/* drivers/video/pvr2fb.c * * Frame buffer and fbcon support for the NEC PowerVR2 found within the Sega * Dreamcast. * * Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org> * Copyright (c) 2001, 2002, 2003, 2004, 2005 Paul Mundt <lethal@linux-sh.org> * * This file is part of the LinuxDC project (linuxdc.sourceforge.net). * */ /* * This driver is mostly based on the excellent amifb and vfb sources. It uses * an odd scheme for converting hardware values to/from framebuffer values, * here are some hacked-up formulas: * * The Dreamcast has screen offsets from each side of its four borders and * the start offsets of the display window. I used these values to calculate * 'pseudo' values (think of them as placeholders) for the fb video mode, so * that when it came time to convert these values back into their hardware * values, I could just add mode- specific offsets to get the correct mode * settings: * * left_margin = diwstart_h - borderstart_h; * right_margin = borderstop_h - (diwstart_h + xres); * upper_margin = diwstart_v - borderstart_v; * lower_margin = borderstop_v - (diwstart_h + yres); * * hsync_len = borderstart_h + (hsync_total - borderstop_h); * vsync_len = borderstart_v + (vsync_total - borderstop_v); * * Then, when it's time to convert back to hardware settings, the only * constants are the borderstart_* offsets, all other values are derived from * the fb video mode: * * // PAL * borderstart_h = 116; * borderstart_v = 44; * ... * borderstop_h = borderstart_h + hsync_total - hsync_len; * ... * diwstart_v = borderstart_v - upper_margin; * * However, in the current implementation, the borderstart values haven't had * the benefit of being fully researched, so some modes may be broken. */ #undef DEBUG #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/pci.h> #ifdef CONFIG_SH_DREAMCAST #include <asm/machvec.h> #include <asm/mach/sysasic.h> #endif #ifdef CONFIG_SH_DMA #include <linux/pagemap.h> #include <asm/mach/dma.h> #include <asm/dma.h> #endif #ifdef CONFIG_SH_STORE_QUEUES #include <linux/uaccess.h> #include <asm/cpu/sq.h> #endif #ifndef PCI_DEVICE_ID_NEC_NEON250 # define PCI_DEVICE_ID_NEC_NEON250 0x0067 #endif /* 2D video registers */ #define DISP_BASE par->mmio_base #define DISP_BRDRCOLR (DISP_BASE + 0x40) #define DISP_DIWMODE (DISP_BASE + 0x44) #define DISP_DIWADDRL (DISP_BASE + 0x50) #define DISP_DIWADDRS (DISP_BASE + 0x54) #define DISP_DIWSIZE (DISP_BASE + 0x5c) #define DISP_SYNCCONF (DISP_BASE + 0xd0) #define DISP_BRDRHORZ (DISP_BASE + 0xd4) #define DISP_SYNCSIZE (DISP_BASE + 0xd8) #define DISP_BRDRVERT (DISP_BASE + 0xdc) #define DISP_DIWCONF (DISP_BASE + 0xe8) #define DISP_DIWHSTRT (DISP_BASE + 0xec) #define DISP_DIWVSTRT (DISP_BASE + 0xf0) #define DISP_PIXDEPTH (DISP_BASE + 0x108) /* Pixel clocks, one for TV output, doubled for VGA output */ #define TV_CLK 74239 #define VGA_CLK 37119 /* This is for 60Hz - the VTOTAL is doubled for interlaced modes */ #define PAL_HTOTAL 863 #define PAL_VTOTAL 312 #define NTSC_HTOTAL 857 #define NTSC_VTOTAL 262 /* Supported cable types */ enum { CT_VGA, CT_NONE, CT_RGB, CT_COMPOSITE }; /* Supported video output types */ enum { VO_PAL, VO_NTSC, VO_VGA }; /* Supported palette types */ enum { PAL_ARGB1555, PAL_RGB565, PAL_ARGB4444, PAL_ARGB8888 }; struct pvr2_params { unsigned int val; char *name; }; static struct pvr2_params cables[] __devinitdata = { { CT_VGA, "VGA" }, { CT_RGB, "RGB" }, { CT_COMPOSITE, "COMPOSITE" }, }; static struct pvr2_params outputs[] __devinitdata = { { VO_PAL, "PAL" }, { VO_NTSC, "NTSC" }, { VO_VGA, "VGA" }, }; /* * This describes the current video mode */ static struct pvr2fb_par { unsigned int hsync_total; /* Clocks/line */ unsigned int