1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
|
#ifndef AGNX_PHY_H_
#define AGNX_PHY_H_
#include "agnx.h"
/* Transmission Managment Registers */
#define AGNX_TXM_BASE 0x0000
#define AGNX_TXM_CTL 0x0000 /* control register */
#define AGNX_TXM_ETMF 0x0004 /* enable transmission management functions */
#define AGNX_TXM_TXTEMP 0x0008 /* transmission template */
#define AGNX_TXM_RETRYSTAID 0x000c /* Retry Station ID */
#define AGNX_TXM_TIMESTAMPLO 0x0010 /* Timestamp Lo */
#define AGNX_TXM_TIMESTAMPHI 0x0014 /* Timestamp Hi */
#define AGNX_TXM_TXDELAY 0x0018 /* tx delay */
#define AGNX_TXM_TBTTLO 0x0020 /* tbtt Lo */
#define AGNX_TXM_TBTTHI 0x0024 /* tbtt Hi */
#define AGNX_TXM_BEAINTER 0x0028 /* Beacon Interval */
#define AGNX_TXM_NAV 0x0030 /* NAV */
#define AGNX_TXM_CFPMDV 0x0034 /* CFP MDV */
#define AGNX_TXM_CFPERCNT 0x0038 /* CFP period count */
#define AGNX_TXM_PROBDELAY 0x003c /* probe delay */
#define AGNX_TXM_LISINTERCNT 0x0040 /* listen interval count */
#define AGNX_TXM_DTIMPERICNT 0x004c /* DTIM period count */
#define AGNX_TXM_BEACON_CTL 0x005c /* beacon control */
#define AGNX_TXM_SCHEMPCNT 0x007c /* schedule empty count */
#define AGNX_TXM_MAXTIMOUT 0x0084 /* max timeout exceed count */
#define AGNX_TXM_MAXCFPTIM 0x0088 /* max CF poll timeout count */
#define AGNX_TXM_MAXRXTIME 0x008c /* max RX timeout count */
#define AGNX_TXM_MAXACKTIM 0x0090 /* max ACK timeout count */
#define AGNX_TXM_DIF01 0x00a0 /* DIF 0-1 */
#define AGNX_TXM_DIF23 0x00a4 /* DIF 2-3 */
#define AGNX_TXM_DIF45 0x00a8 /* DIF 4-5 */
#define AGNX_TXM_DIF67 0x00ac /* DIF 6-7 */
#define AGNX_TXM_SIFSPIFS 0x00b0 /* SIFS/PIFS */
#define AGNX_TXM_TIFSEIFS 0x00b4 /* TIFS/EIFS */
#define AGNX_TXM_MAXCCACNTSLOT 0x00b8 /* max CCA count slot */
#define AGNX_TXM_SLOTLIMIT 0x00bc /* slot limit/1 msec limit */
#define AGNX_TXM_CFPOLLRXTIM 0x00f0 /* CF poll RX timeout count */
#define AGNX_TXM_CFACKT11B 0x00f4 /* CF ack timeout limit for 11b */
#define AGNX_TXM_CW0 0x0100 /* CW 0 */
#define AGNX_TXM_SLBEALIM0 0x0108 /* short/long beacon limit 0 */
#define AGNX_TXM_CW1 0x0120 /* CW 1 */
#define AGNX_TXM_SLBEALIM1 0x0128 /* short/long beacon limit 1 */
#define AGNX_TXM_CW2 0x0140 /* CW 2 */
#define AGNX_TXM_SLBEALIM2 0x0148 /* short/long beacon limit 2 */
#define AGNX_TXM_CW3 0x0160 /* CW 3 */
#define AGNX_TXM_SLBEALIM3 0x0168 /* short/long beacon limit 3 */
#define AGNX_TXM_CW4 0x0180 /* CW 4 */
#define AGNX_TXM_SLBEALIM4 0x0188 /* short/long beacon limit 4 */
#define AGNX_TXM_CW5 0x01a0 /* CW 5 */
#define AGNX_TXM_SLBEALIM5 0x01a8 /* short/long beacon limit 5 */
