aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-06-26 09:39:02 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-06-26 09:39:02 -0700
commit919a6d10fdd9e256dfcd31937fb0b18d1c066be6 (patch)
tree7bec333f70193007267601b4240684d43f3315bd
parentcf2acfb2051fc67804162eebc5ebc8f55d3b7e2c (diff)
parentfd0cca754f3f6756bfdafe500e4f49b1b9e9723f (diff)
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits) powerpc/rtas: Fix watchdog driver temperature read functionality powerpc/mm: Fix potential access to freed pages when using hugetlbfs powerpc/440: Fix warning early debug code powerpc/of: Fix usage of dev_set_name() in of_device_alloc() powerpc/pasemi: Use raw spinlock in SMP TB sync powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock powerpc/rtas: Turn rtas lock into a raw spinlock powerpc: Add irqtrace support for 32-bit powerpc powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel powerpc/BSR: add 4096 byte BSR size powerpc: Map more memory early on 601 processors powerpc/pmac: Fix DMA ops for MacIO devices powerpc/mm: Make k(un)map_atomic out of line powerpc: Fix mpic alloc warning powerpc: Fix output from show_regs powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP powerpc/amigaone: Limit ISA I/O range to 4k in the device tree powerpc/warp: Platform fix for i2c change powerpc: Have git ignore generated files from dtc compile powerpc/mpic: Fix mapping of "DCR" based MPIC variants ...
-rw-r--r--Documentation/powerpc/booting-without-of.txt1168
-rw-r--r--Documentation/powerpc/dts-bindings/4xx/emac.txt148
-rw-r--r--Documentation/powerpc/dts-bindings/gpio/gpio.txt50
-rw-r--r--Documentation/powerpc/dts-bindings/gpio/mdio.txt19
-rw-r--r--Documentation/powerpc/dts-bindings/marvell.txt521
-rw-r--r--Documentation/powerpc/dts-bindings/phy.txt25
-rw-r--r--Documentation/powerpc/dts-bindings/spi-bus.txt57
-rw-r--r--Documentation/powerpc/dts-bindings/usb-ehci.txt25
-rw-r--r--Documentation/powerpc/dts-bindings/xilinx.txt295
-rw-r--r--arch/powerpc/Kconfig1
-rw-r--r--arch/powerpc/boot/.gitignore10
-rw-r--r--arch/powerpc/boot/dts/amigaone.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8569mds.dts1
-rw-r--r--arch/powerpc/include/asm/cpm1.h2
-rw-r--r--arch/powerpc/include/asm/dma-mapping.h24
-rw-r--r--arch/powerpc/include/asm/highmem.h57
-rw-r--r--arch/powerpc/include/asm/hw_irq.h20
-rw-r--r--arch/powerpc/include/asm/pte-hash64-64k.h3
-rw-r--r--arch/powerpc/include/asm/rtas.h5
-rw-r--r--arch/powerpc/kernel/entry_32.S127
-rw-r--r--arch/powerpc/kernel/head_32.S17
-rw-r--r--arch/powerpc/kernel/of_device.c2
-rw-r--r--arch/powerpc/kernel/process.c2
-rw-r--r--arch/powerpc/kernel/rtas.c69
-rw-r--r--arch/powerpc/kernel/setup_32.c2
-rw-r--r--arch/powerpc/kernel/smp.c3
-rw-r--r--arch/powerpc/kernel/udbg_16550.c2
-rw-r--r--arch/powerpc/mm/Makefile1
-rw-r--r--arch/powerpc/mm/highmem.c77
-rw-r--r--arch/powerpc/platforms/44x/warp.c44
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c1
-rw-r--r--arch/powerpc/platforms/85xx/smp.c9
-rw-r--r--arch/powerpc/platforms/85xx/socrates.c6
-rw-r--r--arch/powerpc/platforms/85xx/xes_mpc85xx.c1
-rw-r--r--arch/powerpc/platforms/cell/smp.c30
-rw-r--r--arch/powerpc/platforms/chrp/smp.c33
-rw-r--r--arch/powerpc/platforms/pasemi/setup.c15
-rw-r--r--arch/powerpc/platforms/powermac/setup.c41
-rw-r--r--arch/powerpc/platforms/powermac/smp.c166
-rw-r--r--arch/powerpc/platforms/pseries/smp.c30
-rw-r--r--arch/powerpc/sysdev/mpic.c34
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c9
-rw-r--r--drivers/char/bsr.c42
-rw-r--r--drivers/macintosh/macio_asic.c11
-rw-r--r--drivers/watchdog/wdrtas.c8
-rw-r--r--scripts/dtc/.gitignore5
46 files changed, 1691 insertions, 1531 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 8d999d862d0..79f533f38c6 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1238,1122 +1238,7 @@ descriptions for the SOC devices for which new nodes have been
defined; this list will expand as more and more SOC-containing
platforms are moved over to use the flattened-device-tree model.
- a) PHY nodes
-
- Required properties:
-
- - device_type : Should be "ethernet-phy"
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
- - linux,phandle : phandle for this node; likely referenced by an
- ethernet controller node.
-
-
- Example:
-
- ethernet-phy@0 {
- linux,phandle = <2452000>
- interrupt-parent = <40000>;
- interrupts = <35 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
-
-
- b) Interrupt controllers
-
- Some SOC devices contain interrupt controllers that are different
- from the standard Open PIC specification. The SOC device nodes for
- these types of controllers should be specified just like a standard
- OpenPIC controller. Sense and level information should be encoded
- as specified in section 2) of this chapter for each device that
- specifies an interrupt.
-
- Example :
-
- pic@40000 {
- linux,phandle = <40000>;
- interrupt-controller;
- #address-cells = <0>;
- reg = <40000 40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- c) 4xx/Axon EMAC ethernet nodes
-
- The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
- the Axon bridge. To operate this needs to interact with a ths
- special McMAL DMA controller, and sometimes an RGMII or ZMII
- interface. In addition to the nodes and properties described
- below, the node for the OPB bus on which the EMAC sits must have a
- correct clock-frequency property.
-
- i) The EMAC node itself
-
- Required properties:
- - device_type : "network"
-
- - compatible : compatible list, contains 2 entries, first is
- "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
- 405gp, Axon) and second is either "ibm,emac" or
- "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
- "ibm,emac4"
- - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- - interrupt-parent : optional, if needed for interrupt mapping
- - reg : <registers mapping>
- - local-mac-address : 6 bytes, MAC address
- - mal-device : phandle of the associated McMAL node
- - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
- with this EMAC
- - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
- with this EMAC
- - cell-index : 1 cell, hardware index of the EMAC cell on a given
- ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
- each Axon chip)
- - max-frame-size : 1 cell, maximum frame size supported in bytes
- - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
- operations.
- For Axon, 2048
- - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
- operations.
- For Axon, 2048.
- - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
- thresholds).
- For Axon, 0x00000010
- - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
- in bytes.
- For Axon, 0x00000100 (I think ...)
- - phy-mode : string, mode of operations of the PHY interface.
- Supported values are: "mii", "rmii", "smii", "rgmii",
- "tbi", "gmii", rtbi", "sgmii".
- For Axon on CAB, it is "rgmii"
- - mdio-device : 1 cell, required iff using shared MDIO registers
- (440EP). phandle of the EMAC to use to drive the
- MDIO lines for the PHY used by this EMAC.
- - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
- the ZMII device node
- - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
- channel or 0xffffffff if ZMII is only used for MDIO.
- - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
- of the RGMII device node.
- For Axon: phandle of plb5/plb4/opb/rgmii
- - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
- RGMII channel is used by this EMAC.
- Fox Axon: present, whatever value is appropriate for each
- EMAC, that is the content of the current (bogus) "phy-port"
- property.
-
- Optional properties:
- - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
- a search is performed.
- - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
- for, used if phy-address is absent. bit 0x00000001 is
- MDIO address 0.
- For Axon it can be absent, though my current driver
- doesn't handle phy-address yet so for now, keep
- 0x00ffffff in it.
- - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
- operations (if absent the value is the same as
- rx-fifo-size). For Axon, either absent or 2048.
- - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
- operations (if absent the value is the same as
- tx-fifo-size). For Axon, either absent or 2048.
- - tah-device : 1 cell, optional. If connected to a TAH engine for
- offload, phandle of the TAH device node.
- - tah-channel : 1 cell, optional. If appropriate, channel used on the
- TAH engine.
-
- Example:
-
- EMAC0: ethernet@40000800 {
- device_type = "network";
- compatible = "ibm,emac-440gp", "ibm,emac";
- interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <40000800 70>;
- local-mac-address = [00 04 AC E3 1B 1E];
- mal-device = <&MAL0>;
- mal-tx-channel = <0 1>;
- mal-rx-channel = <0>;
- cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
- phy-mode = "rmii";
- phy-map = <00000001>;
- zmii-device = <&ZMII0>;
- zmii-channel = <0>;
- };
-
- ii) McMAL node
-
- Required properties:
- - device_type : "dma-controller"
- - compatible : compatible list, containing 2 entries, first is
- "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
- emac) and the second is either "ibm,mcmal" or
- "ibm,mcmal2".
- For Axon, "ibm,mcmal-axon","ibm,mcmal2"
- - interrupts : <interrupt mapping for the MAL interrupts sources:
- 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
- For Axon: This is _different_ from the current
- firmware. We use the "delayed" interrupts for txeob
- and rxeob. Thus we end up with mapping those 5 MPIC
- interrupts, all level positive sensitive: 10, 11, 32,
- 33, 34 (in decimal)
- - dcr-reg : < DCR registers range >
- - dcr-parent : if needed for dcr-reg
- - num-tx-chans : 1 cell, number of Tx channels
- - num-rx-chans : 1 cell, number of Rx channels
-
- iii) ZMII node
-
- Required properties:
- - compatible : compatible list, containing 2 entries, first is
- "ibm,zmii-CHIP" where CHIP is the host ASIC (like
- EMAC) and the second is "ibm,zmii".
- For Axon, there is no ZMII node.
- - reg : <registers mapping>
-
- iv) RGMII node
-
- Required properties:
- - compatible : compatible list, containing 2 entries, first is
- "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
- EMAC) and the second is "ibm,rgmii".
- For Axon, "ibm,rgmii-axon","ibm,rgmii"
- - reg : <registers mapping>
- - revision : as provided by the RGMII new version register if
- available.
- For Axon: 0x0000012a
-
- d) Xilinx IP cores
-
- The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
- in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
- of standard device types (network, serial, etc.) and miscellaneous
- devices (gpio, LCD, spi, etc). Also, since these devices are
- implemented within the fpga fabric every instance of the device can be
- synthesised with different options that change the behaviour.
-
- Each IP-core has a set of parameters which the FPGA designer can use to
- control how the core is synthesized. Historically, the EDK tool would
- extract the device parameters relevant to device drivers and copy them
- into an 'xparameters.h' in the form of #define symbols. This tells the
- device drivers how the IP cores are configured, but it requres the kernel
- to be recompiled every time the FPGA bitstream is resynthesized.