vsync_total; /* Lines/field */ unsigned int borderstart_h; unsigned int borderstop_h; unsigned int borderstart_v; unsigned int borderstop_v; unsigned int diwstart_h; /* Horizontal offset of the display field */ unsigned int diwstart_v; /* Vertical offset of the display field, for interlaced modes, this is the long field */ unsigned long disp_start; /* Address of image within VRAM */ unsigned char is_interlaced; /* Is the display interlaced? */ unsigned char is_doublescan; /* Are scanlines output twice? (doublescan) */ unsigned char is_lowres; /* Is horizontal pixel-doubling enabled? */ unsigned long mmio_base; /* MMIO base */ u32 palette[16]; } *currentpar; static struct fb_info *fb_info; static struct fb_fix_screeninfo pvr2_fix __devinitdata = { .id = "NEC PowerVR2", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_TRUECOLOR, .ypanstep = 1, .ywrapstep = 1, .accel = FB_ACCEL_NONE, }; static struct fb_var_screeninfo pvr2_var __devinitdata = { .xres = 640, .yres = 480, .xres_virtual = 640, .yres_virtual = 480, .bits_per_pixel =16, .red = { 11, 5, 0 }, .green = { 5, 6, 0 }, .blue = { 0, 5, 0 }, .activate = FB_ACTIVATE_NOW, .height = -1, .width = -1, .vmode = FB_VMODE_NONINTERLACED, }; static int cable_type = CT_VGA; static int video_output = VO_VGA; static int nopan = 0; static int nowrap = 1; /* * We do all updating, blanking, etc. during the vertical retrace period */ static unsigned int do_vmode_full = 0; /* Change the video mode */ static unsigned int do_vmode_pan = 0; /* Update the video mode */ static short do_blank = 0; /* (Un)Blank the screen */ static unsigned int is_blanked = 0; /* Is the screen blanked? */ #ifdef CONFIG_SH_STORE_QUEUES static unsigned long pvr2fb_map; #endif #ifdef CONFIG_SH_DMA static unsigned int shdma = PVR2_CASCADE_CHAN; static unsigned int pvr2dma = ONCHIP_NR_DMA_CHANNELS; #endif static int pvr2fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, unsigned int blue, unsigned int transp, struct fb_info *info); static int pvr2fb_blank(int blank, struct fb_info *info); static unsigned long get_line_length(int xres_virtual, int bpp); static void set_color_bitfields(struct fb_var_screeninfo *var); static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); static int pvr2fb_set_par(struct fb_info *info); static void pvr2_update_display(struct fb_info *info); static void pvr2_init_display(struct fb_info *info); static void pvr2_do_blank(void); static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id); static int pvr2_init_cable(void); static int pvr2_get_param(const struct pvr2_params *p, const char *s, int val, int size); #ifdef CONFIG_SH_DMA static ssize_t pvr2fb_write(struct fb_info *info, const char *buf, size_t count, loff_t *ppos); #endif static struct fb_ops pvr2fb_ops = { .owner = THIS_MODULE, .fb_setcolreg = pvr2fb_setcolreg, .fb_blank = pvr2fb_blank, .fb_check_var = pvr2fb_check_var, .fb_set_par = pvr2fb_set_par, #ifdef CONFIG_SH_DMA .fb_write = pvr2fb_write, #endif .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, }; static struct fb_videomode pvr2_modedb[] __devinitdata = { /* * Broadcast video modes (PAL and NTSC). I'm unfamiliar with * PAL-M and PAL-N, but from what I've read both modes parallel PAL and * NTSC, so it shouldn't be a problem (I hope). */ { /* 640x480 @ 60Hz interlaced (NTSC) */ "ntsc_640x480i", 60, 640, 480, TV_CLK, 38, 33, 0, 18, 146, 26, FB_SYNC_BROADCAST, FB_VMODE_INTERLACED | FB_VMODE_YWRAP }, { /* 640x240 @ 60Hz (NTSC) */ /* XXX: Broken! Don't use... */ "ntsc_640x240", 60, 640, 240, TV_CLK, 38, 33, 0, 0, 146, 22, FB_SYNC_BROADCAST, FB_VMODE_YWRAP }, { /* 640x480 @ 60hz (VGA) */ "vga_640x480", 60, 640, 480, VGA_CLK, 38, 33, 0, 18, 146, 26, 