/* * include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board * * Copyright (C) 2001,02,03 NEC Corporation * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> * * This file is subject to the terms and conditions of the GNU General * Public License. See the file COPYING in the main directory of this * archive for more details. * * Written by Miles Bader <miles@gnu.org> */ #ifndef __V850_RTE_ME2_CB_H__ #define __V850_RTE_ME2_CB_H__ #include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */ #define PLATFORM "rte-v850e/me2-cb" #define PLATFORM_LONG "Midas lab RTE-V850E/ME2-CB" #define CPU_CLOCK_FREQ 150000000 /* 150MHz */ #define FIXED_BOGOMIPS 50 /* 32MB of onbard SDRAM. */ #define SDRAM_ADDR 0x00800000 #define SDRAM_SIZE 0x02000000 /* 32MB */ /* CPU addresses of GBUS memory spaces. */ #define GCS0_ADDR 0x04000000 /* GCS0 - Common SRAM (2MB) */ #define GCS0_SIZE 0x00800000 /* 8MB */ #define GCS1_ADDR 0x04800000 /* GCS1 - Flash ROM (8MB) */ #define GCS1_SIZE 0x00800000 /* 8MB */ #define GCS2_ADDR 0x07000000 /* GCS2 - I/O registers */ #define GCS2_SIZE 0x00800000 /* 8MB */ #define GCS5_ADDR 0x08000000 /* GCS5 - PCI bus space */ #define GCS5_SIZE 0x02000000 /* 32MB */ #define GCS6_ADDR 0x07800000 /* GCS6 - PCI control registers */ #define GCS6_SIZE 0x00800000 /* 8MB */ /* For <asm/page.h> */ #define PAGE_OFFSET SDRAM_ADDR #ifdef CONFIG_ROM_KERNEL /* Kernel is in ROM, starting at address 0. */ #define INTV_BASE 0 #define ROOT_FS_IMAGE_RW 0 #else /* !CONFIG_ROM_KERNEL */ /* Using RAM-kernel. Assume some sort of boot-loader got us loaded at address 0. */ #define INTV_BASE 0 #define ROOT_FS_IMAGE_RW 1 #endif /* CONFIG_ROM_KERNEL */ /* Some misc. on-board devices. */ /* Seven-segment LED display (four digits). */ #define LED_ADDR(n) (0x0FE02000 + (n)) #define LED(n) (*(volatile unsigned char *)LED_ADDR(n)) #define LED_NUM_DIGITS 4 /* On-board PIC. */ #define CB_PIC_BASE_ADDR 0x0FE04000 #define CB_PIC_INT0M_ADDR (CB_PIC_BASE_ADDR + 0x00) #define CB_PIC_INT0M (*(volatile u16 *)CB_PIC_INT0M_ADDR) #define CB_PIC_INT1M_ADDR (CB_PIC_BASE_ADDR + 0x10) #define CB_PIC_INT1M (*(volatile u16 *)CB_PIC_INT1M_ADDR) #define CB_PIC_INTR_ADDR (CB_PIC_BASE_ADDR + 0x20) #define CB_PIC_INTR (*(volatile u16 *)CB_PIC_INTR_ADDR) #define CB_PIC_INTEN_ADDR (CB_PIC_BASE_ADDR + 0x30) #define CB_PIC_INTEN (*(volatile u16 *)CB_PIC_INTEN_ADDR) #define CB_PIC_INT0EN 0x0001 #define CB_PIC_INT1EN 0x0002 #define CB_PIC_INT0SEL 0x0080 /* The PIC interrupts themselves. */ #define CB_PIC_BASE_IRQ NUM_CPU_IRQS #define IRQ_CB_PIC_NUM 10 /* Some specific CB_PIC interrupts. */ #define IRQ_CB_EXTTM0 (CB_PIC_BASE_IRQ + 0) #define IRQ_CB_EXTSIO (CB_PIC_BASE_IRQ + 1) #define IRQ_CB_TOVER (CB_PIC_BASE_IRQ + 2) #define IRQ_CB_GINT0 (CB_PIC_BASE_IRQ + 3) #define IRQ_CB_USB (CB_PIC_BASE_IRQ + 4) #define IRQ_CB_LANC (CB_PIC_BASE_IRQ + 5) #define IRQ_CB_USB_VBUS_ON (CB_PIC_BASE_IRQ + 6) #define IRQ_CB_USB_VBUS_OFF (CB_PIC_BASE_IRQ + 7) #define IRQ_CB_EXTTM1 (CB_PIC_BASE_IRQ + 8) #define IRQ_CB_EXTTM2 (CB_PIC_BASE_IRQ + 9) /* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to