Extract chip specific code out of lasi_82596.c

Changes to last version:
- use netdev_alloc_skb
- make init_rx_bufs just fail and not panic, if skb alloc fails
- don/t free_irq, if request_irq failed

Thomas.

Extracted chip specific code out of lasi_82596.c and placed into a lib82596.c
to make it usable for other 82596 drivers

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

2 files changed, 1483 insertions, 1411 deletions

diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index 741780e14b2..efbae4b8398 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -86,93 +86,36 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/pdc.h>
-#include <asm/cache.h>
 #include <asm/parisc-device.h>
 
 #define LASI_82596_DRIVER_VERSION "LASI 82596 driver - Revision: 1.30"
 
-/* DEBUG flags
- */
-
-#define DEB_INIT	0x0001
-#define DEB_PROBE	0x0002
-#define DEB_SERIOUS	0x0004
-#define DEB_ERRORS	0x0008
-#define DEB_MULTI	0x0010
-#define DEB_TDR		0x0020
-#define DEB_OPEN	0x0040
-#define DEB_RESET	0x0080
-#define DEB_ADDCMD	0x0100
-#define DEB_STATUS	0x0200
-#define DEB_STARTTX	0x0400
-#define DEB_RXADDR	0x0800
-#define DEB_TXADDR	0x1000
-#define DEB_RXFRAME	0x2000
-#define DEB_INTS	0x4000
-#define DEB_STRUCT	0x8000
-#define DEB_ANY		0xffff
-
-
-#define DEB(x,y)	if (i596_debug & (x)) { y; }
-
-
-#define  CHECK_WBACK(priv, addr,len) \
-	do { dma_cache_sync((priv)->dev, (void *)addr, len, DMA_TO_DEVICE); } while (0)
-
-#define  CHECK_INV(priv, addr,len) \
-	do { dma_cache_sync((priv)->dev, (void *)addr, len, DMA_FROM_DEVICE); } while(0)
-
-#define  CHECK_WBACK_INV(priv, addr,len) \
-	do { dma_cache_sync((priv)->dev, (void *)addr, len, DMA_BIDIRECTIONAL); } while (0)
-
-
 #define PA_I82596_RESET		0	/* Offsets relative to LASI-LAN-Addr.*/
 #define PA_CPU_PORT_L_ACCESS	4
 #define PA_CHANNEL_ATTENTION	8
 
+#define OPT_SWAP_PORT	0x0001	/* Need to wordswp on the MPU port */
 
-/*
- * Define various macros for Channel Attention, word swapping etc., dependent
- * on architecture.  MVME and BVME are 680x0 based, otherwise it is Intel.
- */
+#define DMA_ALLOC                        dma_alloc_noncoherent
+#define DMA_FREE                         dma_free_noncoherent
+#define DMA_WBACK(ndev, addr, len) \
+	do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_TO_DEVICE); } while (0)
 
-#ifdef __BIG_ENDIAN
-#define WSWAPrfd(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPrbd(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPiscp(x) (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPscb(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPcmd(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPtbd(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPchar(x) (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define ISCP_BUSY	0x00010000
-#define MACH_IS_APRICOT	0
-#else
-#define WSWAPrfd(x)     ((struct i596_rfd *)(x))
-#define WSWAPrbd(x)     ((struct i596_rbd *)(x))
-#define WSWAPiscp(x)    ((struct i596_iscp *)(x))
-#define WSWAPscb(x)     ((struct i596_scb *)(x))
-#define WSWAPcmd(x)     ((struct i596_cmd *)(x))
-#define WSWAPtbd(x)     ((struct i596_tbd *)(x))
-#define WSWAPchar(x)    ((char *)(x))
-#define ISCP_BUSY	0x0001
-#define MACH_IS_APRICOT	1
-#endif
+#define DMA_INV(ndev, addr, len) \
+	do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_FROM_DEVICE); } while (0)
 
-/*
- * The MPU_PORT command allows direct access to the 82596. With PORT access
- * the following commands are available (p5-18). The 32-bit port command
- * must be word-swapped with the most significant word written first.
- * This only applies to VME boards.
- */
-#define PORT_RESET		0x00	/* reset 82596 */
-#define PORT_SELFTEST		0x01	/* selftest */
-#define PORT_ALTSCP		0x02	/* alternate SCB address */
-#define PORT_ALTDUMP		0x03	/* Alternate DUMP address */
+#define DMA_WBACK_INV(ndev, addr, len) \
+	do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_BIDIRECTIONAL); } while (0)
+
+#define SYSBUS      0x0000006c;
+
+/* big endian CPU, 82596 "big" endian mode */
+#define SWAP32(x)   (((u32)(x)<<16) | ((((u32)(x)))>>16))
+#define SWAP16(x)   (x)
 
-static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
+#include "lib82596.c"
 
 MODULE_AUTHOR("Richard Hirst");
 MODULE_DESCRIPTION("i82596 driver");
@@ -180,255 +123,15 @@ MODULE_LICENSE("GPL");
 module_param(i596_debug, int, 0);
 MODULE_PARM_DESC(i596_debug, "lasi_82596 debug mask");
 
-/* Copy frames shorter than rx_copybreak, otherwise pass on up in
- * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha).
- */
-static int rx_copybreak = 100;
-
-#define MAX_DRIVERS	4	/* max count of drivers */
-
-#define PKT_BUF_SZ	1536
-#define MAX_MC_CNT	64
-
-#define I596_NULL ((u32)0xffffffff)
-
-#define CMD_EOL		0x8000	/* The last command of the list, stop. */
-#define CMD_SUSP	0x4000	/* Suspend after doing cmd. */
-#define CMD_INTR	0x2000	/* Interrupt after doing cmd. */
-
-#define CMD_FLEX	0x0008	/* Enable flexible memory model */
-
-enum commands {
-	CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
-	CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
-};
-
-#define STAT_C		0x8000	/* Set to 0 after execution */
-#define STAT_B		0x4000	/* Command being executed */
-#define STAT_OK		0x2000	/* Command executed ok */
-#define STAT_A		0x1000	/* Command aborted */
-
-#define	 CUC_START	0x0100
-#define	 CUC_RESUME	0x0200
-#define	 CUC_SUSPEND    0x0300
-#define	 CUC_ABORT	0x0400
-#define	 RX_START	0x0010
-#define	 RX_RESUME	0x0020
-#define	 RX_SUSPEND	0x0030
-#define	 RX_ABORT	0x0040
-
-#define TX_TIMEOUT	5
-
-#define OPT_SWAP_PORT	0x0001	/* Need to wordswp on the MPU port */
-
-
-struct i596_reg {
-	unsigned short porthi;
-	unsigned short portlo;
-	u32            ca;
-};
-
-#define EOF		0x8000
-#define SIZE_MASK	0x3fff
-
-struct i596_tbd {
-	unsigned short size;
-	unsigned short pad;
-	dma_addr_t     next;
-	dma_addr_t     data;
-	u32 cache_pad[5];		/* Total 32 bytes... */
-};
-
-/* The command structure has two 'next' pointers; v_next is the address of
- * the next command as seen by the CPU, b_next is the address of the next
- * command as seen by the 82596.  The b_next pointer, as used by the 82596
- * always references the status field of the next command, rather than the
- * v_next field, because the 82596 is unaware of v_next.  It may seem more
- * logical to put v_next at the end of the structure, but we cannot do that
- * because the 82596 expects other fields to be there, depending on command
- * type.
- */
-
-struct i596_cmd {
-	struct i596_cmd *v_next;	/* Address from CPUs viewpoint */
-	unsigned short status;
-	unsigned short command;
-	dma_addr_t     b_next;	/* Address from i596 viewpoint */
-};
-
-struct tx_cmd {
-	struct i596_cmd cmd;
-	dma_addr_t     tbd;
-	unsigned short size;
-	unsigned short pad;
-	struct sk_buff *skb;		/* So we can free it after tx */
-	dma_addr_t dma_addr;
-#ifdef __LP64__
-	u32 cache_pad[6];		/* Total 64 bytes... */
-#else
-	u32 cache_pad[1];		/* Total 32 bytes... */
-#endif
-};
-
-struct tdr_cmd {
-	struct i596_cmd cmd;
-	unsigned short status;
-	unsigned short pad;
-};
-
-struct mc_cmd {
-	struct i596_cmd cmd;
-	short mc_cnt;
-	char mc_addrs[MAX_MC_CNT*6];
-};
-
-struct sa_cmd {
-	struct i596_cmd cmd;
-	char eth_addr[8];
-};
-
-struct cf_cmd {
-	struct i596_cmd cmd;
-	char i596_config[16];
-};
-
-struct i596_rfd {
-	unsigned short stat;
-	unsigned short cmd;
-	dma_addr_t     b_next;	/* Address from i596 viewpoint */
-	dma_addr_t     rbd;
-	unsigned short count;
-	unsigned short size;
-	struct i596_rfd *v_next;	/* Address from CPUs viewpoint */
-	struct i596_rfd *v_prev;
-#ifndef __LP64__
-	u32 cache_pad[2];		/* Total 32 bytes... */
-#endif
-};
-
-struct i596_rbd {
-    /* hardware data */
-    unsigned short count;
-    unsigned short zero1;
-    dma_addr_t     b_next;
-    dma_addr_t     b_data;		/* Address from i596 viewpoint */
-    unsigned short size;
-    unsigned short zero2;
-    /* driver data */
-    struct sk_buff *skb;
-    struct i596_rbd *v_next;
-    dma_addr_t     b_addr;		/* This rbd addr from i596 view */
-    unsigned char *v_data;		/* Address from CPUs viewpoint */
-					/* Total 32 bytes... */
-#ifdef __LP64__
-    u32 cache_pad[4];
-#endif
-};
-
-/* These values as chosen so struct i596_private fits in one page... */
-
-#define TX_RING_SIZE 32
-#define RX_RING_SIZE 16
-
-struct i596_scb {
-	unsigned short status;
-	unsigned short command;
-	dma_addr_t    cmd;
-	dma_addr_t    rfd;
-	u32           crc_err;
-	u32           align_err;
-	u32           resource_err;
-	u32           over_err;
-	u32           rcvdt_err;
-	u32           short_err;
-	unsigned short t_on;
-	unsigned short t_off;
-};
-
-struct i596_iscp {
-	u32           stat;
-	dma_addr_t    scb;
-};
-
-struct i596_scp {
-	u32           sysbus;
-	u32            pad;
-	dma_addr_t    iscp;
-};
-
-struct i596_private {
-	volatile struct i596_scp scp		__attribute__((aligned(32)));
-	volatile struct i596_iscp iscp		__attribute__((aligned(32)));
-	volatile struct i596_scb scb		__attribute__((aligned(32)));
-	struct sa_cmd sa_cmd			__attribute__((aligned(32)));
-	struct cf_cmd cf_cmd			__attribute__((aligned(32)));
-	struct tdr_cmd tdr_cmd			__attribute__((aligned(32)));
-	struct mc_cmd mc_cmd			__attribute__((aligned(32)));
-	struct i596_rfd rfds[RX_RING_SIZE]	__attribute__((aligned(32)));
-	struct i596_rbd rbds[RX_RING_SIZE]	__attribute__((aligned(32)));
-	struct tx_cmd tx_cmds[TX_RING_SIZE]	__attribute__((aligned(32)));
-	struct i596_tbd tbds[TX_RING_SIZE]	__attribute__((aligned(32)));
-	u32    stat;
-	int last_restart;
-	struct i596_rfd *rfd_head;
-	struct i596_rbd *rbd_head;
-	struct i596_cmd *cmd_tail;
-	struct i596_cmd *cmd_head;
-	int cmd_backlog;
-	u32    last_cmd;
-	struct net_device_stats stats;
-	int next_tx_cmd;
-	int options;
-	spinlock_t lock;
-	dma_addr_t dma_addr;
-	struct device *dev;
-};
-
-static const char init_setup[] =
-{
-	0x8E,			/* length, prefetch on */
-	0xC8,			/* fifo to 8, monitor off */
-	0x80,			/* don't save bad frames */
-	0x2E,			/* No source address insertion, 8 byte preamble */
-	0x00,			/* priority and backoff defaults */
-	0x60,			/* interframe spacing */
-	0x00,			/* slot time LSB */
-	0xf2,			/* slot time and retries */
-	0x00,			/* promiscuous mode */
-	0x00,			/* collision detect */
-	0x40,			/* minimum frame length */
-	0xff,
-	0x00,
-	0x7f /*  *multi IA */ };
-
-static int i596_open(struct net_device *dev);
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t i596_interrupt(int irq, void *dev_id);
-static int i596_close(struct net_device *dev);
-static struct net_device_stats *i596_get_stats(struct net_device *dev);
-static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
-static void i596_tx_timeout (struct net_device *dev);
-static void print_eth(unsigned char *buf, char *str);
-static void set_multicast_list(struct net_device *dev);
-
-static int rx_ring_size = RX_RING_SIZE;
-static int ticks_limit = 100;
-static int max_cmd_backlog = TX_RING_SIZE-1;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void i596_poll_controller(struct net_device *dev);
-#endif
-
-
-static inline void CA(struct net_device *dev)
+static inline void ca(struct net_device *dev)
 {
 	gsc_writel(0, dev->base_addr + PA_CHANNEL_ATTENTION);
 }
 