0, FB_VMODE_YWRAP }, }; #define NUM_TOTAL_MODES ARRAY_SIZE(pvr2_modedb) #define DEFMODE_NTSC 0 #define DEFMODE_PAL 0 #define DEFMODE_VGA 2 static int defmode = DEFMODE_NTSC; static char *mode_option __devinitdata = NULL; static inline void pvr2fb_set_pal_type(unsigned int type) { struct pvr2fb_par *par = (struct pvr2fb_par *)fb_info->par; fb_writel(type, par->mmio_base + 0x108); } static inline void pvr2fb_set_pal_entry(struct pvr2fb_par *par, unsigned int regno, unsigned int val) { fb_writel(val, par->mmio_base + 0x1000 + (4 * regno)); } static int pvr2fb_blank(int blank, struct fb_info *info) { do_blank = blank ? blank : -1; return 0; } static inline unsigned long get_line_length(int xres_virtual, int bpp) { return (unsigned long)((((xres_virtual*bpp)+31)&~31) >> 3); } static void set_color_bitfields(struct fb_var_screeninfo *var) { switch (var->bits_per_pixel) { case 16: /* RGB 565 */ pvr2fb_set_pal_type(PAL_RGB565); var->red.offset = 11; var->red.length = 5; var->green.offset = 5; var->green.length = 6; var->blue.offset = 0; var->blue.length = 5; var->transp.offset = 0; var->transp.length = 0; break; case 24: /* RGB 888 */ var->red.offset = 16; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.offset = 0; var->blue.length = 8; var->transp.offset = 0; var->transp.length = 0; break; case 32: /* ARGB 8888 */ pvr2fb_set_pal_type(PAL_ARGB8888); var->red.offset = 16; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.offset = 0; var->blue.length = 8; var->transp.offset = 24; var->transp.length = 8; break; } } static int pvr2fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, unsigned int blue, unsigned int transp, struct fb_info *info) { struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; unsigned int tmp; if (regno > info->cmap.len) return 1; /* * We only support the hardware palette for 16 and 32bpp. It's also * expected that the palette format has been set by the time we get * here, so we don't waste time setting it again. */ switch (info->var.bits_per_pixel) { case 16: /* RGB 565 */ tmp = (red & 0xf800) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11); pvr2fb_set_pal_entry(par, regno, tmp); break; case 24: /* RGB 888 */ red >>= 8; green >>= 8; blue >>= 8; tmp = (red << 16) | (green << 8) | blue; break; case 32: /* ARGB 8888 */ red >>= 8; green >>= 8; blue >>= 8; tmp = (transp << 24) | (red << 16) | (green << 8) | blue; pvr2fb_set_pal_entry(par, regno, tmp); break; default: pr_debug("Invalid bit depth %d?!?\n", info->var.bits_per_pixel); return 1; } if (regno < 16) ((u32*)(info->pseudo_palette))[regno] = tmp; return 0; } static int pvr2fb_set_par(struct fb_info *info) { struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; struct fb_var_screeninfo *var = &info->var; unsigned long line_length; unsigned int vtotal; /* * XXX: It's possible that a user could use a VGA box, change the cable * type in hardware (i.e. switch from VGA<->composite), then change * modes (i.e. switching to another VT). If that happens we should * automagically change the output format to cope, but currently I * don't have a VGA box to make sure this works properly. */ cable_type = pvr2_init_cable(); if (cable_type == CT_VGA && video_output != VO_VGA) video_output = VO_VGA; var->vmode &= FB_VMODE_MASK; if (var->vmode & FB_VMODE_INTERLACED && video_output != VO_VGA) par->is_interlaced = 1; /* * XXX: Need to be more creative with this (i.e. allow doublecan for * PAL/NTSC output). */ if (var->vmode & FB_VMODE_DOUBLE && video_output == VO_VGA) par->is_doublescan = 1; par->hsync_total = var->left_margin + var->xres + var->right_margin + var->hsync_len; par->vsync_total = var->upper_margin + var->yres + var->lower_margin + var->vsync_len; if (var->sync & FB_SYNC_BROADCAST) { vtotal = par->vsync_total; if (par->is_interlaced) vtotal /= 2; if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) { /* XXX: Check for start values here... */ /* XXX: Check hardware for PAL-compatibility */ par->borderstart_h = 116; par->borderstart_v = 44; } else { /* NTSC video output */ par->borderstart_h = 126; par->borderstart_v = 18; } } else { /* VGA mode */ /* XXX: What else needs to be checked? */ /* * XXX: We have a little freedom in VGA modes, what ranges * should be here (i.e. hsync/vsync totals, etc.)? */ par->borderstart_h = 126; par->borderstart_v = 40; } /* Calculate the remainding offsets */ par->diwstart_h = par->borderstart_h + var->left_margin; par->diwstart_v = par->borderstart_v + var->upper_margin; par->borderstop_h = par->diwstart_h + var->xres + var->right_margin; par->borderstop_v = par->diwstart_v + var->yres + var->lower_margin; if (!par->is_interlaced) par->borderstop_v /= 2; if (info->var.xres < 640) par->is_lowres = 1; line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); par->disp_start = info->fix.smem_start + (line_length * var->yoffset) * line_length; info->fix.line_length = line_length; return 0; } static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; unsigned int vtotal, hsync_total; unsigned long line_length; if (var->pixclock != TV_CLK && var->pixclock != VGA_CLK) { pr_debug("Invalid pixclock value %d\n", var->pixclock); return -EINVAL; } if (var->xres < 320) var->xres = 320; if (var->yres < 240) var->yres = 240; if (var->xres_virtual < var->xres) var->xres_virtual = var->xres; if (var->yres_virtual < var->yres) var->yres_virtual = var->yres; if (var->bits_per_pixel <= 16) var->bits_per_pixel = 16; else if (var->bits_per_pixel <= 24) var->bits_per_pixel = 24; else if (var->bits_per_pixel <= 32) var->bits_per_pixel = 32; set_color_bitfields(var); if (var->vmode & FB_VMODE_YWRAP) { if (var->xoffset || var->yoffset < 0 || var->yoffset >= var->yres_virtual) { var->xoffset = var->yoffset = 0; } else { if (var->xoffset > var->xres_virtual - var->xres || var->yoffset > var->yres_virtual - var->yres || var->xoffset < 0 || var->yoffset < 0) var->xoffset = var->yoffset = 0; } } else { var->xoffset = var->yoffset = 0; } /* * XXX: Need to be more creative with this (i.e. allow doublecan for * PAL/NTSC output). */ if (var->yres < 480 && video_output == VO_VGA) var->vmode |= FB_VMODE_DOUBLE; if (video_output != VO_VGA) { var->sync |= FB_SYNC_BROADCAST; var->vmode |= FB_VMODE_INTERLACED; } else { var->sync &= ~FB_SYNC_BROADCAST; var->vmode &= ~FB_VMODE_INTERLACED; var->vmode |= pvr2_var.vmode; } if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_TEST) { var->right_margin = par->borderstop_h - (par->diwstart_h + var->xres); var->left_margin = par->diwstart_h - par->borderstart_h; var->hsync_len = par->borderstart_h + (par->hsync_total - par->borderstop_h); var->upper_margin = par->diwstart_v - par->borderstart_v; var->lower_margin = par->borderstop_v - (par->diwstart_v + var->yres); var->vsync_len = par->borderstop_v + (par->vsync_total - par->borderstop_v); } hsync_total = var->left_margin + var->xres + var->right_margin + var->hsync_len; vtotal = var->upper_margin + var->yres + var->lower_margin + var->vsync_len; if (var->sync & FB_SYNC_BROADCAST) { if (var->vmode & FB_VMODE_INTERLACED) vtotal /= 2; if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) { /* PAL video output */ /* XXX: Should be using a range here ... ? */ if (hsync_total != PAL_HTOTAL) { pr_debug("invalid hsync total for PAL\n"); return -EINVAL; } } else { /* NTSC video output */ if (hsync_total != NTSC_HTOTAL) { pr_debug("invalid hsync total for