/* * "splice": joining two ropes together by interweaving their strands. * * This is the "extended pipe" functionality, where a pipe is used as * an arbitrary in-memory buffer. Think of a pipe as a small kernel * buffer that you can use to transfer data from one end to the other. * * The traditional unix read/write is extended with a "splice()" operation * that transfers data buffers to or from a pipe buffer. * * Named by Larry McVoy, original implementation from Linus, extended by * Jens to support splicing to files, network, direct splicing, etc and * fixing lots of bugs. * * Copyright (C) 2005-2006 Jens Axboe <axboe@suse.de> * Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org> * Copyright (C) 2006 Ingo Molnar <mingo@elte.hu> * */ #include <linux/fs.h> #include <linux/file.h> #include <linux/pagemap.h> #include <linux/pipe_fs_i.h> #include <linux/mm_inline.h> #include <linux/swap.h> #include <linux/writeback.h> #include <linux/buffer_head.h> #include <linux/module.h> #include <linux/syscalls.h> /* * Passed to the actors */ struct splice_desc { unsigned int len, total_len; /* current and remaining length */ unsigned int flags; /* splice flags */ struct file *file; /* file to read/write */ loff_t pos; /* file position */ }; /* * Attempt to steal a page from a pipe buffer. This should perhaps go into * a vm helper function, it's already simplified quite a bit by the * addition of remove_mapping(). If success is returned, the caller may * attempt to reuse this page for another destination. */ static int page_cache_pipe_buf_steal(struct pipe_inode_info *info, struct pipe_buffer *buf) { struct page *page = buf->page; struct address_space *mapping = page_mapping(page); WARN_ON(!PageLocked(page)); WARN_ON(!PageUptodate(page)); /* * At least for ext2 with nobh option, we need to wait on writeback * completing on this page, since we'll remove it from the pagecache. * Otherwise truncate wont wait on the page, allowing the disk * blocks to be reused by someone else before we actually wrote our * data to them. fs corruption ensues. */ wait_on_page_writeback(page); if (PagePrivate(page)) try_to_release_page(page, mapping_gfp_mask(mapping)); if (!remove_mapping(mapping, page)) return 1; buf->flags |= PIPE_BUF_FLAG_STOLEN | PIPE_BUF_FLAG_LRU; return 0; } static void page_cache_pipe_buf_release(struct pipe_inode_info *info, struct pipe_buffer *buf) { page_cache_release(buf->page); buf->page = NULL; buf->flags &= ~(PIPE_BUF_FLAG_STOLEN | PIPE_BUF_FLAG_LRU); } static void *page_cache_pipe_buf_map(struct file *file, struct pipe_inode_info *info, struct pipe_buffer *buf) { struct page *page = buf->page; int err; if (!PageUptodate(page)) { lock_page(page); /* * Page got truncated/unhashed. This will cause a 0-byte * splice, if this is the first page. */ if (!page->mapping) { err = -ENODATA; goto error; } /* * Uh oh, read-error from disk. */ if (!PageUptodate(page)) { err = -EIO; goto error; } /* * Page is ok afterall, fall through to mapping. */ unlock_page(page); } return kmap(page); error: unlock_page(page); return ERR_PTR(err); } static void page_cache_pipe_buf_unmap(struct pipe_inode_info *info, struct pipe_buffer *buf) { kunmap(buf->page); } static void page_cache_pipe_buf_get(struct pipe_inode_info *info, struct pipe_buffer *buf) { page_cache_get(buf->page); } static struct pipe_buf_operations page_cache_pipe_buf_ops = { .can_merge = 0, .map = page_cache_pipe_buf_map, .unmap = page_cache_pipe_buf_unmap, .release = page_cache_pipe_buf_release, .steal = page_cache_pipe_buf_steal, .get = page_cache_pipe_buf_get, }; /* * Pipe output worker. This sets up our pipe format with the page cache * pipe buffer operations. Otherwise very similar to the regular pipe_writev(). */ static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages, int nr_pages, unsigned long offset, unsigned long len, unsigned int flags) { int ret, do_wakeup, i; ret = 0; do_wakeup = 0; i = 0; if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); for (;;) { if (!pipe->readers) { send_sig(SIGPIPE, current, 0); if (!ret) ret = -EPIPE; break; } if (pipe->nrbufs < PIPE_BUFFERS) { int newbuf = (pipe->curbuf + pipe->nrbufs) & (PIPE_BUFFERS - 1); struct pipe_buffer *buf = pipe->bufs + newbuf; struct page *page = pages[i++]; unsigned long this_len; this_len = PAGE_CACHE_SIZE - offset; if (this_len > len) this_len = len; buf->page = page; buf->offset = offset; buf->len = this_len; buf->ops = &page_cache_pipe_buf_ops; pipe->nrbufs++; if (pipe->inode) do_wakeup = 1; ret += this_len; len -= this_len; offset = 0; if (!