#define AGNX_TXM_CW6 0x01c0 /* CW 6 */
#define AGNX_TXM_SLBEALIM6 0x01c8 /* short/long beacon limit 6 */
#define AGNX_TXM_CW7 0x01e0 /* CW 7 */
#define AGNX_TXM_SLBEALIM7 0x01e8 /* short/long beacon limit 7 */
#define AGNX_TXM_BEACONTEMP 0x1000 /* beacon template */
#define AGNX_TXM_STAPOWTEMP 0x1a00 /* Station Power Template */
/* Receive Management Control Registers */
#define AGNX_RXM_BASE 0x2000
#define AGNX_RXM_REQRATE 0x2000 /* requested rate */
#define AGNX_RXM_MACHI 0x2004 /* first 4 bytes of mac address */
#define AGNX_RXM_MACLO 0x2008 /* last 2 bytes of mac address */
#define AGNX_RXM_BSSIDHI 0x200c /* bssid hi */
#define AGNX_RXM_BSSIDLO 0x2010 /* bssid lo */
#define AGNX_RXM_HASH_CMD_FLAG 0x2014 /* Flags for the RX Hash Command Default:0 */
#define AGNX_RXM_HASH_CMD_HIGH 0x2018 /* The High half of the Hash Command */
#define AGNX_RXM_HASH_CMD_LOW 0x201c /* The Low half of the Hash Command */
#define AGNX_RXM_ROUTAB 0x2020 /* routing table */
#define ROUTAB_SUBTYPE_SHIFT 24
#define ROUTAB_TYPE_SHIFT 28
#define ROUTAB_STATUS_SHIFT 30
#define ROUTAB_RW_SHIFT 31
#define ROUTAB_ROUTE_DROP 0xf00000 /* Drop */
#define ROUTAB_ROUTE_CPU 0x400000 /* CPU */
#define ROUTAB_ROUTE_ENCRY 0x500800 /* Encryption */
#define ROUTAB_ROUTE_RFP 0x800000 /* RFP */
#define ROUTAB_TYPE_MANAG 0x0 /* Management */
#define ROUTAB_TYPE_CTL 0x1 /* Control */
#define ROUTAB_TYPE_DATA 0x2 /* Data */
#define ROUTAB_SUBTYPE_DATA 0x0
#define ROUTAB_SUBTYPE_DATAACK 0x1
#define ROUTAB_SUBTYPE_DATAPOLL 0x2
#define ROUTAB_SUBTYPE_DATAPOLLACK 0x3
#define ROUTAB_SUBTYPE_NULL 0x4 /* NULL */
#define ROUTAB_SUBTYPE_NULLACK 0x5
#define ROUTAB_SUBTYPE_NULLPOLL 0x6
#define ROUTAB_SUBTYPE_NULLPOLLACK 0x7
#define ROUTAB_SUBTYPE_QOSDATA 0x8 /* QOS DATA */
#define ROUTAB_SUBTYPE_QOSDATAACK 0x9
#define ROUTAB_SUBTYPE_QOSDATAPOLL 0xa
#define ROUTAB_SUBTYPE_QOSDATAACKPOLL 0xb
#define ROUTAB_SUBTYPE_QOSNULL 0xc
#define ROUTAB_SUBTYPE_QOSNULLACK 0xd
#define ROUTAB_SUBTYPE_QOSNULLPOLL 0xe
#define ROUTAB_SUBTYPE_QOSNULLPOLLACK 0xf
#define AGNX_RXM_DELAY11 0x2024 /* delay 11(AB) */
#define AGNX_RXM_SOF_CNT 0x2028 /* SOF Count */
#define AGNX_RXM_FRAG_CNT 0x202c /* Fragment Count*/
#define AGNX_RXM_FCS_CNT 0x2030 /* FCS Count */
#define AGNX_RXM_BSSID_MISS_CNT 0x2034 /* BSSID Miss Count */
#define AGNX_RXM_PDU_ERR_CNT 0x2038 /* PDU Error Count */
#define AGNX_RXM_DEST_MISS_CNT 0x203C /* Destination Miss Count */
#define AGNX_RXM_DROP_CNT 0x2040 /* Drop Count */
#define AGNX_RXM_ABORT_CNT 0x2044 /* Abort Count */