-
- The new approach is to export the parameters into the device tree and
- generate a new device tree each time the FPGA bitstream changes. The
- parameters which used to be exported as #defines will now become
- properties of the device node. In general, device nodes for IP-cores
- will take the following form:
-
- (name): (generic-name)@(base-address) {
- compatible = "xlnx,(ip-core-name)-(HW_VER)"
- [, (list of compatible devices), ...];
- reg = <(baseaddr) (size)>;
- interrupt-parent = <&interrupt-controller-phandle>;
- interrupts = < ... >;
- xlnx,(parameter1) = "(string-value)";
- xlnx,(parameter2) = <(int-value)>;
- };
-
- (generic-name): an open firmware-style name that describes the
- generic class of device. Preferably, this is one word, such
- as 'serial' or 'ethernet'.
- (ip-core-name): the name of the ip block (given after the BEGIN
- directive in system.mhs). Should be in lowercase
- and all underscores '_' converted to dashes '-'.
- (name): is derived from the "PARAMETER INSTANCE" value.
- (parameter#): C_* parameters from system.mhs. The C_ prefix is
- dropped from the parameter name, the name is converted
- to lowercase and all underscore '_' characters are
- converted to dashes '-'.
- (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
- (HW_VER): from the HW_VER parameter.
- (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
-
- Typically, the compatible list will include the exact IP core version
- followed by an older IP core version which implements the same
- interface or any other device with the same interface.
-
- 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
-
- For example, the following block from system.mhs:
-
- BEGIN opb_uartlite
- PARAMETER INSTANCE = opb_uartlite_0
- PARAMETER HW_VER = 1.00.b
- PARAMETER C_BAUDRATE = 115200
- PARAMETER C_DATA_BITS = 8
- PARAMETER C_ODD_PARITY = 0
- PARAMETER C_USE_PARITY = 0
- PARAMETER C_CLK_FREQ = 50000000
- PARAMETER C_BASEADDR = 0xEC100000
- PARAMETER C_HIGHADDR = 0xEC10FFFF
- BUS_INTERFACE SOPB = opb_7
- PORT OPB_Clk = CLK_50MHz
- PORT Interrupt = opb_uartlite_0_Interrupt
- PORT RX = opb_uartlite_0_RX
- PORT TX = opb_uartlite_0_TX
- PORT OPB_Rst = sys_bus_reset_0
- END
-
- becomes the following device tree node:
-
- opb_uartlite_0: serial@ec100000 {
- device_type = "serial";
- compatible = "xlnx,opb-uartlite-1.00.b";
- reg = <ec100000 10000>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <1 0>; // got this from the opb_intc parameters
- current-speed = <d#115200>; // standard serial device prop
- clock-frequency = <d#50000000>; // standard serial device prop
- xlnx,data-bits = <8>;
- xlnx,odd-parity = <0>;
- xlnx,use-parity = <0>;
- };
-
- Some IP cores actually implement 2 or more logical devices. In
- this case, the device should still describe the whole IP core with
- a single node and add a child node for each logical device. The
- ranges property can be used to translate from parent IP-core to the
- registers of each device. In addition, the parent node should be
- compatible with the bus type 'xlnx,compound', and should contain
- #address-cells and #size-cells, as with any other bus. (Note: this
- makes the assumption that both logical devices have the same bus
- binding. If this is not true, then separate nodes should be used
- for each logical device). The 'cell-index' property can be used to
- enumerate logical devices within an IP core. For example, the
- following is the system.mhs entry for the dual ps2 controller found
- on the ml403 reference design.
-
- BEGIN opb_ps2_dual_ref
- PARAMETER INSTANCE = opb_ps2_dual_ref_0
- PARAMETER HW_VER = 1.00.a
- PARAMETER C_BASEADDR = 0xA9000000
- PARAMETER C_HIGHADDR = 0xA9001FFF
- BUS_INTERFACE SOPB = opb_v20_0
- PORT Sys_Intr1 = ps2_1_intr
- PORT Sys_Intr2 = ps2_2_intr
- PORT Clkin1 = ps2_clk_rx_1
- PORT Clkin2 = ps2_clk_rx_2
- PORT Clkpd1 = ps2_clk_tx_1
- PORT Clkpd2 = ps2_clk_tx_2
- PORT Rx1 = ps2_d_rx_1
- PORT Rx2 = ps2_d_rx_2
- PORT Txpd1 = ps2_d_tx_1
- PORT Txpd2 = ps2_d_tx_2
- END
-
- It would result in the following device tree nodes:
-
- opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,compound";
- ranges = <0 a9000000 2000>;
- // If this device had extra parameters, then they would
- // go here.
- ps2@0 {
- compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
- reg = <0 40>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <3 0>;
- cell-index = <0>;
- };
- ps2@1000 {
- compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
- reg = <1000 40>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <3 0>;
- cell-index = <0>;
- };
- };
-
- Also, the system.mhs file defines bus attachments from the processor
- to the devices. The device tree structure should reflect the bus
- attachments. Again an example; this system.mhs fragment:
-
- BEGIN ppc405_virtex4
- PARAMETER INSTANCE = ppc405_0
- PARAMETER HW_VER = 1.01.a
- BUS_INTERFACE DPLB = plb_v34_0
- BUS_INTERFACE IPLB = plb_v34_0
- END
-
- BEGIN opb_intc
- PARAMETER INSTANCE = opb_intc_0
- PARAMETER HW_VER = 1.00.c
- PARAMETER C_BASEADDR = 0xD1000FC0
- PARAMETER C_HIGHADDR = 0xD1000FDF
- BUS_INTERFACE SOPB = opb_v20_0
- END
-
- BEGIN opb_uart16550
- PARAMETER INSTANCE = opb_uart16550_0
- PARAMETER HW_VER = 1.00.d
- PARAMETER C_BASEADDR = 0xa0000000
- PARAMETER C_HIGHADDR = 0xa0001FFF
- BUS_INTERFACE SOPB = opb_v20_0
- END
-
- BEGIN plb_v34
- PARAMETER INSTANCE = plb_v34_0
- PARAMETER HW_VER = 1.02.a
- END
-
- BEGIN plb_bram_if_cntlr
- PARAMETER INSTANCE = plb_bram_if_cntlr_0
- PARAMETER HW_VER = 1.00.b
- PARAMETER C_BASEADDR = 0xFFFF0000
- PARAMETER C_HIGHADDR = 0xFFFFFFFF
- BUS_INTERFACE SPLB = plb_v34_0
- END
-
- BEGIN plb2opb_bridge
- PARAMETER INSTANCE = plb2opb_bridge_0
- PARAMETER HW_VER = 1.01.a
- PARAMETER C_RNG0_BASEADDR = 0x20000000
- PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
- PARAMETER C_RNG1_BASEADDR = 0x60000000
- PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
- PARAMETER C_RNG2_BASEADDR = 0x80000000
- PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
- PARAMETER C_RNG3_BASEADDR = 0xC0000000
- PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
- BUS_INTERFACE SPLB = plb_v34_0
- BUS_INTERFACE MOPB = opb_v20_0
- END
-
- Gives this device tree (some properties removed for clarity):
-
- plb@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,plb-v34-1.02.a";
- device_type = "ibm,plb";
- ranges; // 1:1 translation
-
- plb_bram_if_cntrl_0: bram@ffff0000 {
- reg = <ffff0000 10000>;
- }
-
- opb@20000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <20000000 20000000 20000000
- 60000000 60000000 20000000
- 80000000 80000000 40000000
- c0000000 c0000000 20000000>;
-
- opb_uart16550_0: serial@a0000000 {
- reg = <a00000000 2000>;
- };
-
- opb_intc_0: interrupt-controller@d1000fc0 {
- reg = <d1000fc0 20>;
- };
- };
- };
-
- That covers the general approach to binding xilinx IP cores into the
- device tree. The following are bindings for specific devices:
-
- i) Xilinx ML300 Framebuffer
-
- Simple framebuffer device from the ML300 reference design (also on the
- ML403 reference design as well as others).
-
- Optional properties:
- - resolution = <xres yres> : pixel resolution of framebuffer. Some
- implementations use a different resolution.
- Default is <d#640 d#480>
- - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
- Default is <d#1024 d#480>.
- - rotate-display (empty) : rotate display 180 degrees.
-
- ii) Xilinx SystemACE
-
- The Xilinx SystemACE device is used to program FPGAs from an FPGA
- bitstream stored on a CF card. It can also be used as a generic CF
- interface device.
-
- Optional properties:
- - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
- iii) Xilinx EMAC and Xilinx TEMAC
-
- Xilinx Ethernet devices. In addition to general xilinx properties
- listed above, nodes for these devices should include a phy-handle
- property, and may include other common network device properties
- like local-mac-address.
-
- iv) Xilinx Uartlite
-
- Xilinx uartlite devices are simple fixed speed serial ports.
-
- Required properties:
- - current-speed : Baud rate of uartlite
-
- v) Xilinx hwicap
-
- Xilinx hwicap devices provide access to the configuration logic
- of the FPGA through the Internal Configuration Access Port
- (ICAP). The ICAP enables partial reconfiguration of the FPGA,
- readback of the configuration information, and some control over
- 'warm boots' of the FPGA fabric.
-
- Required properties:
- - xlnx,family : The family of the FPGA, necessary since the
- capabilities of the underlying ICAP hardware
- differ between different families. May be
- 'virtex2p', 'virtex4', or 'virtex5'.
-
- vi) Xilinx Uart 16550
-
- Xilinx UART 16550 devices are very similar to the NS16550 but with
- different register spacing and an offset from the base address.
-
- Required properties:
- - clock-frequency : Frequency of the clock input
- - reg-offset : A value of 3 is required
- - reg-shift : A value of 2 is required
-
- e) USB EHCI controllers
-
- Required properties:
- - compatible : should be "usb-ehci".
- - reg : should contain at least address and length of the standard EHCI
- register set for the device. Optional platform-dependent registers
- (debug-port or other) can be also specified here, but only after
- definition of standard EHCI registers.
- - interrupts : one EHCI interrupt should be described here.
- If device registers are implemented in big endian mode, the device
- node should have "big-endian-regs" property.
- If controller implementation operates with big endian descriptors,
- "big-endian-desc" property should be specified.
- If both big endian registers and descriptors are used by the controller
- implementation, "big-endian" property can be specified instead of having
- both "big-endian-regs" and "big-endian-desc".
-
- Example (Sequoia 440EPx):
- ehci@e0000300 {
- compatible = "ibm,usb-ehci-440epx", "usb-ehci";
- interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
- reg = <0 e0000300 90 0 e0000390 70>;
- big-endian;
- };
-
- f) MDIO on GPIOs
-
- Currently defined compatibles:
- - virtual,gpio-mdio
-
- MDC and MDIO lines connected to GPIO controllers are listed in the
- gpios property as described in section VIII.1 in the following order:
-
- MDC, MDIO.
-
- Example:
-
- mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qe_pio_a 11
- &qe_pio_c 6>;
- };
-
- g) SPI (Serial Peripheral Interface) busses
-
- SPI busses can be described with a node for the SPI master device
- and a set of child nodes for each SPI slave on the bus. For this
- discussion, it is assumed that the system's SPI controller is in
- SPI master mode. This binding does not describe SPI controllers
- in slave mode.
-
- The SPI master node requires the following properties:
- - #address-cells - number of cells required to define a chip select
- address on the SPI bus.
- - #size-cells - should be zero.
- - compatible - name of SPI bus controller following generic names
- recommended practice.
- No other properties are required in the SPI bus node. It is assumed
- that a driver for an SPI bus device will understand that it is an SPI bus.