--nr_pages) break; if (!len) break; if (pipe->nrbufs < PIPE_BUFFERS) continue; break; } if (flags & SPLICE_F_NONBLOCK) { if (!ret) ret = -EAGAIN; break; } if (signal_pending(current)) { if (!ret) ret = -ERESTARTSYS; break; } if (do_wakeup) { smp_mb(); if (waitqueue_active(&pipe->wait)) wake_up_interruptible_sync(&pipe->wait); kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); do_wakeup = 0; } pipe->waiting_writers++; pipe_wait(pipe); pipe->waiting_writers--; } if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); if (do_wakeup) { smp_mb(); if (waitqueue_active(&pipe->wait)) wake_up_interruptible(&pipe->wait); kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); } while (i < nr_pages) page_cache_release(pages[i++]); return ret; } static int __generic_file_splice_read(struct file *in, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags) { struct address_space *mapping = in->f_mapping; unsigned int offset, nr_pages; struct page *pages[PIPE_BUFFERS]; struct page *page; pgoff_t index; int i, error; index = *ppos >> PAGE_CACHE_SHIFT; offset = *ppos & ~PAGE_CACHE_MASK; nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; if (nr_pages > PIPE_BUFFERS) nr_pages = PIPE_BUFFERS; /* * Initiate read-ahead on this page range. however, don't call into * read-ahead if this is a non-zero offset (we are likely doing small * chunk splice and the page is already there) for a single page. */ if (!offset || nr_pages > 1) do_page_cache_readahead(mapping, in, index, nr_pages); /* * Now fill in the holes: */ error = 0; for (i = 0; i < nr_pages; i++, index++) { find_page: /* * lookup the page for this index */ page = find_get_page(mapping, index); if (!page) { /* * If in nonblock mode then dont block on * readpage (we've kicked readahead so there * will be asynchronous progress): */ if (flags & SPLICE_F_NONBLOCK) break; /* * page didn't exist, allocate one */ page = page_cache_alloc_cold(mapping); if (!page) break; error = add_to_page_cache_lru(page, mapping, index, mapping_gfp_mask(mapping)); if (unlikely(error)) { page_cache_release(page); break; } goto readpage; } /* * If the page isn't uptodate, we may need to start io on it */ if (!PageUptodate(page)) { lock_page(page); /* * page was truncated, stop here. if this isn't the * first page, we'll just complete what we already * added */ if (!page->mapping) { unlock_page(page); page_cache_release(page); break; } /* * page was already under io and is now done, great */ if (PageUptodate(page)) { unlock_page(page); goto fill_it; } readpage: /* * need to read in the page */ error = mapping->a_ops->readpage(in, page); if (unlikely(error)) { page_cache_release(page); if (error == AOP_TRUNCATED_PAGE) goto find_page; break; } } fill_it: pages[i] = page; } if (i) return move_to_pipe(pipe, pages, i, offset, len, flags); return error; } /** * generic_file_splice_read - splice data from file to a pipe * @in: file to splice from * @pipe: pipe to splice to * @len: number of bytes to splice * @flags: splice modifier flags * * Will read pages from given file and fill them into a pipe. */ ssize_t generic_file_splice_read(struct file *in, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags) { ssize_t spliced; int ret; ret = 0; spliced = 0; while (len) { ret = __generic_file_splice_read(in, ppos, pipe, len, flags); if (ret <= 0) break; *ppos += ret; len -= ret; spliced += ret; if (!