NTSC\n"); return -EINVAL; } } } /* Check memory sizes */ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); if (line_length * var->yres_virtual > info->fix.smem_len) return -ENOMEM; return 0; } static void pvr2_update_display(struct fb_info *info) { struct pvr2fb_par *par = (struct pvr2fb_par *) info->par; struct fb_var_screeninfo *var = &info->var; /* Update the start address of the display image */ fb_writel(par->disp_start, DISP_DIWADDRL); fb_writel(par->disp_start + get_line_length(var->xoffset+var->xres, var->bits_per_pixel), DISP_DIWADDRS); } /* * Initialize the video mode. Currently, the 16bpp and 24bpp modes aren't * very stable. It's probably due to the fact that a lot of the 2D video * registers are still undocumented. */ static void pvr2_init_display(struct fb_info *info) { struct pvr2fb_par *par = (struct pvr2fb_par *) info->par; struct fb_var_screeninfo *var = &info->var; unsigned int diw_height, diw_width, diw_modulo = 1; unsigned int bytesperpixel = var->bits_per_pixel >> 3; /* hsync and vsync totals */ fb_writel((par->vsync_total << 16) | par->hsync_total, DISP_SYNCSIZE); /* column height, modulo, row width */ /* since we're "panning" within vram, we need to offset things based * on the offset from the virtual x start to our real gfx. */ if (video_output != VO_VGA && par->is_interlaced) diw_modulo += info->fix.line_length / 4; diw_height = (par->is_interlaced ? var->yres / 2 : var->yres); diw_width = get_line_length(var->xres, var->bits_per_pixel) / 4; fb_writel((diw_modulo << 20) | (--diw_height << 10) | --diw_width, DISP_DIWSIZE); /* display address, long and short fields */ fb_writel(par->disp_start, DISP_DIWADDRL); fb_writel(par->disp_start + get_line_length(var->xoffset+var->xres, var->bits_per_pixel), DISP_DIWADDRS); /* border horizontal, border vertical, border color */ fb_writel((par->borderstart_h << 16) | par->borderstop_h, DISP_BRDRHORZ); fb_writel((par->borderstart_v << 16) | par->borderstop_v, DISP_BRDRVERT); fb_writel(0, DISP_BRDRCOLR); /* display window start position */ fb_writel(par->diwstart_h, DISP_DIWHSTRT); fb_writel((par->diwstart_v << 16) | par->diwstart_v, DISP_DIWVSTRT); /* misc. settings */ fb_writel((0x16 << 16) | par->is_lowres, DISP_DIWCONF); /* clock doubler (for VGA), scan doubler, display enable */ fb_writel(((video_output == VO_VGA) << 23) | (par->is_doublescan << 1) | 1, DISP_DIWMODE); /* bits per pixel */ fb_writel(fb_readl(DISP_DIWMODE) | (--bytesperpixel << 2), DISP_DIWMODE); fb_writel(bytesperpixel << 2, DISP_PIXDEPTH); /* video enable, color sync, interlace, * hsync and vsync polarity (currently unused) */ fb_writel(0x100 | ((par->is_interlaced /*|4*/) << 4), DISP_SYNCCONF); } /* Simulate blanking by making the border cover the entire screen */ #define BLANK_BIT (1<<3) static void pvr2_do_blank(void) { struct pvr2fb_par *par = currentpar; unsigned long diwconf; diwconf = fb_readl(DISP_DIWCONF); if (do_blank > 0) fb_writel(diwconf | BLANK_BIT, DISP_DIWCONF); else fb_writel(diwconf & ~BLANK_BIT, DISP_DIWCONF); is_blanked = do_blank > 0 ? do_blank : 0; } static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id) { struct fb_info *info = dev_id; if (do_vmode_pan || do_vmode_full) pvr2_update_display(info); if (do_vmode_full) pvr2_init_display(info); if (do_vmode_pan) do_vmode_pan = 0; if (do_vmode_full) do_vmode_full = 0; if (do_blank) { pvr2_do_blank(); do_blank = 0; } return IRQ_HANDLED; } /* * Determine the cable type and initialize the cable output format. Don't do * anything if the cable type has been overidden (via "cable:XX"). */ #define PCTRA 0xff80002c #define PDTRA 0xff800030 #define VOUTC 0xa0702c00 static int pvr2_init_cable(void) { if (cable_type < 0) { fb_writel((fb_readl(PCTRA) & 0xfff0ffff) | 0x000a0000, PCTRA); cable_type = (fb_readw(PDTRA) >> 8) & 3; } /* Now select the output format (either composite or other) */ /* XXX: Save the previous val first, as this reg is also AICA related */ if (cable_type == CT_COMPOSITE) fb_writel(3 << 8, VOUTC); else if (cable_type == CT_RGB) fb_writel(1 << 9, VOUTC); else fb_writel(0, VOUTC); return cable_type; } #ifdef CONFIG_SH_DMA static ssize_t pvr2fb_write(struct fb_info *info, const char *buf, size_t count, loff_t *ppos) { unsigned long dst, start, end, len; unsigned int nr_pages; struct page **pages; int ret, i; nr_pages = (count + PAGE_SIZE - 1) >> PAGE_SHIFT; pages = kmalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); if (!pages) return -ENOMEM; down_read(¤t->mm->mmap_sem); ret = get_user_pages(current, current->mm, (unsigned long)buf, nr_pages, WRITE, 0, pages, NULL); up_read(¤t->mm->mmap_sem); if (ret < nr_pages) { nr_pages = ret; ret = -EINVAL; goto out_unmap; } dma_configure_channel(shdma, 0x12c1); dst = (unsigned long)fb_info->screen_base + *ppos; start = (unsigned long)page_address(pages[0]); end = (unsigned long)page_address(pages[nr_pages]); len = nr_pages << PAGE_SHIFT; /* Half-assed contig check */ if (start + len == end) { /* As we do this in one shot, it's either all or nothing.. */ if ((*ppos + len) > fb_info->fix.smem_len) { ret = -ENOSPC; goto out_unmap; } dma_write(shdma, start, 0, len); dma_write(pvr2dma, 0, dst, len); dma_wait_for_completion(pvr2dma); goto out; } /* Not contiguous, writeout per-page instead.. */ for (i = 0; i < nr_pages; i++, dst += PAGE_SIZE) { if ((*ppos + (i << PAGE_SHIFT)) > fb_info->fix.smem_len) { ret = -ENOSPC; goto out_unmap; } dma_write_page(shdma, (unsigned long)page_address(pages[i]), 0); dma_write_page(pvr2dma, 0, dst); dma_wait_for_completion(pvr2dma); } out: *ppos += count; ret = count; out_unmap: for (i = 0; i < nr_pages; i++) page_cache_release(pages[i]); kfree(pages); return ret; } #endif /* CONFIG_SH_DMA */ /** * pvr2fb_common_init * * Common init code for the PVR2 chips. * * This mostly takes care of the common aspects of the fb setup and * registration. It's expected that the board-specific init code has * already setup pvr2_fix with something meaningful at this point. * * Device info reporting is also done here, as well as picking a sane * default from the modedb. For board-specific modelines, simply define * a per-board modedb. * * Also worth noting is that the cable and video output types are likely * always going to be VGA for the PCI-based PVR2 boards, but we leave this * in for flexibility anyways. Who knows, maybe someone has tv-out on a * PCI-based version of these things ;-) */ static int __devinit pvr2fb_common_init(void) { struct pvr2fb_par *par = currentpar; unsigned long modememused, rev; fb_info->screen_base = ioremap_nocache(pvr2_fix.smem_start, pvr2_fix.smem_len); if (!fb_info->screen_base) { printk(KERN_ERR "pvr2fb: Failed to remap smem space\n"); goto out_err; } par->mmio_base = (unsigned long)ioremap_nocache(pvr2_fix.mmio_start, pvr2_fix.mmio_len); if (!par->mmio_base) { printk(KERN_ERR "pvr2fb: Failed to remap mmio space\n"); goto out_err; } fb_memset(fb_info->screen_base, 0, pvr2_fix.smem_len); pvr2_fix.ypanstep = nopan ? 0 : 1; pvr2_fix.ywrapstep = nowrap ? 