- However, the binding does not attempt to define the specific method for
- assigning chip select numbers. Since SPI chip select configuration is
- flexible and non-standardized, it is left out of this binding with the
- assumption that board specific platform code will be used to manage
- chip selects. Individual drivers can define additional properties to
- support describing the chip select layout.
-
- SPI slave nodes must be children of the SPI master node and can
- contain the following properties.
- - reg - (required) chip select address of device.
- - compatible - (required) name of SPI device following generic names
- recommended practice
- - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
- - spi-cpol - (optional) Empty property indicating device requires
- inverse clock polarity (CPOL) mode
- - spi-cpha - (optional) Empty property indicating device requires
- shifted clock phase (CPHA) mode
- - spi-cs-high - (optional) Empty property indicating device requires
- chip select active high
-
- SPI example for an MPC5200 SPI bus:
- spi@f00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
-
- ethernet-switch@0 {
- compatible = "micrel,ks8995m";
- spi-max-frequency = <1000000>;
- reg = <0>;
- };
-
- codec@1 {
- compatible = "ti,tlv320aic26";
- spi-max-frequency = <100000>;
- reg = <1>;
- };
- };
-
-VII - Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system. In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains. Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
- This node is used to represent the system-controller and must be
- present when the system uses a system controller chip. The top-level
- system-controller node contains information that is global to all
- devices within the system controller chip. The node name begins
- with "system-controller" followed by the unit address, which is
- the base address of the memory-mapped register set for the system
- controller chip.
-
- Required properties:
-
- - ranges : Describes the translation of system controller addresses
- for memory mapped registers.
- - clock-frequency: Contains the main clock frequency for the system
- controller chip.
- - reg : This property defines the address and size of the
- memory-mapped registers contained within the system controller
- chip. The address specified in the "reg" property should match
- the unit address of the system-controller node.
- - #address-cells : Address representation for system controller
- devices. This field represents the number of cells needed to
- represent the address of the memory-mapped registers of devices
- within the system controller chip.
- - #size-cells : Size representation for for the memory-mapped
- registers within the system controller chip.
- - #interrupt-cells : Defines the width of cells used to represent
- interrupts.
-
- Optional properties:
-
- - model : The specific model of the system controller chip. Such
- as, "mv64360", "mv64460", or "mv64560".
- - compatible : A string identifying the compatibility identifiers
- of the system controller chip.
-
- The system-controller node contains child nodes for each system
- controller device that the platform uses. Nodes should not be created
- for devices which exist on the system controller chip but are not used
-
- Example Marvell Discovery mv64360 system-controller node:
-
- system-controller@f1000000 { /* Marvell Discovery mv64360 */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64360"; /* Default */
- compatible = "marvell,mv64360";
- clock-frequency = <133333333>;
- reg = <0xf1000000 0x10000>;
- virtual-reg = <0xf1000000>;
- ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
- 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
- 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
- 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
- [ child node definitions... ]
- }
-
-2) Child nodes of /system-controller
-
- a) Marvell Discovery MDIO bus
-
- The MDIO is a bus to which the PHY devices are connected. For each
- device that exists on this bus, a child node should be created. See
- the definition of the PHY node below for an example of how to define
- a PHY.
-
- Required properties:
- - #address-cells : Should be <1>
- - #size-cells : Should be <0>
- - device_type : Should be "mdio"
- - compatible : Should be "marvell,mv64360-mdio"
-
- Example:
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- device_type = "mdio";
- compatible = "marvell,mv64360-mdio";
-
- ethernet-phy@0 {
- ......
- };
- };
-
-
- b) Marvell Discovery ethernet controller
-
- The Discover ethernet controller is described with two levels
- of nodes. The first level describes an ethernet silicon block
- and the second level describes up to 3 ethernet nodes within
- that block. The reason for the multiple levels is that the
- registers for the node are interleaved within a single set
- of registers. The "ethernet-block" level describes the
- shared register set, and the "ethernet" nodes describe ethernet
- port-specific properties.
-
- Ethernet block node
-
- Required properties:
- - #address-cells : <1>
- - #size-cells : <0>
- - compatible : "marvell,mv64360-eth-block"
- - reg : Offset and length of the register set for this block
-
- Example Discovery Ethernet block node:
- ethernet-block@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-block";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- .......
- };
- };
-
- Ethernet port node
-
- Required properties:
- - device_type : Should be "network".
- - compatible : Should be "marvell,mv64360-eth".
- - reg : Should be <0>, <1>, or <2>, according to which registers
- within the silicon block the device uses.
- - interrupts : <a> where a is the interrupt number for the port.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
- - phy : the phandle for the PHY connected to this ethernet
- controller.
- - local-mac-address : 6 bytes, MAC address
-
- Example Discovery Ethernet port node:
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
-
-
-
- c) Marvell Discovery PHY nodes
-
- Required properties:
- - device_type : Should be "ethernet-phy"
- - interrupts : <a> where a is the interrupt number for this phy.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
-
- Example Discovery PHY node:
- ethernet-phy@1 {
- device_type = "ethernet-phy";
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
-
-
- d) Marvell Discovery SDMA nodes
-
- Represent DMA hardware associated with the MPSC (multiprotocol
- serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-sdma"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the DMA
- device.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SDMA node:
- sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xf1004000>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
-
- e) Marvell Discovery BRG nodes
-
- Represent baud rate generator hardware associated with the MPSC
- (multiprotocol serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-brg"
- - reg : Offset and length of the register set for this device
- - clock-src : A value from 0 to 15 which selects the clock
- source for the baud rate generator. This value corresponds
- to the CLKS value in the BRGx configuration register. See
- the mv64x60 User's Manual.
- - clock-frequence : The frequency (in Hz) of the baud rate
- generator's input clock.
- - current-speed : The current speed setting (presumably by
- firmware) of the baud rate generator.
-
- Example Discovery BRG node:
- brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
-
- f) Marvell Discovery CUNIT nodes
-
- Represent the Serial Communications Unit device hardware.
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
-
- g) Marvell Discovery MPSCROUTING nodes
-
- Represent the Discovery's MPSC routing hardware
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- mpscrouting@b500 {
- reg = <0xb400 0xc>;
- };
-
-
- h) Marvell Discovery MPSCINTR nodes
-
- Represent the Discovery's MPSC DMA interrupt hardware registers
- (SDMA cause and mask registers).
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPSCINTR node:
- mpsintr@b800 {
- reg = <0xb800 0x100>;
- };
-
-
- i) Marvell Discovery MPSC nodes
-
- Represent the Discovery's MPSC (Multiprotocol Serial Controller)
- serial port.
-
- Required properties:
- - device_type : "serial"
- - compatible : "marvell,mv64360-mpsc"
- - reg : Offset and length of the register set for this device
- - sdma : the phandle for the SDMA node used by this port
- - brg : the phandle for the BRG node used by this port
- - cunit : the phandle for the CUNIT node used by this port
- - mpscrouting : the phandle for the MPSCROUTING node used by this port
- - mpscintr : the phandle for the MPSCINTR node used by this port
- - cell-index : the hardware index of this cell in the MPSC core
- - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
- register
- - interrupts : <a> where a is the interrupt number for the MPSC.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery MPSCINTR node:
- mpsc@8000 {
- device_type = "serial";
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xf1008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- max_idle = <40>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
-
- j) Marvell Discovery Watch Dog Timer nodes
-
- Represent the Discovery's watchdog timer hardware
-
- Required properties:
- - compatible : "marvell,mv64360-wdt"
- - reg : Offset and length of the register set for this device
-
- Example Discovery Watch Dog Timer node:
- wdt@b410 {
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
-
- k) Marvell Discovery I2C nodes
-
- Represent the Discovery's I2C hardware
-
- Required properties:
- - device_type : "i2c"
- - compatible : "marvell,mv64360-i2c"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the I2C.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery I2C node:
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xf100c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
-
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
- Represent the Discovery's PIC hardware
-
- Required properties:
- - #interrupt-cells : <1>
- - #address-cells : <0>
- - compatible : "marvell,mv64360-pic"
- - reg : Offset and length of the register set for this device
- - interrupt-controller
-
- Example Discovery PIC node:
- pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0 0x88>;
- interrupt-controller;
- };
-
-
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
- Represent the Discovery's MPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-mpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPP node:
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
-
- n) Marvell Discovery GPP (General Purpose Pins) nodes
-
- Represent the Discovery's GPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-gpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery GPP node:
- gpp@f000 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
-
- o) Marvell Discovery PCI host bridge node
-
- Represents the Discovery's PCI host bridge device. The properties
- for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
- 1275-1994. A typical value for the compatible property is
- "marvell,mv64360-pci".
-
- Example Discovery PCI host bridge node
- pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0xcf8 0x8>;
- ranges = <0x01000000 0x0 0x0
- 0x88000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000
- 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0a */
- 0x5000 0 0 1 &PIC 80
- 0x5000 0 0 2 &PIC 81
- 0x5000 0 0 3 &PIC 91
- 0x5000 0 0 4 &PIC 93
-
- /* IDSEL 0x0b */
- 0x5800 0 0 1 &PIC 91
- 0x5800 0 0 2 &PIC 93
- 0x5800 0 0 3 &PIC 80
- 0x5800 0 0 4 &PIC 81
-
- /* IDSEL 0x0c */
- 0x6000 0 0 1 &PIC 91
- 0x6000 0 0 2 &PIC 93
- 0x6000 0 0 3 &PIC 80
- 0x6000 0 0 4 &PIC 81
-
- /* IDSEL 0x0d */
- 0x6800 0 0 1 &PIC 93
- 0x6800 0 0 2 &PIC 80
- 0x6800 0 0 3 &PIC 81
- 0x6800 0 0 4 &PIC 91
- >;
- };
-
-
- p) Marvell Discovery CPU Error nodes
-
- Represent the Discovery's CPU error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-cpu-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery CPU Error node:
- cpu-error@0070 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x70 0x10 0x128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
-
- q) Marvell Discovery SRAM Controller nodes
-
- Represent the Discovery's SRAM controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-sram-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SRAM Controller node:
- sram-ctrl@0380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
-
- r) Marvell Discovery PCI Error Handler nodes
-
- Represent the Discovery's PCI error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-pci-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery PCI Error Handler node:
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0xc28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
-
- s) Marvell Discovery Memory Controller nodes
-
- Represent the Discovery's memory controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-mem-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery Memory Controller node:
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
-
-
-VIII - Specifying interrupt information for devices
+VII - Specifying interrupt information for devices
===================================================
The device tree represents the busses and devices of a hardware
@@ -2439,56 +1324,7 @@ encodings listed below:
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
-IX - Specifying GPIO information for devices
-============================================
-
-1) gpios property
------------------
-
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
- &gpio-controller2-phandle gpio2-specifier
- 0 /* holes are permitted, means no GPIO 3 */
- &gpio-controller4-phandle gpio4-specifier
- ...>;
-
-Note that gpio-specifier length is controller dependent.
