/* * linux/drivers/video/sstfb.c -- voodoo graphics frame buffer * * Copyright (c) 2000-2002 Ghozlane Toumi <gtoumi@laposte.net> * * Created 15 Jan 2000 by Ghozlane Toumi * * Contributions (and many thanks) : * * 03/2001 James Simmons <jsimmons@infradead.org> * 04/2001 Paul Mundt <lethal@chaoticdreams.org> * 05/2001 Urs Ganse <ursg@uni.de> * (initial work on voodoo2 port, interlace) * 09/2002 Helge Deller <deller@gmx.de> * (enable driver on big-endian machines (hppa), ioctl fixes) * 12/2002 Helge Deller <deller@gmx.de> * (port driver to new frambuffer infrastructure) * 01/2003 Helge Deller <deller@gmx.de> * (initial work on fb hardware acceleration for voodoo2) * 08/2006 Alan Cox <alan@redhat.com> * Remove never finished and bogus 24/32bit support * Clean up macro abuse * Minor tidying for format. * 12/2006 Helge Deller <deller@gmx.de> * add /sys/class/graphics/fbX/vgapass sysfs-interface * add module option "mode_option" to set initial screen mode * use fbdev default videomode database * remove debug functions from ioctl */ /* * The voodoo1 has the following memory mapped address space: * 0x000000 - 0x3fffff : registers (4MB) * 0x400000 - 0x7fffff : linear frame buffer (4MB) * 0x800000 - 0xffffff : texture memory (8MB) */ /* * misc notes, TODOs, toASKs, and deep thoughts -TODO: at one time or another test that the mode is acceptable by the monitor -ASK: Can I choose different ordering for the color bitfields (rgba argb ...) which one should i use ? is there any preferred one ? It seems ARGB is the one ... -TODO: in set_var check the validity of timings (hsync vsync)... -TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via a nop command. so it's ok as long as the commands we pass don't go through the fifo. warning: issuing a nop command seems to need pci_fifo -FIXME: in case of failure in the init sequence, be sure we return to a safe state. - FIXME: Use accelerator for 2D scroll -FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20) */ /* * debug info * SST_DEBUG : enable debugging * SST_DEBUG_REG : debug registers * 0 : no debug * 1 : dac calls, [un]set_bits, FbiInit * 2 : insane debug level (log every register read/write) * SST_DEBUG_FUNC : functions * 0 : no debug * 1 : function call / debug ioctl * 2 : variables * 3 : flood . you don't want to do that. trust me. * SST_DEBUG_VAR : debug display/var structs * 0 : no debug * 1 : dumps display, fb_var * * sstfb specific ioctls: * toggle vga (0x46db) : toggle vga_pass_through */ #undef SST_DEBUG /* * Includes */ #include <linux/string.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/fb.h> #include <linux/pci.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/slab.h> #include <asm/io.h> #include <linux/uaccess.h> #include <video/sstfb.h> /* initialized by setup */ static int vgapass; /* enable VGA passthrough cable */ static int mem; /* mem size in MB, 0 = autodetect */ static int clipping = 1; /* use clipping (slower, safer) */ static int gfxclk; /* force FBI freq in Mhz . Dangerous */ static int slowpci; /* slow PCI settings */ /* Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60 */ #define DEFAULT_VIDEO_MODE "640x480@60" static char *mode_option __devinitdata = DEFAULT_VIDEO_MODE; enum { ID_VOODOO1 = 0, ID_VOODOO2 = 1, }; #define IS_VOODOO2(par) ((par)->type == ID_VOODOO2) static struct sst_spec voodoo_spec[] __devinitdata = { { .name = "Voodoo Graphics", .default_gfx_clock = 50000, .max_gfxclk = 60 }, { .name = "Voodoo2", .default_gfx_clock = 75000, .max_gfxclk = 85 }, }; /* * debug functions */ #if (SST_DEBUG_REG > 0) static void sst_dbg_print_read_reg(u32 reg, u32 val) { const char *regname; switch (reg) { case FBIINIT0: regname = "FbiInit0"; break; case FBIINIT1: regname = "FbiInit1"; break; case FBIINIT2: regname = "FbiInit2"; break; case FBIINIT3: regname = "FbiInit3"; break; case FBIINIT4: regname = "FbiInit4"; break; case FBIINIT5: regname = "FbiInit5"; break; case FBIINIT6: regname = "FbiInit6"; break; default: regname = NULL; break; } if (regname == NULL) r_ddprintk("sst_read(%#x): %#x\n", reg, val); else r_dprintk(" sst_read(%s): %#x\n", regname, val); } static void sst_dbg_print_write_reg(u32 reg, u32 val) { const char *regname; switch (reg) { case FBIINIT0: regname = "FbiInit0"; break; case FBIINIT1: regname = "FbiInit1"; break; case FBIINIT2: regname = "FbiInit2"; break; case FBIINIT3: regname = "FbiInit3"; break; case FBIINIT4: regname = "FbiInit4"; break; case FBIINIT5: regname = "FbiInit5"; break; case FBIINIT6: regname = "FbiInit6"; break; default: regname = NULL; break; } if (regname == NULL) r_ddprintk("sst_write(%#x, %#x)\n", reg, val); else r_dprintk(" sst_write(%s, %#x)\n", regname, val); } #else /* (SST_DEBUG_REG > 0) */ # define sst_dbg_print_read_reg(reg, val) do {} while(0) # define sst_dbg_print_write_reg(reg, val) do {} while(0) #endif /* (SST_DEBUG_REG > 0) */ /* * hardware access functions */ /* register access */ #define sst_read(reg) __sst_read(par->mmio_vbase, reg) #define sst_write(reg,val) __sst_write(par->mmio_vbase, reg, val) #define sst_set_bits(reg,val) __sst_set_bits(par->mmio_vbase, reg, val) #define sst_unset_bits(reg,val) __sst_unset_bits(par->mmio_vbase, reg, val) #define