 
-static inline void MPU_PORT(struct net_device *dev, int c, dma_addr_t x)
+static void mpu_port(struct net_device *dev, int c, dma_addr_t x)
 {
-	struct i596_private *lp = dev->priv;
+	struct i596_private *lp = netdev_priv(dev);
 
 	u32 v = (u32) (c) | (u32) (x);
 	u16 a, b;
@@ -446,1078 +149,15 @@ static inline void MPU_PORT(struct net_device *dev, int c, dma_addr_t x)
 	gsc_writel(b, dev->base_addr + PA_CPU_PORT_L_ACCESS);
 }
 
-
-static inline int wait_istat(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
-{
-	CHECK_INV(lp, &(lp->iscp), sizeof(struct i596_iscp));
-	while (--delcnt && lp->iscp.stat) {
-		udelay(10);
-		CHECK_INV(lp, &(lp->iscp), sizeof(struct i596_iscp));
-	}
-	if (!delcnt) {
-		printk("%s: %s, iscp.stat %04x, didn't clear\n",
-		     dev->name, str, lp->iscp.stat);
-		return -1;
-	}
-	else
-		return 0;
-}
-
-
-static inline int wait_cmd(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
-{
-	CHECK_INV(lp, &(lp->scb), sizeof(struct i596_scb));
-	while (--delcnt && lp->scb.command) {
-		udelay(10);
-		CHECK_INV(lp, &(lp->scb), sizeof(struct i596_scb));
-	}
-	if (!delcnt) {
-		printk("%s: %s, status %4.4x, cmd %4.4x.\n",
-		     dev->name, str, lp->scb.status, lp->scb.command);
-		return -1;
-	}
-	else
-		return 0;
-}
-
-
-static void i596_display_data(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	struct i596_cmd *cmd;
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-
-	printk("lp and scp at %p, .sysbus = %08x, .iscp = %08x\n",
-	       &lp->scp, lp->scp.sysbus, lp->scp.iscp);
-	printk("iscp at %p, iscp.stat = %08x, .scb = %08x\n",
-	       &lp->iscp, lp->iscp.stat, lp->iscp.scb);
-	printk("scb at %p, scb.status = %04x, .command = %04x,"
-		" .cmd = %08x, .rfd = %08x\n",
-	       &lp->scb, lp->scb.status, lp->scb.command,
-		lp->scb.cmd, lp->scb.rfd);
-	printk("   errors: crc %x, align %x, resource %x,"
-               " over %x, rcvdt %x, short %x\n",
-		lp->scb.crc_err, lp->scb.align_err, lp->scb.resource_err,
-		lp->scb.over_err, lp->scb.rcvdt_err, lp->scb.short_err);
-	cmd = lp->cmd_head;
-	while (cmd != NULL) {
-		printk("cmd at %p, .status = %04x, .command = %04x, .b_next = %08x\n",
-		  cmd, cmd->status, cmd->command, cmd->b_next);
-		cmd = cmd->v_next;
-	}
-	rfd = lp->rfd_head;
-	printk("rfd_head = %p\n", rfd);
-	do {
-		printk("   %p .stat %04x, .cmd %04x, b_next %08x, rbd %08x,"
-                        " count %04x\n",
-			rfd, rfd->stat, rfd->cmd, rfd->b_next, rfd->rbd,
-			rfd->count);
-		rfd = rfd->v_next;
-	} while (rfd != lp->rfd_head);
-	rbd = lp->rbd_head;
-	printk("rbd_head = %p\n", rbd);
-	do {
-		printk("   %p .count %04x, b_next %08x, b_data %08x, size %04x\n",
-			rbd, rbd->count, rbd->b_next, rbd->b_data, rbd->size);
-		rbd = rbd->v_next;
-	} while (rbd != lp->rbd_head);
-	CHECK_INV(lp, lp, sizeof(struct i596_private));
-}
-
-
-#if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
-static void i596_error(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
-
-	pcc2[0x28] = 1;
-	pcc2[0x2b] = 0x1d;
-	printk("%s: Error interrupt\n", dev->name);
-	i596_display_data(dev);
-}
-#endif
-
-#define virt_to_dma(lp,v) ((lp)->dma_addr + (dma_addr_t)((unsigned long)(v)-(unsigned long)(lp)))
-
-static inline void init_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	int i;
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-
-	/* First build the Receive Buffer Descriptor List */
-
-	for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
-		dma_addr_t dma_addr;
-		struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ + 4);
-
-		if (skb == NULL)
-			panic("%s: alloc_skb() failed", __FILE__);
-		skb_reserve(skb, 2);
-		dma_addr = dma_map_single(lp->dev, skb->data,PKT_BUF_SZ,
-					  DMA_FROM_DEVICE);
-		skb->dev = dev;
-		rbd->v_next = rbd+1;
-		rbd->b_next = WSWAPrbd(virt_to_dma(lp,rbd+1));
-		rbd->b_addr = WSWAPrbd(virt_to_dma(lp,rbd));
-		rbd->skb = skb;
-		rbd->v_data = skb->data;
-		rbd->b_data = WSWAPchar(dma_addr);
-		rbd->size = PKT_BUF_SZ;
-	}
-	lp->rbd_head = lp->rbds;
-	rbd = lp->rbds + rx_ring_size - 1;
-	rbd->v_next = lp->rbds;
-	rbd->b_next = WSWAPrbd(virt_to_dma(lp,lp->rbds));
-
-	/* Now build the Receive Frame Descriptor List */
-
-	for (i = 0, rfd = lp->rfds; i < rx_ring_size; i++, rfd++) {
-		rfd->rbd = I596_NULL;
-		rfd->v_next = rfd+1;
-		rfd->v_prev = rfd-1;
-		rfd->b_next = WSWAPrfd(virt_to_dma(lp,rfd+1));
-		rfd->cmd = CMD_FLEX;
-	}
-	lp->rfd_head = lp->rfds;
-	lp->scb.rfd = WSWAPrfd(virt_to_dma(lp,lp->rfds));
-	rfd = lp->rfds;
-	rfd->rbd = WSWAPrbd(virt_to_dma(lp,lp->rbd_head));
-	rfd->v_prev = lp->rfds + rx_ring_size - 1;
-	rfd = lp->rfds + rx_ring_size - 1;
-	rfd->v_next = lp->rfds;
-	rfd->b_next = WSWAPrfd(virt_to_dma(lp,lp->rfds));
-	rfd->cmd = CMD_EOL|CMD_FLEX;
-
-	CHECK_WBACK_INV(lp, lp, sizeof(struct i596_private));
-}
-
-static inline void remove_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	struct i596_rbd *rbd;
-	int i;
-
-	for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
-		if (rbd->skb == NULL)
-			break;
-		dma_unmap_single(lp->dev,
-				 (dma_addr_t)WSWAPchar(rbd->b_data),
-				 PKT_BUF_SZ, DMA_FROM_DEVICE);
-		dev_kfree_skb(rbd->skb);
-	}
-}
-
-
-static void rebuild_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	int i;
-
-	/* Ensure rx frame/buffer descriptors are tidy */
-
-	for (i = 0; i < rx_ring_size; i++) {
-		lp->rfds[i].rbd = I596_NULL;
-		lp->rfds[i].cmd = CMD_FLEX;
-	}
-	lp->rfds[rx_ring_size-1].cmd = CMD_EOL|CMD_FLEX;
-	lp->rfd_head = lp->rfds;
-	lp->scb.rfd = WSWAPrfd(virt_to_dma(lp,lp->rfds));
-	lp->rbd_head = lp->rbds;
-	lp->rfds[0].rbd = WSWAPrbd(virt_to_dma(lp,lp->rbds));
-
-	CHECK_WBACK_INV(lp, lp, sizeof(struct i596_private));
-}
-
-
-static int init_i596_mem(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	unsigned long flags;
-
-	disable_irq(dev->irq);	/* disable IRQs from LAN */
-	DEB(DEB_INIT,
-		printk("RESET 82596 port: %lx (with IRQ %d disabled)\n",
-		       (dev->base_addr + PA_I82596_RESET),
-		       dev->irq));
-
-	gsc_writel(0, (dev->base_addr + PA_I82596_RESET)); /* Hard Reset */
-	udelay(100);			/* Wait 100us - seems to help */
-
-	/* change the scp address */
-
-	lp->last_cmd = jiffies;
-
-
-	lp->scp.sysbus = 0x0000006c;
-	lp->scp.iscp = WSWAPiscp(virt_to_dma(lp,&(lp->iscp)));
-	lp->iscp.scb = WSWAPscb(virt_to_dma(lp,&(lp->scb)));
-	lp->iscp.stat = ISCP_BUSY;
-	lp->cmd_backlog = 0;
-
-	lp->cmd_head = NULL;
-        lp->scb.cmd = I596_NULL;
-
-	DEB(DEB_INIT, printk("%s: starting i82596.\n", dev->name));
-
-	CHECK_WBACK(lp, &(lp->scp), sizeof(struct i596_scp));
-	CHECK_WBACK(lp, &(lp->iscp), sizeof(struct i596_iscp));
-
-	MPU_PORT(dev, PORT_ALTSCP, virt_to_dma(lp,&lp->scp));
-
-	CA(dev);
-
-	if (wait_istat(dev, lp, 1000, "initialization timed out"))
-		goto failed;
-	DEB(DEB_INIT, printk("%s: i82596 initialization successful\n", dev->name));
-
-	/* Ensure rx frame/buffer descriptors are tidy */
-	rebuild_rx_bufs(dev);
-
-	lp->scb.command = 0;
-	CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-
-	enable_irq(dev->irq);	/* enable IRQs from LAN */
-
-	DEB(DEB_INIT, printk("%s: queuing CmdConfigure\n", dev->name));
-	memcpy(lp->cf_cmd.i596_config, init_setup, sizeof(init_setup));
-	lp->cf_cmd.cmd.command = CmdConfigure;
-	CHECK_WBACK(lp, &(lp->cf_cmd), sizeof(struct cf_cmd));
-	i596_add_cmd(dev, &lp->cf_cmd.cmd);
-
-	DEB(DEB_INIT, printk("%s: queuing CmdSASetup\n", dev->name));
-	memcpy(lp->sa_cmd.eth_addr, dev->dev_addr, 6);
-	lp->sa_cmd.cmd.command = CmdSASetup;
-	CHECK_WBACK(lp, &(lp->sa_cmd), sizeof(struct sa_cmd));
-	i596_add_cmd(dev, &lp->sa_cmd.cmd);
-
-	DEB(DEB_INIT, printk("%s: queuing CmdTDR\n", dev->name));
-	lp->tdr_cmd.cmd.command = CmdTDR;
-	CHECK_WBACK(lp, &(lp->tdr_cmd), sizeof(struct tdr_cmd));
-	i596_add_cmd(dev, &lp->tdr_cmd.cmd);
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	if (wait_cmd(dev, lp, 1000, "timed out waiting to issue RX_START")) {
-		spin_unlock_irqrestore (&lp->lock, flags);
-		goto failed;
-	}
-	DEB(DEB_INIT, printk("%s: Issuing RX_START\n", dev->name));
-	lp->scb.command = RX_START;
-	lp->scb.rfd = WSWAPrfd(virt_to_dma(lp,lp->rfds));
-	CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-
-	CA(dev);
-
-	spin_unlock_irqrestore (&lp->lock, flags);
-
-	if (wait_cmd(dev, lp, 1000, "RX_START not processed"))
-		goto failed;
-	DEB(DEB_INIT, printk("%s: Receive unit started OK\n", dev->name));
-
-	return 0;
-
-failed:
-	printk("%s: Failed to initialise 82596\n", dev->name);
-	MPU_PORT(dev, PORT_RESET, 0);
-	return -1;
-}
-
-
-static inline int i596_rx(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-	int frames = 0;
-
-	DEB(DEB_RXFRAME, printk("i596_rx(), rfd_head %p, rbd_head %p\n",
-			lp->rfd_head, lp->rbd_head));
-
-
-	rfd = lp->rfd_head;		/* Ref next frame to check */
-
-	CHECK_INV(lp, rfd, sizeof(struct i596_rfd));
-	while ((rfd->stat) & STAT_C) {	/* Loop while complete frames */
-		if (rfd->rbd == I596_NULL)
-			rbd = NULL;
-		else if (rfd->rbd == lp->rbd_head->b_addr) {
-			rbd = lp->rbd_head;
-			CHECK_INV(lp, rbd, sizeof(struct i596_rbd));
-		}
-		else {
-			printk("%s: rbd chain broken!\n", dev->name);
-			/* XXX Now what? */
-			rbd = NULL;
-		}
-		DEB(DEB_RXFRAME, printk("  rfd %p, rfd.rbd %08x, rfd.stat %04x\n",
-			rfd, rfd->rbd, rfd->stat));
-
-		if (rbd != NULL && ((rfd->stat) & STAT_OK)) {
-			/* a good frame */
-			int pkt_len = rbd->count & 0x3fff;
-			struct sk_buff *skb = rbd->skb;
-			int rx_in_place = 0;
-
-			DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));
-			frames++;
-
-			/* Check if the packet is long enough to just accept
-			 * without copying to a properly sized skbuff.
-			 */
-
-			if (pkt_len > rx_copybreak) {
-				struct sk_buff *newskb;
-				dma_addr_t dma_addr;
-
-				dma_unmap_single(lp->dev,(dma_addr_t)WSWAPchar(rbd->b_data), PKT_BUF_SZ, DMA_FROM_DEVICE);
-				/* Get fresh skbuff to replace filled one. */
-				newskb = dev_alloc_skb(PKT_BUF_SZ + 4);
-				if (newskb == NULL) {
-					skb = NULL;	/* drop pkt */
-					goto memory_squeeze;
-				}
-				skb_reserve(newskb, 2);
-
-				/* Pass up the skb already on the Rx ring. */
-				skb_put(skb, pkt_len);
-				rx_in_place = 1;
-				rbd->skb = newskb;
-				newskb->dev = dev;
-				dma_addr = dma_map_single(lp->dev, newskb->data, PKT_BUF_SZ, DMA_FROM_DEVICE);
-				rbd->v_data = newskb->data;
-				rbd->b_data = WSWAPchar(dma_addr);
-				CHECK_WBACK_INV(lp, rbd, sizeof(struct i596_rbd));
-			}
-			else
-				skb = dev_alloc_skb(pkt_len + 2);
-memory_squeeze:
-			if (skb == NULL) {
-				/* XXX tulip.c can defer packets here!! */
-				printk("%s: i596_rx Memory squeeze, dropping packet.\n", dev->name);
-				lp->stats.rx_dropped++;
-			}
-			else {
-				if (!rx_in_place) {
-					/* 16 byte align the data fields */
-					dma_sync_single_for_cpu(lp->dev, (dma_addr_t)WSWAPchar(rbd->b_data), PKT_BUF_SZ, DMA_FROM_DEVICE);
-					skb_reserve(skb, 2);
-					memcpy(skb_put(skb,pkt_len), rbd->v_data, pkt_len);
-					dma_sync_single_for_device(lp->dev, (dma_addr_t)WSWAPchar(rbd->b_data), PKT_BUF_SZ, DMA_FROM_DEVICE);
-				}
-				skb->len = pkt_len;
-				skb->protocol=eth_type_trans(skb,dev);
-				netif_rx(skb);
-				dev->last_rx = jiffies;
-				lp->stats.rx_packets++;
-				lp->stats.rx_bytes+=pkt_len;
-			}
-		}
-		else {
-			DEB(DEB_ERRORS, printk("%s: Error, rfd.stat = 0x%04x\n",
-					dev->name, rfd->stat));
-			lp->stats.rx_errors++;
-			if ((rfd->stat) & 0x0001)
-				lp->stats.collisions++;
-			if ((rfd->stat) & 0x0080)
-				lp->stats.rx_length_errors++;
-			if ((rfd->stat) & 0x0100)
-				lp->stats.rx_over_errors++;
-			if ((rfd->stat) & 0x0200)
-				lp->stats.rx_fifo_errors++;
-			if ((rfd->stat) & 0x0400)
-				lp->stats.rx_frame_errors++;
-			if ((rfd->stat) & 0x0800)
-				lp->stats.rx_crc_errors++;
-			if ((rfd->stat) & 0x1000)
-				lp->stats.rx_length_errors++;
-		}
-
-		/* Clear the buffer descriptor count and EOF + F flags */
-
-		if (rbd != NULL && (rbd->count & 0x4000)) {
-			rbd->count = 0;
-			lp->rbd_head = rbd->v_next;
-			CHECK_WBACK_INV(lp, rbd, sizeof(struct i596_rbd));
-		}
-
-		/* Tidy the frame descriptor, marking it as end of list */
-
-		rfd->rbd = I596_NULL;
-		rfd->stat = 0;
-		rfd->cmd = CMD_EOL|CMD_FLEX;
-		rfd->count = 0;
-
-		/* Remove end-of-list from old end descriptor */
-
-		rfd->v_prev->cmd = CMD_FLEX;
-
-		/* Update record of next frame descriptor to process */
-
-		lp->scb.rfd = rfd->b_next;
-		lp->rfd_head = rfd->v_next;
-		CHECK_WBACK_INV(lp, rfd->v_prev, sizeof(struct i596_rfd));
-		CHECK_WBACK_INV(lp, rfd, sizeof(struct i596_rfd));
-		rfd = lp->rfd_head;
-		CHECK_INV(lp, rfd, sizeof(struct i596_rfd));
-	}
-
-	DEB(DEB_RXFRAME, printk("frames %d\n", frames));
-
-	return 0;
-}
-
-
-static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
-{
-	struct i596_cmd *ptr;
-
-	while (lp->cmd_head != NULL) {
-		ptr = lp->cmd_head;
-		lp->cmd_head = ptr->v_next;
-		lp->cmd_backlog--;
-
-		switch ((ptr->command) & 0x7) {
-		case CmdTx:
-			{
-				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
-				struct sk_buff *skb = tx_cmd->skb;
-				dma_unmap_single(lp->dev, tx_cmd->dma_addr, skb->len, DMA_TO_DEVICE);
-
-				dev_kfree_skb(skb);
-
-				lp->stats.tx_errors++;
-				lp->stats.tx_aborted_errors++;
-
-				ptr->v_next = NULL;
-				ptr->b_next = I596_NULL;
-				tx_cmd->cmd.command = 0;  /* Mark as free */
-				break;
-			}
-		default:
-			ptr->v_next = NULL;
-			ptr->b_next = I596_NULL;
-		}
-		CHECK_WBACK_INV(lp, ptr, sizeof(struct i596_cmd));
-	}
-
-	wait_cmd(dev, lp, 100, "i596_cleanup_cmd timed out");
-	lp->scb.cmd = I596_NULL;
-	CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-}
-
-
-static inline void i596_reset(struct net_device *dev, struct i596_private *lp)
-{
-	unsigned long flags;
-
-	DEB(DEB_RESET, printk("i596_reset\n"));
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	wait_cmd(dev, lp, 100, "i596_reset timed out");
-
-	netif_stop_queue(dev);
-
-	/* FIXME: this command might cause an lpmc */
-	lp->scb.command = CUC_ABORT | RX_ABORT;
-	CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-	CA(dev);
-
-	/* wait for shutdown */
-	wait_cmd(dev, lp, 1000, "i596_reset 2 timed out");
-	spin_unlock_irqrestore (&lp->lock, flags);
-
-	i596_cleanup_cmd(dev,lp);
-	i596_rx(dev);
-
-	netif_start_queue(dev);
-	init_i596_mem(dev);
-}
-
-
-static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
-{
-	struct i596_private *lp = dev->priv;
-	unsigned long flags;
-
-	DEB(DEB_ADDCMD, printk("i596_add_cmd cmd_head %p\n", lp->cmd_head));
-
-	cmd->status = 0;
-	cmd->command |= (CMD_EOL | CMD_INTR);
-	cmd->v_next = NULL;
-	cmd->b_next = I596_NULL;
-	CHECK_WBACK(lp, cmd, sizeof(struct i596_cmd));
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	if (lp->cmd_head != NULL) {
-		lp->cmd_tail->v_next = cmd;
-		lp->cmd_tail->b_next = WSWAPcmd(virt_to_dma(lp,&cmd->status));
-		CHECK_WBACK(lp, lp->cmd_tail, sizeof(struct i596_cmd));
-	} else {
-		lp->cmd_head = cmd;
-		wait_cmd(dev, lp, 100, "i596_add_cmd timed out");
-		lp->scb.cmd = WSWAPcmd(virt_to_dma(lp,&cmd->status));
-		lp->scb.command = CUC_START;
-		CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-		CA(dev);
-	}
-	lp->cmd_tail = cmd;
-	lp->cmd_backlog++;
-
-	spin_unlock_irqrestore (&lp->lock, flags);
-
-	if (lp->cmd_backlog > max_cmd_backlog) {
-		unsigned long tickssofar = jiffies - lp->last_cmd;
-
-		if (tickssofar < ticks_limit)
-			return;
-
-		printk("%s: command unit timed out, status resetting.\n", dev->name);
-#if 1
-		i596_reset(dev, lp);
-#endif
-	}
-}
-
-#if 0
-/* this function makes a perfectly adequate probe...  but we have a
-   device list */
-static int i596_test(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	volatile int *tint;
-	u32 data;
-
-	tint = (volatile int *)(&(lp->scp));
-	data = virt_to_dma(lp,tint);
-
-	tint[1] = -1;
-	CHECK_WBACK(lp, tint, PAGE_SIZE);
-
-	MPU_PORT(dev, 1, data);
-
-	for(data = 1000000; data; data--) {
-		CHECK_INV(lp, tint, PAGE_SIZE);
-		if(tint[1] != -1)
-			break;
-
-	}
-
-	printk("i596_test result %d\n", tint[1]);
-
-}
-#endif
-
-
-static int i596_open(struct net_device *dev)
-{
-	DEB(DEB_OPEN, printk("%s: i596_open() irq %d.\n", dev->name, dev->irq));
-
-	if (request_irq(dev->irq, &i596_interrupt, 0, "i82596", dev)) {
-		printk("%s: IRQ %d not free\n", dev->name, dev->irq);
-		goto out;
-	}
-
-	init_rx_bufs(dev);
-
-	if (init_i596_mem(dev)) {
-		printk("%s: Failed to init memory\n", dev->name);
-		goto out_remove_rx_bufs;
-	}
-
-	netif_start_queue(dev);
-
-	return 0;
-
-out_remove_rx_bufs:
-	remove_rx_bufs(dev);
-	free_irq(dev->irq, dev);
-out:
-	return -EAGAIN;
-}
-
-static void i596_tx_timeout (struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-
-	/* Transmitter timeout, serious problems. */
-	DEB(DEB_ERRORS, printk("%s: transmit timed out, status resetting.\n",
-			dev->name));
-
-	lp->stats.tx_errors++;
-
-	/* Try to restart the adaptor */
-	if (lp->last_restart == lp->stats.tx_packets) {
-		DEB(DEB_ERRORS, printk("Resetting board.\n"));
-		/* Shutdown and restart */
-		i596_reset (dev, lp);
-	} else {
-		/* Issue a channel attention signal */
-		DEB(DEB_ERRORS, printk("Kicking board.\n"));
-		lp->scb.command = CUC_START | RX_START;
-		CHECK_WBACK_INV(lp, &(lp->scb), sizeof(struct i596_scb));
-		CA (dev);
-		lp->last_restart = lp->stats.tx_packets;
-	}
-
-	dev->trans_start = jiffies;
-	netif_wake_queue (dev);
-}
-
-
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	struct tx_cmd *tx_cmd;
-	struct i596_tbd *tbd;
-	short length = skb->len;
-	dev->trans_start = jiffies;
-
-	DEB(DEB_STARTTX, printk("%s: i596_start_xmit(%x,%p) called\n", dev->name,
-				skb->len, skb->data));
-
-	if (length < ETH_ZLEN) {
-		if (skb_padto(skb, ETH_ZLEN))
-			return 0;
-		length = ETH_ZLEN;
-	}
-
-	netif_stop_queue(dev);
-
-	tx_cmd = lp->tx_cmds + lp->next_tx_cmd;
-	tbd = lp->tbds + lp->next_tx_cmd;
-
-	if (tx_cmd->cmd.command) {
-		DEB(DEB_ERRORS, printk("%s: xmit ring full, dropping packet.\n",
-				dev->name));
-		lp->stats.tx_dropped++;
-
-		dev_kfree_skb(skb);
-	} else {
-		if (++lp->next_tx_cmd == TX_RING_SIZE)
-			lp->next_tx_cmd = 0;
-		tx_cmd->tbd = WSWAPtbd(virt_to_dma(lp,tbd));
-		tbd->next = I596_NULL;
-
-		tx_cmd->cmd.command = CMD_FLEX | CmdTx;
-		tx_cmd->skb = skb;
-
-		tx_cmd->pad = 0;
-		tx_cmd->size = 0;
-		tbd->pad = 0;
-		tbd->size = EOF | length;
-
-		tx_cmd->dma_addr = dma_map_single(lp->dev, skb->data, skb->len,
-				DMA_TO_DEVICE);
-		tbd->data = WSWAPchar(tx_cmd->dma_addr);
-
-		DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));
-		CHECK_WBACK_INV(lp, tx_cmd, sizeof(struct tx_cmd));
-		CHECK_WBACK_INV(lp, tbd, sizeof(struct i596_tbd));
-		i596_add_cmd(dev, &tx_cmd->cmd);
-
-		lp->stats.tx_packets++;
-		lp->stats.tx_bytes += length;
-	}
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-static void print_eth(unsigned char *add, char *str)
-{
-	int i;
-
-	printk("i596 0x%p, ", add);
-	for (i = 0; i < 6; i++)
-		printk(" %02X", add[i + 6]);
-	printk(" -->");
-	for (i = 0; i < 6; i++)
-		printk(" %02X", add[i]);
-	printk(" %02X%02X, %s\n", add[12], add[13], str);
-}
-
-
 #define LAN_PROM_ADDR	0xF0810000
 