-
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
-
-Example of the node using GPIOs:
-
- node {
- gpios = <&qe_pio_e 18 0>;
- };
-
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
-
-2) gpio-controller nodes
-------------------------
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-Example of two SOC GPIO banks defined as gpio-controller nodes:
-
- qe_pio_a: gpio-controller@1400 {
- #gpio-cells = <2>;
- compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
- reg = <0x1400 0x18>;
- gpio-controller;
- };
-
- qe_pio_e: gpio-controller@1460 {
- #gpio-cells = <2>;
- compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
- reg = <0x1460 0x18>;
- gpio-controller;
- };
-
-X - Specifying Device Power Management Information (sleep property)
+VIII - Specifying Device Power Management Information (sleep property)
===================================================================
Devices on SOCs often have mechanisms for placing devices into low-power
diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt
new file mode 100644
index 00000000000..2161334a7ca
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/emac.txt
@@ -0,0 +1,148 @@
+ 4xx/Axon EMAC ethernet nodes
+
+ The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+ the Axon bridge. To operate this needs to interact with a ths
+ special McMAL DMA controller, and sometimes an RGMII or ZMII
+ interface. In addition to the nodes and properties described
+ below, the node for the OPB bus on which the EMAC sits must have a
+ correct clock-frequency property.
+
+ i) The EMAC node itself
+
+ Required properties:
+ - device_type : "network"
+
+ - compatible : compatible list, contains 2 entries, first is
+ "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+ 405gp, Axon) and second is either "ibm,emac" or
+ "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
+ "ibm,emac4"
+ - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
+ - interrupt-parent : optional, if needed for interrupt mapping
+ - reg : <registers mapping>
+ - local-mac-address : 6 bytes, MAC address
+ - mal-device : phandle of the associated McMAL node
+ - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
+ with this EMAC
+ - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
+ with this EMAC
+ - cell-index : 1 cell, hardware index of the EMAC cell on a given
+ ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+ each Axon chip)
+ - max-frame-size : 1 cell, maximum frame size supported in bytes
+ - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048
+ - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048.
+ - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
+ thresholds).
+ For Axon, 0x00000010
+ - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
+ in bytes.
+ For Axon, 0x00000100 (I think ...)
+ - phy-mode : string, mode of operations of the PHY interface.
+ Supported values are: "mii", "rmii", "smii", "rgmii",
+ "tbi", "gmii", rtbi", "sgmii".
+ For Axon on CAB, it is "rgmii"
+ - mdio-device : 1 cell, required iff using shared MDIO registers
+ (440EP). phandle of the EMAC to use to drive the
+ MDIO lines for the PHY used by this EMAC.
+ - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
+ the ZMII device node
+ - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
+ channel or 0xffffffff if ZMII is only used for MDIO.
+ - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
+ of the RGMII device node.
+ For Axon: phandle of plb5/plb4/opb/rgmii
+ - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
+ RGMII channel is used by this EMAC.
+ Fox Axon: present, whatever value is appropriate for each
+ EMAC, that is the content of the current (bogus) "phy-port"
+ property.
+
+ Optional properties:
+ - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
+ a search is performed.
+ - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
+ for, used if phy-address is absent. bit 0x00000001 is
+ MDIO address 0.
+ For Axon it can be absent, though my current driver
+ doesn't handle phy-address yet so for now, keep
+ 0x00ffffff in it.
+ - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ rx-fifo-size). For Axon, either absent or 2048.
+ - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ tx-fifo-size). For Axon, either absent or 2048.
+ - tah-device : 1 cell, optional. If connected to a TAH engine for
+ offload, phandle of the TAH device node.
+ - tah-channel : 1 cell, optional. If appropriate, channel used on the
+ TAH engine.
+
+ Example:
+
+ EMAC0: ethernet@40000800 {
+ device_type = "network";
+ compatible = "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <40000800 70>;
+ local-mac-address = [00 04 AC E3 1B 1E];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000001>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ ii) McMAL node
+
+ Required properties:
+ - device_type : "dma-controller"
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+ emac) and the second is either "ibm,mcmal" or
+ "ibm,mcmal2".
+ For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+ - interrupts : <interrupt mapping for the MAL interrupts sources:
+ 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+ For Axon: This is _different_ from the current
+ firmware. We use the "delayed" interrupts for txeob
+ and rxeob. Thus we end up with mapping those 5 MPIC
+ interrupts, all level positive sensitive: 10, 11, 32,
+ 33, 34 (in decimal)
+ - dcr-reg : < DCR registers range >
+ - dcr-parent : if needed for dcr-reg
+ - num-tx-chans : 1 cell, number of Tx channels
+ - num-rx-chans : 1 cell, number of Rx channels
+
+ iii) ZMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,zmii".
+ For Axon, there is no ZMII node.
+ - reg : <registers mapping>
+
+ iv) RGMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,rgmii".
+ For Axon, "ibm,rgmii-axon","ibm,rgmii"
+ - reg : <registers mapping>
+ - revision : as provided by the RGMII new version register if
+ available.
+ For Axon: 0x0000012a
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
new file mode 100644
index 00000000000..edaa84d288a
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+ &gpio-controller2-phandle gpio2-specifier
+ 0 /* holes are permitted, means no GPIO 3 */
+ &gpio-controller4-phandle gpio4-specifier
+ ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+ node {
+ gpios = <&qe_pio_e 18 0>;
+ };
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+ qe_pio_a: gpio-controller@1400 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller@1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
+
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
new file mode 100644
index 00000000000..bc954952901
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qe_pio_a 11
+ &qe_pio_c 6>;
+};
diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt
new file mode 100644
index 00000000000..3708a2fd474
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/marvell.txt
@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system. In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains. Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+ This node is used to represent the system-controller and must be
+ present when the system uses a system controller chip. The top-level
+ system-controller node contains information that is global to all
+ devices within the system controller chip. The node name begins
+ with "system-controller" followed by the unit address, which is
+ the base address of the memory-mapped register set for the system
+ controller chip.
+
+ Required properties:
+
+ - ranges : Describes the translation of system controller addresses
+ for memory mapped registers.
+ - clock-frequency: Contains the main clock frequency for the system
+ controller chip.
+ - reg : This property defines the address and size of the
+ memory-mapped registers contained within the system controller
+ chip. The address specified in the "reg" property should match
+ the unit address of the system-controller node.
+ - #address-cells : Address representation for system controller
+ devices. This field represents the number of cells needed to
+ represent the address of the memory-mapped registers of devices
+ within the system controller chip.
+ - #size-cells : Size representation for for the memory-mapped
+ registers within the system controller chip.
+ - #interrupt-cells : Defines the width of cells used to represent
+ interrupts.
+
+ Optional properties:
+
+ - model : The specific model of the system controller chip. Such
+ as, "mv64360", "mv64460", or "mv64560".
+ - compatible : A string identifying the compatibility identifiers
+ of the system controller chip.
+
+ The system-controller node contains child nodes for each system
+ controller device that the platform uses. Nodes should not be created
+ for devices which exist on the system controller chip but are not used
+
+ Example Marvell Discovery mv64360 system-controller node:
+
+ system-controller@f1000000 { /* Marvell Discovery mv64360 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "mv64360"; /* Default */
+ compatible = "marvell,mv64360";
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+ [ child node definitions... ]
+ }
+
+2) Child nodes of /system-controller
+
+ a) Marvell Discovery MDIO bus
+
+ The MDIO is a bus to which the PHY devices are connected. For each
+ device that exists on this bus, a child node should be created. See
+ the definition of the PHY node below for an example of how to define
+ a PHY.
+
+ Required properties:
+ - #address-cells : Should be <1>
+ - #size-cells : Should be <0>
+ - device_type : Should be "mdio"
+ - compatible : Should be "marvell,mv64360-mdio"
+
+ Example:
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "marvell,mv64360-mdio";
+
+ ethernet-phy@0 {
+ ......
+ };
+ };
+
+
+ b) Marvell Discovery ethernet controller
+
+ The Discover ethernet controller is described with two levels
+ of nodes. The first level describes an ethernet silicon block
+ and the second level describes up to 3 ethernet nodes within
+ that block. The reason for the multiple levels is that the
+ registers for the node are interleaved within a single set
+ of registers. The "ethernet-block" level describes the
+ shared register set, and the "ethernet" nodes describe ethernet
+ port-specific properties.
+
+ Ethernet block node
+
+ Required properties:
+ - #address-cells : <1>
+ - #size-cells : <0>
+ - compatible : "marvell,mv64360-eth-block"
+ - reg : Offset and length of the register set for this block
+
+ Example Discovery Ethernet block node:
+ ethernet-block@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-block";
+ reg = <0x2000 0x2000>;
+ ethernet@0 {
+ .......
+ };
+ };
+
+ Ethernet port node
+
+ Required properties:
+ - device_type : Should be "network".
+ - compatible : Should be "marvell,mv64360-eth".
+ - reg : Should be <0>, <1>, or <2>, according to which registers
+ within the silicon block the device uses.
+ - interrupts : <a> where a is the interrupt number for the port.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+ - phy : the phandle for the PHY connected to this ethernet
+ controller.
+ - local-mac-address : 6 bytes, MAC address
+
+ Example Discovery Ethernet port node:
+ ethernet@0 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+
+
+ c) Marvell Discovery PHY nodes
+
+ Required properties:
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a> where a is the interrupt number for this phy.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+
+ Example Discovery PHY node:
+ ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,bcm5421";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <1>;
+ };
+
+
+ d) Marvell Discovery SDMA nodes
+
+ Represent DMA hardware associated with the MPSC (multiprotocol
+ serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-sdma"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the DMA
+ device.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SDMA node:
+ sdma@4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ e) Marvell Discovery BRG nodes
+
+ Represent baud rate generator hardware associated with the MPSC
+ (multiprotocol serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-brg"
+ - reg : Offset and length of the register set for this device
+ - clock-src : A value from 0 to 15 which selects the clock
+ source for the baud rate generator. This value corresponds
+ to the CLKS value in the BRGx configuration register. See
+ the mv64x60 User's Manual.
+ - clock-frequence : The frequency (in Hz) of the baud rate
+ generator's input clock.
+ - current-speed : The current speed setting (presumably by
+ firmware) of the baud rate generator.
+
+ Example Discovery BRG node:
+ brg@b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
+ clock-src = <8>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
+ };
+
+
+ f) Marvell Discovery CUNIT nodes
+
+ Represent the Serial Communications Unit device hardware.
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ cunit@f200 {
+ reg = <0xf200 0x200>;
+ };
+
+
+ g) Marvell Discovery MPSCROUTING nodes
+
+ Represent the Discovery's MPSC routing hardware
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ mpscrouting@b500 {
+ reg = <0xb400 0xc>;
+ };
+
+
+ h) Marvell Discovery MPSCINTR nodes
+
+ Represent the Discovery's MPSC DMA interrupt hardware registers
+ (SDMA cause and mask registers).
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPSCINTR node:
+ mpsintr@b800 {
+ reg = <0xb800 0x100>;
+ };
+
+
+ i) Marvell Discovery MPSC nodes
+
+ Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+ serial port.