(flags & SPLICE_F_NONBLOCK)) continue; ret = -EAGAIN; break; } if (spliced) return spliced; return ret; } EXPORT_SYMBOL(generic_file_splice_read); /* * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos' * using sendpage(). */ static int pipe_to_sendpage(struct pipe_inode_info *info, struct pipe_buffer *buf, struct splice_desc *sd) { struct file *file = sd->file; loff_t pos = sd->pos; unsigned int offset; ssize_t ret; void *ptr; int more; /* * Sub-optimal, but we are limited by the pipe ->map. We don't * need a kmap'ed buffer here, we just want to make sure we * have the page pinned if the pipe page originates from the * page cache. */ ptr = buf->ops->map(file, info, buf); if (IS_ERR(ptr)) return PTR_ERR(ptr); offset = pos & ~PAGE_CACHE_MASK; more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len; ret = file->f_op->sendpage(file, buf->page, offset, sd->len, &pos,more); buf->ops->unmap(info, buf); if (ret == sd->len) return 0; return -EIO; } /* * This is a little more tricky than the file -> pipe splicing. There are * basically three cases: * * - Destination page already exists in the address space and there * are users of it. For that case we have no other option that * copying the data. Tough luck. * - Destination page already exists in the address space, but there * are no users of it. Make sure it's uptodate, then drop it. Fall * through to last case. * - Destination page does not exist, we can add the pipe page to * the page cache and avoid the copy. * * If asked to move pages to the output file (SPLICE_F_MOVE is set in * sd->flags), we attempt to migrate pages from the pipe to the output * file address space page cache. This is possible if no one else has * the pipe page referenced outside of the pipe and page cache. If * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create * a new page in the output file page cache and fill/dirty that. */ static int pipe_to_file(struct pipe_inode_info *info, struct pipe_buffer *buf, struct splice_desc *sd) { struct file *file = sd->file; struct address_space *mapping = file->f_mapping; gfp_t gfp_mask = mapping_gfp_mask(mapping); unsigned int offset; struct page *page; pgoff_t index; char *src; int ret; /* * make sure the data in this buffer is uptodate */ src = buf->ops->map(file, info, buf); if (IS_ERR(src)) return PTR_ERR(src); index = sd->pos >> PAGE_CACHE_SHIFT; offset = sd->pos & ~PAGE_CACHE_MASK; /* * Reuse buf page, if SPLICE_F_MOVE is set. */ if (sd->flags & SPLICE_F_MOVE) { /* * If steal succeeds, buf->page is now pruned from the vm * side (LRU and page cache) and we can reuse it. */ if (buf->ops->steal(info, buf)) goto find_page; /* * this will also set the page locked */ page = buf->page; if (add_to_page_cache(page, mapping, index, gfp_mask)) goto find_page; if (!(buf->flags & PIPE_BUF_FLAG_LRU)) lru_cache_add(page); } else { find_page: ret = -ENOMEM; page = find_or_create_page(mapping, index, gfp_mask); if (!page) goto out_nomem; /* * If the page is uptodate, it is also locked. If it isn't * uptodate, we can mark it uptodate if we are filling the * full page. Otherwise we need to read it in first... */ if (!PageUptodate(page)) { if (sd->len < PAGE_CACHE_SIZE) { ret = mapping->a_ops->readpage(file, page); if (unlikely(ret)) goto out; lock_page(page); if (!PageUptodate(page)) { /* * Page got invalidated, repeat. */ if (!page->mapping) { unlock_page(page); page_cache_release(page); goto find_page; } ret = -EIO; goto out; } } else { WARN_ON(!PageLocked(page)); SetPageUptodate(page); } } } ret = mapping->a_ops->prepare_write(file, page, 0, sd->len); if (ret == AOP_TRUNCATED_PAGE) { page_cache_release(page); goto find_page; } else if (ret) goto out; if (!(buf->flags & PIPE_BUF_FLAG_STOLEN)) { char *dst = kmap_atomic(page, KM_USER0); memcpy(dst + offset, src + buf->offset, sd->len); flush_dcache_page(page); kunmap_atomic(dst, KM_USER0); } ret = mapping->a_ops->commit_write(file, page, 0, sd->len); if (ret == AOP_TRUNCATED_PAGE) { page_cache_release(page); goto find_page; } else if (ret) goto out; mark_page_accessed(page); balance_dirty_pages_ratelimited(mapping); out: if (!