-static int __devinit i82596_probe(struct net_device *dev,
-				  struct device *gen_dev)
-{
-	int i;
-	struct i596_private *lp;
-	char eth_addr[6];
-	dma_addr_t dma_addr;
-
-	/* This lot is ensure things have been cache line aligned. */
-	BUILD_BUG_ON(sizeof(struct i596_rfd) != 32);
-	BUILD_BUG_ON(sizeof(struct i596_rbd) &  31);
-	BUILD_BUG_ON(sizeof(struct tx_cmd)   &  31);
-	BUILD_BUG_ON(sizeof(struct i596_tbd) != 32);
-#ifndef __LP64__
-	BUILD_BUG_ON(sizeof(struct i596_private) > 4096);
-#endif
-
-	if (!dev->base_addr || !dev->irq)
-		return -ENODEV;
-
-	if (pdc_lan_station_id(eth_addr, dev->base_addr)) {
-		for (i=0; i < 6; i++) {
-			eth_addr[i] = gsc_readb(LAN_PROM_ADDR + i);
-		}
-		printk(KERN_INFO "%s: MAC of HP700 LAN read from EEPROM\n", __FILE__);
-	}
-
-	dev->mem_start = (unsigned long) dma_alloc_noncoherent(gen_dev,
-		sizeof(struct i596_private), &dma_addr, GFP_KERNEL);
-	if (!dev->mem_start) {
-		printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = eth_addr[i];
-
-	/* The 82596-specific entries in the device structure. */
-	dev->open = i596_open;
-	dev->stop = i596_close;
-	dev->hard_start_xmit = i596_start_xmit;
-	dev->get_stats = i596_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-	dev->tx_timeout = i596_tx_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = i596_poll_controller;
-#endif
-
-	dev->priv = (void *)(dev->mem_start);
-
-	lp = dev->priv;
-	memset(lp, 0, sizeof(struct i596_private));
-
-	lp->scb.command = 0;
-	lp->scb.cmd = I596_NULL;
-	lp->scb.rfd = I596_NULL;
-	spin_lock_init(&lp->lock);
-	lp->dma_addr = dma_addr;
-	lp->dev = gen_dev;
-
-	CHECK_WBACK_INV(lp, dev->mem_start, sizeof(struct i596_private));
-
-	i = register_netdev(dev);
-	if (i) {
-		lp = dev->priv;
-		dma_free_noncoherent(lp->dev, sizeof(struct i596_private),
-				    (void *)dev->mem_start, lp->dma_addr);
-		return i;
-	};
-
-	DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
-	for (i = 0; i < 6; i++)
-		DEB(DEB_PROBE, printk(" %2.2X", dev->dev_addr[i]));
-	DEB(DEB_PROBE, printk(" IRQ %d.\n", dev->irq));
-	DEB(DEB_INIT, printk(KERN_INFO "%s: lp at 0x%p (%d bytes), lp->scb at 0x%p\n",
-		dev->name, lp, (int)sizeof(struct i596_private), &lp->scb));
-
-	return 0;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void i596_poll_controller(struct net_device *dev)
-{
-	disable_irq(dev->irq);
-	i596_interrupt(dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-static irqreturn_t i596_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct i596_private *lp;
-	unsigned short status, ack_cmd = 0;
-
-	if (dev == NULL) {
-		printk("%s: irq %d for unknown device.\n", __FUNCTION__, irq);
-		return IRQ_NONE;
-	}
-
-	lp = dev->priv;
-
-	spin_lock (&lp->lock);
-
-	wait_cmd(dev, lp, 100, "i596 interrupt, timeout");
-	status = lp->scb.status;
-
-	DEB(DEB_INTS, printk("%s: i596 interrupt, IRQ %d, status %4.4x.\n",
-			dev->name, irq, status));
-
-	ack_cmd = status & 0xf000;
-
-	if (!ack_cmd) {
-		DEB(DEB_ERRORS, printk("%s: interrupt with no events\n", dev->name));
-		spin_unlock (&lp->lock);
-		return IRQ_NONE;
-	}
-
-	if ((status & 0x8000) || (status & 0x2000)) {
-		struct i596_cmd *ptr;
-
-		if ((status & 0x8000))
-			DEB(DEB_INTS, printk("%s: i596 interrupt completed command.\n", dev->name));
-		if ((status & 0x2000))
-			DEB(DEB_INTS, printk("%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
-
-		while (lp->cmd_head != NULL) {
-			CHECK_INV(lp, lp->cmd_head, sizeof(struct i596_cmd));
-			if (!(lp->cmd_head->status & STAT_C))
-				break;
-
-			ptr = lp->cmd_head;
-
-			DEB(DEB_STATUS, printk("cmd_head->status = %04x, ->command = %04x\n",
-				       lp->cmd_head->status, lp->cmd_head->command));
-			lp->cmd_head = ptr->v_next;
-			lp->cmd_backlog--;
-
-			switch ((ptr->command) & 0x7) {
-			case CmdTx:
-			    {
-				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
-				struct sk_buff *skb = tx_cmd->skb;
-
-				if ((ptr->status) & STAT_OK) {
-					DEB(DEB_TXADDR, print_eth(skb->data, "tx-done"));
-				} else {
-					lp->stats.tx_errors++;
-					if ((ptr->status) & 0x0020)
-						lp->stats.collisions++;
-					if (!((ptr->status) & 0x0040))
-						lp->stats.tx_heartbeat_errors++;
-					if ((ptr->status) & 0x0400)
-						lp->stats.tx_carrier_errors++;
-					if ((ptr->status) & 0x0800)
-						lp->stats.collisions++;
-					if ((ptr->status) & 0x1000)
-						lp->stats.tx_aborted_errors++;
-				}
-				dma_unmap_single(lp->dev, tx_cmd->dma_addr, skb->len, DMA_TO_DEVICE);
-				dev_kfree_skb_irq(skb);
-
-				tx_cmd->cmd.command = 0; /* Mark free */
-				break;
-			    }
-			case CmdTDR:
-			    {
-				unsigned short status = ((struct tdr_cmd *)ptr)->status;
-
-				if (status & 0x8000) {
-					DEB(DEB_ANY, printk("%s: link ok.\n", dev->name));
-				} else {
-					if (status & 0x4000)
-						printk("%s: Transceiver problem.\n", dev->name);
-					if (status & 0x2000)
-						printk("%s: Termination problem.\n", dev->name);
-					if (status & 0x1000)
-						printk("%s: Short circuit.\n", dev->name);
-
-					DEB(DEB_TDR, printk("%s: Time %d.\n", dev->name, status & 0x07ff));
-				}
-				break;
-			    }
-			case CmdConfigure:
-				/* Zap command so set_multicast_list() knows it is free */
-				ptr->command = 0;
-				break;
-			}
-			ptr->v_next = NULL;
-		        ptr->b_next = I596_NULL;
-			CHECK_WBACK(lp, ptr, sizeof(struct i596_cmd));
-			lp->last_cmd = jiffies;
-		}
-
-		/* This mess is arranging that only the last of any outstanding
-		 * commands has the interrupt bit set.  Should probably really
-		 * only add to the cmd queue when the CU is stopped.
-		 */
-		ptr = lp->cmd_head;
-		while ((ptr != NULL) && (ptr != lp->cmd_tail)) {
-			struct i596_cmd *prev = ptr;
-
-			ptr->command &= 0x1fff;
-			ptr = ptr->v_next;
-			CHECK_WBACK_INV(lp, prev, sizeof(struct i596_cmd));
-		}
-
-		if ((lp->cmd_head != NULL))
-			ack_cmd |= CUC_START;
-		lp->scb.cmd = WSWAPcmd(virt_to_dma(lp,&lp->cmd_head->status));
-		CHECK_WBACK_INV(lp, &lp->scb, sizeof(struct i596_scb));
-	}
-	if ((status & 0x1000) || (status & 0x4000)) {
-		if ((status & 0x4000))
-			DEB(DEB_INTS, printk("%s: i596 interrupt received a frame.\n", dev->name));
-		i596_rx(dev);
-		/* Only RX_START if stopped - RGH 07-07-96 */
-		if (status & 0x1000) {
-			if (netif_running(dev)) {
-				DEB(DEB_ERRORS, printk("%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
-				ack_cmd |= RX_START;
-				lp->stats.rx_errors++;
-				lp->stats.rx_fifo_errors++;
-				rebuild_rx_bufs(dev);
-			}
-		}
-	}
-	wait_cmd(dev, lp, 100, "i596 interrupt, timeout");
-	lp->scb.command = ack_cmd;
-	CHECK_WBACK(lp, &lp->scb, sizeof(struct i596_scb));
-
-	/* DANGER: I suspect that some kind of interrupt
-	 acknowledgement aside from acking the 82596 might be needed
-	 here...  but it's running acceptably without */
-
-	CA(dev);
-
-	wait_cmd(dev, lp, 100, "i596 interrupt, exit timeout");
-	DEB(DEB_INTS, printk("%s: exiting interrupt.\n", dev->name));
-
-	spin_unlock (&lp->lock);
-	return IRQ_HANDLED;
-}
-
-static int i596_close(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	unsigned long flags;
-
-	netif_stop_queue(dev);
-
-	DEB(DEB_INIT, printk("%s: Shutting down ethercard, status was %4.4x.\n",
-		       dev->name, lp->scb.status));
-
-	spin_lock_irqsave(&lp->lock, flags);
-
-	wait_cmd(dev, lp, 100, "close1 timed out");
-	lp->scb.command = CUC_ABORT | RX_ABORT;
-	CHECK_WBACK(lp, &lp->scb, sizeof(struct i596_scb));
-
-	CA(dev);
-
-	wait_cmd(dev, lp, 100, "close2 timed out");
-	spin_unlock_irqrestore(&lp->lock, flags);
-	DEB(DEB_STRUCT,i596_display_data(dev));
-	i596_cleanup_cmd(dev,lp);
-
-	disable_irq(dev->irq);
-
-	free_irq(dev->irq, dev);
-	remove_rx_bufs(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *
- i596_get_stats(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-
-	return &lp->stats;
-}
-
-/*
- *    Set or clear the multicast filter for this adaptor.
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	int config = 0, cnt;
-
-	DEB(DEB_MULTI, printk("%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
-		dev->name, dev->mc_count, dev->flags & IFF_PROMISC ? "ON" : "OFF",
-		dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
-
-	if ((dev->flags & IFF_PROMISC) && !(lp->cf_cmd.i596_config[8] & 0x01)) {
-		lp->cf_cmd.i596_config[8] |= 0x01;
-		config = 1;
-	}
-	if (!(dev->flags & IFF_PROMISC) && (lp->cf_cmd.i596_config[8] & 0x01)) {
-		lp->cf_cmd.i596_config[8] &= ~0x01;
-		config = 1;
-	}
-	if ((dev->flags & IFF_ALLMULTI) && (lp->cf_cmd.i596_config[11] & 0x20)) {
-		lp->cf_cmd.i596_config[11] &= ~0x20;
-		config = 1;
-	}
-	if (!(dev->flags & IFF_ALLMULTI) && !(lp->cf_cmd.i596_config[11] & 0x20)) {
-		lp->cf_cmd.i596_config[11] |= 0x20;
-		config = 1;
-	}
-	if (config) {
-		if (lp->cf_cmd.cmd.command)
-			printk("%s: config change request already queued\n",
-			       dev->name);
-		else {
-			lp->cf_cmd.cmd.command = CmdConfigure;
-			CHECK_WBACK_INV(lp, &lp->cf_cmd, sizeof(struct cf_cmd));
-			i596_add_cmd(dev, &lp->cf_cmd.cmd);
-		}
-	}
-
-	cnt = dev->mc_count;
-	if (cnt > MAX_MC_CNT)
-	{
-		cnt = MAX_MC_CNT;
-		printk("%s: Only %d multicast addresses supported",
-			dev->name, cnt);
-	}
-
-	if (dev->mc_count > 0) {
-		struct dev_mc_list *dmi;
-		unsigned char *cp;
-		struct mc_cmd *cmd;
-
-		cmd = &lp->mc_cmd;
-		cmd->cmd.command = CmdMulticastList;
-		cmd->mc_cnt = dev->mc_count * 6;
-		cp = cmd->mc_addrs;
-		for (dmi = dev->mc_list; cnt && dmi != NULL; dmi = dmi->next, cnt--, cp += 6) {
-			memcpy(cp, dmi->dmi_addr, 6);
-			if (i596_debug > 1)
-				DEB(DEB_MULTI, printk("%s: Adding address %02x:%02x:%02x:%02x:%02x:%02x\n",
-						dev->name, cp[0],cp[1],cp[2],cp[3],cp[4],cp[5]));
-		}
-		CHECK_WBACK_INV(lp, &lp->mc_cmd, sizeof(struct mc_cmd));
-		i596_add_cmd(dev, &cmd->cmd);
-	}
-}
-
-static int debug = -1;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "lasi_82596 debug mask");
-
-static int num_drivers;
-static struct net_device *netdevs[MAX_DRIVERS];
-
 static int __devinit
 lan_init_chip(struct parisc_device *dev)
 {
 	struct	net_device *netdevice;
+	struct i596_private *lp;
 	int	retval;
-
-	if (num_drivers >= MAX_DRIVERS) {
-		/* max count of possible i82596 drivers reached */
-		return -ENOMEM;
-	}
-
-	if (num_drivers == 0)
-		printk(KERN_INFO LASI_82596_DRIVER_VERSION "\n");
+	int i;
 