sst_dac_read(reg) __sst_dac_read(par->mmio_vbase, reg) #define sst_dac_write(reg,val) __sst_dac_write(par->mmio_vbase, reg, val) #define dac_i_read(reg) __dac_i_read(par->mmio_vbase, reg) #define dac_i_write(reg,val) __dac_i_write(par->mmio_vbase, reg, val) static inline u32 __sst_read(u8 __iomem *vbase, u32 reg) { u32 ret = readl(vbase + reg); sst_dbg_print_read_reg(reg, ret); return ret; } static inline void __sst_write(u8 __iomem *vbase, u32 reg, u32 val) { sst_dbg_print_write_reg(reg, val); writel(val, vbase + reg); } static inline void __sst_set_bits(u8 __iomem *vbase, u32 reg, u32 val) { r_dprintk("sst_set_bits(%#x, %#x)\n", reg, val); __sst_write(vbase, reg, __sst_read(vbase, reg) | val); } static inline void __sst_unset_bits(u8 __iomem *vbase, u32 reg, u32 val) { r_dprintk("sst_unset_bits(%#x, %#x)\n", reg, val); __sst_write(vbase, reg, __sst_read(vbase, reg) & ~val); } /* * wait for the fbi chip. ASK: what happens if the fbi is stuck ? * * the FBI is supposed to be ready if we receive 5 time * in a row a "idle" answer to our requests */ #define sst_wait_idle() __sst_wait_idle(par->mmio_vbase) static int __sst_wait_idle(u8 __iomem *vbase) { int count = 0; /* if (doFBINOP) __sst_write(vbase, NOPCMD, 0); */ while(1) { if (__sst_read(vbase, STATUS) & STATUS_FBI_BUSY) { f_dddprintk("status: busy\n"); /* FIXME basicaly, this is a busy wait. maybe not that good. oh well; * this is a small loop after all. * Or maybe we should use mdelay() or udelay() here instead ? */ count = 0; } else { count++; f_dddprintk("status: idle(%d)\n", count); } if (count >= 5) return 1; /* XXX do something to avoid hanging the machine if the voodoo is out */ } } /* dac access */ /* dac_read should be remaped to FbiInit2 (via the pci reg init_enable) */ static u8 __sst_dac_read(u8 __iomem *vbase, u8 reg) { u8 ret; reg &= 0x07; __sst_write(vbase, DAC_DATA, ((u32)reg << 8) | DAC_READ_CMD ); __sst_wait_idle(vbase); /* udelay(10); */ ret = __sst_read(vbase, DAC_READ) & 0xff; r_dprintk("sst_dac_read(%#x): %#x\n", reg, ret); return ret; } static void __sst_dac_write(u8 __iomem *vbase, u8 reg, u8 val) { r_dprintk("sst_dac_write(%#x, %#x)\n", reg, val); reg &= 0x07; __sst_write(vbase, DAC_DATA,(((u32)reg << 8)) | (u32)val); __sst_wait_idle(vbase); } /* indexed access to ti/att dacs */ static u32 __dac_i_read(u8 __iomem *vbase, u8 reg) { u32 ret; __sst_dac_write(vbase, DACREG_ADDR_I, reg); ret = __sst_dac_read(vbase, DACREG_DATA_I); r_dprintk("sst_dac_read_i(%#x): %#x\n", reg, ret); return ret; } static void __dac_i_write(u8 __iomem *vbase, u8 reg,u8 val) { r_dprintk("sst_dac_write_i(%#x, %#x)\n", reg, val); __sst_dac_write(vbase, DACREG_ADDR_I, reg); __sst_dac_write(vbase, DACREG_DATA_I, val); } /* compute the m,n,p , returns the real freq * (ics datasheet : N <-> N1 , P <-> N2) * * Fout= Fref * (M+2)/( 2^P * (N+2)) * we try to get close to the asked freq * with P as high, and M as low as possible * range: * ti/att : 0 <= M <= 255; 0 <= P <= 3; 0<= N <= 63 * ics : 1 <= M <= 127; 0 <= P <= 3; 1<= N <= 31 * we'll use the lowest limitation, should be precise enouth */ static int sst_calc_pll(const int freq, int *freq_out, struct pll_timing *t) { int m, m2, n, p, best_err, fout; int best_n = -1; int best_m = -1; best_err = freq; p = 3; /* f * 2^P = vco should be less than VCOmax ~ 250 MHz for ics*/ while (((1 << p) * freq > VCO_MAX) && (p >= 0)) p--; if (p == -1) return -EINVAL; for (n = 1; n < 32; n++) { /* calc 2 * m so we can round it later*/ m2 = (2 * freq * (1 << p) * (n + 2) ) / DAC_FREF - 4 ; m = (m2 % 2 ) ? m2/2+1 : m2/2 ; if (m >= 128) break; fout = (DAC_FREF * (m + 2)) / ((1 << p) * (n + 2)); if ((abs(fout - freq) < best_err) && (m > 0)) { best_n = n; best_m = m; best_err = abs(fout - freq); /* we get the lowest m , allowing 0.5% error in freq*/ if (200*best_err < freq) break; } } if (best_n == -1) /* unlikely, but who knows ? */ return -EINVAL; t->p = p; t->n = best_n; t->m = best_m; *freq_out = (DAC_FREF * (t->m + 2)) / ((1 << t->p) * (t->n + 2)); f_ddprintk ("m: %d, n: %d, p: %d, F: %dKhz\n", t->m, t->n, t->p, *freq_out); return 0; } /* * clear lfb screen */ static void sstfb_clear_screen(struct fb_info *info) { /* clear screen */ fb_memset(info->screen_base, 0, info->fix.smem_len); } /** * sstfb_check_var - Optional function. Validates a var passed in. * @var: frame buffer variable screen structure * @info: frame buffer structure that represents a single frame buffer * * Limit to the abilities of a single chip as SLI is not supported * by this driver. */ static int sstfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct sstfb_par *par = info->par; int hSyncOff = var->xres + var->right_margin + var->left_margin; int vSyncOff = var->yres + var->lower_margin + var->upper_margin; int vBackPorch = var->left_margin, yDim = var->yres; int vSyncOn = var->vsync_len; int tiles_in_X, real_length; unsigned int freq; if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) { printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n", PICOS2KHZ(var->pixclock)); return -EINVAL; } var->pixclock = KHZ2PICOS(freq); if (var->vmode & FB_VMODE_INTERLACED) vBackPorch += (vBackPorch % 2); if (var->vmode & FB_VMODE_DOUBLE) { vBackPorch <<= 1; yDim <<=1; vSyncOn <<=1; vSyncOff <<=1; } switch (var->bits_per_pixel) { case 0 ... 