(buf->flags & PIPE_BUF_FLAG_STOLEN)) { page_cache_release(page); unlock_page(page); } out_nomem: buf->ops->unmap(info, buf); return ret; } typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *, struct splice_desc *); /* * Pipe input worker. Most of this logic works like a regular pipe, the * key here is the 'actor' worker passed in that actually moves the data * to the wanted destination. See pipe_to_file/pipe_to_sendpage above. */ static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, size_t len, unsigned int flags, splice_actor *actor) { int ret, do_wakeup, err; struct splice_desc sd; ret = 0; do_wakeup = 0; sd.total_len = len; sd.flags = flags; sd.file = out; sd.pos = *ppos; if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); for (;;) { if (pipe->nrbufs) { struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; struct pipe_buf_operations *ops = buf->ops; sd.len = buf->len; if (sd.len > sd.total_len) sd.len = sd.total_len; err = actor(pipe, buf, &sd); if (err) { if (!ret && err != -ENODATA) ret = err; break; } ret += sd.len; buf->offset += sd.len; buf->len -= sd.len; if (!buf->len) { buf->ops = NULL; ops->release(pipe, buf); pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); pipe->nrbufs--; if (pipe->inode) do_wakeup = 1; } sd.pos += sd.len; sd.total_len -= sd.len; if (!sd.total_len) break; } if (pipe->nrbufs) continue; if (!pipe->writers) break; if (!pipe->waiting_writers) { if (ret) break; } if (flags & SPLICE_F_NONBLOCK) { if (!ret) ret = -EAGAIN; break; } if (signal_pending(current)) { if (!ret) ret = -ERESTARTSYS; break; } if (do_wakeup) { smp_mb(); if (waitqueue_active(&pipe->wait)) wake_up_interruptible_sync(&pipe->wait); kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); do_wakeup = 0; } pipe_wait(pipe); } if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); if (do_wakeup) { smp_mb(); if (waitqueue_active(&pipe->wait)) wake_up_interruptible(&pipe->wait); kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); } return ret; } /** * generic_file_splice_write - splice data from a pipe to a file * @pipe: pipe info * @out: file to write to * @len: number of bytes to splice * @flags: splice modifier flags * * Will either move or copy pages (determined by @flags options) from * the given pipe inode to the given file. * */ ssize_t generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, size_t len, unsigned int flags) { struct address_space *mapping = out->f_mapping; ssize_t ret; ret = move_from_pipe(pipe, out, ppos, len, flags, pipe_to_file); /* * If file or inode is SYNC and we actually wrote some data, sync it. */ if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(mapping->host)) && ret > 0) { struct inode *inode = mapping->host; int err; mutex_lock(&inode->i_mutex); err = generic_osync_inode(mapping->host, mapping, OSYNC_METADATA|OSYNC_DATA); mutex_unlock(&inode->i_mutex); if (err) ret = err; } return ret; } EXPORT_SYMBOL(generic_file_splice_write); /** * generic_splice_sendpage - splice data from a pipe to a socket * @inode: pipe inode * @out: socket to write to * @len: number of bytes to splice * @flags: splice modifier flags * * Will send @len bytes from the pipe to a network socket. No data copying * is involved. * */ ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, size_t len, unsigned int flags) { return move_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage); } EXPORT_SYMBOL(generic_splice_sendpage); /* * Attempt to initiate a splice from pipe to file. */ static long do_splice_from(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, size_t len, unsigned int flags) { int ret; if (unlikely(!out->f_op || !out->f_op->splice_write)) return -EINVAL; if (unlikely(!