 	if (!dev->irq) {
 		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
@@ -1528,28 +168,45 @@ lan_init_chip(struct parisc_device *dev)
 	printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start,
 			dev->irq);
 
-	netdevice = alloc_etherdev(0);
+	netdevice = alloc_etherdev(sizeof(struct i596_private));
 	if (!netdevice)
 		return -ENOMEM;
+	SET_NETDEV_DEV(netdevice, &dev->dev);
+	parisc_set_drvdata (dev, netdevice);
 
 	netdevice->base_addr = dev->hpa.start;
 	netdevice->irq = dev->irq;
 
-	retval = i82596_probe(netdevice, &dev->dev);
+	if (pdc_lan_station_id(netdevice->dev_addr, netdevice->base_addr)) {
+		for (i = 0; i < 6; i++) {
+			netdevice->dev_addr[i] = gsc_readb(LAN_PROM_ADDR + i);
+		}
+		printk(KERN_INFO
+		       "%s: MAC of HP700 LAN read from EEPROM\n", __FILE__);
+	}
+
+	lp = netdev_priv(netdevice);
+	lp->options = dev->id.sversion == 0x72 ? OPT_SWAP_PORT : 0;
+
+	retval = i82596_probe(netdevice);
 	if (retval) {
 		free_netdev(netdevice);
 		return -ENODEV;
 	}
-
-	if (dev->id.sversion == 0x72) {
-		((struct i596_private *)netdevice->priv)->options = OPT_SWAP_PORT;
-	}
-
-	netdevs[num_drivers++] = netdevice;
-
 	return retval;
 }
 