0 : 1; fb_info->fbops = &pvr2fb_ops; fb_info->fix = pvr2_fix; fb_info->par = currentpar; fb_info->pseudo_palette = currentpar->palette; fb_info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; if (video_output == VO_VGA) defmode = DEFMODE_VGA; if (!mode_option) mode_option = "640x480@60"; if (!fb_find_mode(&fb_info->var, fb_info, mode_option, pvr2_modedb, NUM_TOTAL_MODES, &pvr2_modedb[defmode], 16)) fb_info->var = pvr2_var; fb_alloc_cmap(&fb_info->cmap, 256, 0); if (register_framebuffer(fb_info) < 0) goto out_err; /*Must write PIXDEPTH to register before anything is displayed - so force init */ pvr2_init_display(fb_info); modememused = get_line_length(fb_info->var.xres_virtual, fb_info->var.bits_per_pixel); modememused *= fb_info->var.yres_virtual; rev = fb_readl(par->mmio_base + 0x04); printk("fb%d: %s (rev %ld.%ld) frame buffer device, using %ldk/%ldk of video memory\n", fb_info->node, fb_info->fix.id, (rev >> 4) & 0x0f, rev & 0x0f, modememused >> 10, (unsigned long)(fb_info->fix.smem_len >> 10)); printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n", fb_info->node, fb_info->var.xres, fb_info->var.yres, fb_info->var.bits_per_pixel, get_line_length(fb_info->var.xres, fb_info->var.bits_per_pixel), (char *)pvr2_get_param(cables, NULL, cable_type, 3), (char *)pvr2_get_param(outputs, NULL, video_output, 3)); #ifdef CONFIG_SH_STORE_QUEUES printk(KERN_NOTICE "fb%d: registering with SQ API\n", fb_info->node); pvr2fb_map = sq_remap(fb_info->fix.smem_start, fb_info->fix.smem_len, fb_info->fix.id, pgprot_val(PAGE_SHARED)); printk(KERN_NOTICE "fb%d: Mapped video memory to SQ addr 0x%lx\n", fb_info->node, pvr2fb_map); #endif return 0; out_err: if (fb_info->screen_base) iounmap(fb_info->screen_base); if (par->mmio_base) iounmap((void *)par->mmio_base); return -ENXIO; } #ifdef CONFIG_SH_DREAMCAST static int __init pvr2fb_dc_init(void) { if (!mach_is_dreamcast()) return -ENXIO; /* Make a guess at the monitor based on the attached cable */ if (pvr2_init_cable() == CT_VGA) { fb_info->monspecs.hfmin = 30000; fb_info->monspecs.hfmax = 70000; fb_info->monspecs.vfmin = 60; fb_info->monspecs.vfmax = 60; } else { /* Not VGA, using a TV (taken from acornfb) */ fb_info->monspecs.hfmin = 15469; fb_info->monspecs.hfmax = 15781; fb_info->monspecs.vfmin = 49; fb_info->monspecs.vfmax = 51; } /* * XXX: This needs to pull default video output via BIOS or other means */ if (video_output < 0) { if (cable_type == CT_VGA) { video_output = VO_VGA; } else { video_output = VO_NTSC; } } /* * Nothing exciting about the DC PVR2 .. only a measly 8MiB. */ pvr2_fix.smem_start = 0xa5000000; /* RAM starts here */ pvr2_fix.smem_len = 8 << 20; pvr2_fix.mmio_start = 0xa05f8000; /* registers start here */ pvr2_fix.mmio_len = 0x2000; if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, IRQF_SHARED, "pvr2 VBL handler", fb_info)) { return -EBUSY; } #ifdef CONFIG_SH_DMA if (request_dma(pvr2dma, "pvr2") != 0) { free_irq(HW_EVENT_VSYNC, 0); return -EBUSY; } #endif return pvr2fb_common_init(); } static void __exit pvr2fb_dc_exit(void) { if (fb_info->screen_base) { iounmap(fb_info->screen_base); fb_info->screen_base = NULL; } if (currentpar->mmio_base) { iounmap((void *)currentpar->mmio_base); currentpar->mmio_base = 0; } free_irq(HW_EVENT_VSYNC, 0); #ifdef CONFIG_SH_DMA free_dma(pvr2dma); #endif } #endif /* CONFIG_SH_DREAMCAST */ #ifdef CONFIG_PCI static int __devinit pvr2fb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret; ret = pci_enable_device(pdev); if (ret) { printk(KERN_ERR "pvr2fb: PCI enable failed\n"); return ret; } ret = pci_request_regions(pdev, "pvr2fb"); if (ret) { printk(KERN_ERR "pvr2fb: PCI request regions failed\n"); return ret; } /* * Slightly more exciting than the DC PVR2 .. 