#define AGNX_RXM_RELAY_CNT 0x2048 /* Relay Count */
#define AGNX_RXM_HASH_MISS_CNT 0x204c /* Hash Miss Count */
#define AGNX_RXM_SA_HI 0x2050 /* Address of received packet Hi */
#define AGNX_RXM_SA_LO 0x2054 /* Address of received packet Lo */
#define AGNX_RXM_HASH_DUMP_LST 0x2100 /* Contains Hash Data */
#define AGNX_RXM_HASH_DUMP_MST 0x2104 /* Contains Hash Data */
#define AGNX_RXM_HASH_DUMP_DATA 0x2108 /* The Station ID to dump */
/* Encryption Managment */
#define AGNX_ENCRY_BASE 0x2400
#define AGNX_ENCRY_WEPKEY0 0x2440 /* wep key #0 */
#define AGNX_ENCRY_WEPKEY1 0x2444 /* wep key #1 */
#define AGNX_ENCRY_WEPKEY2 0x2448 /* wep key #2 */
#define AGNX_ENCRY_WEPKEY3 0x244c /* wep key #3 */
#define AGNX_ENCRY_CCMRECTL 0x2460 /* ccm replay control */
/* Band Management Registers */
#define AGNX_BM_BASE 0x2c00
#define AGNX_BM_BMCTL 0x2c00 /* band management control */
#define AGNX_BM_TXWADDR 0x2c18 /* tx workqueue address start */
#define AGNX_BM_TXTOPEER 0x2c24 /* transmit to peers */
#define AGNX_BM_FPLHP 0x2c2c /* free pool list head pointer */
#define AGNX_BM_FPLTP 0x2c30 /* free pool list tail pointer */
#define AGNX_BM_FPCNT 0x2c34 /* free pool count */
#define AGNX_BM_CIPDUWCNT 0x2c38 /* card interface pdu workqueue count */
#define AGNX_BM_SPPDUWCNT 0x2c3c /* sp pdu workqueue count */
#define AGNX_BM_RFPPDUWCNT 0x2c40 /* rfp pdu workqueue count */
#define AGNX_BM_RHPPDUWCNT 0x2c44 /* rhp pdu workqueue count */
#define AGNX_BM_CIWQCTL 0x2c48 /* Card Interface WorkQueue Control */
#define AGNX_BM_CPUTXWCTL 0x2c50 /* cpu tx workqueue control */
#define AGNX_BM_CPURXWCTL 0x2c58 /* cpu rx workqueue control */
#define AGNX_BM_CPULWCTL 0x2c60 /* cpu low workqueue control */
#define AGNX_BM_CPUHWCTL 0x2c68 /* cpu high workqueue control */
#define AGNX_BM_SPTXWCTL 0x2c70 /* sp tx workqueue control */
#define AGNX_BM_SPRXWCTL 0x2c78 /* sp rx workqueue control */
#define AGNX_BM_RFPWCTL 0x2c80 /* RFP workqueue control */
#define AGNX_BM_MTSM 0x2c90 /* Multicast Transmit Station Mask */
/* Card Interface Registers (32bits) */
#define AGNX_CIR_BASE 0x3000
#define AGNX_CIR_BLKCTL 0x3000 /* block control*/
#define AGNX_STAT_TX 0x1
#define AGNX_STAT_RX 0x2
#define AGNX_STAT_X 0x4
/* Below two interrupt flags will be set by our but not CPU or the card */
#define AGNX_STAT_TXD 0x10
#define AGNX_STAT_TXM 0x20
#define AGNX_CIR_ADDRWIN 0x3004 /* Addressable Windows*/
#define AGNX_CIR_ENDIAN 0x3008 /* card endianness */
#define AGNX_CIR_SERIALITF 0x3020 /* serial interface */
#define AGNX_CIR_RXCFG 0x3040 /* receive config */