+static int __devexit lan_remove_chip (struct parisc_device *pdev)
+{
+	struct net_device *dev = parisc_get_drvdata(pdev);
+	struct i596_private *lp = netdev_priv(dev);
+
+	unregister_netdev (dev);
+	DMA_FREE(&pdev->dev, sizeof(struct i596_private),
+		 (void *)lp->dma, lp->dma_addr);
+	free_netdev (dev);
+	return 0;
+}
 
 static struct parisc_device_id lan_tbl[] = {
 	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008a },
@@ -1563,12 +220,12 @@ static struct parisc_driver lan_driver = {
 	.name		= "lasi_82596",
 	.id_table	= lan_tbl,
 	.probe		= lan_init_chip,
+	.remove         = __devexit_p(lan_remove_chip),
 };
 
 static int __devinit lasi_82596_init(void)
 {
-	if (debug >= 0)
-		i596_debug = debug;
+	printk(KERN_INFO LASI_82596_DRIVER_VERSION "\n");
 	return register_parisc_driver(&lan_driver);
 }
 
@@ -1576,25 +233,6 @@ module_init(lasi_82596_init);
 
 static void __exit lasi_82596_exit(void)
 {
-	int i;
-
-	for (i=0; i<MAX_DRIVERS; i++) {
-		struct i596_private *lp;
-		struct net_device *netdevice;
-
-		netdevice = netdevs[i];
-		if (!netdevice)
-			continue;
-
-		unregister_netdev(netdevice);
-
-		lp = netdevice->priv;
-		dma_free_noncoherent(lp->dev, sizeof(struct i596_private),
-				       (void *)netdevice->mem_start, lp->dma_addr);
-		free_netdev(netdevice);
-	}
-	num_drivers = 0;
-
 	unregister_parisc_driver(&lan_driver);
 }
 
