aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJeff Layton <jlayton@redhat.com>2007-11-20 23:19:03 +0000
committerSteve French <sfrench@us.ibm.com>2007-11-20 23:19:03 +0000
commitcea218054ad277d6c126890213afde07b4eb1602 (patch)
tree8bfbd3c7d8ab94d35ec749ed4e0d66b1f6b69101
parent2a97468024fb5b6eccee2a67a7796485c829343a (diff)
[CIFS] Fix potential data corruption when writing out cached dirty pages
Fix RedHat bug 329431 The idea here is separate "conscious" from "unconscious" flushes. Conscious flushes are those due to a fsync() or close(). Unconscious ones are flushes that occur as a side effect of some other operation or due to memory pressure. Currently, when an error occurs during an unconscious flush (ENOSPC or EIO), we toss out the page and don't preserve that error to report to the user when a conscious flush occurs. If after the unconscious flush, there are no more dirty pages for the inode, the conscious flush will simply return success even though there were previous errors when writing out pages. This can lead to data corruption. The easiest way to reproduce this is to mount up a CIFS share that's very close to being full or where the user is very close to quota. mv a file to the share that's slightly larger than the quota allows. The writes will all succeed (since they go to pagecache). The mv will do a setattr to set the new file's attributes. This calls filemap_write_and_wait, which will return an error since all of the pages can't be written out. Then later, when the flush and release ops occur, there are no more dirty pages in pagecache for the file and those operations return 0. mv then assumes that the file was written out correctly and deletes the original. CIFS already has a write_behind_rc variable where it stores the results from earlier flushes, but that value is only reported in cifs_close. Since the VFS ignores the return value from the release operation, this isn't helpful. We should be reporting this error during the flush operation. This patch does the following: 1) changes cifs_fsync to use filemap_write_and_wait and cifs_flush and also sync to check its return code. If it returns successful, they then check the value of write_behind_rc to see if an earlier flush had reported any errors. If so, they return that error and clear write_behind_rc. 2) sets write_behind_rc in a few other places where pages are written out as a side effect of other operations and the code waits on them. 3) changes cifs_setattr to only call filemap_write_and_wait for ATTR_SIZE changes. 4) makes cifs_writepages accurately distinguish between EIO and ENOSPC errors when writing out pages. Some simple testing indicates that the patch works as expected and that it fixes the reproduceable known problem. Acked-by: Dave Kleikamp <shaggy@austin.rr.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-rw-r--r--fs/cifs/CHANGES4
-rw-r--r--fs/cifs/README27
-rw-r--r--fs/cifs/cifsfs.c7
-rw-r--r--fs/cifs/file.c24
-rw-r--r--fs/cifs/inode.c26
5 files changed, 58 insertions, 30 deletions
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index e31aa74f7d9..a609599287a 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,7 +1,9 @@
Version 1.52
------------
Fix oops on second mount to server when null auth is used.
-Enable experimental Kerberos support
+Enable experimental Kerberos support. Return writebehind errors on flush
+and sync so that events like out of disk space get reported properly on
+cached files.
Version 1.51
------------
diff --git a/fs/cifs/README b/fs/cifs/README
index b806b11b556..bf11329ac78 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -225,12 +225,9 @@ If no password is provided, mount.cifs will prompt for password entry
Restrictions
============
-Servers must support the NTLM SMB dialect (which is the most recent, supported
-by Samba and Windows NT version 4, 2000 and XP and many other SMB/CIFS servers)
Servers must support either "pure-TCP" (port 445 TCP/IP CIFS connections) or RFC
-1001/1002 support for "Netbios-Over-TCP/IP." Neither of these is likely to be a
-problem as most servers support this. IPv6 support is planned for the future,
-and is almost complete.
+1001/1002 support for "Netbios-Over-TCP/IP." This is not likely to be a
+problem as most servers support this.