16 : var->bits_per_pixel = 16; break; default : printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel); return -EINVAL; } /* validity tests */ if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1 || hSyncOff <= 1 || var->left_margin <= 2 || vSyncOn <= 0 || vSyncOff <= 0 || vBackPorch <= 0) { return -EINVAL; } if (IS_VOODOO2(par)) { /* Voodoo 2 limits */ tiles_in_X = (var->xres + 63 ) / 64 * 2; if (var->xres > POW2(11) || yDim >= POW2(11)) { printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n", var->xres, var->yres); return -EINVAL; } if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) || var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) || vSyncOff >= POW2(13) || vBackPorch >= POW2(9) || tiles_in_X >= POW2(6) || tiles_in_X <= 0) { printk(KERN_ERR "sstfb: Unsupported timings\n"); return -EINVAL; } } else { /* Voodoo limits */ tiles_in_X = (var->xres + 63 ) / 64; if (var->vmode) { printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n", var->vmode); return -EINVAL; } if (var->xres > POW2(10) || var->yres >= POW2(10)) { printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n", var->xres, var->yres); return -EINVAL; } if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) || var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) || vSyncOff >= POW2(12) || vBackPorch >= POW2(8) || tiles_in_X >= POW2(4) || tiles_in_X <= 0) { printk(KERN_ERR "sstfb: Unsupported timings\n"); return -EINVAL; } } /* it seems that the fbi uses tiles of 64x16 pixels to "map" the mem */ /* FIXME: i don't like this... looks wrong */ real_length = tiles_in_X * (IS_VOODOO2(par) ? 32 : 64 ) * ((var->bits_per_pixel == 16) ? 2 : 4); if (real_length * yDim > info->fix.smem_len) { printk(KERN_ERR "sstfb: Not enough video memory\n"); return -ENOMEM; } var->sync &= (FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT); var->vmode &= (FB_VMODE_INTERLACED | FB_VMODE_DOUBLE); var->xoffset = 0; var->yoffset = 0; var->height = -1; var->width = -1; /* * correct the color bit fields */ /* var->{red|green|blue}.msb_right = 0; */ switch (var->bits_per_pixel) { case 16: /* RGB 565 LfbMode 0 */ var->red.length = 5; var->green.length = 6; var->blue.length = 5; var->transp.length = 0; var->red.offset = 11; var->green.offset = 5; var->blue.offset = 0; var->transp.offset = 0; break; default: return -EINVAL; } return 0; } /** * sstfb_set_par - Optional function. Alters the hardware state. * @info: frame buffer structure that represents a single frame buffer */ static int sstfb_set_par(struct fb_info *info) { struct sstfb_par *par = info->par; u32 lfbmode, fbiinit1, fbiinit2, fbiinit3, fbiinit5, fbiinit6=0; struct pci_dev *sst_dev = par->dev; unsigned int freq; int ntiles; par->hSyncOff = info->var.xres + info->var.right_margin + info->var.left_margin; par->yDim = info->var.yres; par->vSyncOn = info->var.vsync_len; par->vSyncOff = info->var.yres + info->var.lower_margin + info->var.upper_margin; par->vBackPorch = info->var.upper_margin; /* We need par->pll */ sst_calc_pll(PICOS2KHZ(info->var.pixclock), &freq, &par->pll); if (info->var.vmode & FB_VMODE_INTERLACED) par->vBackPorch += (par->vBackPorch % 2); if (info->var.vmode & FB_VMODE_DOUBLE) { par->vBackPorch <<= 1; par->yDim <<=1; par->vSyncOn <<=1; par->vSyncOff <<=1; } if (IS_VOODOO2(par)) { /* voodoo2 has 32 pixel wide tiles , BUT stange things happen with odd number of tiles */ par->tiles_in_X = (info->var.xres + 63 ) / 64 * 2; } else { /* voodoo1 has 64 pixels wide tiles. */ par->tiles_in_X = (info->var.xres + 63 ) / 64; } f_ddprintk("hsync_len hSyncOff vsync_len vSyncOff\n"); f_ddprintk("%-7d %-8d %-7d %-8d\n", info->var.hsync_len, par->hSyncOff, par->vSyncOn, par->vSyncOff); f_ddprintk("left_margin upper_margin xres yres Freq\n"); f_ddprintk("%-10d %-10d %-4d %-4d %-8ld\n", info->var.left_margin, info->var.upper_margin, info->var.xres, info->var.yres, PICOS2KHZ(info->var.pixclock)); sst_write(NOPCMD, 0); sst_wait_idle(); pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR); sst_set_bits(FBIINIT1, VIDEO_RESET); sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET); sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH); sst_wait_idle(); /*sst_unset_bits (FBIINIT0, FBI_RESET); / reenable FBI ? */ sst_write(BACKPORCH, par->vBackPorch << 16 | (info->var.left_margin - 2)); sst_write(VIDEODIMENSIONS, par->yDim << 16 | (info->var.xres - 1)); sst_write(HSYNC, (par->hSyncOff - 1) << 16 | (info->var.hsync_len - 1)); sst_write(VSYNC, par->vSyncOff << 16 | par->vSyncOn); fbiinit2 = sst_read(FBIINIT2); fbiinit3 = sst_read(FBIINIT3); /* everything is reset. we enable fbiinit2/3 remap : dac acces ok */ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR | PCI_REMAP_DAC ); par->dac_sw.set_vidmod(info, info->var.bits_per_pixel); /* set video clock */ par->dac_sw.set_pll(info, &par->pll, VID_CLOCK); /* disable fbiinit2/3 remap */ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR); /* restore fbiinit2/3 */ sst_write(FBIINIT2,fbiinit2); sst_write(FBIINIT3,fbiinit3); fbiinit1 = (sst_read(FBIINIT1) & VIDEO_MASK) | EN_DATA_OE | EN_BLANK_OE | EN_HVSYNC_OE | EN_DCLK_OE /* | (15 << TILES_IN_X_SHIFT) */ | SEL_INPUT_VCLK_2X /* | (2 << VCLK_2X_SEL_DEL_SHIFT) | (2 << VCLK_DEL_SHIFT) */; /* try with vclk_in_delay =0 (bits 29:30) , vclk_out_delay =0 (bits(27:28) in (near) future set them accordingly to revision + resolution (cf glide) first understand what it stands for :) FIXME: there are some artefacts... check for the vclk_in_delay lets try with 6ns delay in both vclk_out & in... doh... they're still there :\ */ ntiles = par->tiles_in_X; if (IS_VOODOO2(par)) { fbiinit1 |= ((ntiles & 0x20) >> 5) << TILES_IN_X_MSB_SHIFT | ((ntiles & 0x1e) >> 1) << TILES_IN_X_SHIFT; /* as the only value of importance for us in fbiinit6 is tiles in X (lsb), and as reading fbinit 6 will return crap (see FBIINIT6_DEFAULT) we just write our value. BTW due to the dac unable to read odd number of tiles, this field is always null ... */ fbiinit6 = (ntiles & 0x1) << TILES_IN_X_LSB_SHIFT; } else fbiinit1 |= ntiles << TILES_IN_X_SHIFT; switch (info->var.bits_per_pixel) { case 16: fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL; break; default: return -EINVAL; } sst_write(FBIINIT1, fbiinit1); if (IS_VOODOO2(par)) { sst_write(FBIINIT6, fbiinit6); fbiinit5=sst_read(FBIINIT5) & FBIINIT5_MASK ; if (info->var.vmode & FB_VMODE_INTERLACED) fbiinit5 |= INTERLACE; if (info->var.vmode & FB_VMODE_DOUBLE) fbiinit5 |= VDOUBLESCAN; if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) fbiinit5 |= HSYNC_HIGH; if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) fbiinit5 |= VSYNC_HIGH; sst_write(FBIINIT5, fbiinit5); } sst_wait_idle(); sst_unset_bits(FBIINIT1, VIDEO_RESET); sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET); sst_set_bits(FBIINIT2, EN_DRAM_REFRESH); /* disables fbiinit writes */ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR); /* set lfbmode : set mode + front buffer for reads/writes + disable pipeline */ switch (info->var.bits_per_pixel) { case 16: lfbmode = LFB_565; break; default: return -EINVAL; } #if defined(__BIG_ENDIAN) /* Enable byte-swizzle functionality in hardware. * With this enabled, all our read- and write-accesses to * the voodoo framebuffer can be done in native format, and * the hardware will automatically convert it to little-endian. * - tested on HP-PARISC, Helge Deller <deller@gmx.de> */ lfbmode |= ( LFB_WORD_SWIZZLE_WR | LFB_BYTE_SWIZZLE_WR | LFB_WORD_SWIZZLE_RD | LFB_BYTE_SWIZZLE_RD ); #endif if (clipping) { sst_write(LFBMODE, lfbmode | EN_PXL_PIPELINE); /* * Set "clipping" dimensions. If clipping is disabled and * writes to offscreen areas of the framebuffer are performed, * the "behaviour is undefined" (_very_ undefined) - Urs */ /* btw, it requires enabling pixel pipeline in LFBMODE . off screen read/writes will just wrap and read/print pixels on screen. Ugly but not that dangerous */ f_ddprintk("setting clipping dimensions 0..%d, 0..%d\n", info->var.xres - 1, par->yDim - 1); sst_write(CLIP_LEFT_RIGHT, info->var.xres); sst_write(CLIP_LOWY_HIGHY, par->yDim); sst_set_bits(FBZMODE, EN_CLIPPING | EN_RGB_WRITE); } else { /* no clipping : direct access, no pipeline */ sst_write(LFBMODE, lfbmode); } return 0; } /** * sstfb_setcolreg - Optional function. Sets a color register. * @regno: hardware colormap register * @red: frame buffer colormap structure * @green: The green value which can be up to 16 bits wide * @blue: The blue value which can be up to 16 bits wide. * @transp: If supported the alpha value which can be up to 16 bits wide. * @info: frame buffer info structure */ static int sstfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info) { struct sstfb_par *par = info->par; u32 col; f_dddprintk("sstfb_setcolreg\n"); f_dddprintk("%-2d rgbt: %#x, %#x, %#x, %#x\n", regno, red, green, blue, transp); if (regno > 15) return 0; red >>= (16 - info->var.red.length); green >>= (16 - info->var.green.length); blue >>= (16 - info->var.blue.length); transp >>= (16 - info->var.transp.length); col = (red << info->var.red.offset) | (green << info->var.green.offset) | (blue << info->var.blue.offset) | (transp << info->var.transp.offset); par->palette[regno] = col; return 0; } static void sstfb_setvgapass( struct fb_info *info, int enable ) { struct sstfb_par *par = info->par; struct pci_dev *sst_dev = par->dev; u32 fbiinit0, tmp; enable = enable ? 1:0; if (par->vgapass == enable) return; par->vgapass = enable; pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp); pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp | PCI_EN_INIT_WR ); fbiinit0 = sst_read (FBIINIT0); if (par->vgapass) { sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH); printk(KERN_INFO "fb%d: Enabling VGA pass-through\n", info->node ); } else { sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH); printk(KERN_INFO "fb%d: Disabling VGA pass-through\n", info->node ); } pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp); } static ssize_t store_vgapass(struct device *device, struct device_attribute *attr, const char *buf, size_t count) { struct fb_info *info = dev_get_drvdata(device); char ** last = NULL; int val; val = simple_strtoul(buf, last, 0); sstfb_setvgapass(info, val); return count; } static ssize_t show_vgapass(struct device *device, struct device_attribute *attr, char *buf) { struct fb_info *info = dev_get_drvdata(device); struct sstfb_par *par = info->par; return snprintf(buf, PAGE_SIZE, "%d\n", par->vgapass); } static struct device_attribute device_attrs[] = { __ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass) }; static int sstfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) { struct sstfb_par *par; u32 val; switch (cmd) { /* set/get VGA pass_through mode */ case SSTFB_SET_VGAPASS: if (copy_from_user(&val, (void __user *)arg, sizeof(val))) return -EFAULT; sstfb_setvgapass(info, val); return 0; case SSTFB_GET_VGAPASS: par = info->par; val = par->vgapass; if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; return 0; } return -EINVAL; } /* * Screen-to-Screen BitBlt 2D command (for the bmove fb op.) - Voodoo2 only */ #if 0 static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) { struct sstfb_par *par = info->par; u32 stride = info->fix.line_length; if (!IS_VOODOO2(par)) return; sst_write(BLTSRCBASEADDR, 0); sst_write(BLTDSTBASEADDR, 0); sst_write(BLTROP, BLTROP_COPY); sst_write(BLTXYSTRIDES, stride | (stride << 16)); sst_write(BLTSRCXY, area->sx | (area->sy << 16)); sst_write(BLTDSTXY, area->dx | (area->dy << 16)); sst_write(BLTSIZE, area->width | (area->height << 16)); sst_write(BLTCOMMAND, BLT_SCR2SCR_BITBLT | LAUNCH_BITBLT | (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) ); sst_wait_idle(); } #endif /* * FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only */ #if 0 static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) { struct sstfb_par *par = info->par; u32 stride = info->fix.line_length; if (!IS_VOODOO2(par)) return; sst_write(BLTCLIPX, info->var.xres); sst_write(BLTCLIPY, info->var.yres); sst_write(BLTDSTBASEADDR, 0); sst_write(BLTCOLOR, rect->color); sst_write(BLTROP, rect->rop == ROP_COPY ? BLTROP_COPY : BLTROP_XOR); sst_write(BLTXYSTRIDES, stride | (stride << 16)); sst_write(BLTDSTXY, rect->dx | (rect->dy << 16)); sst_write(BLTSIZE, rect->width | (rect->height << 16)); sst_write(BLTCOMMAND, BLT_RECFILL_BITBLT | LAUNCH_BITBLT | (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) ); sst_wait_idle(); } #endif /* * get lfb size */ static int __devinit sst_get_memsize(struct fb_info *info, __u32 *memsize) { u8 __iomem *fbbase_virt = info->screen_base; /* force memsize */ if (mem >= 1 && mem <= 4) { *memsize = (mem * 0x100000); printk(KERN_INFO "supplied memsize: %#x\n", *memsize); return 1; } writel(0xdeadbeef, fbbase_virt); writel(0xdeadbeef, fbbase_virt+0x100000); writel(0xdeadbeef, fbbase_virt+0x200000); f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n", readl(fbbase_virt), readl(fbbase_virt + 0x100000), readl(fbbase_virt + 0x200000)); writel(0xabcdef01, fbbase_virt); f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n", readl(fbbase_virt), readl(fbbase_virt + 0x100000), readl(fbbase_virt + 0x200000)); /* checks for 4mb lfb, then 2, then defaults to 1 */ if (readl(fbbase_virt + 0x200000) == 0xdeadbeef) *memsize = 0x400000; else if (readl(fbbase_virt + 0x100000) == 0xdeadbeef) *memsize = 0x200000; else *memsize = 0x100000; f_ddprintk("detected memsize: %dMB\n", *memsize >> 20); return 1; } /* * DAC detection routines */ /* fbi should be idle, and fifo emty and mem disabled */ /* supposed to detect AT&T ATT20C409 and Ti TVP3409 ramdacs */ static int __devinit sst_detect_att(struct fb_info *info) { struct sstfb_par *par = info->par; int i, mir, dir; for (i = 0; i < 3; i++) { sst_dac_write(DACREG_WMA, 0); /* backdoor */ sst_dac_read(DACREG_RMR); /* read 4 times RMR */ sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); /* the fifth time, CR0 is read */ sst_dac_read(DACREG_RMR); /* the 6th, manufacturer id register */ mir = sst_dac_read(DACREG_RMR); /*the 7th, device ID register */ dir = sst_dac_read(DACREG_RMR); f_ddprintk("mir: %#x, dir: %#x\n", mir, dir); if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) { return 1; } } return 0; } static int __devinit sst_detect_ti(struct fb_info *info) { struct sstfb_par *par = info->par; int i, mir, dir; for (i = 0; i<3; i++) { sst_dac_write(DACREG_WMA, 0); /* backdoor */ sst_dac_read(DACREG_RMR); /* read 4 times RMR */ sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); /* the fifth time, CR0 is read */ sst_dac_read(DACREG_RMR); /* the 6th, manufacturer id register */ mir = sst_dac_read(DACREG_RMR); /*the 7th, device ID register */ dir = sst_dac_read(DACREG_RMR); f_ddprintk("mir: %#x, dir: %#x\n", mir, dir); if ((mir == DACREG_MIR_TI ) && (dir == DACREG_DIR_TI)) { return 1; } } return 0; } /* * try to detect ICS5342 ramdac * we get the 1st byte (M value) of preset f1,f7 and fB * why those 3 ? mmmh... for now, i'll do it the glide way... * and ask questions later. anyway, it seems that all the freq registers are * realy at their default state (cf specs) so i ask again, why those 3 regs ? * mmmmh.. it seems that's much more ugly than i thought. we use f0 and fA for * pll programming, so in fact, we *hope* that the f1, f7 & fB won't be * touched... * is it realy safe ? how can i reset this ramdac ? geee... */ static int __devinit sst_detect_ics(struct fb_info *info) { struct sstfb_par *par = info->par; int m_clk0_1, m_clk0_7, m_clk1_b; int n_clk0_1, n_clk0_7, n_clk1_b; int i; for (i = 