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
new file mode 100644
index 00000000000..5884f5bd04a
--- /dev/null
+++ b/drivers/net/lib82596.c
@@ -0,0 +1,1434 @@
+/* lasi_82596.c -- driver for the intel 82596 ethernet controller, as
+   munged into HPPA boxen .
+
+   This driver is based upon 82596.c, original credits are below...
+   but there were too many hoops which HP wants jumped through to
+   keep this code in there in a sane manner.
+
+   3 primary sources of the mess --
+   1) hppa needs *lots* of cacheline flushing to keep this kind of
+   MMIO running.
+
+   2) The 82596 needs to see all of its pointers as their physical
+   address.  Thus virt_to_bus/bus_to_virt are *everywhere*.
+
+   3) The implementation HP is using seems to be significantly pickier
+   about when and how the command and RX units are started.  some
+   command ordering was changed.
+
+   Examination of the mach driver leads one to believe that there
+   might be a saner way to pull this off...  anyone who feels like a
+   full rewrite can be my guest.
+
+   Split 02/13/2000 Sam Creasey (sammy@oh.verio.com)
+
+   02/01/2000  Initial modifications for parisc by Helge Deller (deller@gmx.de)
+   03/02/2000  changes for better/correct(?) cache-flushing (deller)
+*/
+
+/* 82596.c: A generic 82596 ethernet driver for linux. */
+/*
+   Based on Apricot.c
+   Written 1994 by Mark Evans.
+   This driver is for the Apricot 82596 bus-master interface
+
+   Modularised 12/94 Mark Evans
+
+
+   Modified to support the 82596 ethernet chips on 680x0 VME boards.
+   by Richard Hirst <richard@sleepie.demon.co.uk>
+   Renamed to be 82596.c
+
+   980825:  Changed to receive directly in to sk_buffs which are
+   allocated at open() time.  Eliminates copy on incoming frames
+   (small ones are still copied).  Shared data now held in a
+   non-cached page, so we can run on 68060 in copyback mode.
+
+   TBD:
+   * look at deferring rx frames rather than discarding (as per tulip)
+   * handle tx ring full as per tulip
+   * performace test to tune rx_copybreak
+
+   Most of my modifications relate to the braindead big-endian
+   implementation by Intel.  When the i596 is operating in
+   'big-endian' mode, it thinks a 32 bit value of 0x12345678
+   should be stored as 0x56781234.  This is a real pain, when
+   you have linked lists which are shared by the 680x0 and the
+   i596.
+
+   Driver skeleton
+   Written 1993 by Donald Becker.
+   Copyright 1993 United States Government as represented by the Director,
+   National Security Agency. This software may only be used and distributed
+   according to the terms of the GNU General Public License as modified by SRC,
+   incorporated herein by reference.
+
+   The author may be reached as becker@scyld.com, or C/O
+   Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
+
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+/* DEBUG flags
+ */
+
+#define DEB_INIT	0x0001
+#define DEB_PROBE	0x0002
+#define DEB_SERIOUS	0x0004
+#define DEB_ERRORS	0x0008
+#define DEB_MULTI	0x0010
+#define DEB_TDR		0x0020
+#define DEB_OPEN	0x0040
+#define DEB_RESET	0x0080
+#define DEB_ADDCMD	0x0100
+#define DEB_STATUS	0x0200
+#define DEB_STARTTX	0x0400
+#define DEB_RXADDR	0x0800
+#define DEB_TXADDR	0x1000
+#define DEB_RXFRAME	0x2000
+#define DEB_INTS	0x4000
+#define DEB_STRUCT	0x8000
+#define DEB_ANY		0xffff
+
+
+#define DEB(x, y)	if (i596_debug & (x)) { y; }
+
+
+/*
+ * The MPU_PORT command allows direct access to the 82596. With PORT access
+ * the following commands are available (p5-18). The 32-bit port command
+ * must be word-swapped with the most significant word written first.
+ * This only applies to VME boards.
+ */
+#define PORT_RESET		0x00	/* reset 82596 */
+#define PORT_SELFTEST		0x01	/* selftest */
+#define PORT_ALTSCP		0x02	/* alternate SCB address */
+#define PORT_ALTDUMP		0x03	/* Alternate DUMP address */
+
+static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
+
+/* Copy frames shorter than rx_copybreak, otherwise pass on up in
+ * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha).
+ */
+static int rx_copybreak = 100;
+
+#define PKT_BUF_SZ	1536
+#define MAX_MC_CNT	64
+
+#define ISCP_BUSY	0x0001
+
+#define I596_NULL ((u32)0xffffffff)
+
+#define CMD_EOL		0x8000	/* The last command of the list, stop. */
+#define CMD_SUSP	0x4000	/* Suspend after doing cmd. */
+#define CMD_INTR	0x2000	/* Interrupt after doing cmd. */
+
+#define CMD_FLEX	0x0008	/* Enable flexible memory model */
+
+enum commands {
+	CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
+	CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
+};
+
+#define STAT_C		0x8000	/* Set to 0 after execution */
+#define STAT_B		0x4000	/* Command being executed */
+#define STAT_OK		0x2000	/* Command executed ok */
+#define STAT_A		0x1000	/* Command aborted */
+
+#define	 CUC_START	0x0100
+#define	 CUC_RESUME	0x0200
+#define	 CUC_SUSPEND    0x0300
+#define	 CUC_ABORT	0x0400
+#define	 RX_START	0x0010
+#define	 RX_RESUME	0x0020
+#define	 RX_SUSPEND	0x0030
+#define	 RX_ABORT	0x0040
+
+#define TX_TIMEOUT	5
+
+
+struct i596_reg {
+	unsigned short porthi;
+	unsigned short portlo;
+	u32            ca;
+};
+
+#define EOF		0x8000
+#define SIZE_MASK	0x3fff
+
+struct i596_tbd {
+	unsigned short size;
+	unsigned short pad;
+	dma_addr_t     next;
+	dma_addr_t     data;
+	u32 cache_pad[5];		/* Total 32 bytes... */
+};
+
+/* The command structure has two 'next' pointers; v_next is the address of
+ * the next command as seen by the CPU, b_next is the address of the next
+ * command as seen by the 82596.  The b_next pointer, as used by the 82596
+ * always references the status field of the next command, rather than the
+ * v_next field, because the 82596 is unaware of v_next.  It may seem more
+ * logical to put v_next at the end of the structure, but we cannot do that
+ * because the 82596 expects other fields to be there, depending on command
+ * type.
+ */
+
+struct i596_cmd {
+	struct i596_cmd *v_next;	/* Address from CPUs viewpoint */
+	unsigned short status;
+	unsigned short command;
+	dma_addr_t     b_next;	/* Address from i596 viewpoint */
+};
+
+struct tx_cmd {
+	struct i596_cmd cmd;
+	dma_addr_t     tbd;
+	unsigned short size;
+	unsigned short pad;
+	struct sk_buff *skb;		/* So we can free it after tx */
+	dma_addr_t dma_addr;
+#ifdef __LP64__
+	u32 cache_pad[6];		/* Total 64 bytes... */
+#else
+	u32 cache_pad[1];		/* Total 32 bytes... */
+#endif
+};
+
+struct tdr_cmd {
+	struct i596_cmd cmd;
+	unsigned short status;
+	unsigned short pad;
+};
+
+struct mc_cmd {
+	struct i596_cmd cmd;
+	short mc_cnt;
+	char mc_addrs[MAX_MC_CNT*6];
+};
+
+struct sa_cmd {
+	struct i596_cmd cmd;
+	char eth_addr[8];
+};
+
+struct cf_cmd {
+	struct i596_cmd cmd;
+	char i596_config[16];
+};
+
+struct i596_rfd {
+	unsigned short stat;
+	unsigned short cmd;
+	dma_addr_t     b_next;	/* Address from i596 viewpoint */
+	dma_addr_t     rbd;
+	unsigned short count;
+	unsigned short size;
+	struct i596_rfd *v_next;	/* Address from CPUs viewpoint */
+	struct i596_rfd *v_prev;
+#ifndef __LP64__
+	u32 cache_pad[2];		/* Total 32 bytes... */
+#endif
+};
+
+struct i596_rbd {
+    /* hardware data */
+    unsigned short count;
+    unsigned short zero1;
+    dma_addr_t     b_next;
+    dma_addr_t     b_data;		/* Address from i596 viewpoint */
+    unsigned short size;
+    unsigned short zero2;
+    /* driver data */
+    struct sk_buff *skb;
+    struct i596_rbd *v_next;
+    dma_addr_t     b_addr;		/* This rbd addr from i596 view */
+    unsigned char *v_data;		/* Address from CPUs viewpoint */
+					/* Total 32 bytes... */
+#ifdef __LP64__
+    u32 cache_pad[4];
+#endif
+};
+
+/* These values as chosen so struct i596_dma fits in one page... */
+
+#define TX_RING_SIZE 32
+#define RX_RING_SIZE 16
+
+struct i596_scb {
+	unsigned short status;
+	unsigned short command;
+	dma_addr_t    cmd;
+	dma_addr_t    rfd;
+	u32           crc_err;
+	u32           align_err;
+	u32           resource_err;
+	u32           over_err;
+	u32           rcvdt_err;
+	u32           short_err;
+	unsigned short t_on;
+	unsigned short t_off;
+};
+
+struct i596_iscp {
+	u32           stat;
+	dma_addr_t    scb;
+};
+
+struct i596_scp {
+	u32           sysbus;
+	u32           pad;
+	dma_addr_t    iscp;
+};
+
+struct i596_dma {
+	struct i596_scp scp		        __attribute__((aligned(32)));
+	volatile struct i596_iscp iscp		__attribute__((aligned(32)));
+	volatile struct i596_scb scb		__attribute__((aligned(32)));
+	struct sa_cmd sa_cmd			__attribute__((aligned(32)));
+	struct cf_cmd cf_cmd			__attribute__((aligned(32)));
+	struct tdr_cmd tdr_cmd			__attribute__((aligned(32)));
+	struct mc_cmd mc_cmd			__attribute__((aligned(32)));
+	struct i596_rfd rfds[RX_RING_SIZE]	__attribute__((aligned(32)));
+	struct i596_rbd rbds[RX_RING_SIZE]	__attribute__((aligned(32)));
+	struct tx_cmd tx_cmds[TX_RING_SIZE]	__attribute__((aligned(32)));
+	struct i596_tbd tbds[TX_RING_SIZE]	__attribute__((aligned(32)));
+};
+
+struct i596_private {
+	struct i596_dma *dma;
+	u32    stat;
+	int last_restart;
+	struct i596_rfd *rfd_head;
+	struct i596_rbd *rbd_head;
+	struct i596_cmd *cmd_tail;
+	struct i596_cmd *cmd_head;
+	int cmd_backlog;
+	u32    last_cmd;
+	struct net_device_stats stats;
+	int next_tx_cmd;
+	int options;
+	spinlock_t lock;       /* serialize access to chip */
+	dma_addr_t dma_addr;
+	void __iomem *mpu_port;
+	void __iomem *ca;
+};
+
+static const char init_setup[] =
+{
+	0x8E,		/* length, prefetch on */
+	0xC8,		/* fifo to 8, monitor off */
+	0x80,		/* don't save bad frames */
+	0x2E,		/* No source address insertion, 8 byte preamble */
+	0x00,		/* priority and backoff defaults */
+	0x60,		/* interframe spacing */
+	0x00,		/* slot time LSB */
+	0xf2,		/* slot time and retries */
+	0x00,		/* promiscuous mode */
+	0x00,		/* collision detect */
+	0x40,		/* minimum frame length */
+	0xff,
+	0x00,
+	0x7f /*  *multi IA */ };
+
+static int i596_open(struct net_device *dev);
+static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t i596_interrupt(int irq, void *dev_id);
+static int i596_close(struct net_device *dev);
+static struct net_device_stats *i596_get_stats(struct net_device *dev);
+static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
+static void i596_tx_timeout (struct net_device *dev);
+static void print_eth(unsigned char *buf, char *str);
+static void set_multicast_list(struct net_device *dev);
+static inline void ca(struct net_device *dev);
+static void mpu_port(struct net_device *dev, int c, dma_addr_t x);
+
+static int rx_ring_size = RX_RING_SIZE;
+static int ticks_limit = 100;
+static int max_cmd_backlog = TX_RING_SIZE-1;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void i596_poll_controller(struct net_device *dev);
+#endif
+
+
+static inline int wait_istat(struct net_device *dev, struct i596_dma *dma, int delcnt, char *str)
+{
+	DMA_INV(dev, &(dma->iscp), sizeof(struct i596_iscp));
+	while (--delcnt && dma->iscp.stat) {
+		udelay(10);
+		DMA_INV(dev, &(dma->iscp), sizeof(struct i596_iscp));
+	}
+	if (!delcnt) {
+		printk(KERN_ERR "%s: %s, iscp.stat %04x, didn't clear\n",
+		     dev->name, str, SWAP16(dma->iscp.stat));
+		return -1;
+	} else
+		return 0;
+}
+
+
+static inline int wait_cmd(struct net_device *dev, struct i596_dma *dma, int delcnt, char *str)
+{
+	DMA_INV(dev, &(dma->scb), sizeof(struct i596_scb));
+	while (--delcnt && dma->scb.command) {
+		udelay(10);
+		DMA_INV(dev, &(dma->scb), sizeof(struct i596_scb));
+	}
+	if (!delcnt) {
+		printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
+		       dev->name, str,
+		       SWAP16(dma->scb.status),
+		       SWAP16(dma->scb.command));
+		return -1;
+	} else
+		return 0;
+}
+
+
+static void i596_display_data(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	struct i596_cmd *cmd;
+	struct i596_rfd *rfd;
+	struct i596_rbd *rbd;
+
+	printk(KERN_DEBUG "lp and scp at %p, .sysbus = %08x, .iscp = %08x\n",
+	       &dma->scp, dma->scp.sysbus, SWAP32(dma->scp.iscp));
+	printk(KERN_DEBUG "iscp at %p, iscp.stat = %08x, .scb = %08x\n",
+	       &dma->iscp, SWAP32(dma->iscp.stat), SWAP32(dma->iscp.scb));
+	printk(KERN_DEBUG "scb at %p, scb.status = %04x, .command = %04x,"
+		" .cmd = %08x, .rfd = %08x\n",
+	       &dma->scb, SWAP16(dma->scb.status), SWAP16(dma->scb.command),
+		SWAP16(dma->scb.cmd), SWAP32(dma->scb.rfd));
+	printk(KERN_DEBUG "   errors: crc %x, align %x, resource %x,"
+	       " over %x, rcvdt %x, short %x\n",
+	       SWAP32(dma->scb.crc_err), SWAP32(dma->scb.align_err),
+	       SWAP32(dma->scb.resource_err), SWAP32(dma->scb.over_err),
+	       SWAP32(dma->scb.rcvdt_err), SWAP32(dma->scb.short_err));
+	cmd = lp->cmd_head;
+	while (cmd != NULL) {
+		printk(KERN_DEBUG
+		       "cmd at %p, .status = %04x, .command = %04x,"
+		       " .b_next = %08x\n",
+		       cmd, SWAP16(cmd->status), SWAP16(cmd->command),
+		       SWAP32(cmd->b_next));
+		cmd = cmd->v_next;
+	}
+	rfd = lp->rfd_head;
+	printk(KERN_DEBUG "rfd_head = %p\n", rfd);
+	do {
+		printk(KERN_DEBUG
+		       "   %p .stat %04x, .cmd %04x, b_next %08x, rbd %08x,"
+		       " count %04x\n",
+		       rfd, SWAP16(rfd->stat), SWAP16(rfd->cmd),
+		       SWAP32(rfd->b_next), SWAP32(rfd->rbd),
+		       SWAP16(rfd->count));
+		rfd = rfd->v_next;
+	} while (rfd != lp->rfd_head);
+	rbd = lp->rbd_head;
