/* * Header for MultiMediaCard (MMC) * * Copyright 2002 Hewlett-Packard Company * * Use consistent with the GNU GPL is permitted, * provided that this copyright notice is * preserved in its entirety in all copies and derived works. * * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS * FITNESS FOR ANY PARTICULAR PURPOSE. * * Many thanks to Alessandro Rubini and Jonathan Corbet! * * Based strongly on code by: * * Author: Yong-iL Joh <tolkien@mizi.com> * Date : $Date: 2002/06/18 12:37:30 $ * * Author: Andrew Christian * 15 May 2002 */ #ifndef MMC_MMC_PROTOCOL_H #define MMC_MMC_PROTOCOL_H /* Standard MMC commands (3.1) type argument response */ /* class 1 */ #define MMC_GO_IDLE_STATE 0 /* bc */ #define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */ #define MMC_ALL_SEND_CID 2 /* bcr R2 */ #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ #define MMC_SET_DSR 4 /* bc [31:16] RCA */ #define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ #define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */ #define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */ #define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ #define MMC_STOP_TRANSMISSION 12 /* ac R1b */ #define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */ #define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */ /* class 2 */ #define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */ #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ /* class 3 */ #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ /* class 4 */ #define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */ #define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */ #define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */ #define MMC_PROGRAM_CID 26 /* adtc R1 */ #define MMC_PROGRAM_CSD 27 /* adtc R1 */ /* class 6 */ #define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */ #define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */ #define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */ /* class 5 */ #define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */ #define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */ #define MMC_ERASE 37 /* ac R1b */ /* class 9 */ #define MMC_FAST_IO 39 /* ac <Complex> R4 */ #define MMC_GO_IRQ_STATE 40 /* bcr R5 */ /* class 7 */ #define MMC_LOCK_UNLOCK 42 /* adtc R1b */ /* class 8 */ #define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ #define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */ /* SD commands type argument response */ /* class 8 */ /* This is basically the same command as for MMC with some quirks. */ #define SD_SEND_RELATIVE_ADDR 3 /* ac R6 */ /* Application commands */ #define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ #define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */ #define SD_APP_SEND_SCR 51 /* adtc R1 */ /* MMC status in R1 Type e : error bit s : status bit r : detected and set for the actual command response x : detected and set during command execution. the host must poll the card by sending status command in order to read these bits. Clear condition a : according to the card state b : always related to the previous command. Reception of a valid command will clear it (with a delay of one command) c : clear by read */ #define R1_OUT_OF_RANGE (1 << 31) /* er, c */ #define R1_ADDRESS_ERROR (1 << 30) /* erx, c */ #define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */ #define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */ #define R1_ERASE_PARAM (1 << 27) /* ex, c */ #define R1_WP_VIOLATION (1 << 26) /* erx, c */ #define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */ #define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */ #define R1_COM_CRC_ERROR (1 << 23) /* er, b */ #define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */ #define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */ #define R1_CC_ERROR (1 << 20) /* erx, c */ #define R1_ERROR (1 << 19) /* erx, c */ #define R1_UNDERRUN (1 << 18) /* ex, c */ #define R1_OVERRUN (1 << 17) /* ex, c */ #define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */ #define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ #define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ #define R1_ERASE_RESET (1 << 13) /* sr, c */ #define R1_STATUS(x) (x & 0xFFFFE000) #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */ #define R1_APP_CMD (1 << 5) /* sr, c */ /* These are unpacked versions of the actual responses */ struct _mmc_csd { u8 csd_structure; u8 spec_vers; u8 taac; u8 nsac; u8 tran_speed; u16 ccc; u8 read_bl_len; u8 read_bl_partial; u8 write_blk_misalign; u8 read_blk_misalign; u8 dsr_imp; u16 c_size; u8 vdd_r_curr_min; u8 vdd_r_curr_max; u8 vdd_w_curr_min; u8 vdd_w_curr_max; u8 c_size_mult; union { struct { /* MMC system specification version 3.1 */ u8 erase_grp_size; u8 erase_grp_mult; } v31; struct { /* MMC system specification version 2.2 */ u8 sector_size; u8 erase_grp_size; } v22; } erase; u8 wp_grp_size; u8 wp_grp_enable; u8 default_ecc; u8 r2w_factor; u8 write_bl_len; u8 write_bl_partial; u8 file_format_grp; u8 copy; u8 perm_write_protect; u8 tmp_write_protect; u8 file_format; u8 ecc; }; #define MMC_VDD_145_150 0x00000001 /* VDD voltage 1.45 - 1.50 */ #define MMC_VDD_150_155 0x00000002 /* VDD voltage 1.50 - 1.55 */ #define MMC_VDD_155_160 0x00000004 /* VDD voltage 1.55 - 1.60 */ #define MMC_VDD_160_165 0x00000008 /* VDD voltage 1.60 - 1.65 */ #define MMC_VDD_165_170 0x00000010 /* VDD voltage 1.65 - 1.70 */ #define MMC_VDD_17_18 0x00000020 /* VDD voltage 1.7 - 1.8 */ #define MMC_VDD_18_19 0x00000040 /* VDD voltage 1.8 - 1.9 */ #define MMC_VDD_19_20 0x00000080 /* VDD voltage 1.9 - 2.0 */ #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ #define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ #define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ #define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ #define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ #define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ #define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ #define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ #define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ #define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ #define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ #define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ #define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */ /* * Card Command Classes (CCC) */ #define CCC_BASIC (1<<0) /* (0) Basic protocol functions */ /* (CMD0,1,2,3,4,7,9,10,12,13,15) */ #define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */ /* (CMD11) */ #define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */ /* (CMD16,17,18) */ #define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */ /* (CMD20) */ #define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */ /* (CMD16,24,25,26,27) */ #define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */ /* (CMD32,33,34,35,36,37,38,39) */ #define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */ /* (CMD28,29,30) */ #define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */ /* (CMD16,CMD42) */ #define CCC_APP_SPEC (1<<8) /* (8) Application specific */ /* (CMD55,56,57,ACMD*) */ #define CCC_IO_MODE (1<<9) /* (9) I/O mode */ /* (CMD5,39,40,52,53) */ #define CCC_SWITCH (1<<10) /* (10) High speed switch */ /* (CMD6,34,35,36,37,50) */ /* (11) Reserved */ /* (CMD?) */ /* * CSD field definitions */ #define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */ #define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */ #define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */ #define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */ #define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */ #define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */ #define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */ /* * SD bus widths */ #define SD_BUS_WIDTH_1 0 #define SD_BUS_WIDTH_4 2 #endif /* MMC_MMC_PROTOCOL_H */