#define ENABLE_RX_INTERRUPT 0x20
#define RX_CACHE_LINE 0x8
/* the RX fragment length */
#define FRAG_LEN_256 0x0 /* 256B */
#define FRAG_LEN_512 0x1
#define FRAG_LEN_1024 0x2
#define FRAG_LEN_2048 0x3
#define FRAG_BE 0x10
#define AGNX_CIR_RXCTL 0x3050 /* receive control */
/* memory address, chipside */
#define AGNX_CIR_RXCMSTART 0x3054 /* receive client memory start */
#define AGNX_CIR_RXCMEND 0x3058 /* receive client memory end */
/* memory address, pci */
#define AGNX_CIR_RXHOSTADDR 0x3060 /* receive hostside address */
/* memory address, chipside */
#define AGNX_CIR_RXCLIADDR 0x3064 /* receive clientside address */
#define AGNX_CIR_RXDMACTL 0x3068 /* receive dma control */
#define AGNX_CIR_TXCFG 0x3080 /* transmit config */
#define AGNX_CIR_TXMCTL 0x3090 /* Transmit Management Control */
#define ENABLE_TX_INTERRUPT 0x20
#define TX_CACHE_LINE 0x8
#define AGNX_CIR_TXMSTART 0x3094 /* Transmit Management Start */
#define AGNX_CIR_TXMEND 0x3098 /* Transmit Management End */
#define AGNX_CIR_TXDCTL 0x30a0 /* transmit data control */
/* memeory address, chipset */
#define AGNX_CIR_TXDSTART 0x30a4 /* transmit data start */
#define AGNX_CIR_TXDEND 0x30a8 /* transmit data end */
#define AGNX_CIR_TXMHADDR 0x30b0 /* Transmit Management Hostside Address */
#define AGNX_CIR_TXMCADDR 0x30b4 /* Transmit Management Clientside Address */
#define AGNX_CIR_TXDMACTL 0x30b8 /* transmit dma control */
/* Power Managment Unit */
#define AGNX_PM_BASE 0x3c00
#define AGNX_PM_PMCTL 0x3c00 /* PM Control*/
#define AGNX_PM_MACMSW 0x3c08 /* MAC Manual Slow Work Enable */
#define AGNX_PM_RFCTL 0x3c0c /* RF Control */
#define AGNX_PM_PHYMW 0x3c14 /* Phy Mannal Work */
#define AGNX_PM_SOFTRST 0x3c18 /* PMU Soft Reset */
#define AGNX_PM_PLLCTL 0x3c1c /* PMU PLL control*/
#define AGNX_PM_TESTPHY 0x3c24 /* PMU Test Phy */
/* Interrupt Control interface */
#define AGNX_INT_BASE 0x4000
#define AGNX_INT_STAT 0x4000 /* interrupt status */
#define AGNX_INT_MASK 0x400c /* interrupt mask */
/* FIXME */
#define IRQ_TX_BEACON 0x1 /* TX Beacon */
#define IRQ_TX_RETRY 0x8 /* TX Retry Interrupt */
#define IRQ_TX_ACTIVITY 0x10 /* TX Activity */
#define IRQ_RX_ACTIVITY 0x20 /* RX Activity */
/* FIXME I guess that instead RX a none exist staion's packet or
the station hasn't been init */
#define IRQ_RX_X 0x40
#define IRQ_RX_Y 0x80 /* RX ? */
#define IRQ_RX_HASHHIT 0x100 /* RX Hash Hit */
#define IRQ_RX_FRAME 0x200 /* RX Frame */
#define IRQ_ERR_INT 0x400 /* Error Interrupt */
#define IRQ_TX_QUE_FULL 0x800 /* TX Workqueue Full */
#define IRQ_BANDMAN_ERR 0x10000 /* Bandwidth Management Error */