+	printk(KERN_DEBUG "rbd_head = %p\n", rbd);
+	do {
+		printk(KERN_DEBUG
+		       "   %p .count %04x, b_next %08x, b_data %08x,"
+		       " size %04x\n",
+			rbd, SWAP16(rbd->count), SWAP32(rbd->b_next),
+		       SWAP32(rbd->b_data), SWAP16(rbd->size));
+		rbd = rbd->v_next;
+	} while (rbd != lp->rbd_head);
+	DMA_INV(dev, dma, sizeof(struct i596_dma));
+}
+
+
+#define virt_to_dma(lp, v) ((lp)->dma_addr + (dma_addr_t)((unsigned long)(v)-(unsigned long)((lp)->dma)))
+
+static inline int init_rx_bufs(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	int i;
+	struct i596_rfd *rfd;
+	struct i596_rbd *rbd;
+
+	/* First build the Receive Buffer Descriptor List */
+
+	for (i = 0, rbd = dma->rbds; i < rx_ring_size; i++, rbd++) {
+		dma_addr_t dma_addr;
+		struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ + 4);
+
+		if (skb == NULL)
+			return -1;
+		skb_reserve(skb, 2);
+		dma_addr = dma_map_single(dev->dev.parent, skb->data,
+					  PKT_BUF_SZ, DMA_FROM_DEVICE);
+		rbd->v_next = rbd+1;
+		rbd->b_next = SWAP32(virt_to_dma(lp, rbd+1));
+		rbd->b_addr = SWAP32(virt_to_dma(lp, rbd));
+		rbd->skb = skb;
+		rbd->v_data = skb->data;
+		rbd->b_data = SWAP32(dma_addr);
+		rbd->size = SWAP16(PKT_BUF_SZ);
+	}
+	lp->rbd_head = dma->rbds;
+	rbd = dma->rbds + rx_ring_size - 1;
+	rbd->v_next = dma->rbds;
+	rbd->b_next = SWAP32(virt_to_dma(lp, dma->rbds));
+
+	/* Now build the Receive Frame Descriptor List */
+
+	for (i = 0, rfd = dma->rfds; i < rx_ring_size; i++, rfd++) {
+		rfd->rbd = I596_NULL;
+		rfd->v_next = rfd+1;
+		rfd->v_prev = rfd-1;
+		rfd->b_next = SWAP32(virt_to_dma(lp, rfd+1));
+		rfd->cmd = SWAP16(CMD_FLEX);
+	}
+	lp->rfd_head = dma->rfds;
+	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
+	rfd = dma->rfds;
+	rfd->rbd = SWAP32(virt_to_dma(lp, lp->rbd_head));
+	rfd->v_prev = dma->rfds + rx_ring_size - 1;
+	rfd = dma->rfds + rx_ring_size - 1;
+	rfd->v_next = dma->rfds;
+	rfd->b_next = SWAP32(virt_to_dma(lp, dma->rfds));
+	rfd->cmd = SWAP16(CMD_EOL|CMD_FLEX);
+
+	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
+	return 0;
+}
+
+static inline void remove_rx_bufs(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_rbd *rbd;
+	int i;
+
+	for (i = 0, rbd = lp->dma->rbds; i < rx_ring_size; i++, rbd++) {
+		if (rbd->skb == NULL)
+			break;
+		dma_unmap_single(dev->dev.parent,
+				 (dma_addr_t)SWAP32(rbd->b_data),
+				 PKT_BUF_SZ, DMA_FROM_DEVICE);
+		dev_kfree_skb(rbd->skb);
+	}
+}
+
+
+static void rebuild_rx_bufs(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	int i;
+
+	/* Ensure rx frame/buffer descriptors are tidy */
+
+	for (i = 0; i < rx_ring_size; i++) {
+		dma->rfds[i].rbd = I596_NULL;
+		dma->rfds[i].cmd = SWAP16(CMD_FLEX);
+	}
+	dma->rfds[rx_ring_size-1].cmd = SWAP16(CMD_EOL|CMD_FLEX);
+	lp->rfd_head = dma->rfds;
+	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
+	lp->rbd_head = dma->rbds;
+	dma->rfds[0].rbd = SWAP32(virt_to_dma(lp, dma->rbds));
+
+	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
+}
+
+
+static int init_i596_mem(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	unsigned long flags;
+
+	mpu_port(dev, PORT_RESET, 0);
+	udelay(100);			/* Wait 100us - seems to help */
+
+	/* change the scp address */
+
+	lp->last_cmd = jiffies;
+
+	dma->scp.sysbus = SYSBUS;
+	dma->scp.iscp = SWAP32(virt_to_dma(lp, &(dma->iscp)));
+	dma->iscp.scb = SWAP32(virt_to_dma(lp, &(dma->scb)));
+	dma->iscp.stat = SWAP32(ISCP_BUSY);
+	lp->cmd_backlog = 0;
+
+	lp->cmd_head = NULL;
+	dma->scb.cmd = I596_NULL;
+
+	DEB(DEB_INIT, printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
+
+	DMA_WBACK(dev, &(dma->scp), sizeof(struct i596_scp));
+	DMA_WBACK(dev, &(dma->iscp), sizeof(struct i596_iscp));
+	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
+
+	mpu_port(dev, PORT_ALTSCP, virt_to_dma(lp, &dma->scp));
+	ca(dev);
+	if (wait_istat(dev, dma, 1000, "initialization timed out"))
+		goto failed;
+	DEB(DEB_INIT, printk(KERN_DEBUG
+			     "%s: i82596 initialization successful\n",
+			     dev->name));
+
+	if (request_irq(dev->irq, &i596_interrupt, 0, "i82596", dev)) {
+		printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
+		goto failed;
+	}
+
+	/* Ensure rx frame/buffer descriptors are tidy */
+	rebuild_rx_bufs(dev);
+
+	dma->scb.command = 0;
+	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
+
+	DEB(DEB_INIT, printk(KERN_DEBUG
+			     "%s: queuing CmdConfigure\n", dev->name));
+	memcpy(dma->cf_cmd.i596_config, init_setup, 14);
+	dma->cf_cmd.cmd.command = SWAP16(CmdConfigure);
+	DMA_WBACK(dev, &(dma->cf_cmd), sizeof(struct cf_cmd));
+	i596_add_cmd(dev, &dma->cf_cmd.cmd);
+
+	DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
+	memcpy(dma->sa_cmd.eth_addr, dev->dev_addr, 6);
+	dma->sa_cmd.cmd.command = SWAP16(CmdSASetup);
+	DMA_WBACK(dev, &(dma->sa_cmd), sizeof(struct sa_cmd));
+	i596_add_cmd(dev, &dma->sa_cmd.cmd);
+
+	DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
+	dma->tdr_cmd.cmd.command = SWAP16(CmdTDR);
+	DMA_WBACK(dev, &(dma->tdr_cmd), sizeof(struct tdr_cmd));
+	i596_add_cmd(dev, &dma->tdr_cmd.cmd);
+
+	spin_lock_irqsave (&lp->lock, flags);
+
+	if (wait_cmd(dev, dma, 1000, "timed out waiting to issue RX_START")) {
+		spin_unlock_irqrestore (&lp->lock, flags);
+		goto failed_free_irq;
+	}
+	DEB(DEB_INIT, printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
+	dma->scb.command = SWAP16(RX_START);
+	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
+	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
+
+	ca(dev);
+
+	spin_unlock_irqrestore (&lp->lock, flags);
+	if (wait_cmd(dev, dma, 1000, "RX_START not processed"))
+		goto failed_free_irq;
+	DEB(DEB_INIT, printk(KERN_DEBUG
+			     "%s: Receive unit started OK\n", dev->name));
+	return 0;
+
+failed_free_irq:
+	free_irq(dev->irq, dev);
+failed:
+	printk(KERN_ERR "%s: Failed to initialise 82596\n", dev->name);
+	mpu_port(dev, PORT_RESET, 0);
+	return -1;
+}
+
+
+static inline int i596_rx(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_rfd *rfd;
+	struct i596_rbd *rbd;
+	int frames = 0;
+
+	DEB(DEB_RXFRAME, printk(KERN_DEBUG
+				"i596_rx(), rfd_head %p, rbd_head %p\n",
+				lp->rfd_head, lp->rbd_head));
+
+
+	rfd = lp->rfd_head;		/* Ref next frame to check */
+
+	DMA_INV(dev, rfd, sizeof(struct i596_rfd));
+	while (rfd->stat & SWAP16(STAT_C)) {	/* Loop while complete frames */
+		if (rfd->rbd == I596_NULL)
+			rbd = NULL;
+		else if (rfd->rbd == lp->rbd_head->b_addr) {
+			rbd = lp->rbd_head;
+			DMA_INV(dev, rbd, sizeof(struct i596_rbd));
+		} else {
+			printk(KERN_ERR "%s: rbd chain broken!\n", dev->name);
+			/* XXX Now what? */
+			rbd = NULL;
+		}
+		DEB(DEB_RXFRAME, printk(KERN_DEBUG
+				      "  rfd %p, rfd.rbd %08x, rfd.stat %04x\n",
+				      rfd, rfd->rbd, rfd->stat));
+
+		if (rbd != NULL && (rfd->stat & SWAP16(STAT_OK))) {
+			/* a good frame */
+			int pkt_len = SWAP16(rbd->count) & 0x3fff;
+			struct sk_buff *skb = rbd->skb;
+			int rx_in_place = 0;
+
+			DEB(DEB_RXADDR, print_eth(rbd->v_data, "received"));
+			frames++;
+
+			/* Check if the packet is long enough to just accept
+			 * without copying to a properly sized skbuff.
+			 */
+
+			if (pkt_len > rx_copybreak) {
+				struct sk_buff *newskb;
+				dma_addr_t dma_addr;
+
+				dma_unmap_single(dev->dev.parent,
+						 (dma_addr_t)SWAP32(rbd->b_data),
+						 PKT_BUF_SZ, DMA_FROM_DEVICE);
+				/* Get fresh skbuff to replace filled one. */
+				newskb = netdev_alloc_skb(dev, PKT_BUF_SZ + 4);
+				if (newskb == NULL) {
+					skb = NULL;	/* drop pkt */
+					goto memory_squeeze;
+				}
+				skb_reserve(newskb, 2);
+
+				/* Pass up the skb already on the Rx ring. */
+				skb_put(skb, pkt_len);
+				rx_in_place = 1;
+				rbd->skb = newskb;
+				dma_addr = dma_map_single(dev->dev.parent,
+							  newskb->data,
+							  PKT_BUF_SZ,
+							  DMA_FROM_DEVICE);
+				rbd->v_data = newskb->data;
+				rbd->b_data = SWAP32(dma_addr);
+				DMA_WBACK_INV(dev, rbd, sizeof(struct i596_rbd));
+			} else
+				skb = netdev_alloc_skb(dev, pkt_len + 2);
+memory_squeeze:
+			if (skb == NULL) {
+				/* XXX tulip.c can defer packets here!! */
+				printk(KERN_ERR
+				       "%s: i596_rx Memory squeeze, dropping packet.\n",
+				       dev->name);
+				lp->stats.rx_dropped++;
+			} else {
+				if (!rx_in_place) {
+					/* 16 byte align the data fields */
+					dma_sync_single_for_cpu(dev->dev.parent,
+								(dma_addr_t)SWAP32(rbd->b_data),
+								PKT_BUF_SZ, DMA_FROM_DEVICE);
+					skb_reserve(skb, 2);
+					memcpy(skb_put(skb, pkt_len), rbd->v_data, pkt_len);
+					dma_sync_single_for_device(dev->dev.parent,
+								   (dma_addr_t)SWAP32(rbd->b_data),
+								   PKT_BUF_SZ, DMA_FROM_DEVICE);
+				}
+				skb->len = pkt_len;
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->last_rx = jiffies;
+				lp->stats.rx_packets++;
+				lp->stats.rx_bytes += pkt_len;
+			}
+		} else {
+			DEB(DEB_ERRORS, printk(KERN_DEBUG
+					       "%s: Error, rfd.stat = 0x%04x\n",
+					       dev->name, rfd->stat));
+			lp->stats.rx_errors++;
+			if (rfd->stat & SWAP16(0x0100))
+				lp->stats.collisions++;
+			if (rfd->stat & SWAP16(0x8000))
+				lp->stats.rx_length_errors++;
+			if (rfd->stat & SWAP16(0x0001))
+				lp->stats.rx_over_errors++;
+			if (rfd->stat & SWAP16(0x0002))
+				lp->stats.rx_fifo_errors++;
+			if (rfd->stat & SWAP16(0x0004))
+				lp->stats.rx_frame_errors++;
+			if (rfd->stat & SWAP16(0x0008))
+				lp->stats.rx_crc_errors++;
+			if (rfd->stat & SWAP16(0x0010))
+				lp->stats.rx_length_errors++;
+		}
+
+		/* Clear the buffer descriptor count and EOF + F flags */
+
+		if (rbd != NULL && (rbd->count & SWAP16(0x4000))) {
+			rbd->count = 0;
+			lp->rbd_head = rbd->v_next;
+			DMA_WBACK_INV(dev, rbd, sizeof(struct i596_rbd));
+		}
+
+		/* Tidy the frame descriptor, marking it as end of list */
+
+		rfd->rbd = I596_NULL;
+		rfd->stat = 0;
+		rfd->cmd = SWAP16(CMD_EOL|CMD_FLEX);
+		rfd->count = 0;
+
+		/* Update record of next frame descriptor to process */
+
+		lp->dma->scb.rfd = rfd->b_next;
+		lp->rfd_head = rfd->v_next;
+		DMA_WBACK_INV(dev, rfd, sizeof(struct i596_rfd));
+
+		/* Remove end-of-list from old end descriptor */
+
+		rfd->v_prev->cmd = SWAP16(CMD_FLEX);
+		DMA_WBACK_INV(dev, rfd->v_prev, sizeof(struct i596_rfd));
+		rfd = lp->rfd_head;
+		DMA_INV(dev, rfd, sizeof(struct i596_rfd));
+	}
+
+	DEB(DEB_RXFRAME, printk(KERN_DEBUG "frames %d\n", frames));
+
+	return 0;
+}
+
+
+static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
+{
+	struct i596_cmd *ptr;
+
+	while (lp->cmd_head != NULL) {
+		ptr = lp->cmd_head;
+		lp->cmd_head = ptr->v_next;
+		lp->cmd_backlog--;
+
+		switch (SWAP16(ptr->command) & 0x7) {
+		case CmdTx:
+			{
+				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
+				struct sk_buff *skb = tx_cmd->skb;
+				dma_unmap_single(dev->dev.parent,
+						 tx_cmd->dma_addr,
+						 skb->len, DMA_TO_DEVICE);
+
+				dev_kfree_skb(skb);
+
+				lp->stats.tx_errors++;
+				lp->stats.tx_aborted_errors++;
+
+				ptr->v_next = NULL;
+				ptr->b_next = I596_NULL;
+				tx_cmd->cmd.command = 0;  /* Mark as free */
+				break;
+			}
+		default:
+			ptr->v_next = NULL;
+			ptr->b_next = I596_NULL;
+		}
+		DMA_WBACK_INV(dev, ptr, sizeof(struct i596_cmd));
+	}
+
+	wait_cmd(dev, lp->dma, 100, "i596_cleanup_cmd timed out");
+	lp->dma->scb.cmd = I596_NULL;
+	DMA_WBACK(dev, &(lp->dma->scb), sizeof(struct i596_scb));
+}
+
+
+static inline void i596_reset(struct net_device *dev, struct i596_private *lp)
+{
+	unsigned long flags;
+
+	DEB(DEB_RESET, printk(KERN_DEBUG "i596_reset\n"));
+
+	spin_lock_irqsave (&lp->lock, flags);
+
+	wait_cmd(dev, lp->dma, 100, "i596_reset timed out");
+
+	netif_stop_queue(dev);
+
+	/* FIXME: this command might cause an lpmc */
+	lp->dma->scb.command = SWAP16(CUC_ABORT | RX_ABORT);
+	DMA_WBACK(dev, &(lp->dma->scb), sizeof(struct i596_scb));
+	ca(dev);
+
+	/* wait for shutdown */
+	wait_cmd(dev, lp->dma, 1000, "i596_reset 2 timed out");
+	spin_unlock_irqrestore (&lp->lock, flags);
+
+	i596_cleanup_cmd(dev, lp);
+	i596_rx(dev);
+
+	netif_start_queue(dev);
+	init_i596_mem(dev);
+}
+
+
+static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	unsigned long flags;
+
+	DEB(DEB_ADDCMD, printk(KERN_DEBUG "i596_add_cmd cmd_head %p\n",
+			       lp->cmd_head));
+
+	cmd->status = 0;
+	cmd->command |= SWAP16(CMD_EOL | CMD_INTR);
+	cmd->v_next = NULL;
+	cmd->b_next = I596_NULL;
+	DMA_WBACK(dev, cmd, sizeof(struct i596_cmd));
+
+	spin_lock_irqsave (&lp->lock, flags);
+
+	if (lp->cmd_head != NULL) {
+		lp->cmd_tail->v_next = cmd;
+		lp->cmd_tail->b_next = SWAP32(virt_to_dma(lp, &cmd->status));
+		DMA_WBACK(dev, lp->cmd_tail, sizeof(struct i596_cmd));
+	} else {
+		lp->cmd_head = cmd;
+		wait_cmd(dev, dma, 100, "i596_add_cmd timed out");
+		dma->scb.cmd = SWAP32(virt_to_dma(lp, &cmd->status));
+		dma->scb.command = SWAP16(CUC_START);
+		DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
+		ca(dev);
+	}
+	lp->cmd_tail = cmd;
+	lp->cmd_backlog++;
+
+	spin_unlock_irqrestore (&lp->lock, flags);
+
+	if (lp->cmd_backlog > max_cmd_backlog) {
+		unsigned long tickssofar = jiffies - lp->last_cmd;
+
+		if (tickssofar < ticks_limit)
+			return;
+
+		printk(KERN_ERR
+		       "%s: command unit timed out, status resetting.\n",
+		       dev->name);
+#if 1
+		i596_reset(dev, lp);
+#endif
+	}
+}
+
+static int i596_open(struct net_device *dev)
+{
+	DEB(DEB_OPEN, printk(KERN_DEBUG