(out->f_mode & FMODE_WRITE))) return -EBADF; ret = rw_verify_area(WRITE, out, ppos, len); if (unlikely(ret < 0)) return ret; return out->f_op->splice_write(pipe, out, ppos, len, flags); } /* * Attempt to initiate a splice from a file to a pipe. */ static long do_splice_to(struct file *in, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags) { loff_t isize, left; int ret; if (unlikely(!in->f_op || !in->f_op->splice_read)) return -EINVAL; if (unlikely(!(in->f_mode & FMODE_READ))) return -EBADF; ret = rw_verify_area(READ, in, ppos, len); if (unlikely(ret < 0)) return ret; isize = i_size_read(in->f_mapping->host); if (unlikely(*ppos >= isize)) return 0; left = isize - *ppos; if (unlikely(left < len)) len = left; return in->f_op->splice_read(in, ppos, pipe, len, flags); } long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, size_t len, unsigned int flags) { struct pipe_inode_info *pipe; long ret, bytes; loff_t out_off; umode_t i_mode; int i; /* * We require the input being a regular file, as we don't want to * randomly drop data for eg socket -> socket splicing. Use the * piped splicing for that! */ i_mode = in->f_dentry->d_inode->i_mode; if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode))) return -EINVAL; /* * neither in nor out is a pipe, setup an internal pipe attached to * 'out' and transfer the wanted data from 'in' to 'out' through that */ pipe = current->splice_pipe; if (unlikely(!pipe)) { pipe = alloc_pipe_info(NULL); if (!pipe) return -ENOMEM; /* * We don't have an immediate reader, but we'll read the stuff * out of the pipe right after the move_to_pipe(). So set * PIPE_READERS appropriately. */ pipe->readers = 1; current->splice_pipe = pipe; } /* * Do the splice. */ ret = 0; bytes = 0; out_off = 0; while (len) { size_t read_len, max_read_len; /* * Do at most PIPE_BUFFERS pages worth of transfer: */ max_read_len = min(len, (size_t)(PIPE_BUFFERS*PAGE_SIZE)); ret = do_splice_to(in, ppos, pipe, max_read_len, flags); if (unlikely(ret < 0)) goto out_release; read_len = ret; /* * NOTE: nonblocking mode only applies to the input. We * must not do the output in nonblocking mode as then we * could get stuck data in the internal pipe: */ ret = do_splice_from(pipe, out, &out_off, read_len, flags & ~SPLICE_F_NONBLOCK); if (unlikely(ret < 0)) goto out_release; bytes += ret; len -= ret; /* * In nonblocking mode, if we got back a short read then * that was due to either an IO error or due to the * pagecache entry not being there. In the IO error case * the _next_ splice attempt will produce a clean IO error * return value (not a short read), so in both cases it's * correct to break out of the loop here: */ if ((flags & SPLICE_F_NONBLOCK) && (read_len < max_read_len)) break; } pipe->nrbufs = pipe->curbuf = 0; return bytes; out_release: /* * If we did an incomplete transfer we must release * the pipe buffers in question: */ for (i = 0; i < PIPE_BUFFERS; i++) { struct pipe_buffer *buf = pipe->bufs + i; if (buf->ops) { buf->ops->release(pipe, buf); buf->ops = NULL; } } pipe->nrbufs = pipe->curbuf = 0; /* * If we transferred some data, return the number of bytes: */ if (bytes > 0) return bytes; return ret; } EXPORT_SYMBOL(do_splice_direct); /* * Determine where to splice to/from. */ static long do_splice(struct file *in, loff_t __user *off_in, struct file *out, loff_t __user *off_out, size_t len, unsigned int flags) { struct pipe_inode_info *pipe; loff_t offset, *off; pipe = in->f_dentry->d_inode->i_pipe; if (pipe) { if (off_in) return -ESPIPE; if (off_out) { if (out->f_op->llseek == no_llseek) return -EINVAL; if (copy_from_user(&offset, off_out, sizeof(loff_t))) return -EFAULT; off = &offset; } else off = &out->f_pos; return do_splice_from(pipe, out, off, len, flags); } pipe = out->f_dentry->d_inode->i_pipe; if (pipe) { if (off_out) return -ESPIPE; if (off_in) { if (in->f_op->llseek == no_llseek) return -EINVAL; if (copy_from_user(&offset, off_in, sizeof(loff_t))) return -EFAULT; off = &offset; } else off = &in->f_pos; return do_splice_to(in, off, pipe, len, flags); } return -EINVAL; } asmlinkage long sys_splice(int fd_in, loff_t __user *off_in, int