#define IRQ_TX_DISABLE 0x20000 /* TX Disable */
#define IRQ_RX_IVASESKEY 0x80000 /* RX Invalid Session Key */
#define IRQ_RX_KEYIDMIS 0x100000 /* RX key ID Mismatch */
#define IRQ_REP_THHIT 0x200000 /* Replay Threshold Hit */
#define IRQ_TIMER1 0x4000000 /* Timer1 */
#define IRQ_TIMER_CNT 0x10000000 /* Timer Count */
#define IRQ_PHY_FASTINT 0x20000000 /* Phy Fast Interrupt */
#define IRQ_PHY_SLOWINT 0x40000000 /* Phy Slow Interrupt */
#define IRQ_OTHER 0x80000000 /* Unknow interrupt */
#define AGNX_IRQ_ALL 0xffffffff
/* System Interface */
#define AGNX_SYSITF_BASE 0x4400
#define AGNX_SYSITF_SYSMODE 0x4400 /* system mode */
#define AGNX_SYSITF_GPIOIN 0x4410 /* GPIO In */
/* PIN lines for leds? */
#define AGNX_SYSITF_GPIOUT 0x4414 /* GPIO Out */
/* Timer Control */
#define AGNX_TIMCTL_TIMER1 0x4800 /* Timer 1 */
#define AGNX_TIMCTL_TIM1CTL 0x4808 /* Timer 1 Control */
/* Antenna Calibration Interface */
#define AGNX_ACI_BASE 0x5000
#define AGNX_ACI_MODE 0x5000 /* Mode */
#define AGNX_ACI_MEASURE 0x5004 /* Measure */
#define AGNX_ACI_SELCHAIN 0x5008 /* Select Chain */
#define AGNX_ACI_LEN 0x500c /* Length */
#define AGNX_ACI_TIMER1 0x5018 /* Timer 1 */
#define AGNX_ACI_TIMER2 0x501c /* Timer 2 */
#define AGNX_ACI_OFFSET 0x5020 /* Offset */
#define AGNX_ACI_STATUS 0x5030 /* Status */
#define CALI_IDLE 0x0
#define CALI_DONE 0x1
#define CALI_BUSY 0x2
#define CALI_ERR 0x3
#define AGNX_ACI_AICCHA0OVE 0x5034 /* AIC Channel 0 Override */
#define AGNX_ACI_AICCHA1OVE 0x5038 /* AIC Channel 1 Override */
/* Gain Control Registers */
#define AGNX_GCR_BASE 0x9000
/* threshold of primary antenna */
#define AGNX_GCR_THD0A 0x9000 /* threshold? D0 A */
/* low threshold of primary antenna */
#define AGNX_GCR_THD0AL 0x9004 /* threshold? D0 A low */
/* threshold of secondary antenna */
#define AGNX_GCR_THD0B 0x9008 /* threshold? D0_B */
#define AGNX_GCR_DUNSAT 0x900c /* d unsaturated */
#define AGNX_GCR_DSAT 0x9010 /* d saturated */
#define AGNX_GCR_DFIRCAL 0x9014 /* D Fir/Cal */
#define AGNX_GCR_DGCTL11A 0x9018 /* d gain control 11a */
#define AGNX_GCR_DGCTL11B 0x901c /* d gain control 11b */
/* strength of gain */
#define AGNX_GCR_GAININIT 0x9020 /* gain initialization */
#define AGNX_GCR_THNOSIG 0x9024 /* threhold no signal */
#define AGNX_GCR_COARSTEP 0x9028 /* coarse stepping */
#define AGNX_GCR_SIFST11A 0x902c /* sifx time 11a */
#define AGNX_GCR_SIFST11B 0x9030 /* sifx time 11b */
#define AGNX_GCR_CWDETEC 0x9034 /* cw detection */
#define AGNX_GCR_0X38 0x9038 /* ???? */