Valid filenames differ between Windows and Linux. Windows typically restricts
filenames which contain certain reserved characters (e.g.the character :
@@ -458,6 +455,8 @@ A partial list of the supported mount options follows:
byte range locks).
remount remount the share (often used to change from ro to rw mounts
or vice versa)
+ cifsacl Report mode bits (e.g. on stat) based on the Windows ACL for
+ the file. (EXPERIMENTAL)
servern Specify the server 's netbios name (RFC1001 name) to use
when attempting to setup a session to the server. This is
This is needed for mounting to some older servers (such
@@ -584,8 +583,8 @@ Experimental When set to 1 used to enable certain experimental
performance enhancement was disabled when
signing turned on in case buffer was modified
just before it was sent, also this flag will
- be used to use the new experimental sessionsetup
- code).
+ be used to use the new experimental directory change
+ notification code).
These experimental features and tracing can be enabled by changing flags in
/proc/fs/cifs (after the cifs module has been installed or built into the
@@ -608,7 +607,8 @@ the start of smb requests and responses can be enabled via:
Two other experimental features are under development. To test these
requires enabling CONFIG_CIFS_EXPERIMENTAL
- ipv6 enablement
+ cifsacl support needed to retrieve approximated mode bits based on
+ the contents on the CIFS ACL.
DNOTIFY fcntl: needed for support of directory change
notification and perhaps later for file leases)
@@ -625,10 +625,7 @@ that they represent all for that share, not just those for which the server
returned success.
Also note that "cat /proc/fs/cifs/DebugData" will display information about
-the active sessions and the shares that are mounted. Note: NTLMv2 enablement
-will not work since its implementation is not quite complete yet. Do not alter
-the ExtendedSecurity configuration value unless you are doing specific testing.
-Enabling extended security works to Windows 2000 Workstations and XP but not to
-Windows 2000 server or Samba since it does not usually send "raw NTLMSSP"
-(instead it sends NTLMSSP encapsulated in SPNEGO/GSSAPI, which support is not
-complete in the CIFS VFS yet).
+the active sessions and the shares that are mounted.
+Enabling Kerberos (extended security) works when CONFIG_CIFS_EXPERIMENTAL is enabled
+but requires a user space helper (from the Samba project). NTLM and NTLMv2 and
+LANMAN support do not require this helpr.
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 416dc9fe896..093beaa3900 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -266,6 +266,7 @@ cifs_alloc_inode(struct super_block *sb)
cifs_inode->cifsAttrs = 0x20; /* default */
atomic_set(&cifs_inode->inUse, 0);
cifs_inode->time = 0;
+ cifs_inode->write_behind_rc = 0;
/* Until the file is open and we have gotten oplock
info back from the server, can not assume caching of
file data or metadata */
@@ -852,7 +853,7 @@ static int cifs_oplock_thread(void *dummyarg)
struct cifsTconInfo *pTcon;
struct inode *inode;
__u16 netfid;
- int rc;
+ int rc, waitrc = 0;
set_freezable();
do {
@@ -884,9 +885,11 @@ static int cifs_oplock_thread(void *dummyarg)
filemap_fdatawrite(inode->i_mapping);
if (CIFS_I(inode)->clientCanCacheRead
== 0) {
- filemap_fdatawait(inode->i_mapping);
+ waitrc = filemap_fdatawait(inode->i_mapping);
invalidate_remote_inode(inode);
}
+ if (rc == 0)
+ rc = waitrc;
} else
rc = 0;
/* mutex_unlock(&inode->i_mutex);*/
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 80256419651..dd26e2759b1 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -130,7 +130,9 @@ static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
if (file->f_path.dentry->d_inode->i_mapping) {
/* BB no need to lock inode until after invalidate
since namei code should already have it locked? */
- filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