the INTP65 - INTP67 pins on the CPU. These are shared among the GBUS interrupts. */ #define IRQ_GINT(n) IRQ_INTP((n) + 9) /* 0 is unused! */ #define IRQ_GINT_NUM 4 /* 0 is unused! */ /* The shared interrupt line from the PIC is connected to CPU pin INTP23. */ #define IRQ_CB_PIC IRQ_INTP(4) /* P23 */ /* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */ #define NUM_RTE_CB_IRQS (NUM_CPU_IRQS + IRQ_CB_PIC_NUM) #ifndef __ASSEMBLY__ struct cb_pic_irq_init { const char *name; /* name of interrupt type */ /* Range of kernel irq numbers for this type: BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */ unsigned base, num, interval; unsigned priority; /* interrupt priority to assign */ }; struct hw_interrupt_type; /* fwd decl */ /* Enable interrupt handling for interrupt IRQ. */ extern void cb_pic_enable_irq (unsigned irq); /* Disable interrupt handling for interrupt IRQ. Note that any interrupts received while disabled will be delivered once the interrupt is enabled again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'. */ extern void cb_pic_disable_irq (unsigned irq); /* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is terminated by an entry with the name field == 0). */ extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits, struct hw_interrupt_type *hw_irq_types); /* Initialize PIC interrupts. */ extern void cb_pic_init_irqs (void); #endif /* __ASSEMBLY__ */ /* TL16C550C on board UART see also asm/serial.h */ #define CB_UART_BASE 0x0FE08000 #define CB_UART_REG_GAP 0x10 #define CB_UART_CLOCK 0x16000000 /* CompactFlash setting */ #define CB_CF_BASE 0x0FE0C000 #define CB_CF_CCR_ADDR (CB_CF_BASE+0x200) #define CB_CF_CCR (*(volatile u8 *)CB_CF_CCR_ADDR) #define CB_CF_REG0_ADDR (CB_CF_BASE+0x1000) #define CB_CF_REG0 (*(volatile u16 *)CB_CF_REG0_ADDR) #define CB_CF_STS0_ADDR (CB_CF_BASE+0x1004) #define CB_CF_STS0 (*(volatile u16 *)CB_CF_STS0_ADDR) #define CB_PCATA_BASE (CB_CF_BASE+0x800) #define CB_IDE_BASE (CB_CF_BASE+0x9F0) #define CB_IDE_CTRL (CB_CF_BASE+0xBF6) #define CB_IDE_REG_OFFS 0x1 /* SMSC LAN91C111 setting */ #if defined(CONFIG_SMC91111) #define CB_LANC_BASE 0x0FE10300 #define CONFIG_SMC16BITONLY #define ETH0_ADDR CB_LANC_BASE #define ETH0_IRQ IRQ_CB_LANC #endif /* CONFIG_SMC16BITONLY */ #undef V850E_UART_PRE_CONFIGURE #define V850E_UART_PRE_CONFIGURE rte_me2_cb_uart_pre_configure #ifndef __ASSEMBLY__ extern void rte_me2_cb_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud); #endif /* __ASSEMBLY__ */ /* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */ /* CTS for UART channel 0 is pin P22 (bit 2 of port 2). */ #define V850E_UART_CTS(chan) ((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1) /* RTS for UART channel 0 is pin P21 (bit 1 of port 2). */ #define V850E_UART_SET_RTS(chan, val) \ do { \ if (chan == 0) { \ unsigned old = ME2_PORT2_IO; \ if (val) \ ME2_PORT2_IO = old & ~0x2; \ else \ ME2_PORT2_IO = old | 0x2; \ } \ } while (0) #ifndef __ASSEMBLY__ extern void rte_me2_cb_init_irqs (void); #endif /* !__ASSEMBLY__ */ #endif /* __V850_RTE_ME2_CB_H__ */