0; i<5; i++ ) { sst_dac_write(DACREG_ICS_PLLRMA, 0x1); /* f1 */ m_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA); n_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA); sst_dac_write(DACREG_ICS_PLLRMA, 0x7); /* f7 */ m_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA); n_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA); sst_dac_write(DACREG_ICS_PLLRMA, 0xb); /* fB */ m_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA); n_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA); f_ddprintk("m_clk0_1: %#x, m_clk0_7: %#x, m_clk1_b: %#x\n", m_clk0_1, m_clk0_7, m_clk1_b); f_ddprintk("n_clk0_1: %#x, n_clk0_7: %#x, n_clk1_b: %#x\n", n_clk0_1, n_clk0_7, n_clk1_b); if (( m_clk0_1 == DACREG_ICS_PLL_CLK0_1_INI) && (m_clk0_7 == DACREG_ICS_PLL_CLK0_7_INI) && (m_clk1_b == DACREG_ICS_PLL_CLK1_B_INI)) { return 1; } } return 0; } /* * gfx, video, pci fifo should be reset, dram refresh disabled * see detect_dac */ static int sst_set_pll_att_ti(struct fb_info *info, const struct pll_timing *t, const int clock) { struct sstfb_par *par = info->par; u8 cr0, cc; /* enable indexed mode */ sst_dac_write(DACREG_WMA, 0); /* backdoor */ sst_dac_read(DACREG_RMR); /* 1 time: RMR */ sst_dac_read(DACREG_RMR); /* 2 RMR */ sst_dac_read(DACREG_RMR); /* 3 // */ sst_dac_read(DACREG_RMR); /* 4 // */ cr0 = sst_dac_read(DACREG_RMR); /* 5 CR0 */ sst_dac_write(DACREG_WMA, 0); sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); sst_dac_write(DACREG_RMR, (cr0 & 0xf0) | DACREG_CR0_EN_INDEXED | DACREG_CR0_8BIT | DACREG_CR0_PWDOWN ); /* so, now we are in indexed mode . dunno if its common, but i find this way of doing things a little bit weird :p */ udelay(300); cc = dac_i_read(DACREG_CC_I); switch (clock) { case VID_CLOCK: dac_i_write(DACREG_AC0_I, t->m); dac_i_write(DACREG_AC1_I, t->p << 6 | t->n); dac_i_write(DACREG_CC_I, (cc & 0x0f) | DACREG_CC_CLKA | DACREG_CC_CLKA_C); break; case GFX_CLOCK: dac_i_write(DACREG_BD0_I, t->m); dac_i_write(DACREG_BD1_I, t->p << 6 | t->n); dac_i_write(DACREG_CC_I, (cc & 0xf0) | DACREG_CC_CLKB | DACREG_CC_CLKB_D); break; default: dprintk("%s: wrong clock code '%d'\n", __func__, clock); return 0; } udelay(300); /* power up the dac & return to "normal" non-indexed mode */ dac_i_write(DACREG_CR0_I, cr0 & ~DACREG_CR0_PWDOWN & ~DACREG_CR0_EN_INDEXED); return 1; } static int sst_set_pll_ics(struct fb_info *info, const struct pll_timing *t, const int clock) { struct sstfb_par *par = info->par; u8 pll_ctrl; sst_dac_write(DACREG_ICS_PLLRMA, DACREG_ICS_PLL_CTRL); pll_ctrl = sst_dac_read(DACREG_ICS_PLLDATA); switch(clock) { case VID_CLOCK: sst_dac_write(DACREG_ICS_PLLWMA, 0x0); /* CLK0, f0 */ sst_dac_write(DACREG_ICS_PLLDATA, t->m); sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n); /* selects freq f0 for clock 0 */ sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL); sst_dac_write(DACREG_ICS_PLLDATA, (pll_ctrl & 0xd8) | DACREG_ICS_CLK0 | DACREG_ICS_CLK0_0); break; case GFX_CLOCK : sst_dac_write(DACREG_ICS_PLLWMA, 0xa); /* CLK1, fA */ sst_dac_write(DACREG_ICS_PLLDATA, t->m); sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n); /* selects freq fA for clock 1 */ sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL); sst_dac_write(DACREG_ICS_PLLDATA, (pll_ctrl & 0xef) | DACREG_ICS_CLK1_A); break; default: dprintk("%s: wrong clock code '%d'\n", __func__, clock); return 0; } udelay(300); return 1; } static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp) { struct sstfb_par *par = info->par; u8 cr0; sst_dac_write(DACREG_WMA, 0); /* backdoor */ sst_dac_read(DACREG_RMR); /* read 4 times RMR */ sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); /* the fifth time, CR0 is read */ cr0 = sst_dac_read(DACREG_RMR); sst_dac_write(DACREG_WMA, 0); /* backdoor */ sst_dac_read(DACREG_RMR); /* read 4 times RMR */ sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); sst_dac_read(DACREG_RMR); /* cr0 */ switch(bpp) { case 16: sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP); break; default: dprintk("%s: bad depth '%u'\n", __func__, bpp); break; } } static void sst_set_vidmod_ics(struct fb_info *info, const int bpp) { struct sstfb_par *par = info->par; switch(bpp) { case 16: sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP); break; default: dprintk("%s: bad depth '%u'\n", __func__, bpp); break; } } /* * detect dac type * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset, * dram refresh disabled, FbiInit remaped. * TODO: mmh.. maybe i should put the "prerequisite" in the func ... */ static struct dac_switch dacs[] __devinitdata = { { .name = "TI TVP3409", .detect = sst_detect_ti, .set_pll = sst_set_pll_att_ti, .set_vidmod = sst_set_vidmod_att_ti }, { .name = "AT&T ATT20C409", .detect = sst_detect_att, .set_pll = sst_set_pll_att_ti, .set_vidmod = sst_set_vidmod_att_ti }, { .name = "ICS ICS5342", .detect = sst_detect_ics, .set_pll = sst_set_pll_ics, .set_vidmod = sst_set_vidmod_ics }, }; static int __devinit sst_detect_dactype(struct fb_info *info, struct sstfb_par *par) { int i, ret = 0; for (i = 0; i < ARRAY_SIZE(dacs); i++) { ret = dacs[i].detect(info); if (ret) break; } if (!ret) return 0; f_dprintk("%s found %s\n", __func__, dacs[i].name); par->dac_sw = dacs[i]; return 