+ rc = filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
+ if (rc != 0)
+ CIFS_I(file->f_path.dentry->d_inode)->write_behind_rc = rc;
}
cFYI(1, ("invalidating remote inode since open detected it "
"changed"));
@@ -425,7 +427,9 @@ reopen_error_exit:
pCifsInode = CIFS_I(inode);
if (pCifsInode) {
if (can_flush) {
- filemap_write_and_wait(inode->i_mapping);
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc != 0)
+ CIFS_I(inode)->write_behind_rc = rc;
/* temporarily disable caching while we
go to server to get inode info */
pCifsInode->clientCanCacheAll = FALSE;
@@ -1367,7 +1371,10 @@ retry:
rc, bytes_written));
/* BB what if continued retry is
requested via mount flags? */
- set_bit(AS_EIO, &mapping->flags);
+ if (rc == -ENOSPC)
+ set_bit(AS_ENOSPC, &mapping->flags);
+ else
+ set_bit(AS_EIO, &mapping->flags);
} else {
cifs_stats_bytes_written(cifs_sb->tcon,
bytes_written);
@@ -1499,9 +1506,11 @@ int cifs_fsync(struct file *file, struct dentry *dentry, int datasync)
cFYI(1, ("Sync file - name: %s datasync: 0x%x",
dentry->d_name.name, datasync));
- rc = filemap_fdatawrite(inode->i_mapping);
- if (rc == 0)
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc == 0) {
+ rc = CIFS_I(inode)->write_behind_rc;
CIFS_I(inode)->write_behind_rc = 0;
+ }
FreeXid(xid);
return rc;
}
@@ -1553,8 +1562,11 @@ int cifs_flush(struct file *file, fl_owner_t id)
filemapfdatawrite appears easier for the time being */
rc = filemap_fdatawrite(inode->i_mapping);
- if (!rc) /* reset wb rc if we were able to write out dirty pages */
+ /* reset wb rc if we were able to write out dirty pages */
+ if (!rc) {
+ rc = CIFS_I(inode)->write_behind_rc;
CIFS_I(inode)->write_behind_rc = 0;
+ }
cFYI(1, ("Flush inode %p file %p rc %d", inode, file, rc));
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 7d907e84e03..e915eb1d2e6 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1233,7 +1233,7 @@ cifs_rename_exit:
int cifs_revalidate(struct dentry *direntry)
{
int xid;
- int rc = 0;
+ int rc = 0, wbrc = 0;
char *full_path;
struct cifs_sb_info *cifs_sb;
struct cifsInodeInfo *cifsInode;
@@ -1333,7 +1333,9 @@ int cifs_revalidate(struct dentry *direntry)
if (direntry->d_inode->i_mapping) {
/* do we need to lock inode until after invalidate completes
below? */
- filemap_fdatawrite(direntry->d_inode->i_mapping);
+ wbrc = filemap_fdatawrite(direntry->d_inode->i_mapping);
+ if (wbrc)
+ CIFS_I(direntry->d_inode)->write_behind_rc = wbrc;
}
if (invalidate_inode) {
/* shrink_dcache not necessary now that cifs dentry ops
@@ -1342,7 +1344,9 @@ int cifs_revalidate(struct dentry *direntry)
shrink_dcache_parent(direntry); */
if (S_ISREG(direntry->d_inode->i_mode)) {
if (direntry->d_inode->i_mapping)
- filemap_fdatawait(direntry->d_inode->i_mapping);
+ wbrc = filemap_fdatawait(direntry->d_inode->i_mapping);
+ if (wbrc)
+ CIFS_I(direntry->d_inode)->write_behind_rc = wbrc;
/* may eventually have to do this for open files too */
if (list_empty(&(cifsInode->openFileList))) {
/* changed on server - flush read ahead pages */
@@ -1485,10 +1489,20 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
/* BB check if we need to refresh inode from server now ? BB */
- /* need to flush data before changing file size on server */
- filemap_write_and_wait(direntry->d_inode->i_mapping);
-
if (attrs->ia_valid & ATTR_SIZE) {
+ /*
+ Flush data before changing file size on server. If the
+ flush returns error, store it to report later and continue.
+ BB: This should be smarter. Why bother flushing pages that
+ will be truncated anyway? Also, should we error out here if
+ the flush returns error?
+ */
+ rc = filemap_write_and_wait(direntry->d_inode->i_mapping);
+ if (rc != 0) {
+ CIFS_I(direntry->d_inode)->write_behind_rc = rc;
+ rc = 0;
+ }
+
/* To avoid spurious oplock breaks from server, in the case of
inodes that we already have open, avoid doing path based
setting of file size if we can do it by handle.