#define AGNX_GCR_BOACT 0x903c /* BO Active */
#define AGNX_GCR_BOINACT 0x9040 /* BO Inactive */
#define AGNX_GCR_BODYNA 0x9044 /* BO dynamic */
/* 802.11 mode(a,b,g) */
#define AGNX_GCR_DISCOVMOD 0x9048 /* discovery mode */
#define AGNX_GCR_NLISTANT 0x904c /* number of listening antenna */
#define AGNX_GCR_NACTIANT 0x9050 /* number of active antenna */
#define AGNX_GCR_NMEASANT 0x9054 /* number of measuring antenna */
#define AGNX_GCR_NCAPTANT 0x9058 /* number of capture antenna */
#define AGNX_GCR_THCAP11A 0x905c /* threshold capture 11a */
#define AGNX_GCR_THCAP11B 0x9060 /* threshold capture 11b */
#define AGNX_GCR_THCAPRX11A 0x9064 /* threshold capture rx 11a */
#define AGNX_GCR_THCAPRX11B 0x9068 /* threshold capture rx 11b */
#define AGNX_GCR_THLEVDRO 0x906c /* threshold level drop */
#define AGNX_GCR_GAINSET0 0x9070 /* Gainset 0 */
#define AGNX_GCR_GAINSET1 0x9074 /* Gainset 1 */
#define AGNX_GCR_GAINSET2 0x9078 /* Gainset 2 */
#define AGNX_GCR_MAXRXTIME11A 0x907c /* maximum rx time 11a */
#define AGNX_GCR_MAXRXTIME11B 0x9080 /* maximum rx time 11b */
#define AGNX_GCR_CORRTIME 0x9084 /* correction time */
/* reset the subsystem, 0 = disable, 1 = enable */
#define AGNX_GCR_RSTGCTL 0x9088 /* reset gain control */
/* channel receiving */
#define AGNX_GCR_RXCHANEL 0x908c /* receive channel */
#define AGNX_GCR_NOISE0 0x9090 /* Noise 0 */
#define AGNX_GCR_NOISE1 0x9094 /* Noise 1 */
#define AGNX_GCR_NOISE2 0x9098 /* Noise 2 */
#define AGNX_GCR_SIGHTH 0x909c /* Signal High Threshold */
#define AGNX_GCR_SIGLTH 0x90a0 /* Signal Low Threshold */
#define AGNX_GCR_CORRDROP 0x90a4 /* correction drop */
/* threshold of tertiay antenna */
#define AGNX_GCR_THCD 0x90a8 /* threshold? CD */
#define AGNX_GCR_THCS 0x90ac /* threshold? CS */
#define AGNX_GCR_MAXPOWDIFF 0x90b8 /* maximum power difference */
#define AGNX_GCR_TRACNT4 0x90ec /* Transition Count 4 */
#define AGNX_GCR_TRACNT5 0x90f0 /* transition count 5 */
#define AGNX_GCR_TRACNT6 0x90f4 /* transition count 6 */
#define AGNX_GCR_TRACNT7 0x90f8 /* transition coutn 7 */
#define AGNX_GCR_TESTBUS 0x911c /* test bus */
#define AGNX_GCR_CHAINNUM 0x9120 /* Number of Chains */
#define AGNX_GCR_ANTCFG 0x9124 /* Antenna Config */
#define AGNX_GCR_THJUMP 0x912c /* threhold jump */
#define AGNX_GCR_THPOWER 0x9130 /* threshold power */
#define AGNX_GCR_THPOWCLIP 0x9134 /* threshold power clip*/
#define AGNX_GCR_FORCECTLCLK 0x9138 /* Force Gain Control Clock */
#define AGNX_GCR_GAINSETWRITE 0x913c /* Gainset Write */
#define AGNX_GCR_THD0BTFEST 0x9140 /* threshold d0 b tf estimate */