+			     "%s: i596_open() irq %d.\n", dev->name, dev->irq));
+
+	if (init_rx_bufs(dev)) {
+		printk(KERN_ERR "%s: Failed to init rx bufs\n", dev->name);
+		return -EAGAIN;
+	}
+	if (init_i596_mem(dev)) {
+		printk(KERN_ERR "%s: Failed to init memory\n", dev->name);
+		goto out_remove_rx_bufs;
+	}
+	netif_start_queue(dev);
+
+	return 0;
+
+out_remove_rx_bufs:
+	remove_rx_bufs(dev);
+	return -EAGAIN;
+}
+
+static void i596_tx_timeout (struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+
+	/* Transmitter timeout, serious problems. */
+	DEB(DEB_ERRORS, printk(KERN_DEBUG
+			       "%s: transmit timed out, status resetting.\n",
+			       dev->name));
+
+	lp->stats.tx_errors++;
+
+	/* Try to restart the adaptor */
+	if (lp->last_restart == lp->stats.tx_packets) {
+		DEB(DEB_ERRORS, printk(KERN_DEBUG "Resetting board.\n"));
+		/* Shutdown and restart */
+		i596_reset (dev, lp);
+	} else {
+		/* Issue a channel attention signal */
+		DEB(DEB_ERRORS, printk(KERN_DEBUG "Kicking board.\n"));
+		lp->dma->scb.command = SWAP16(CUC_START | RX_START);
+		DMA_WBACK_INV(dev, &(lp->dma->scb), sizeof(struct i596_scb));
+		ca (dev);
+		lp->last_restart = lp->stats.tx_packets;
+	}
+
+	dev->trans_start = jiffies;
+	netif_wake_queue (dev);
+}
+
+
+static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct tx_cmd *tx_cmd;
+	struct i596_tbd *tbd;
+	short length = skb->len;
+	dev->trans_start = jiffies;
+
+	DEB(DEB_STARTTX, printk(KERN_DEBUG
+				"%s: i596_start_xmit(%x,%p) called\n",
+				dev->name, skb->len, skb->data));
+
+	if (length < ETH_ZLEN) {
+		if (skb_padto(skb, ETH_ZLEN))
+			return 0;
+		length = ETH_ZLEN;
+	}
+
+	netif_stop_queue(dev);
+
+	tx_cmd = lp->dma->tx_cmds + lp->next_tx_cmd;
+	tbd = lp->dma->tbds + lp->next_tx_cmd;
+
+	if (tx_cmd->cmd.command) {
+		DEB(DEB_ERRORS, printk(KERN_DEBUG
+				       "%s: xmit ring full, dropping packet.\n",
+				       dev->name));
+		lp->stats.tx_dropped++;
+
+		dev_kfree_skb(skb);
+	} else {
+		if (++lp->next_tx_cmd == TX_RING_SIZE)
+			lp->next_tx_cmd = 0;
+		tx_cmd->tbd = SWAP32(virt_to_dma(lp, tbd));
+		tbd->next = I596_NULL;
+
+		tx_cmd->cmd.command = SWAP16(CMD_FLEX | CmdTx);
+		tx_cmd->skb = skb;
+
+		tx_cmd->pad = 0;
+		tx_cmd->size = 0;
+		tbd->pad = 0;
+		tbd->size = SWAP16(EOF | length);
+
+		tx_cmd->dma_addr = dma_map_single(dev->dev.parent, skb->data,
+						  skb->len, DMA_TO_DEVICE);
+		tbd->data = SWAP32(tx_cmd->dma_addr);
+
+		DEB(DEB_TXADDR, print_eth(skb->data, "tx-queued"));
+		DMA_WBACK_INV(dev, tx_cmd, sizeof(struct tx_cmd));
+		DMA_WBACK_INV(dev, tbd, sizeof(struct i596_tbd));
+		i596_add_cmd(dev, &tx_cmd->cmd);
+
+		lp->stats.tx_packets++;
+		lp->stats.tx_bytes += length;
+	}
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static void print_eth(unsigned char *add, char *str)
+{
+	int i;
+
+	printk(KERN_DEBUG "i596 0x%p, ", add);
+	for (i = 0; i < 6; i++)
+		printk(" %02X", add[i + 6]);
+	printk(" -->");
+	for (i = 0; i < 6; i++)
+		printk(" %02X", add[i]);
+	printk(" %02X%02X, %s\n", add[12], add[13], str);
+}
+
+static int __devinit i82596_probe(struct net_device *dev)
+{
+	int i;
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma;
+
+	/* This lot is ensure things have been cache line aligned. */
+	BUILD_BUG_ON(sizeof(struct i596_rfd) != 32);
+	BUILD_BUG_ON(sizeof(struct i596_rbd) &  31);
+	BUILD_BUG_ON(sizeof(struct tx_cmd)   &  31);
+	BUILD_BUG_ON(sizeof(struct i596_tbd) != 32);
+#ifndef __LP64__
+	BUILD_BUG_ON(sizeof(struct i596_dma) > 4096);
+#endif
+
+	if (!dev->base_addr || !dev->irq)
+		return -ENODEV;
+
+	dma = (struct i596_dma *) DMA_ALLOC(dev->dev.parent,
+		sizeof(struct i596_dma), &lp->dma_addr, GFP_KERNEL);
+	if (!dma) {
+		printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__);
+		return -ENOMEM;
+	}
+
+	/* The 82596-specific entries in the device structure. */
+	dev->open = i596_open;
+	dev->stop = i596_close;
+	dev->hard_start_xmit = i596_start_xmit;
+	dev->get_stats = i596_get_stats;
+	dev->set_multicast_list = set_multicast_list;
+	dev->tx_timeout = i596_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = i596_poll_controller;
+#endif
+
+	memset(dma, 0, sizeof(struct i596_dma));
+	lp->dma = dma;
+
+	dma->scb.command = 0;
+	dma->scb.cmd = I596_NULL;
+	dma->scb.rfd = I596_NULL;
+	spin_lock_init(&lp->lock);
+
+	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
+
+	i = register_netdev(dev);
+	if (i) {
+		DMA_FREE(dev->dev.parent, sizeof(struct i596_dma),
+				    (void *)dma, lp->dma_addr);
+		return i;
+	};
+
+	DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx,",
+			      dev->name, dev->base_addr));
+	for (i = 0; i < 6; i++)
+		DEB(DEB_PROBE, printk(" %2.2X", dev->dev_addr[i]));
+	DEB(DEB_PROBE, printk(" IRQ %d.\n", dev->irq));
+	DEB(DEB_INIT, printk(KERN_INFO
+			     "%s: dma at 0x%p (%d bytes), lp->scb at 0x%p\n",
+			     dev->name, dma, (int)sizeof(struct i596_dma),
+			     &dma->scb));
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void i596_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	i596_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+static irqreturn_t i596_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct i596_private *lp;
+	struct i596_dma *dma;
+	unsigned short status, ack_cmd = 0;
+
+	if (dev == NULL) {
+		printk(KERN_WARNING "%s: irq %d for unknown device.\n",
+		       __FUNCTION__, irq);
+		return IRQ_NONE;
+	}
+
+	lp = netdev_priv(dev);
+	dma = lp->dma;
+
+	spin_lock (&lp->lock);
+
+	wait_cmd(dev, dma, 100, "i596 interrupt, timeout");
+	status = SWAP16(dma->scb.status);
+
+	DEB(DEB_INTS, printk(KERN_DEBUG
+			     "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
+			dev->name, irq, status));
+
+	ack_cmd = status & 0xf000;
+
+	if (!ack_cmd) {
+		DEB(DEB_ERRORS, printk(KERN_DEBUG
+				       "%s: interrupt with no events\n",
+				       dev->name));
+		spin_unlock (&lp->lock);
+		return IRQ_NONE;
+	}
+
+	if ((status & 0x8000) || (status & 0x2000)) {
+		struct i596_cmd *ptr;
+
+		if ((status & 0x8000))
+			DEB(DEB_INTS,
+			    printk(KERN_DEBUG
+				   "%s: i596 interrupt completed command.\n",
+				   dev->name));
+		if ((status & 0x2000))
+			DEB(DEB_INTS,
+			    printk(KERN_DEBUG
+				   "%s: i596 interrupt command unit inactive %x.\n",
+				   dev->name, status & 0x0700));
+
+		while (lp->cmd_head != NULL) {
+			DMA_INV(dev, lp->cmd_head, sizeof(struct i596_cmd));
+			if (!(lp->cmd_head->status & SWAP16(STAT_C)))
+				break;
+
+			ptr = lp->cmd_head;
+
+			DEB(DEB_STATUS,
+			    printk(KERN_DEBUG
+				   "cmd_head->status = %04x, ->command = %04x\n",
+				   SWAP16(lp->cmd_head->status),
+				   SWAP16(lp->cmd_head->command)));
+			lp->cmd_head = ptr->v_next;
+			lp->cmd_backlog--;
+
+			switch (SWAP16(ptr->command) & 0x7) {
+			case CmdTx:
+			    {
+				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
+				struct sk_buff *skb = tx_cmd->skb;
+
+				if (ptr->status & SWAP16(STAT_OK)) {
+					DEB(DEB_TXADDR,
+					    print_eth(skb->data, "tx-done"));
+				} else {
+					lp->stats.tx_errors++;
+					if (ptr->status & SWAP16(0x0020))
+						lp->stats.collisions++;
+					if (!(ptr->status & SWAP16(0x0040)))
+						lp->stats.tx_heartbeat_errors++;
+					if (ptr->status & SWAP16(0x0400))
+						lp->stats.tx_carrier_errors++;
+					if (ptr->status & SWAP16(0x0800))
+						lp->stats.collisions++;
+					if (ptr->status & SWAP16(0x1000))
+						lp->stats.tx_aborted_errors++;
+				}
+				dma_unmap_single(dev->dev.parent,
+						 tx_cmd->dma_addr,
+						 skb->len, DMA_TO_DEVICE);
+				dev_kfree_skb_irq(skb);
+
+				tx_cmd->cmd.command = 0; /* Mark free */
+				break;
+			    }
+			case CmdTDR:
+			    {
+				unsigned short status = SWAP16(((struct tdr_cmd *)ptr)->status);
+
+				if (status & 0x8000) {
+					DEB(DEB_ANY,
+					    printk(KERN_DEBUG "%s: link ok.\n",
+						   dev->name));
+				} else {
+					if (status & 0x4000)
+						printk(KERN_ERR
+						       "%s: Transceiver problem.\n",
+						       dev->name);
+					if (status & 0x2000)
+						printk(KERN_ERR
+						       "%s: Termination problem.\n",
+						       dev->name);
+					if (status & 0x1000)
+						printk(KERN_ERR
+						       "%s: Short circuit.\n",
+						       dev->name);
+
+					DEB(DEB_TDR,
+					    printk(KERN_DEBUG "%s: Time %d.\n",
+						   dev->name, status & 0x07ff));
+				}
+				break;
+			    }
+			case CmdConfigure:
+				/*
+				 * Zap command so set_multicast_list() know
+				 * it is free
+				 */
+				ptr->command = 0;
+				break;
+			}
+			ptr->v_next = NULL;
+			ptr->b_next = I596_NULL;
+			DMA_WBACK(dev, ptr, sizeof(struct i596_cmd));
+			lp->last_cmd = jiffies;
+		}
+
+		/* This mess is arranging that only the last of any outstanding
+		 * commands has the interrupt bit set.  Should probably really
+		 * only add to the cmd queue when the CU is stopped.
+		 */
+		ptr = lp->cmd_head;
+		while ((ptr != NULL) && (ptr != lp->cmd_tail)) {
+			struct i596_cmd *prev = ptr;
+
+			ptr->command &= SWAP16(0x1fff);
+			ptr = ptr->v_next;
+			DMA_WBACK_INV(dev, prev, sizeof(struct i596_cmd));
+		}
+
+		if (lp->cmd_head != NULL)
+			ack_cmd |= CUC_START;
+		dma->scb.cmd = SWAP32(virt_to_dma(lp, &lp->cmd_head->status));
+		DMA_WBACK_INV(dev, &dma->scb, sizeof(struct i596_scb));
+	}
+	if ((status & 0x1000) || (status & 0x4000)) {
+		if ((status & 0x4000))
+			DEB(DEB_INTS,
+			    printk(KERN_DEBUG
+				   "%s: i596 interrupt received a frame.\n",
+				   dev->name));
+		i596_rx(dev);
+		/* Only RX_START if stopped - RGH 07-07-96 */
+		if (status & 0x1000) {
+			if (netif_running(dev)) {
+				DEB(DEB_ERRORS,
+				    printk(KERN_DEBUG
+					   "%s: i596 interrupt receive unit inactive, status 0x%x\n",
+					   dev->name, status));
+				ack_cmd |= RX_START;
+				lp->stats.rx_errors++;
+				lp->stats.rx_fifo_errors++;
+				rebuild_rx_bufs(dev);
+			}
+		}
+	}
+	wait_cmd(dev, dma, 100, "i596 interrupt, timeout");
+	dma->scb.command = SWAP16(ack_cmd);
+	DMA_WBACK(dev, &dma->scb, sizeof(struct i596_scb));
+
+	/* DANGER: I suspect that some kind of interrupt
+	 acknowledgement aside from acking the 82596 might be needed
+	 here...  but it's running acceptably without */
+
+	ca(dev);
+
+	wait_cmd(dev, dma, 100, "i596 interrupt, exit timeout");
+	DEB(DEB_INTS, printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
+
+	spin_unlock (&lp->lock);
+	return IRQ_HANDLED;
+}
+
+static int i596_close(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	netif_stop_queue(dev);
+
+	DEB(DEB_INIT,
+	    printk(KERN_DEBUG
+		   "%s: Shutting down ethercard, status was %4.4x.\n",
+		   dev->name, SWAP16(lp->dma->scb.status)));
+
+	spin_lock_irqsave(&lp->lock, flags);
+
+	wait_cmd(dev, lp->dma, 100, "close1 timed out");
+	lp->dma->scb.command = SWAP16(CUC_ABORT | RX_ABORT);
+	DMA_WBACK(dev, &lp->dma->scb, sizeof(struct i596_scb));
+
+	ca(dev);
+
+	wait_cmd(dev, lp->dma, 100, "close2 timed out");
+	spin_unlock_irqrestore(&lp->lock, flags);
+	DEB(DEB_STRUCT, i596_display_data(dev));
+	i596_cleanup_cmd(dev, lp);
+
+	free_irq(dev->irq, dev);
+	remove_rx_bufs(dev);
+
+	return 0;
+}
+
+static struct net_device_stats *i596_get_stats(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+
+	return &lp->stats;
+}
+
+/*
+ *    Set or clear the multicast filter for this adaptor.
+ */
+
+static void set_multicast_list(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	int config = 0, cnt;
+
+	DEB(DEB_MULTI,
+	    printk(KERN_DEBUG
+		   "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
+		   dev->name, dev->mc_count,
+		   dev->flags & IFF_PROMISC ? "ON" : "OFF",
+		   dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
+
+	if ((dev->flags & IFF_PROMISC) &&
+	    !(dma->cf_cmd.i596_config[8] & 0x01)) {
+		dma->cf_cmd.i596_config[8] |= 0x01;
+		config = 1;
+	}
+	if (!(dev->flags & IFF_PROMISC) &&
+	    (dma->cf_cmd.i596_config[8] & 0x01)) {
+		dma->cf_cmd.i596_config[8] &= ~0x01;
+		config = 1;
+	}
+	if ((dev->flags & IFF_ALLMULTI) &&
+	    (dma->cf_cmd.i596_config[11] & 0x20)) {
+		dma->cf_cmd.i596_config[11] &= ~0x20;
+		config = 1;
+	}
+	if (!(dev->flags & IFF_ALLMULTI) &&
+	    !(dma->cf_cmd.i596_config[11] & 0x20)) {
+		dma->cf_cmd.i596_config[11] |= 0x20;
+		config = 1;
+	}
+	if (config) {
+		if (dma->cf_cmd.cmd.command)
+			printk(KERN_INFO
+			       "%s: config change request already queued\n",
+			       dev->name);
+		else {
+			dma->cf_cmd.cmd.command = SWAP16(CmdConfigure);
+			DMA_WBACK_INV(dev, &dma->cf_cmd, sizeof(struct cf_cmd));
+			i596_add_cmd(dev, &dma->cf_cmd.cmd);
+		}
+	}
+
+	cnt = dev->mc_count;
+	if (cnt > MAX_MC_CNT) {
+		cnt = MAX_MC_CNT;
+		printk(KERN_NOTICE "%s: Only %d multicast addresses supported",
+			dev->name, cnt);
+	}
+
+	if (dev->mc_count > 0) {
+		struct dev_mc_list *dmi;
+		unsigned char *cp;
+		struct mc_cmd *cmd;
+
+		cmd = &dma->mc_cmd;
+		cmd->cmd.command = SWAP16(CmdMulticastList);
+		cmd->mc_cnt = SWAP16(dev->mc_count * 6);
+		cp = cmd->mc_addrs;
+		for (dmi = dev->mc_list;
+		     cnt && dmi != NULL;
+		     dmi = dmi->next, cnt--, cp += 6) {
+			memcpy(cp, dmi->dmi_addr, 6);
+			if (i596_debug > 1)
+				DEB(DEB_MULTI,
+				    printk(KERN_DEBUG
+					   "%s: Adding address %02x:%02x:%02x:%02x:%02x:%02x\n",
+					   dev->name, cp[0], cp[1], cp[2], cp[3], cp[4], cp[5]));
+		}
+		DMA_WBACK_INV(dev, &dma->mc_cmd, sizeof(struct mc_cmd));
+		i596_add_cmd(dev, &cmd->cmd);
+	}
+}