/* Freescale Local Bus Controller * * Copyright (c) 2006-2007 Freescale Semiconductor * * Authors: Nick Spence <nick.spence@freescale.com>, * Scott Wood <scottwood@freescale.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_FSL_LBC_H #define __ASM_FSL_LBC_H #include <linux/types.h> #include <linux/spinlock.h> #include <asm/io.h> struct fsl_lbc_bank { __be32 br; /**< Base Register */ #define BR_BA 0xFFFF8000 #define BR_BA_SHIFT 15 #define BR_PS 0x00001800 #define BR_PS_SHIFT 11 #define BR_PS_8 0x00000800 /* Port Size 8 bit */ #define BR_PS_16 0x00001000 /* Port Size 16 bit */ #define BR_PS_32 0x00001800 /* Port Size 32 bit */ #define BR_DECC 0x00000600 #define BR_DECC_SHIFT 9 #define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */ #define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */ #define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */ #define BR_WP 0x00000100 #define BR_WP_SHIFT 8 #define BR_MSEL 0x000000E0 #define BR_MSEL_SHIFT 5 #define BR_MS_GPCM 0x00000000 /* GPCM */ #define BR_MS_FCM 0x00000020 /* FCM */ #define BR_MS_SDRAM 0x00000060 /* SDRAM */ #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ #define BR_MS_UPMC 0x000000C0 /* UPMC */ #define BR_V 0x00000001 #define BR_V_SHIFT 0 #define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) __be32 or; /**< Base Register */ #define OR0 0x5004 #define OR1 0x500C #define OR2 0x5014 #define OR3 0x501C #define OR4 0x5024 #define OR5 0x502C #define OR6 0x5034 #define OR7 0x503C #define OR_FCM_AM 0xFFFF8000 #define OR_FCM_AM_SHIFT 15 #define OR_FCM_BCTLD 0x00001000 #define OR_FCM_BCTLD_SHIFT 12 #define OR_FCM_PGS 0x00000400 #define OR_FCM_PGS_SHIFT 10 #define OR_FCM_CSCT 0x00000200 #define OR_FCM_CSCT_SHIFT 9 #define OR_FCM_CST 0x00000100 #define OR_FCM_CST_SHIFT 8 #define OR_FCM_CHT 0x00000080 #define OR_FCM_CHT_SHIFT 7 #define OR_FCM_SCY 0x00000070 #define OR_FCM_SCY_SHIFT 4 #define OR_FCM_SCY_1 0x00000010 #define OR_FCM_SCY_2 0x00000020 #define OR_FCM_SCY_3 0x00000030 #define OR_FCM_SCY_4 0x00000040 #define OR_FCM_SCY_5 0x00000050 #define OR_FCM_SCY_6 0x00000060 #define OR_FCM_SCY_7 0x00000070 #define OR_FCM_RST 0x00000008 #define OR_FCM_RST_SHIFT 3 #define OR_FCM_TRLX 0x00000004 #define OR_FCM_TRLX_SHIFT 2 #define OR_FCM_EHTR 0x00000002 #define OR_FCM_EHTR_SHIFT 1 }; struct fsl_lbc_regs { struct fsl_lbc_bank bank[8]; u8 res0[0x28]; __be32 mar; /**< UPM Address Register */ u8 res1[0x4]; __be32 mamr; /**< UPMA Mode Register */ #define MxMR_OP_NO (0 << 28) /**< normal operation */ #define MxMR_OP_WA (1 << 28) /**< write array */ #define MxMR_OP_RA (2 << 28) /**< read array */ #define MxMR_OP_RP (3 << 28) /**< run pattern */ #define MxMR_MAD 0x3f /**< machine address */ __be32 mbmr; /**< UPMB Mode Register */ __be32 mcmr; /**< UPMC Mode Register */ u8 res2[0x8]; __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ __be32 mdr; /**< UPM Data Register */ u8 res3[0x4]; __be32 lsor; /**< Special Operation Initiation Register */ __be32 lsdmr; /**< SDRAM Mode Register */ u8 res4[0x8]; __be32 lurt; /**< UPM Refresh Timer */ __be32 lsrt; /**< SDRAM Refresh Timer */ u8 res5[0x8]; __be32 ltesr; /**< Transfer Error Status Register */ #define LTESR_BM 0x80000000 #define LTESR_FCT 0x40000000 #define LTESR_PAR 0x20000000 #define LTESR_WP 0x04000000 #define LTESR_ATMW 0x00800000 #define LTESR_ATMR 0x00400000 #define LTESR_CS 0x00080000 #define LTESR_CC 0x00000001 #define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) __be32 ltedr; /**< Transfer Error Disable Register */ __be32 lteir; /**< Transfer Error Interrupt Register */ __be32 lteatr; /**< Transfer Error Attributes Register */ __be32 ltear; /**< Transfer Error Address Register */ u8 res6[0xC]; __be32 lbcr; /**< Configuration Register */ #define LBCR_LDIS 0x80000000 #define LBCR_LDIS_SHIFT 31 #define LBCR_BCTLC 0x00C00000 #define LBCR_BCTLC_SHIFT 22 #define LBCR_AHD 0x00200000 #define LBCR_LPBSE 0x00020000 #define LBCR_LPBSE_SHIFT 17 #define LBCR_EPAR 0x00010000 #define LBCR_EPAR_SHIFT 16 #define LBCR_BMT 0x0000FF00 #define LBCR_BMT_SHIFT 8 #define LBCR_INIT 0x00040000 __be32 lcrr; /**< Clock Ratio Register */ #define LCRR_DBYP 0x80000000 #define LCRR_DBYP_SHIFT 31 #define LCRR_BUFCMDC 0x30000000 #define LCRR_BUFCMDC_SHIFT 28 #define LCRR_ECL 0x03000000 #define LCRR_ECL_SHIFT 24 #define LCRR_EADC 0x00030000 #define LCRR_EADC_SHIFT 16 #define LCRR_CLKDIV 0x0000000F #define LCRR_CLKDIV_SHIFT 0 u8 