#define AGNX_GCR_THRX11BPOWMIN 0x9144 /* threshold rx 11b power minimum */
#define AGNX_GCR_0X14c 0x914c /* ?? */
#define AGNX_GCR_0X150 0x9150 /* ?? */
#define AGNX_GCR_RXOVERIDE 0x9194 /* recieve override */
#define AGNX_GCR_WATCHDOG 0x91b0 /* watchdog timeout */
/* Spi Interface */
#define AGNX_SPI_BASE 0xdc00
#define AGNX_SPI_CFG 0xdc00 /* spi configuration */
/* Only accept 16 bits */
#define AGNX_SPI_WMSW 0xdc04 /* write most significant word */
/* Only accept 16 bits */
#define AGNX_SPI_WLSW 0xdc08 /* write least significant word */
#define AGNX_SPI_CTL 0xdc0c /* spi control */
#define AGNX_SPI_RMSW 0xdc10 /* read most significant word */
#define AGNX_SPI_RLSW 0xdc14 /* read least significant word */
/* SPI Control Mask */
#define SPI_READ_CTL 0x4000 /* read control */
#define SPI_BUSY_CTL 0x8000 /* busy control */
/* RF and synth chips in spi */
#define RF_CHIP0 0x400
#define RF_CHIP1 0x800
#define RF_CHIP2 0x1000
#define SYNTH_CHIP 0x2000
/* Unknown register */
#define AGNX_UNKNOWN_BASE 0x7800
/* FIXME MonitorGain */
#define AGNX_MONGCR_BASE 0x12000
/* Gain Table */
#define AGNX_GAIN_TABLE 0x12400
/* The initial FIR coefficient table */
#define AGNX_FIR_BASE 0x19804
#define AGNX_ENGINE_LOOKUP_TBL 0x800
/* eeprom commands */
#define EEPROM_CMD_NULL 0x0 /* NULL */
#define EEPROM_CMD_WRITE 0x2 /* write */
#define EEPROM_CMD_READ 0x3 /* read */
#define EEPROM_CMD_STATUSREAD 0x5 /* status register read */
#define EEPROM_CMD_WRITEENABLE 0x6 /* write enable */
#define EEPROM_CMD_CONFIGURE 0x7 /* configure */
#define EEPROM_DATAFORCOFIGURE 0x6 /* ??? */
/* eeprom address */
#define EEPROM_ADDR_SUBVID 0x0 /* Sub Vendor ID */
#define EEPROM_ADDR_SUBSID 0x2 /* Sub System ID */
#define EEPROM_ADDR_MACADDR 0x146 /* MAC Address */
#define EEPROM_ADDR_LOTYPE 0x14f /* LO type */
struct agnx_eeprom {
u8 data; /* date */
u16 address; /* address in EEPROM */
u8 cmd; /* command, unknown, status */
} __attribute__((__packed__));
#define AGNX_EEPROM_COMMAND_SHIFT 5
#define AGNX_EEPROM_COMMAND_STAT 0x01
void disable_receiver(struct agnx_priv *priv);
void enable_receiver(struct agnx_priv *priv);
u8 read_from_eeprom(struct agnx_priv *priv, u16 address);
void agnx_hw_init(struct agnx_priv *priv);
int agnx_hw_reset(struct agnx_priv *priv);
int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len);
void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid);
void enable_power_saving(struct agnx_priv *priv);
void disable_power_saving(struct agnx_priv *priv);
void calibrate_antenna_period(unsigned long data);
#endif /* AGNX_PHY_H_ */
|