+
+ Required properties:
+ - device_type : "serial"
+ - compatible : "marvell,mv64360-mpsc"
+ - reg : Offset and length of the register set for this device
+ - sdma : the phandle for the SDMA node used by this port
+ - brg : the phandle for the BRG node used by this port
+ - cunit : the phandle for the CUNIT node used by this port
+ - mpscrouting : the phandle for the MPSCROUTING node used by this port
+ - mpscintr : the phandle for the MPSCINTR node used by this port
+ - cell-index : the hardware index of this cell in the MPSC core
+ - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+ register
+ - interrupts : <a> where a is the interrupt number for the MPSC.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery MPSCINTR node:
+ mpsc@8000 {
+ device_type = "serial";
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ max_idle = <40>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ j) Marvell Discovery Watch Dog Timer nodes
+
+ Represent the Discovery's watchdog timer hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-wdt"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery Watch Dog Timer node:
+ wdt@b410 {
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
+ };
+
+
+ k) Marvell Discovery I2C nodes
+
+ Represent the Discovery's I2C hardware
+
+ Required properties:
+ - device_type : "i2c"
+ - compatible : "marvell,mv64360-i2c"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the I2C.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery I2C node:
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+ Represent the Discovery's PIC hardware
+
+ Required properties:
+ - #interrupt-cells : <1>
+ - #address-cells : <0>
+ - compatible : "marvell,mv64360-pic"
+ - reg : Offset and length of the register set for this device
+ - interrupt-controller
+
+ Example Discovery PIC node:
+ pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0 0x88>;
+ interrupt-controller;
+ };
+
+
+ m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+ Represent the Discovery's MPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-mpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPP node:
+ mpp@f000 {
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
+ };
+
+
+ n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+ Represent the Discovery's GPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-gpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery GPP node:
+ gpp@f000 {
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
+ };
+
+
+ o) Marvell Discovery PCI host bridge node
+
+ Represents the Discovery's PCI host bridge device. The properties
+ for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+ 1275-1994. A typical value for the compatible property is
+ "marvell,mv64360-pci".
+
+ Example Discovery PCI host bridge node
+ pci@80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64360-pci";
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0a */
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
+
+ /* IDSEL 0x0b */
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
+
+ /* IDSEL 0x0c */
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
+
+ /* IDSEL 0x0d */
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
+ >;
+ };
+
+
+ p) Marvell Discovery CPU Error nodes
+
+ Represent the Discovery's CPU error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-cpu-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery CPU Error node:
+ cpu-error@0070 {
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ q) Marvell Discovery SRAM Controller nodes
+
+ Represent the Discovery's SRAM controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-sram-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SRAM Controller node:
+ sram-ctrl@0380 {
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ r) Marvell Discovery PCI Error Handler nodes
+
+ Represent the Discovery's PCI error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-pci-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery PCI Error Handler node:
+ pci-error@1d40 {
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ s) Marvell Discovery Memory Controller nodes
+
+ Represent the Discovery's memory controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-mem-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery Memory Controller node:
+ mem-ctrl@1400 {
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
+ };
+
+
diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt
new file mode 100644
index 00000000000..bb8c742eb8c
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/phy.txt
@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle : phandle for this node; likely referenced by an
+ ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+ linux,phandle = <2452000>
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+};
diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt
new file mode 100644
index 00000000000..e782add2e45
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/spi-bus.txt
@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus. For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode. This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells - number of cells required to define a chip select
+ address on the SPI bus.
+- #size-cells - should be zero.
+- compatible - name of SPI bus controller following generic names
+ recommended practice.
+No other properties are required in the SPI bus node. It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers. Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects. Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg - (required) chip select address of device.
+- compatible - (required) name of SPI device following generic names
+ recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol - (optional) Empty property indicating device requires
+ inverse clock polarity (CPOL) mode
+- spi-cpha - (optional) Empty property indicating device requires
+ shifted clock phase (CPHA) mode
+- spi-cs-high - (optional) Empty property indicating device requires
+ chip select active high
+
+SPI example for an MPC5200 SPI bus:
+ spi@f00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995m";
+ spi-max-frequency = <1000000>;
+ reg = <0>;
+ };
+
+ codec@1 {
+ compatible = "ti,tlv320aic26";
+ spi-max-frequency = <100000>;
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt
new file mode 100644
index 00000000000..fa18612f757
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/usb-ehci.txt
@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+ - compatible : should be "usb-ehci".
+ - reg : should contain at least address and length of the standard EHCI
+ register set for the device. Optional platform-dependent registers
+ (debug-port or other) can be also specified here, but only after
+ definition of standard EHCI registers.
+ - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+ ehci@e0000300 {
+ compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+ interrupt-parent = <&UIC0>;
+ interrupts = <1a 4>;
+ reg = <0 e0000300 90 0 e0000390 70>;
+ big-endian;
+ };
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
new file mode 100644
index 00000000000..80339fe4300
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -0,0 +1,295 @@
+ d) Xilinx IP cores
+
+ The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+ in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
+ of standard device types (network, serial, etc.) and miscellaneous
+ devices (gpio, LCD, spi, etc). Also, since these devices are
+ implemented within the fpga fabric every instance of the device can be
+ synthesised with different options that change the behaviour.
+
+ Each IP-core has a set of parameters which the FPGA designer can use to
+ control how the core is synthesized. Historically, the EDK tool would
+ extract the device parameters relevant to device drivers and copy them
+ into an 'xparameters.h' in the form of #define symbols. This tells the
+ device drivers how the IP cores are configured, but it requres the kernel
+ to be recompiled every time the FPGA bitstream is resynthesized.
+
+ The new approach is to export the parameters into the device tree and
+ generate a new device tree each time the FPGA bitstream changes. The
+ parameters which used to be exported as #defines will now become
+ properties of the device node. In general, device nodes for IP-cores
+ will take the following form:
+
+ (name): (generic-name)@(base-address) {
+ compatible = "xlnx,(ip-core-name)-(HW_VER)"
+ [, (list of compatible devices), ...];
+ reg = <(baseaddr) (size)>;
+ interrupt-parent = <&interrupt-controller-phandle>;
+ interrupts = < ... >;
+ xlnx,(parameter1) = "(string-value)";
+ xlnx,(parameter2) = <(int-value)>;
+ };
+
+ (generic-name): an open firmware-style name that describes the
+ generic class of device. Preferably, this is one word, such
+ as 'serial' or 'ethernet'.
+ (ip-core-name): the name of the ip block (given after the BEGIN
+ directive in system.mhs). Should be in lowercase
+ and all underscores '_' converted to dashes '-'.
+ (name): is derived from the "PARAMETER INSTANCE" value.
+ (parameter#): C_* parameters from system.mhs. The C_ prefix is
+ dropped from the parameter name, the name is converted
+ to lowercase and all underscore '_' characters are
+ converted to dashes '-'.
+ (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
+ (HW_VER): from the HW_VER parameter.
+ (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+ Typically, the compatible list will include the exact IP core version
+ followed by an older IP core version which implements the same
+ interface or any other device with the same interface.
+
+ 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+ For example, the following block from system.mhs:
+
+ BEGIN opb_uartlite
+ PARAMETER INSTANCE = opb_uartlite_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BAUDRATE = 115200
+ PARAMETER C_DATA_BITS = 8
+ PARAMETER C_ODD_PARITY = 0
+ PARAMETER C_USE_PARITY = 0
+ PARAMETER C_CLK_FREQ = 50000000
+ PARAMETER C_BASEADDR = 0xEC100000
+ PARAMETER C_HIGHADDR = 0xEC10FFFF
+ BUS_INTERFACE SOPB = opb_7
+ PORT OPB_Clk = CLK_50MHz
+ PORT Interrupt = opb_uartlite_0_Interrupt
+ PORT RX = opb_uartlite_0_RX
+ PORT TX = opb_uartlite_0_TX
+ PORT OPB_Rst = sys_bus_reset_0
+ END
+
+ becomes the following device tree node:
+
+ opb_uartlite_0: serial@ec100000 {
+ device_type = "serial";
+ compatible = "xlnx,opb-uartlite-1.00.b";
+ reg = <ec100000 10000>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <1 0>; // got this from the opb_intc parameters
+ current-speed = <d#115200>; // standard serial device prop
+ clock-frequency = <d#50000000>; // standard serial device prop
+ xlnx,data-bits = <8>;
+ xlnx,odd-parity = <0>;
+ xlnx,use-parity = <0>;
+ };
+
+ Some IP cores actually implement 2 or more logical devices. In
+ this case, the device should still describe the whole IP core with
+ a single node and add a child node for each logical device. The
+ ranges property can be used to translate from parent IP-core to the
+ registers of each device. In addition, the parent node should be
+ compatible with the bus type 'xlnx,compound', and should contain
+ #address-cells and #size-cells, as with any other bus. (Note: this
+ makes the assumption that both logical devices have the same bus
+ binding. If this is not true, then separate nodes should be used
+ for each logical device). The 'cell-index' property can be used to
+ enumerate logical devices within an IP core. For example, the
+ following is the system.mhs entry for the dual ps2 controller found
+ on the ml403 reference design.
+
+ BEGIN opb_ps2_dual_ref
+ PARAMETER INSTANCE = opb_ps2_dual_ref_0
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_BASEADDR = 0xA9000000
+ PARAMETER C_HIGHADDR = 0xA9001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ PORT Sys_Intr1 = ps2_1_intr
+ PORT Sys_Intr2 = ps2_2_intr
+ PORT Clkin1 = ps2_clk_rx_1
+ PORT Clkin2 = ps2_clk_rx_2
+ PORT Clkpd1 = ps2_clk_tx_1
+ PORT Clkpd2 = ps2_clk_tx_2
+ PORT Rx1 = ps2_d_rx_1
+ PORT Rx2 = ps2_d_rx_2
+ PORT Txpd1 = ps2_d_tx_1
+ PORT Txpd2 = ps2_d_tx_2
+ END
+
+ It would result in the following device tree nodes:
+
+ opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ranges = <0 a9000000 2000>;
+ // If this device had extra parameters, then they would
+ // go here.
+ ps2@0 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <0 40>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ ps2@1000 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <1000 40>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ };
+
+ Also, the system.mhs file defines bus attachments from the processor
+ to the devices. The device tree structure should reflect the bus
+ attachments. Again an example; this system.mhs fragment:
+
+ BEGIN ppc405_virtex4
+ PARAMETER INSTANCE = ppc405_0
+ PARAMETER HW_VER = 1.01.a
+ BUS_INTERFACE DPLB = plb_v34_0
+ BUS_INTERFACE IPLB = plb_v34_0
+ END
+
+ BEGIN opb_intc
+ PARAMETER INSTANCE = opb_intc_0
+ PARAMETER HW_VER = 1.00.c
+ PARAMETER C_BASEADDR = 0xD1000FC0
+ PARAMETER C_HIGHADDR = 0xD1000FDF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN opb_uart16550
+ PARAMETER INSTANCE = opb_uart16550_0
+ PARAMETER HW_VER = 1.00.d
+ PARAMETER C_BASEADDR = 0xa0000000
+ PARAMETER C_HIGHADDR = 0xa0001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN plb_v34
+ PARAMETER INSTANCE = plb_v34_0
+ PARAMETER HW_VER = 1.02.a
+ END
+
+ BEGIN plb_bram_if_cntlr
+ PARAMETER INSTANCE = plb_bram_if_cntlr_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BASEADDR = 0xFFFF0000
+ PARAMETER C_HIGHADDR = 0xFFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ END
+
+ BEGIN plb2opb_bridge
+ PARAMETER INSTANCE = plb2opb_bridge_0
+ PARAMETER HW_VER = 1.01.a
+ PARAMETER C_RNG0_BASEADDR = 0x20000000
+ PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+ PARAMETER C_RNG1_BASEADDR = 0x60000000
+ PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+ PARAMETER C_RNG2_BASEADDR = 0x80000000
+ PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+ PARAMETER C_RNG3_BASEADDR = 0xC0000000
+ PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ BUS_INTERFACE MOPB = opb_v20_0
+ END
+
+ Gives this device tree (some properties removed for clarity):
+
+ plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v34-1.02.a";
+ device_type = "ibm,plb";
+ ranges; // 1:1 translation
+
+ plb_bram_if_cntrl_0: bram@ffff0000 {
+ reg = <ffff0000 10000>;
+ }
+
+ opb@20000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <20000000 20000000 20000000
+ 60000000 60000000 20000000
+ 80000000 80000000 40000000
+ c0000000 c0000000 20000000>;
+
+ opb_uart16550_0: serial@a0000000 {
+ reg = <a00000000 2000>;
+ };
+
+ opb_intc_0: interrupt-controller@d1000fc0 {
+ reg = <d1000fc0 20>;
+ };
+ };
+ };
+
+ That covers the general approach to binding xilinx IP cores into the
+ device tree. The following are bindings for specific devices:
+
+ i) Xilinx ML300 Framebuffer
+
+ Simple framebuffer device from the ML300 reference design (also on the
+ ML403 reference design as well as others).
