL2_INVERT_FRAME 0x20 /* invert frame odd/even input */ #define VFAC_CTL2_INVERT_BLANK 0x40 /* invert blank output */ #define VFAC_CTL2_INVERT_OVSYNC 0x80 /* invert other vsync input */ #define VFAC_CTL3 0xea #define VFAC_CTL3_CAP_LARGE_FIFO 0x01 /* large capture fifo */ #define VFAC_CTL3_CAP_INTERLACE 0x02 /* capture odd and even fields */ #define VFAC_CTL3_CAP_HOLD_4NS 0x00 /* hold capture data for 4ns */ #define VFAC_CTL3_CAP_HOLD_2NS 0x04 /* hold capture data for 2ns */ #define VFAC_CTL3_CAP_HOLD_6NS 0x08 /* hold capture data for 6ns */ #define VFAC_CTL3_CAP_HOLD_0NS 0x0c /* hold capture data for 0ns */ #define VFAC_CTL3_CHROMAKEY 0x20 /* capture data will be chromakeyed */ #define VFAC_CTL3_CAP_IRQ 0x40 /* enable capture interrupt */ #define CAP_MEM_START 0xeb /* 18 bits */ #define CAP_MAP_WIDTH 0xed /* high 6 bits */ #define CAP_PITCH 0xee /* 8 bits */ #define CAP_CTL_MISC 0xef #define CAP_CTL_MISC_HDIV 0x01 #define CAP_CTL_MISC_HDIV4 0x02 #define CAP_CTL_MISC_ODDEVEN 0x04 #define CAP_CTL_MISC_HSYNCDIV2 0x08 #define CAP_CTL_MISC_SYNCTZHIGH 0x10 #define CAP_CTL_MISC_SYNCTZOR 0x20 #define CAP_CTL_MISC_DISPUSED 0x80 #define REG_BANK 0xfa #define REG_BANK_X 0x00 #define REG_BANK_Y 0x01 #define REG_BANK_W 0x02 #define REG_BANK_T 0x03 #define REG_BANK_J 0x04 #define REG_BANK_K 0x05 /* * Bus-master */ #define BM_VID_ADDR_LOW 0xbc040 #define BM_VID_ADDR_HIGH 0xbc044 #define BM_ADDRESS_LOW 0xbc080 #define BM_ADDRESS_HIGH 0xbc084 #define BM_LENGTH 0xbc088 #define BM_CONTROL 0xbc08c #define BM_CONTROL_ENABLE 0x01 /* enable transfer */ #define BM_CONTROL_IRQEN 0x02 /* enable IRQ at end of transfer */ #define BM_CONTROL_INIT 0x04 /* initialise status & count */ #define BM_COUNT 0xbc090 /* read-only */ /* * TV registers */ #define TV_VBLANK_EVEN_START 0xbe43c #define TV_VBLANK_EVEN_END 0xbe440 #define TV_VBLANK_ODD_START 0xbe444 #define TV_VBLANK_ODD_END 0xbe448 #define TV_SYNC_YGAIN 0xbe44c #define TV_UV_GAIN 0xbe450 #define TV_PED_UVDET 0xbe454 #define TV_UV_BURST_AMP 0xbe458 #define TV_HSYNC_START 0xbe45c #define TV_HSYNC_END 0xbe460 #define TV_Y_DELAY1 0xbe464 #define TV_Y_DELAY2 0xbe468 #define TV_UV_DELAY1 0xbe46c #define TV_BURST_START 0xbe470 #define TV_BURST_END 0xbe474 #define TV_HBLANK_START 0xbe478 #define TV_HBLANK_END 0xbe47c #define TV_PED_EVEN_START 0xbe480 #define TV_PED_EVEN_END 0xbe484 #define TV_PED_ODD_START 0xbe488 #define TV_PED_ODD_END 0xbe48c #define TV_VSYNC_EVEN_START 0xbe490 #define TV_VSYNC_EVEN_END 0xbe494 #define TV_VSYNC_ODD_START 0xbe498 #define TV_VSYNC_ODD_END 0xbe49c #define TV_SCFL 0xbe4a0 #define TV_SCFH 0xbe4a4 #define TV_SCP 0xbe4a8 #define TV_DELAYBYPASS 0xbe4b4 #define TV_EQL_END 0xbe4bc #define TV_SERR_START 0xbe4c0 #define TV_SERR_END 0xbe4c4 #define TV_CTL 0xbe4dc /* reflects a previous register- MVFCLR, MVPCLR etc P241*/ #define