1; } /* * Internal Routines */ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par) { u32 fbiinit0, fbiinit1, fbiinit4; struct pci_dev *dev = par->dev; struct pll_timing gfx_timings; struct sst_spec *spec; int Fout; int gfx_clock; spec = &voodoo_spec[par->type]; f_ddprintk(" fbiinit0 fbiinit1 fbiinit2 fbiinit3 fbiinit4 " " fbiinit6\n"); f_ddprintk("%0#10x %0#10x %0#10x %0#10x %0#10x %0#10x\n", sst_read(FBIINIT0), sst_read(FBIINIT1), sst_read(FBIINIT2), sst_read(FBIINIT3), sst_read(FBIINIT4), sst_read(FBIINIT6)); /* disable video clock */ pci_write_config_dword(dev, PCI_VCLK_DISABLE, 0); /* enable writing to init registers, disable pci fifo */ pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR); /* reset video */ sst_set_bits(FBIINIT1, VIDEO_RESET); sst_wait_idle(); /* reset gfx + pci fifo */ sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET); sst_wait_idle(); /* unreset fifo */ /*sst_unset_bits(FBIINIT0, FIFO_RESET); sst_wait_idle();*/ /* unreset FBI */ /*sst_unset_bits(FBIINIT0, FBI_RESET); sst_wait_idle();*/ /* disable dram refresh */ sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH); sst_wait_idle(); /* remap fbinit2/3 to dac */ pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR | PCI_REMAP_DAC ); /* detect dac type */ if (!sst_detect_dactype(info, par)) { printk(KERN_ERR "sstfb: unknown dac type.\n"); //FIXME watch it: we are not in a safe state, bad bad bad. return 0; } /* set graphic clock */ gfx_clock = spec->default_gfx_clock; if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) { printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk); gfx_clock = gfxclk *1000; } else if (gfxclk) { printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk); } sst_calc_pll(gfx_clock, &Fout, &gfx_timings); par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK); /* disable fbiinit remap */ pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR| PCI_EN_FIFO_WR ); /* defaults init registers */ /* FbiInit0: unreset gfx, unreset fifo */ fbiinit0 = FBIINIT0_DEFAULT; fbiinit1 = FBIINIT1_DEFAULT; fbiinit4 = FBIINIT4_DEFAULT; par->vgapass = vgapass; if (par->vgapass) fbiinit0 &= ~DIS_VGA_PASSTHROUGH; else fbiinit0 |= DIS_VGA_PASSTHROUGH; if (slowpci) { fbiinit1 |= SLOW_PCI_WRITES; fbiinit4 |= SLOW_PCI_READS; } else { fbiinit1 &= ~SLOW_PCI_WRITES; fbiinit4 &= ~SLOW_PCI_READS; } sst_write(FBIINIT0, fbiinit0); sst_wait_idle(); sst_write(FBIINIT1, fbiinit1); sst_wait_idle(); sst_write(FBIINIT2, FBIINIT2_DEFAULT); sst_wait_idle(); sst_write(FBIINIT3, FBIINIT3_DEFAULT); sst_wait_idle(); sst_write(FBIINIT4, fbiinit4); sst_wait_idle(); if (IS_VOODOO2(par)) { sst_write(FBIINIT6, FBIINIT6_DEFAULT); sst_wait_idle(); } pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR); pci_write_config_dword(dev, PCI_VCLK_ENABLE, 0); return 1; } static void __devexit sst_shutdown(struct fb_info *info) { struct sstfb_par *par = info->par; struct pci_dev *dev = par->dev; struct pll_timing gfx_timings; int Fout; /* reset video, gfx, fifo, disable dram + remap fbiinit2/3 */ pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR); sst_set_bits(FBIINIT1, VIDEO_RESET | EN_BLANKING); sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH); sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET); sst_wait_idle(); pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR | PCI_REMAP_DAC); /* set 20Mhz gfx clock */ sst_calc_pll(20000, &Fout, &gfx_timings); par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK); /* TODO maybe shutdown the dac, vrefresh and so on... */ pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR); sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | DIS_VGA_PASSTHROUGH); pci_write_config_dword(dev, PCI_VCLK_DISABLE,0); /* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct * from start ? */ pci_write_config_dword(dev, PCI_INIT_ENABLE, 0); } /* * Interface to the world */ static int __devinit sstfb_setup(char *options) { char *this_opt; if (!options || !*options) return 0; while ((this_opt = strsep(&options, ",")) != NULL) { if (!*this_opt) continue; f_ddprintk("option %s\n", this_opt); if (!strcmp(this_opt, "vganopass")) vgapass = 0; else if (!strcmp(this_opt, "vgapass")) vgapass = 1; else if (!strcmp(this_opt, "clipping")) clipping = 1; else if (!strcmp(this_opt, "noclipping")) clipping = 0; else if (!strcmp(this_opt, "fastpci")) slowpci = 0; else if (!strcmp(this_opt, "slowpci")) slowpci = 1; else if (!strncmp(this_opt, "mem:",4)) mem = simple_strtoul (this_opt+4, NULL, 0); else if (!strncmp(this_opt, "gfxclk:",7)) gfxclk = simple_strtoul (this_opt+7, NULL, 0); else mode_option = this_opt; } return 0; } static struct fb_ops sstfb_ops = { .owner = THIS_MODULE, .fb_check_var = sstfb_check_var, .fb_set_par = sstfb_set_par, .fb_setcolreg = sstfb_setcolreg, .fb_fillrect = cfb_fillrect, /* sstfb_fillrect */ .fb_copyarea = cfb_copyarea, /* sstfb_copyarea */ .fb_imageblit = cfb_imageblit, .fb_ioctl = sstfb_ioctl, }; static int __devinit sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct fb_info *info; struct fb_fix_screeninfo *fix; struct sstfb_par *par; struct sst_spec *spec; int err; /* Enable device in PCI config. */ if ((err=pci_enable_device(pdev))) { printk(KERN_ERR "cannot enable device\n"); return err; } /* Allocate the fb and par structures. */ info = framebuffer_alloc(sizeof(struct sstfb_par), &pdev->dev); if (!info) return -ENOMEM; pci_set_drvdata(pdev, info); par = info->par; fix = &info->fix; par->type = id->driver_data; spec = &voodoo_spec[par->type]; f_ddprintk("found device : %s\n", spec->name); par->dev = pdev; par->revision = pdev->revision; fix->mmio_start = pci_resource_start(pdev,0); fix->mmio_len = 0x400000; fix->smem_start = fix->mmio_start + 0x400000; if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) { printk(KERN_ERR "sstfb: cannot reserve mmio memory\n"); goto fail_mmio_mem; } if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) { printk(KERN_ERR "sstfb: cannot reserve fb memory\n"); goto fail_fb_mem; } par->mmio_vbase = ioremap_nocache(fix->mmio_start, fix->mmio_len); if (!par->mmio_vbase) { printk(KERN_ERR "sstfb: cannot remap register area %#lx\n", fix->mmio_start); goto fail_mmio_remap; } info->screen_base = ioremap_nocache(fix->smem_start, 0x400000); if (!info->screen_base) { printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n", fix->smem_start); goto fail_fb_remap; } if (!sst_init(info, par)) { printk(KERN_ERR "sstfb: Init failed\n"); goto fail; } sst_get_memsize(info, &fix->smem_len); strlcpy(fix->id, spec->name, sizeof(fix->id)); printk(KERN_INFO "%s (revision %d) with %s dac\n", fix->id, par->revision, par->dac_sw.name); printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n", fix->smem_start, info->screen_base, fix->smem_len >> 20); f_ddprintk("regbase_virt: %#lx\n", par->mmio_vbase); f_ddprintk("membase_phys: %#lx\n", fix->smem_start); f_ddprintk("fbbase_virt: %p\n", info->screen_base); info->flags = FBINFO_DEFAULT; info->fbops = &sstfb_ops; info->pseudo_palette = par->palette; fix->type = FB_TYPE_PACKED_PIXELS; fix->visual = FB_VISUAL_TRUECOLOR; fix->accel = FB_ACCEL_NONE; /* FIXME */ /* * According to the specs, the linelength must be of 1024 *pixels* * and the 24bpp mode is in fact a 32 bpp mode (and both are in * fact dithered to 16bit). */ fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */ fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16); if (sstfb_check_var(&info->var, info)) { printk(KERN_ERR "sstfb: invalid video mode.\n"); goto fail; } if (sstfb_set_par(info)) { printk(KERN_ERR "sstfb: can't set default video mode.\n"); goto fail; } if (fb_alloc_cmap(&info->cmap, 256, 0)) { printk(KERN_ERR "sstfb: can't alloc cmap memory.\n"); goto fail; } /* register fb */ info->device = &pdev->dev; if (register_framebuffer(info) < 0) { printk(KERN_ERR "sstfb: can't register framebuffer.\n"); goto fail_register; } sstfb_clear_screen(info); if (device_create_file(info->dev, &device_attrs[0])) printk(KERN_WARNING "sstfb: can't create sysfs entry.\n"); printk(KERN_INFO "fb%d: %s frame buffer device at 0x%p\n", info->node, fix->id, info->screen_base); return 0; fail_register: fb_dealloc_cmap(&info->cmap); fail: iounmap(info->screen_base); fail_fb_remap: iounmap(par->mmio_vbase); fail_mmio_remap: release_mem_region(fix->smem_start, 0x400000); fail_fb_mem: release_mem_region(fix->mmio_start, info->fix.mmio_len); fail_mmio_mem: framebuffer_release(info); return -ENXIO; /* no voodoo detected */ } static void __devexit sstfb_remove(struct pci_dev *pdev) { struct sstfb_par *par; struct fb_info *info; info = pci_get_drvdata(pdev); par = info->par; device_remove_file(info->dev, &device_attrs[0]); sst_shutdown(info); iounmap(info->screen_base); iounmap(par->mmio_vbase); release_mem_region(info->fix.smem_start, 0x400000); release_mem_region(info->fix.mmio_start, info->fix.mmio_len); fb_dealloc_cmap(&info->cmap); unregister_framebuffer(info); framebuffer_release(info); } static const struct pci_device_id sstfb_id_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO ), .driver_data = ID_VOODOO1, }, { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2), .driver_data = ID_VOODOO2, }, { 0 }, }; static struct pci_driver sstfb_driver = { .name = "sstfb", .id_table = sstfb_id_tbl, .probe = sstfb_probe, .remove = __devexit_p(sstfb_remove), }; static int __devinit sstfb_init(void) { char *option = NULL; if (fb_get_options("sstfb", &option)) return -ENODEV; sstfb_setup(option); return pci_register_driver(&sstfb_driver); } static void __devexit sstfb_exit(void) { pci_unregister_driver(&sstfb_driver); } module_init(sstfb_init); module_exit(sstfb_exit); MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>"); MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards"); MODULE_LICENSE("GPL"); module_param(mem, int, 0); MODULE_PARM_DESC(mem, "Size of frame buffer memory in MB (1, 2, 4 MB, default=autodetect)"); module_param(vgapass, bool, 0); MODULE_PARM_DESC(vgapass, "Enable VGA PassThrough mode (0 or 1) (default=0)"); module_param(clipping, bool, 0); MODULE_PARM_DESC(clipping, "Enable clipping (slower, safer) (0 or 1) (default=1)"); module_param(gfxclk, int, 0); MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)"); module_param(slowpci, bool, 0); MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)"); module_param(mode_option, charp, 0); MODULE_PARM_DESC(mode_option, "Initial video mode (default=" DEFAULT_VIDEO_MODE ")");