+
+ Optional properties:
+ - resolution = <xres yres> : pixel resolution of framebuffer. Some
+ implementations use a different resolution.
+ Default is <d#640 d#480>
+ - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+ Default is <d#1024 d#480>.
+ - rotate-display (empty) : rotate display 180 degrees.
+
+ ii) Xilinx SystemACE
+
+ The Xilinx SystemACE device is used to program FPGAs from an FPGA
+ bitstream stored on a CF card. It can also be used as a generic CF
+ interface device.
+
+ Optional properties:
+ - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+ iii) Xilinx EMAC and Xilinx TEMAC
+
+ Xilinx Ethernet devices. In addition to general xilinx properties
+ listed above, nodes for these devices should include a phy-handle
+ property, and may include other common network device properties
+ like local-mac-address.
+
+ iv) Xilinx Uartlite
+
+ Xilinx uartlite devices are simple fixed speed serial ports.
+
+ Required properties:
+ - current-speed : Baud rate of uartlite
+
+ v) Xilinx hwicap
+
+ Xilinx hwicap devices provide access to the configuration logic
+ of the FPGA through the Internal Configuration Access Port
+ (ICAP). The ICAP enables partial reconfiguration of the FPGA,
+ readback of the configuration information, and some control over
+ 'warm boots' of the FPGA fabric.
+
+ Required properties:
+ - xlnx,family : The family of the FPGA, necessary since the
+ capabilities of the underlying ICAP hardware
+ differ between different families. May be
+ 'virtex2p', 'virtex4', or 'virtex5'.
+
+ vi) Xilinx Uart 16550
+
+ Xilinx UART 16550 devices are very similar to the NS16550 but with
+ different register spacing and an offset from the base address.
+
+ Required properties:
+ - clock-frequency : Frequency of the clock input
+ - reg-offset : A value of 3 is required
+ - reg-shift : A value of 2 is required
+
+
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedfa05d..d00131ca083 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT
config TRACE_IRQFLAGS_SUPPORT
bool
- depends on PPC64
default y
config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd11a6..3d80c3e9cf6 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@ zImage.pseries
zconf.h
zlib.h
zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fca2ed..49ac36b16dd 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
devsel-speed = <0x00000001>;
min-grant = <0>;
max-latency = <0>;
- /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
- ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+ /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
interrupt-parent = <&i8259>;
#interrupt-cells = <2>;
#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb018c4a..a680165292f 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
/* Filled in by U-Boot */
clock-frequency = <0>;
status = "disabled";
+ sdhci,1-bit-only;
};
crypto@30000 {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff798744c1..7685ffde882 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@ typedef struct risc_timer_pram {
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#define IMAP_ADDR (get_immrbase())
-
#define CPM_PIN_INPUT 0
#define CPM_PIN_OUTPUT 1
#define CPM_PIN_PRIMARY 0
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887c3c0..b44aaabdd1a 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
size, direction);
}
@@ -320,7 +322,9 @@ static inline void dma_sync_single_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle,
0, size, direction);
}
@@ -331,7 +335,9 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_cpu)
+ dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
}
static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@ static inline void dma_sync_sg_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_device)
+ dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle,
offset, size, direction);
}
@@ -362,7 +372,9 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
size, direction);
}
#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f4324..a74c4ee6c02 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
#ifdef __KERNEL__
-#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/highmem.h>
#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/page.h>
@@ -62,6 +60,9 @@ extern pte_t *pkmap_page_table;
extern void *kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+ pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
static inline void *kmap(struct page *page)
{
@@ -79,62 +80,11 @@ static inline void kunmap(struct page *page)
kunmap_high(page);
}
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
- unsigned int idx;
- unsigned long vaddr;
-
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
- pagefault_disable();
- if (!PageHighMem(page))
- return page_address(page);
-
- debug_kmap_atomic(type);
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
- __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
- local_flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-
static inline void *kmap_atomic(struct page *page, enum km_type type)
{
return kmap_atomic_prot(page, type, kmap_prot);
}
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
- if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
- pagefault_enable();
- return;
- }
-
- BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- local_flush_tlb_page(NULL, vaddr);
-#endif
- pagefault_enable();
-}
-
static inline struct page *kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@ static inline struct page *kmap_atomic_to_page(void *ptr)
return pte_page(*pte);
}
+
#define flush_cache_kmaps() flush_cache_all()
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8ed69b..8b505eaaa38 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(unsigned long flags)
#if defined(CONFIG_BOOKE)
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#else
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) mtmsr(flags)
+#define raw_local_irq_restore(flags) mtmsr(flags)
#endif
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@ static inline void local_irq_disable(void)
#endif
}
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@ static inline void local_irq_enable(void)
#endif
}
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
{
unsigned long msr;
msr = mfmsr();
@@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(unsigned long *flags)
#endif
}
-#define local_save_flags(flags) ((flags) = mfmsr())
-#define local_irq_save(flags) local_irq_save_ptr(&flags)
-#define irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags) ((flags) = mfmsr())
+#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0)
-#define hard_irq_enable() local_irq_enable()
-#define hard_irq_disable() local_irq_disable()
+#define hard_irq_disable() raw_local_irq_disable()
static inline int irqs_disabled_flags(unsigned long flags)
{
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26fa372..82b72207c51 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
* generic accessors and iterators here
*/
#define __real_pte(e,p) ((real_pte_t) { \
- (e), pte_val(*((p) + PTRS_PER_PTE)) })
+ (e), ((e) & _PAGE_COMBO) ? \
+ (pte_val(*((p) + PTRS_PER_PTE))) : 0 })
#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
(((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
#define __rpte_to_pte(r) ((r).pte)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c12339b30..168fce72620 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@ struct rtas_t {
unsigned long entry; /* physical address pointer */
unsigned long base; /* physical address pointer */
unsigned long size;
- spinlock_t lock;
+ raw_spinlock_t lock;
struct rtas_args args;
struct device_node *dev; /* virtual address pointer */
};
@@ -245,5 +245,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
(devfn << 8) | (reg & 0xff);
}
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f12915..3cadba60a4b 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@ transfer_to_handler_cont:
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ lis r12,reenable_mmu@h
+ ori r12,r12,reenable_mmu@l
+ mtspr SPRN_SRR0,r12
+ mtspr SPRN_SRR1,r10
+ SYNC
+ RFI
+reenable_mmu: /* re-enable mmu so we can */
+ mfmsr r10
+ lwz r12,_MSR(r1)
+ xor r10,r10,r12
+ andi. r10,r10,MSR_EE /* Did EE change? */
+ beq 1f
+
+ /* Save handler and return address into the 2 unused words
+ * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+ * else can be recovered from the pt_regs except r3 which for
+ * normal interrupts has been set to pt_regs and for syscalls
+ * is an argument, so we temporarily use ORIG_GPR3 to save it
+ */
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,ORIG_GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r0,GPR0(r1)
+ lwz r3,ORIG_GPR3(r1)
+ lwz r4,GPR4(r1)
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ lwz r9,8(r1)
+ lwz r11,12(r1)
+1: mtctr r11
+ mtlr r9
+ bctr /* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@ _GLOBAL(DoSyscall)
#ifdef SHOW_SYSCALLS
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Return from syscalls can (and generally will) hard enable
+ * interrupts. You aren't supposed to call a syscall with
+ * interrupts disabled in the first place. However, to ensure
+ * that we get it right vs. lockdep if it happens, we force
+ * that hard enable here with appropriate tracing if we see
+ * that we have been called with interrupts off
+ */
+ mfmsr r11
+ andi. r12,r11,MSR_EE
+ bne+ 1f
+ /* We came in with interrupts disabled, we enable them now */
+ bl trace_hardirqs_on
+ mfmsr r11
+ lwz r0,GPR0(r1)
+ lwz r3,GPR3(r1)
+ lwz r4,GPR4(r1)
+ ori r11,r11,MSR_EE
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ mtmsr r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@ ret_from_syscall:
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ /* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@ ret_from_syscall:
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
+ lwz r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* If we are going to return from the syscall with interrupts
+ * off, we trace that here. It shouldn't happen though but we
+ * want to catch the bugger if it does right ?
+ */
+ andi. r10,r8,MSR_EE
+ bne+ 1f
+ stw r3,GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
- lwz r8,_MSR(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
@@ -394,7 +470,9 @@ syscall_exit_work:
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq ret_from_except
- /* Re-enable interrupts */
+ /* Re-enable interrupts. There is no need to trace that with
+ * lockdep as we are supposed to have IRQs on at this point
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
@@ -705,6 +783,7 @@ ret_from_except:
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
+ /* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
@@ -744,11 +823,24 @@ resume_kernel:
beq+ restore
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep thinks irqs are enabled, we need to call
+ * preempt_schedule_irq with IRQs off, so we inform lockdep
+ * now that we -did- turn them off already
+ */
+ bl trace_hardirqs_off
+#endif
1: bl preempt_schedule_irq
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* And now, to properly rebalance the above, we tell lockdep they
+ * are being turned back on, which will happen when we return
+ */
+ bl trace_hardirqs_on
+#endif
#else
resume_kernel:
#endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@ restore:
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
+
+ lwz r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep doesn't know about the fact that IRQs are temporarily turned
+ * off in this assembly code while peeking at TI_FLAGS() and such. However
+ * we need to inform it if the exception turned interrupts off, and we
+ * are about to trun them back on.
+ *
+ * The problem here sadly is that we don't know whether the exceptions was
+ * one that turned interrupts off or not. So we always tell lockdep about
+ * turning them on here when we go back to wherever we came from with EE
+ * on, even if that may meen some redudant calls being tracked. Maybe later
+ * we could encode what the exception did somewhere or test the exception
+ * type in the pt_regs but that sounds overkill
+ */
+ andi. r10,r9,MSR_EE
+ beq 1f
+ bl trace_hardirqs_on
+ lwz r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
- lwz r9,_MSR(r1)
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
@@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
- lwz r9,_MSR(r1)
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@ do_work: /* r10 contains MSR_KERNEL here */
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
+ /* Note: We don't need to inform lockdep that we are enabling
+ * interrupts here. As far as it knows, they are already enabled
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
+ /* Note: And we don't tell it we are disabling them again
+ * neither. Those disable/enable cycles used to peek at
+ * TI_FLAGS aren't advertised.