fd_out, loff_t __user *off_out, size_t len, unsigned int flags) { long error; struct file *in, *out; int fput_in, fput_out; if (unlikely(!len)) return 0; error = -EBADF; in = fget_light(fd_in, &fput_in); if (in) { if (in->f_mode & FMODE_READ) { out = fget_light(fd_out, &fput_out); if (out) { if (out->f_mode & FMODE_WRITE) error = do_splice(in, off_in, out, off_out, len, flags); fput_light(out, fput_out); } } fput_light(in, fput_in); } return error; } /* * Link contents of ipipe to opipe. */ static int link_pipe(struct pipe_inode_info *ipipe, struct pipe_inode_info *opipe, size_t len, unsigned int flags) { struct pipe_buffer *ibuf, *obuf; int ret = 0, do_wakeup = 0, i; /* * Potential ABBA deadlock, work around it by ordering lock * grabbing by inode address. Otherwise two different processes * could deadlock (one doing tee from A -> B, the other from B -> A). */ if (ipipe->inode < opipe->inode) { mutex_lock(&ipipe->inode->i_mutex); mutex_lock(&opipe->inode->i_mutex); } else { mutex_lock(&opipe->inode->i_mutex); mutex_lock(&ipipe->inode->i_mutex); } for (i = 0;; i++) { if (!opipe->readers) { send_sig(SIGPIPE, current, 0); if (!ret) ret = -EPIPE; break; } if (ipipe->nrbufs - i) { ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1)); /* * If we have room, fill this buffer */ if (opipe->nrbufs < PIPE_BUFFERS) { int nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1); /* * Get a reference to this pipe buffer, * so we can copy the contents over. */ ibuf->ops->get(ipipe, ibuf); obuf = opipe->bufs + nbuf; *obuf = *ibuf; if (obuf->len > len) obuf->len = len; opipe->nrbufs++; do_wakeup = 1; ret += obuf->len; len -= obuf->len; if (!len) break; if (opipe->nrbufs < PIPE_BUFFERS) continue; } /* * We have input available, but no output room. * If we already copied data, return that. */ if (flags & SPLICE_F_NONBLOCK) { if (!ret) ret = -EAGAIN; break; } if (signal_pending(current)) { if (!ret) ret = -ERESTARTSYS; break; } if (do_wakeup) { smp_mb(); if (waitqueue_active(&opipe->wait)) wake_up_interruptible(&opipe->wait); kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN); do_wakeup = 0; } opipe->waiting_writers++; pipe_wait(opipe); opipe->waiting_writers--; continue; } /* * No input buffers, do the usual checks for available * writers and blocking and wait if necessary */ if (!ipipe->writers) break; if (!ipipe->waiting_writers) { if (ret) break; } if (flags & SPLICE_F_NONBLOCK) { if (!ret) ret = -EAGAIN; break; } if (signal_pending(current)) { if (!ret) ret = -ERESTARTSYS; break; } if (waitqueue_active(&ipipe->wait)) wake_up_interruptible_sync(&ipipe->wait); kill_fasync(&ipipe->fasync_writers, SIGIO, POLL_OUT); pipe_wait(ipipe); } mutex_unlock(&ipipe->inode->i_mutex); mutex_unlock(&opipe->inode->i_mutex); if (do_wakeup) { smp_mb(); if (waitqueue_active(&opipe->wait)) wake_up_interruptible(&opipe->wait); kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN); } return ret; } /* * This is a tee(1) implementation that works on pipes. It doesn't copy * any data, it simply references the 'in' pages on the 'out' pipe. * The 'flags' used are the SPLICE_F_* variants, currently the only * applicable one is SPLICE_F_NONBLOCK. */ static long do_tee(struct file *in, struct file *out, size_t len, unsigned int flags) { struct pipe_inode_info *ipipe = in->f_dentry->d_inode->i_pipe; struct pipe_inode_info *opipe = out->f_dentry->d_inode->i_pipe; /* * Link ipipe to the two output pipes, consuming as we go along. */ if (ipipe && opipe) return link_pipe(ipipe, opipe, len, flags); return -EINVAL; } asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags) { struct file *in; int error, fput_in; if (unlikely(!len)) return 0; error = -EBADF; in = fget_light(fdin, &fput_in); if (in) { if (in->f_mode & FMODE_READ) { int fput_out; struct file *out = fget_light(fdout, &fput_out); if (out) { if (out->f_mode & FMODE_WRITE) error = do_tee(in, out, len, flags); fput_light(out, fput_out); } } fput_light(in, fput_in); } return error; }