16MiB! */ pvr2_fix.smem_start = pci_resource_start(pdev, 0); pvr2_fix.smem_len = pci_resource_len(pdev, 0); pvr2_fix.mmio_start = pci_resource_start(pdev, 1); pvr2_fix.mmio_len = pci_resource_len(pdev, 1); fb_info->device = &pdev->dev; return pvr2fb_common_init(); } static void __devexit pvr2fb_pci_remove(struct pci_dev *pdev) { if (fb_info->screen_base) { iounmap(fb_info->screen_base); fb_info->screen_base = NULL; } if (currentpar->mmio_base) { iounmap((void *)currentpar->mmio_base); currentpar->mmio_base = 0; } pci_release_regions(pdev); } static struct pci_device_id pvr2fb_pci_tbl[] __devinitdata = { { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NEON250, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, pvr2fb_pci_tbl); static struct pci_driver pvr2fb_pci_driver = { .name = "pvr2fb", .id_table = pvr2fb_pci_tbl, .probe = pvr2fb_pci_probe, .remove = __devexit_p(pvr2fb_pci_remove), }; static int __init pvr2fb_pci_init(void) { return pci_register_driver(&pvr2fb_pci_driver); } static void __exit pvr2fb_pci_exit(void) { pci_unregister_driver(&pvr2fb_pci_driver); } #endif /* CONFIG_PCI */ static int __devinit pvr2_get_param(const struct pvr2_params *p, const char *s, int val, int size) { int i; for (i = 0 ; i < size ; i++ ) { if (s != NULL) { if (!strnicmp(p[i].name, s, strlen(s))) return p[i].val; } else { if (p[i].val == val) return (int)p[i].name; } } return -1; } /* * Parse command arguments. Supported arguments are: * inverse Use inverse color maps * cable:composite|rgb|vga Override the video cable type * output:NTSC|PAL|VGA Override the video output format * * <xres>x<yres>[-<bpp>][@<refresh>] or, * <name>[-<bpp>][@<refresh>] Startup using this video mode */ #ifndef MODULE static int __init pvr2fb_setup(char *options) { char *this_opt; char cable_arg[80]; char output_arg[80]; if (!options || !*options) return 0; while ((this_opt = strsep(&options, ","))) { if (!*this_opt) continue; if (!strcmp(this_opt, "inverse")) { fb_invert_cmaps(); } else if (!strncmp(this_opt, "cable:", 6)) { strcpy(cable_arg, this_opt + 6); } else if (!strncmp(this_opt, "output:", 7)) { strcpy(output_arg, this_opt + 7); } else if (!strncmp(this_opt, "nopan", 5)) { nopan = 1; } else if (!strncmp(this_opt, "nowrap", 6)) { nowrap = 1; } else { mode_option = this_opt; } } if (*cable_arg) cable_type = pvr2_get_param(cables, cable_arg, 0, 3); if (*output_arg) video_output = pvr2_get_param(outputs, output_arg, 0, 3); return 0; } #endif static struct pvr2_board { int (*init)(void); void (*exit)(void); char name[16]; } board_driver[] = { #ifdef CONFIG_SH_DREAMCAST { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, #endif #ifdef CONFIG_PCI { pvr2fb_pci_init, pvr2fb_pci_exit, "PCI PVR2" }, #endif { 0, }, }; static int __init pvr2fb_init(void) { int i, ret = -ENODEV; int size; #ifndef MODULE char *option = NULL; if (fb_get_options("pvr2fb", &option)) return -ENODEV; pvr2fb_setup(option); #endif size = sizeof(struct fb_info) + sizeof(struct pvr2fb_par) + 16 * sizeof(u32); fb_info = framebuffer_alloc(sizeof(struct pvr2fb_par), NULL); if (!fb_info) { printk(KERN_ERR "Failed to allocate memory for fb_info\n"); return -ENOMEM; } currentpar = fb_info->par; for (i = 0; i < ARRAY_SIZE(board_driver); i++) { struct pvr2_board *pvr_board = board_driver + i; if (!pvr_board->init) continue; ret = pvr_board->init(); if (ret != 0) { printk(KERN_ERR "pvr2fb: Failed init of %s device\n", pvr_board->name); framebuffer_release(fb_info); break; } } return ret; } static void __exit pvr2fb_exit(void) { int i; for (i = 0; i < ARRAY_SIZE(board_driver); i++) { struct pvr2_board *pvr_board = board_driver + i; if (pvr_board->exit) pvr_board->exit(); } #ifdef CONFIG_SH_STORE_QUEUES sq_unmap(pvr2fb_map); #endif unregister_framebuffer(fb_info); framebuffer_release(fb_info); } module_init(pvr2fb_init); module_exit(pvr2fb_exit); MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>"); MODULE_DESCRIPTION("Framebuffer driver for NEC PowerVR 2 based graphics boards"); MODULE_LICENSE("GPL");