aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBjorn Helgaas <bjorn.helgaas@hp.com>2007-06-27 14:09:52 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-06-28 11:34:53 -0700
commit172d0496cd22c98ee2e4238821fa309c01685f3a (patch)
tree93f3be97047e4adcb3c1b87a9bd0f29aae80f50c
parent7c31d2f59c14191c3251f18ad1782fe6692f0c33 (diff)
PNP SMCf010 quirk: auto-config device if BIOS left it broken
Some HP firmware leaves the SMCf010 IRDA device incompletely configured, or reports the wrong resources in _CRS. As a workaround, when we find such a device, try to auto-configure the device. This ignores the _CRS data, picks a config from _PRS, and runs _SRS to configure the device. This makes smsc-ircc2 work correctly with PNP resources (with no preconfiguration!) on all the machines I tested. I think Windows does something like this by default for all devices, so we should consider doing the same thing in Linux. This patch addresses part of the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" It fixes smsc-ircc2 PNP device detection on HP nc6000, nc6220, nw8000, nw8240, and possibly other machines. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/pnp/quirks.c66
1 files changed, 48 insertions, 18 deletions
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index 277df50c89a..967a8e22b2d 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -107,31 +107,61 @@ static void quirk_sb16audio_resources(struct pnp_dev *dev)
return;
}
-static void quirk_smc_enable(struct pnp_dev *dev)
+static int quirk_smc_fir_enabled(struct pnp_dev *dev)
{
- unsigned int firbase;
+ unsigned long firbase;
+ u8 bank, high, low, chip;
+
+ if (!pnp_port_valid(dev, 1))
+ return 0;
+
+ firbase = pnp_port_start(dev, 1);
+
+ /* Select register bank 3 */
+ bank = inb(firbase + 7);
+ bank &= 0xf0;
+ bank |= 3;
+ outb(bank, firbase + 7);
+
+ high = inb(firbase + 0);
+ low = inb(firbase + 1);
+ chip = inb(firbase + 2);
+
+ /* This corresponds to the check in smsc_ircc_present() */
+ if (high == 0x10 && low == 0xb8 && (chip == 0xf1 || chip == 0xf2))
+ return 1;
+
+ return 0;
+}
- if (!dev->active || !pnp_port_valid(dev, 1))
+static void quirk_smc_enable(struct pnp_dev *dev)
+{
+ /*
+ * If the BIOS left the device disabled, or it is enabled and
+ * responding correctly, we're in good shape.
+ */
+ if (!dev->active || quirk_smc_fir_enabled(dev))
return;
/*
- * On the HP/Compaq nw8240 (and probably other similar machines),
- * there is an SMCF010 device with two I/O port regions:
- *
- * 0x3e8-0x3ef SIR
- * 0x100-0x10f FIR
+ * Sometimes the BIOS claims the device is enabled, but it reports
+ * the wrong FIR resources or doesn't properly configure ISA or LPC
+ * bridges on the way to the device.
*
- * _STA reports the device is enabled, but in fact, the BIOS
- * neglects to enable the FIR range. Fortunately, it does fully
- * enable the device if we call _SRS.
+ * HP nc6000 and nc8000/nw8000 laptops have known problems like
+ * this. Fortunately, they do fix things up if we auto-configure
+ * the device using its _PRS and _SRS methods.
*/
- firbase = pnp_port_start(dev, 1);
- if (inb(firbase + 0x7 /* IRCC_MASTER */) == 0xff) {
- pnp_err("%s (%s) enabled but not responding, disabling and "
- "re-enabling", dev->dev.bus_id, pnp_dev_name(dev));
- pnp_disable_dev(dev);
- pnp_activate_dev(dev);
- }
+ dev_err(&dev->dev, "%s device not responding, auto-configuring "
+ "resources\n", dev->id->id);
+
+ pnp_disable_dev(dev);
+ pnp_init_resource_table(&dev->res);
+ pnp_auto_config_dev(dev);
+ pnp_activate_dev(dev);
+
+ if (!quirk_smc_fir_enabled(dev))
+ dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\"\n");
}