+ */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 48469463f89..fc213294275 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@ mmu_off:
RFI
/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET. From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
*/
initial_bats:
lis r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@ initial_bats:
bne 4f
ori r11,r11,4 /* set up BAT registers for 601 */
li r8,0x7f /* valid, block length = 8MB */
- oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
- oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
mtspr SPRN_IBAT0L,r8 /* lower BAT register */
- mtspr SPRN_IBAT1U,r9
- mtspr SPRN_IBAT1L,r10
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT1U,r11
+ mtspr SPRN_IBAT1L,r8
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT2U,r11
+ mtspr SPRN_IBAT2L,r8
isync
blr
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a59c4c..a359cb08e90 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np,
dev->dev.archdata.of_node = np;
if (bus_id)
- dev_set_name(&dev->dev, bus_id);
+ dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(dev);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135bbe40..892a9f2e6d7 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@ void show_regs(struct pt_regs * regs)
for (i = 0; i < 32; i++) {
if ((i % REGS_PER_LINE) == 0)
- printk("\n" KERN_INFO "GPR%02d: ", i);
+ printk("\nGPR%02d: ", i);
printk(REG " ", regs->gpr[i]);
if (i == LAST_VOLATILE && !FULL_REGS(regs))
break;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c7609b64..c434823b8c8 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,9 +38,10 @@
#include <asm/syscalls.h>
#include <asm/smp.h>
#include <asm/atomic.h>
+#include <asm/time.h>
struct rtas_t rtas = {
- .lock = SPIN_LOCK_UNLOCKED
+ .lock = __RAW_SPIN_LOCK_UNLOCKED
};
EXPORT_SYMBOL(rtas);
@@ -67,6 +68,28 @@ unsigned long rtas_rmo_buf;
void (*rtas_flash_term_hook)(int);
EXPORT_SYMBOL(rtas_flash_term_hook);
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ __raw_spin_lock_flags(&rtas.lock, flags);
+ return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+ __raw_spin_unlock(&rtas.lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
/*
* call_rtas_display_status and call_rtas_display_status_delay
* are designed only for very early low-level debugging, which
@@ -79,7 +102,7 @@ static void call_rtas_display_status(char c)
if (!rtas.base)
return;
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
args->token = 10;
args->nargs = 1;
@@ -89,7 +112,7 @@ static void call_rtas_display_status(char c)
enter_rtas(__pa(args));
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
}
static void call_rtas_display_status_delay(char c)
@@ -411,8 +434,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
return -1;
- /* Gotta do something different here, use global lock for now... */
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
rtas_args = &rtas.args;
rtas_args->token = token;
@@ -439,8 +461,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
outputs[i] = rtas_args->rets[i+1];
ret = (nret > 0)? rtas_args->rets[0]: 0;
- /* Gotta do something different here, use global lock for now... */
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
if (buff_copy) {
log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +858,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
buff_copy = get_errorlog_buffer();
- spin_lock_irqsave(&rtas.lock, flags);
+ flags = lock_rtas();
rtas.args = args;
enter_rtas(__pa(&rtas.args));
@@ -848,7 +869,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
if (args.rets[0] == -1)
errbuf = __fetch_rtas_last_error(buff_copy);
- spin_unlock_irqrestore(&rtas.lock, flags);
+ unlock_rtas(flags);
if (buff_copy) {
if (errbuf)
@@ -951,3 +972,33 @@ int __init early_init_dt_scan_rtas(unsigned long node,
/* break now */
return 1;
}
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
+ rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+ timebase = get_tb();
+ __raw_spin_unlock(&timebase_lock);
+
+ while (timebase)
+ barrier();
+ rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+ local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+ while (!timebase)
+ barrier();
+ __raw_spin_lock(&timebase_lock);
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ __raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d154248cf4..e1e3059cf34 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
*/
notrace void __init machine_init(unsigned long dt_ptr)
{
+ lockdep_init();
+
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2200b..0b47de07302 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map);
/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
int smt_enabled_at_boot = 1;
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a891e54..acb74a17bbb 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@ void udbg_init_pas_realmode(void)
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e48de..3e68363405b 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 00000000000..c2186c74c85
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ debug_kmap_atomic(type);
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+ __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+ local_flush_tlb_page(NULL, vaddr);
+
+ return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+ pagefault_enable();
+ return;
+ }
+
+ BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(&init_mm, vaddr, kmap_pte-idx);
+ local_flush_tlb_page(NULL, vaddr);
+#endif
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9f77e..0362c88f47d 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -65,7 +66,6 @@ define_machine(warp) {
static u32 post_info;
-/* I am not sure this is the best place for this... */
static int __init warp_post_info(void)
{
struct device_node *np;
@@ -194,9 +194,9 @@ static int pika_setup_leds(void)
return 0;
}
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+ struct i2c_client *client)
{
- struct device_node *np;
int irq, rc;
/* Do this before enabling critical temp interrupt since we
@@ -208,14 +208,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */
- np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
- if (np == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
- return;
- }
-
irq = irq_of_parse_and_map(np, 0);
- of_node_put(np);
if (irq == NO_IRQ) {
printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
return;
@@ -244,32 +237,24 @@ static inline void pika_dtm_check_fan(void __iomem *fpga)
static int pika_dtm_thread(void __iomem *fpga)
{
- struct i2c_adapter *adap;
+ struct device_node *np;
struct i2c_client *client;
- /* We loop in case either driver was compiled as a module and
- * has not been insmoded yet.
- */
- while (!(adap = i2c_get_adapter(0))) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
- }
-
- while (1) {
- list_for_each_entry(client, &adap->clients, list)
- if (client->addr == 0x4a)
- goto found_it;
+ np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+ if (np == NULL)
+ return -ENOENT;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
+ client = of_find_i2c_device_by_node(np);
+ if (client == NULL) {
+ of_node_put(np);
+ return -ENOENT;
}
-found_it:
- pika_setup_critical_temp(client);
+ pika_setup_critical_temp(np, client);
- i2c_put_adapter(adap);
+ of_node_put(np);
- printk(KERN_INFO "PIKA DTM thread running.\n");
+ printk(KERN_INFO "Warp DTM thread running.\n");
while (!kthread_should_stop()) {
int val;
@@ -291,7 +276,6 @@ found_it:
return 0;
}
-
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b35635..60ed9c067b1 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -285,6 +285,7 @@ static struct of_device_id mpc85xx_ids[] = {
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db8a6f..62c592ede64 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@ smp_85xx_kick_cpu(int nr)
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
- local_irq_save(flags);
-
np = of_get_cpu_node(nr, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
- local_irq_restore(flags);
return;
}
/* Map the spin table */
bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+ local_irq_save(flags);
+
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
@@ -73,10 +72,10 @@ smp_85xx_kick_cpu(int nr)
while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
mdelay(1);
- iounmap(bptr_vaddr);
-
local_irq_restore(flags);
+ iounmap(bptr_vaddr);
+
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
}
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443b12c..747d8fb3ab8 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = {
{},
};
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
{
- of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+ return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
}
+machine_device_initcall(socrates, socrates_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@ define_machine(socrates) {
.name = "Socrates",
.probe = socrates_probe,
.setup_arch = socrates_setup_arch,
- .init = socrates_init,
.init_IRQ = socrates_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532786e..1b426050a2f 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
/* A few bit definitions needed for fixups on some boards */
#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803c827..bc97fada48c 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -140,31 +139,6 @@ static void __devinit smp_cell_setup_cpu(int cpu)
mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_cell_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@ void __init smp_init_cell(void)
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = cell_give_timebase;
- smp_ops->take_timebase = cell_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d063b..02cafecc90e 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
@@ -42,40 +41,12 @@ static void __devinit smp_chrp_setup_cpu(int cpu_nr)
mpic_setup_this_cpu();
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase_upper = get_tbu();
- timebase_lower = get_tbl();
- spin_unlock(&timebase_lock);
-
- while (timebase_upper || timebase_lower)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
- while (!(timebase_upper || timebase_lower))
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase_upper, timebase_lower);
- timebase_upper = 0;
- timebase_lower = 0;
- spin_unlock(&timebase_lock);
- printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
/* CHRP with openpic */
struct smp_ops_t chrp_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_chrp_kick_cpu,
.setup_cpu = smp_chrp_setup_cpu,
- .give_timebase = smp_chrp_give_timebase,
- .take_timebase = smp_chrp_take_timebase,
+ .give_timebase = rtas_give_timebase,
+ .take_timebase = rtas_take_timebase,
};
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051eb6d9..a4619347aa7 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@ static void pas_restart(char *cmd)
}
#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
static unsigned long timebase;
static void __devinit pas_give_timebase(void)
{
- spin_lock(&timebase_lock);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
mtspr(SPRN_TBCTL, TBCTL_FREEZE);
isync();
timebase = get_tb();
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
while (timebase)
barrier();
mtspr(SPRN_TBCTL, TBCTL_RESTART);
+ local_irq_restore(flags);
}
static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@ static void __devinit pas_take_timebase(void)
while (!timebase)
smp_rmb();
- spin_lock(&timebase_lock);
+ __raw_spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
}
struct smp_ops_t pas_smp_ops = {
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4eb49..c2052265636 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs;
EXPORT_SYMBOL(smu_cmdbuf_abs);
#endif
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
@@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void)
ROOT_DEV = DEFAULT_ROOT_DEVICE;
#endif
-#ifdef CONFIG_SMP
- /* Check for Core99 */
- ic = of_find_node_by_name(NULL, "uni-n");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u3");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u4");
- if (ic) {
- of_node_put(ic);
- smp_ops = &core99_smp_ops;
- }
-#ifdef CONFIG_PPC32
- else {
- /*
- * We have to set bits in cpu_possible_map here since the
- * secondary CPU(s) aren't in the device tree, and
- * setup_per_cpu_areas only allocates per-cpu data for
- * CPUs in the cpu_possible_map.
- */
- int cpu;
-
- for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
- cpu_set(cpu, cpu_possible_map);
- smp_ops = &psurge_smp_ops;
- }
-#endif
-#endif /* CONFIG_SMP */
-
#ifdef CONFIG_ADB
if (strstr(cmd_line, "adb_sync")) {
extern int __adb_probe_sync;
@@ -512,6 +479,14 @@ static void __init pmac_init_early(void)
#ifdef CONFIG_PPC64
iommu_init_early_dart();
#endif
+
+ /* SMP Init has to be done early as we need to patch up
+ * cpu_possible_map before interrupt stacks are allocated
+ * or kaboom...
+ */
+#ifdef CONFIG_SMP
+ pmac_setup_smp();
+#endif
}
static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe75889..6d4da7b46b4 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
extern void __secondary_start_pmac_0(void);
extern int pmac_pfunc_base_install(void);
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
/*
* Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void)
psurge_quad_init();
/* All released cards using this HW design have 4 CPUs */
ncpus = 4;
+ /* No sure how timebase sync works on those, let's use SW */
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
} else {
iounmap(quad_base);
if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void)
psurge_start = ioremap(PSURGE_START, 4);
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
- /*
- * This is necessary because OF doesn't know about the
+ /* This is necessary because OF doesn't know about the
* secondary cpu(s), and thus there aren't nodes in the
* device tree for them, and smp_setup_cpu_maps hasn't
- * set their bits in cpu_possible_map and cpu_present_map.