TV_VSYNC_VGA_HS 0xbe4e8 #define TV_FLICK_XMIN 0xbe514 #define TV_FLICK_XMAX 0xbe518 #define TV_FLICK_YMIN 0xbe51c #define TV_FLICK_YMAX 0xbe520 /* * Graphics Co-processor */ #define CO_REG_CONTROL 0xbf011 #define CO_CTRL_BUSY 0x80 #define CO_CTRL_CMDFULL 0x04 #define CO_CTRL_FIFOEMPTY 0x02 #define CO_CTRL_READY 0x01 #define CO_REG_SRC_WIDTH 0xbf018 #define CO_REG_PIXFMT 0xbf01c #define CO_PIXFMT_32BPP 0x03 #define CO_PIXFMT_24BPP 0x02 #define CO_PIXFMT_16BPP 0x01 #define CO_PIXFMT_8BPP 0x00 #define CO_REG_FGMIX 0xbf048 #define CO_FG_MIX_ZERO 0x00 #define CO_FG_MIX_SRC_AND_DST 0x01 #define CO_FG_MIX_SRC_AND_NDST 0x02 #define CO_FG_MIX_SRC 0x03 #define CO_FG_MIX_NSRC_AND_DST 0x04 #define CO_FG_MIX_DST 0x05 #define CO_FG_MIX_SRC_XOR_DST 0x06 #define CO_FG_MIX_SRC_OR_DST 0x07 #define CO_FG_MIX_NSRC_AND_NDST 0x08 #define CO_FG_MIX_SRC_XOR_NDST 0x09 #define CO_FG_MIX_NDST 0x0a #define CO_FG_MIX_SRC_OR_NDST 0x0b #define CO_FG_MIX_NSRC 0x0c #define CO_FG_MIX_NSRC_OR_DST 0x0d #define CO_FG_MIX_NSRC_OR_NDST 0x0e #define CO_FG_MIX_ONES 0x0f #define CO_REG_FGCOLOUR 0xbf058 #define CO_REG_BGCOLOUR 0xbf05c #define CO_REG_PIXWIDTH 0xbf060 #define CO_REG_PIXHEIGHT 0xbf062 #define CO_REG_X_PHASE 0xbf078 #define CO_REG_CMD_L 0xbf07c #define CO_CMD_L_PATTERN_FGCOL 0x8000 #define CO_CMD_L_INC_LEFT 0x0004 #define CO_CMD_L_INC_UP 0x0002 #define CO_REG_CMD_H 0xbf07e #define CO_CMD_H_BGSRCMAP 0x8000 /* otherwise bg colour */ #define CO_CMD_H_FGSRCMAP 0x2000 /* otherwise fg colour */ #define CO_CMD_H_BLITTER 0x0800 #define CO_REG_SRC1_PTR 0xbf170 #define CO_REG_SRC2_PTR 0xbf174 #define CO_REG_DEST_PTR 0xbf178 #define CO_REG_DEST_WIDTH 0xbf218 /* * Private structure */ struct cfb_info; struct cyberpro_info { struct pci_dev *dev; unsigned char __iomem *regs; char __iomem *fb; char dev_name[32]; unsigned int fb_size; unsigned int chip_id; /* * The following is a pointer to be passed into the * functions below. The modules outside the main * cyber2000fb.c driver have no knowledge as to what * is within this structure. */ struct cfb_info *info; /* * Use these to enable the BM or TV registers. In an SMP * environment, these two function pointers should only be * called from the module_init() or module_exit() * functions. */ void (*enable_extregs)(struct cfb_info *); void (*disable_extregs)(struct cfb_info *); }; #define ID_IGA_1682 0 #define ID_CYBERPRO_2000 1 #define ID_CYBERPRO_2010 2 #define ID_CYBERPRO_5000 3 struct fb_var_screeninfo; /* * Note! Writing to the Cyber20x0 registers from an interrupt * routine is definitely a bad idea atm. */ int cyber2000fb_attach(struct cyberpro_info *info, int idx); void cyber2000fb_detach(int idx); void cyber2000fb_enable_extregs(struct cfb_info *cfb); void cyber2000fb_disable_extregs(struct cfb_info *cfb); void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var);