aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPekka Enberg <penberg@cs.helsinki.fi>2009-04-08 11:14:02 +0300
committerGreg Kroah-Hartman <gregkh@suse.de>2009-06-19 11:00:37 -0700
commitbdbb8839567c38f15bfba95e7df8a73a45f49067 (patch)
treefaeb6e1735bec68906b15b65732b2aa8015ee9d4
parentf592a859b2e9d17182bbef71c79851505e3592b8 (diff)
Staging: w35und: clean up comments in wbusb.c
Impact: cleanup Remove some useless comments and clean up others. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/staging/winbond/wbusb.c71
1 files changed, 25 insertions, 46 deletions
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index a23e7208249..29d5a6223c7 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -124,27 +124,17 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
printk("wbsoft_config called\n");
+ /* Should use channel_num, or something, as that is already pre-translated */
ch.band = 1;
- ch.ChanNo = 1; /* Should use channel_num, or something, as that is already pre-translated */
-
+ ch.ChanNo = 1;
hal_set_current_channel(&priv->sHwData, ch);
hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
-// hal_set_cap_info(&priv->sHwData, ?? );
-// hal_set_ssid(struct hw_data * pHwData, u8 * pssid, u8 ssid_len); ??
hal_set_accept_broadcast(&priv->sHwData, 1);
hal_set_accept_promiscuous(&priv->sHwData, 1);
hal_set_accept_multicast(&priv->sHwData, 1);
hal_set_accept_beacon(&priv->sHwData, 1);
hal_set_radio_mode(&priv->sHwData, 0);
- //hal_set_antenna_number( struct hw_data * pHwData, u8 number )
- //hal_set_rf_power(struct hw_data * pHwData, u8 PowerIndex)
-
-
-// hal_start_bss(&priv->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE); ??
-
-//void hal_set_rates(struct hw_data * pHwData, u8 * pbss_rates,
-// u8 length, unsigned char basic_rate_set)
return 0;
}
@@ -165,7 +155,7 @@ static u64 wbsoft_get_tsf(struct ieee80211_hw *dev)
static const struct ieee80211_ops wbsoft_ops = {
.tx = wbsoft_tx,
- .start = wbsoft_start, /* Start can be pretty much empty as we do wb35_hw_init() during probe? */
+ .start = wbsoft_start,
.stop = wbsoft_stop,
.add_interface = wbsoft_add_interface,
.remove_interface = wbsoft_remove_interface,
@@ -175,7 +165,6 @@ static const struct ieee80211_ops wbsoft_ops = {
.get_stats = wbsoft_get_stats,
.get_tx_stats = wbsoft_get_tx_stats,
.get_tsf = wbsoft_get_tsf,
-// conf_tx: hal_set_cwmin()/hal_set_cwmax;
};
static void hal_led_control(unsigned long data)
@@ -469,9 +458,8 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
struct hw_data * pHwData = &priv->sHwData;
u16 SoftwareSet;
- // Initial the variable
- pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME; // Setting Rx maximum MSDU life time
- pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; // Setting default fragment threshold
+ pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME;
+ pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
if (!Wb35Reg_initial(pHwData))
goto error_reg_destroy;
@@ -488,9 +476,6 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
add_timer(&pHwData->LEDTimer);
- //
- // For restrict to vendor's hardware
- //
SoftwareSet = hal_software_set( pHwData );
#ifdef Vendor2
@@ -526,12 +511,9 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
u8 HwRadioOff;
int err;
- //
- // Setting default value for Linux
- //
priv->sLocalPara.region_INF = REGION_AUTO;
priv->sLocalPara.TxRateMode = RATE_AUTO;
- priv->sLocalPara.bMacOperationMode = MODE_802_11_BG; // B/G mode
+ priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;
priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
@@ -541,12 +523,10 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
pHwData = &priv->sHwData;
hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
- //added by ws for wep key error detection
priv->sLocalPara.bWepKeyError= false;
priv->sLocalPara.bToSelfPacketReceived = false;
- priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
+ priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /* 2 seconds */
- // Initial USB hal
pHwData = &priv->sHwData;
err = hal_init_hardware(hw);
if (err)
@@ -559,7 +539,7 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
if (priv->sLocalPara.region_INF != REGION_AUTO)
priv->sLocalPara.region = priv->sLocalPara.region_INF;
else
- priv->sLocalPara.region = REGION_USA; //default setting
+ priv->sLocalPara.region = REGION_USA; /* default setting */
}
// Get Software setting flag from hal
@@ -567,32 +547,31 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
if (hal_software_set(pHwData) & 0x00000001)
priv->sLocalPara.boAntennaDiversity = true;
- // For MDS module
Mds_initial(priv);
- //=======================================
- // Initialize the SME, SCAN, MLME, ROAM
- //=======================================
-
- // If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
+ /*
+ * If no user-defined address in the registry, use the addresss
+ * "burned" on the NIC instead.
+ */
pMacAddr = priv->sLocalPara.ThisMacAddress;
pMacAddr2 = priv->sLocalPara.PermanentAddress;
- hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
+
+ /* Reading ethernet address from EEPROM */
+ hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );
if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
else {
- // Set the user define MAC address
+ /* Set the user define MAC address */
hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
}
- //get current antenna
priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
#endif
hal_get_hw_radio_off( pHwData );
- // Waiting for HAL setting OK
+ /* Waiting for HAL setting OK */
while (!hal_idle(pHwData))
msleep(10);
@@ -603,9 +582,8 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
- hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
- //set a tx power for reference.....
-// sme_set_tx_power_level(priv, 12); FIXME?
+ /* Notify hal that the driver is ready now. */
+ hal_driver_init_OK(pHwData) = 1;
error:
return err;
@@ -624,7 +602,7 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
usb_get_dev(udev);
- // 20060630.2 Check the device if it already be opened
+ /* Check the device if it already be opened */
nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
0x0, 0x400, &ltmp, 4, HZ*100 );
@@ -633,8 +611,9 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
goto error;
}
+ /* Is already initialized? */
ltmp = cpu_to_le32(ltmp);
- if (ltmp) { // Is already initialized?
+ if (ltmp) {
err = -EBUSY;
goto error;
}
@@ -711,14 +690,14 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
Mds_Destroy( adapter );
- // Turn off Rx and Tx hardware ability
+ /* Turn off Rx and Tx hardware ability */
hal_stop( &adapter->sHwData );
#ifdef _PE_USB_INI_DUMP_
printk("[w35und] Hal_stop O.K.\n");
#endif
- msleep(100);// Waiting Irp completed
+ /* Waiting Irp completed */
+ msleep(100);
- // Halt the HAL
hal_halt(&adapter->sHwData);
}