res7[0x8]; __be32 fmr; /**< Flash Mode Register */ #define FMR_CWTO 0x0000F000 #define FMR_CWTO_SHIFT 12 #define FMR_BOOT 0x00000800 #define FMR_ECCM 0x00000100 #define FMR_AL 0x00000030 #define FMR_AL_SHIFT 4 #define FMR_OP 0x00000003 #define FMR_OP_SHIFT 0 __be32 fir; /**< Flash Instruction Register */ #define FIR_OP0 0xF0000000 #define FIR_OP0_SHIFT 28 #define FIR_OP1 0x0F000000 #define FIR_OP1_SHIFT 24 #define FIR_OP2 0x00F00000 #define FIR_OP2_SHIFT 20 #define FIR_OP3 0x000F0000 #define FIR_OP3_SHIFT 16 #define FIR_OP4 0x0000F000 #define FIR_OP4_SHIFT 12 #define FIR_OP5 0x00000F00 #define FIR_OP5_SHIFT 8 #define FIR_OP6 0x000000F0 #define FIR_OP6_SHIFT 4 #define FIR_OP7 0x0000000F #define FIR_OP7_SHIFT 0 #define FIR_OP_NOP 0x0 /* No operation and end of sequence */ #define FIR_OP_CA 0x1 /* Issue current column address */ #define FIR_OP_PA 0x2 /* Issue current block+page address */ #define FIR_OP_UA 0x3 /* Issue user defined address */ #define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ #define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ #define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ #define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ #define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ #define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ #define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ #define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ #define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ #define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ #define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ #define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */ __be32 fcr; /**< Flash Command Register */ #define FCR_CMD0 0xFF000000 #define FCR_CMD0_SHIFT 24 #define FCR_CMD1 0x00FF0000 #define FCR_CMD1_SHIFT 16 #define FCR_CMD2 0x0000FF00 #define FCR_CMD2_SHIFT 8 #define FCR_CMD3 0x000000FF #define FCR_CMD3_SHIFT 0 __be32 fbar; /**< Flash Block Address Register */ #define FBAR_BLK 0x00FFFFFF __be32 fpar; /**< Flash Page Address Register */ #define FPAR_SP_PI 0x00007C00 #define FPAR_SP_PI_SHIFT 10 #define FPAR_SP_MS 0x00000200 #define FPAR_SP_CI 0x000001FF #define FPAR_SP_CI_SHIFT 0 #define FPAR_LP_PI 0x0003F000 #define FPAR_LP_PI_SHIFT 12 #define FPAR_LP_MS 0x00000800 #define FPAR_LP_CI 0x000007FF #define FPAR_LP_CI_SHIFT 0 __be32 fbcr; /**< Flash Byte Count Register */ #define FBCR_BC 0x00000FFF u8 res11[0x8]; u8 res8[0xF00]; }; extern struct fsl_lbc_regs __iomem *fsl_lbc_regs; extern spinlock_t fsl_lbc_lock; /* * FSL UPM routines */ struct fsl_upm { __be32 __iomem *mxmr; int width; }; extern int fsl_lbc_find(phys_addr_t addr_base); extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); /** * fsl_upm_start_pattern - start UPM patterns execution * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find * @pat_offset: UPM pattern offset for the command to be executed * * This routine programmes UPM so the next memory access that hits an UPM * will trigger pattern execution, starting at pat_offset. */ static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset) { clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset); } /** * fsl_upm_end_pattern - end UPM patterns execution * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find * * This routine reverts UPM to normal operation mode. */ static inline void fsl_upm_end_pattern(struct fsl_upm *upm) { clrbits32(upm->mxmr, MxMR_OP_RP); while (in_be32(upm->mxmr) & MxMR_OP_RP) cpu_relax(); } /** * fsl_upm_run_pattern - actually run an UPM pattern * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find * @io_base: remapped pointer to where memory access should happen * @mar: MAR register content during pattern execution * * This function triggers dummy write to the memory specified by the io_base, * thus UPM pattern actually executed. Note that mar usage depends on the * pre-programmed AMX bits in the UPM RAM. */ static inline int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) { int ret = 0; unsigned long flags; spin_lock_irqsave(&fsl_lbc_lock, flags); out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); switch (upm->width) { case 8: out_8(io_base, 0x0); break; case 16: out_be16(io_base, 0x0); break; case 32: out_be32(io_base, 0x0); break; default: ret = -EINVAL; break; } spin_unlock_irqrestore(&fsl_lbc_lock, flags); return ret; } #endif /* __ASM_FSL_LBC_H */