+ * set their bits in cpu_present_map.
*/
if (ncpus > NR_CPUS)
ncpus = NR_CPUS;
- for (i = 1; i < ncpus ; ++i) {
+ for (i = 1; i < ncpus ; ++i)
cpu_set(i, cpu_present_map);
- set_hard_smp_processor_id(i, i);
- }
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
@@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void)
static void __init smp_psurge_kick_cpu(int nr)
{
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
- unsigned long a;
- int i;
+ unsigned long a, flags;
+ int i, j;
+
+ /* Defining this here is evil ... but I prefer hiding that
+ * crap to avoid giving people ideas that they can do the
+ * same.
+ */
+ extern volatile unsigned int cpu_callin_map[NR_CPUS];
/* may need to flush here if secondary bats aren't setup */
for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr)
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+ /* This is going to freeze the timeebase, we disable interrupts */
+ local_irq_save(flags);
+
out_be32(psurge_start, start);
mb();
psurge_set_ipi(nr);
+
/*
* We can't use udelay here because the timebase is now frozen.
*/
for (i = 0; i < 2000; ++i)
- barrier();
+ asm volatile("nop" : : : "memory");
psurge_clr_ipi(nr);
- if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt. This routine
- * uses this to get the timebases synchronized.
- * -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
- int t;
-
- set_dec(tb_ticks_per_jiffy);
- /* XXX fixme */
- set_tb(0, 0);
-
- if (cpu_nr > 0) {
+ /*
+ * Also, because the timebase is frozen, we must not return to the
+ * caller which will try to do udelay's etc... Instead, we wait -here-
+ * for the CPU to callin.
+ */
+ for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+ for (j = 1; j < 10000; j++)
+ asm volatile("nop" : : : "memory");
+ asm volatile("sync" : : : "memory");
+ }
+ if (!cpu_callin_map[nr])
+ goto stuck;
+
+ /* And we do the TB sync here too for standard dual CPU cards */
+ if (psurge_type == PSURGE_DUAL) {
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
mb();
- sec_tb_reset = 1;
- return;
}
+ stuck:
+ /* now interrupt the secondary, restarting both TBs */
+ if (psurge_type == PSURGE_DUAL)
+ psurge_set_ipi(1);
- /* wait for the secondary to have reset its TB before proceeding */
- for (t = 10000000; t > 0 && !sec_tb_reset; --t)
- ;
-
- /* now interrupt the secondary, starting both TBs */
- psurge_set_ipi(1);
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
}
static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = {
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
+ if (cpu_nr != 0)
+ return;
- if (cpu_nr == 0) {
- /* If we failed to start the second CPU, we should still
- * send it an IPI to start the timebase & DEC or we might
- * have them stuck.
- */
- if (num_online_cpus() < 2) {
- if (psurge_type == PSURGE_DUAL)
- psurge_set_ipi(1);
- return;
- }
- /* reset the entry point so if we get another intr we won't
- * try to startup again */
- out_be32(psurge_start, 0x100);
- if (setup_irq(30, &psurge_irqaction))
- printk(KERN_ERR "Couldn't get primary IPI interrupt");
- }
-
- if (psurge_type == PSURGE_DUAL)
- psurge_dual_sync_tb(cpu_nr);
+ /* reset the entry point so if we get another intr we won't
+ * try to startup again */
+ out_be32(psurge_start, 0x100);
+ if (setup_irq(30, &psurge_irqaction))
+ printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
void __init smp_psurge_take_timebase(void)
{
- /* Dummy implementation */
+ if (psurge_type != PSURGE_DUAL)
+ return;
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+ set_dec(tb_ticks_per_jiffy/2);
}
void __init smp_psurge_give_timebase(void)
{
- /* Dummy implementation */
+ /* Nothing to do here */
}
/* PowerSurge-style Macs */
@@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = {
* Core 99 and later support
*/
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
static void smp_core99_give_timebase(void)
{
@@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void)
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
mb();
- set_dec(tb_ticks_per_jiffy/2);
local_irq_restore(flags);
}
@@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = {
# endif
#endif
};
+
+void __init pmac_setup_smp(void)
+{
+ struct device_node *np;
+
+ /* Check for Core99 */
+ np = of_find_node_by_name(NULL, "uni-n");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u3");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u4");
+ if (np) {
+ of_node_put(np);
+ smp_ops = &core99_smp_ops;
+ }
+#ifdef CONFIG_PPC32
+ else {
+ /* We have to set bits in cpu_possible_map here since the
+ * secondary CPU(s) aren't in the device tree. Various
+ * things won't be initialized for CPUs not in the possible
+ * map, so we really need to fix it up here.
+ */
+ int cpu;
+
+ for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+ cpu_set(cpu, cpu_possible_map);
+ smp_ops = &psurge_smp_ops;
+ }
+#endif /* CONFIG_PPC32 */
+}
+
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c389ba..1f8f6cfb94f 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -118,31 +117,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
}
#endif /* CONFIG_XICS */
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_pSeries_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@ static void __init smp_init_pseries(void)
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = pSeries_give_timebase;
- smp_ops->take_timebase = pSeries_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
pr_debug(" <- smp_init_pSeries()\n");
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af504549..d46de1f0f3e 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
}
#ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+ struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
const u32 *dbasep;
- dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+ dbasep = of_get_property(node, "dcr-reg", NULL);
- rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+ rb->dhost = dcr_map(node, *dbasep + offset, size);
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
- struct mpic_reg_bank *rb, unsigned int offset,
- unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+ phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+ unsigned int offset, unsigned int size)
{
if (mpic->flags & MPIC_USES_DCR)
- _mpic_map_dcr(mpic, rb, offset, size);
+ _mpic_map_dcr(mpic, node, rb, offset, size);
else
_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
}
#else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#endif /* !CONFIG_PPC_DCR */
@@ -1052,11 +1053,10 @@ struct mpic * __init mpic_alloc(struct device_node *node,
int intvec_top;
u64 paddr = phys_addr;
- mpic = alloc_bootmem(sizeof(struct mpic));
+ mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
return NULL;
-
- memset(mpic, 0, sizeof(struct mpic));
+
mpic->name = name;
mpic->hc_irq = mpic_irq_chip;
@@ -1152,8 +1152,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
}
/* Map the global registers */
- mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
- mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1194,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
- mpic_map(mpic, paddr, &mpic->cpuregs[i],
+ mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@@ -1202,7 +1202,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic_map(mpic, paddr, &mpic->isus[0],
+ mpic_map(mpic, node, paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1256,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
BUG_ON(isu_num >= MPIC_MAX_ISU);
- mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+ mpic_map(mpic, mpic->irqhost->of_node,
+ paddr, &mpic->isus[isu_num], 0,
MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
if ((isu_first + mpic->isu_size) > mpic->num_sources)
mpic->num_sources = isu_first + mpic->isu_size;
}
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e512d6..237e3654f48 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
+ u32 ret;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
}
/* wait for the QE_CR_FLG to clear */
- while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
- cpu_relax();
+ ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+ 100, 0);
+ /* On timeout (e.g. failure), the expression will be false (ret == 0),
+ otherwise it will be true (ret == 1). */
spin_unlock_irqrestore(&qe_lock, flags);
- return 0;
+ return ret == 1;
}
EXPORT_SYMBOL(qe_issue_cmd);
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 140ea10ecb8..c02db01f736 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -27,6 +27,7 @@
#include <linux/cdev.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <asm/pgtable.h>
#include <asm/io.h>
/*
@@ -75,12 +76,13 @@ static struct class *bsr_class;
static int bsr_major;
enum {
- BSR_8 = 0,
- BSR_16 = 1,
- BSR_64 = 2,
- BSR_128 = 3,
- BSR_UNKNOWN = 4,
- BSR_MAX = 5,
+ BSR_8 = 0,
+ BSR_16 = 1,
+ BSR_64 = 2,
+ BSR_128 = 3,
+ BSR_4096 = 4,
+ BSR_UNKNOWN = 5,
+ BSR_MAX = 6,
};
static unsigned bsr_types[BSR_MAX];
@@ -117,15 +119,22 @@ static int bsr_mmap(struct file *filp, struct vm_area_struct *vma)
{
unsigned long size = vma->vm_end - vma->vm_start;
struct bsr_dev *dev = filp->private_data;
+ int ret;
- if (size > dev->bsr_len || (size & (PAGE_SIZE-1)))
- return -EINVAL;
-
- vma->vm_flags |= (VM_IO | VM_DONTEXPAND);
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT,
- size, vma->vm_page_prot))
+ /* check for the case of a small BSR device and map one 4k page for it*/
+ if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE)
+ ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12,
+ vma->vm_page_prot);
+ else if (size <= dev->bsr_len)
+ ret = io_remap_pfn_range(vma, vma->vm_start,
+ dev->bsr_addr >> PAGE_SHIFT,
+ size, vma->vm_page_prot);
+ else
+ return -EINVAL;
+
+ if (ret)
return -EAGAIN;
return 0;
@@ -205,6 +214,11 @@ static int bsr_add_node(struct device_node *bn)
cur->bsr_stride = bsr_stride[i];
cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs);
+ /* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */
+ /* we can only map 4k of it, so only advertise the 4k in sysfs */
+ if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE)
+ cur->bsr_len = 4096;
+
switch(cur->bsr_bytes) {
case 8:
cur->bsr_type = BSR_8;
@@ -218,9 +232,11 @@ static int bsr_add_node(struct device_node *bn)
case 128:
cur->bsr_type = BSR_128;
break;
+ case 4096:
+ cur->bsr_type = BSR_4096;
+ break;
default:
cur->bsr_type = BSR_UNKNOWN;
- printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes);
}
cur->bsr_num = bsr_types[cur->bsr_type];
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 6e149f4a1ff..a0f68386c12 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -378,6 +378,17 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
+#ifdef CONFIG_PCI
+ /* Set the DMA ops to the ones from the PCI device, this could be
+ * fishy if we didn't know that on PowerMac it's always direct ops
+ * or iommu ops that will work fine
+ */
+ dev->ofdev.dev.archdata.dma_ops =
+ chip->lbus.pdev->dev.archdata.dma_ops;
+ dev->ofdev.dev.archdata.dma_data =
+ chip->lbus.pdev->dev.archdata.dma_data;
+#endif /* CONFIG_PCI */
+
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index a4fe7a38d9b..3bde56bce63 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -218,16 +218,14 @@ static void wdrtas_timer_keepalive(void)
*/
static int wdrtas_get_temperature(void)
{
- long result;
+ int result;
int temperature = 0;
- result = rtas_call(wdrtas_token_get_sensor_state, 2, 2,
- (void *)__pa(&temperature),
- WDRTAS_THERMAL_SENSOR, 0);
+ result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature);
if (result < 0)
printk(KERN_WARNING "wdrtas: reading the thermal sensor "
- "faild: %li\n", result);
+ "failed: %i\n", result);
else
temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */
diff --git a/scripts/dtc/.gitignore b/scripts/dtc/.gitignore
new file mode 100644
index 00000000000..095acb49a37
--- /dev/null
+++ b/scripts/dtc/.gitignore
@@ -0,0 +1,5 @@
+dtc
+dtc-lexer.lex.c
+dtc-parser.tab.c
+dtc-parser.tab.h
+