sh: Switch SH-5 to use CONFIG_PAGE_OFFSET.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

5 files changed, 20 insertions, 19 deletions

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 15161f1851a..e08d4d27d8d 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -85,7 +85,7 @@ KBUILD_IMAGE		:= arch/sh/boot/zImage
 ifdef CONFIG_SUPERH32
 LDFLAGS_vmlinux	+= -e _stext
 else
-LDFLAGS_vmlinux	+= --defsym phys_stext=_stext-$(CONFIG_CACHED_MEMORY_OFFSET) \
+LDFLAGS_vmlinux	+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
 		   --defsym phys_stext_shmedia=phys_stext+1 \
 		   -e phys_stext_shmedia
 endif
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 81010b9308b..0f65bb4372d 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -432,7 +432,7 @@ reset_or_panic:
 	synco	/* TAKum03020 (but probably a good idea anyway.) */
 	putcon	SP, DCR
 	/* First save r0-1 and tr0, as we need to use these */
-	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
 	st.q	SP, 0, r0
 	st.q	SP, 8, r1
 	gettr	tr0, r0
@@ -442,7 +442,7 @@ reset_or_panic:
 	getcon	EXPEVT, r0
 	movi	RESET_CAUSE, r1
 	sub	r1, r0, r1		/* r1=0 if reset */
-	movi	_stext-CONFIG_CACHED_MEMORY_OFFSET, r0
+	movi	_stext-CONFIG_PAGE_OFFSET, r0
 	ori	r0, 1, r0
 	ptabs	r0, tr0
 	beqi	r1, 0, tr0		/* Jump to start address if reset */
@@ -454,7 +454,7 @@ reset_or_panic:
 	beqi	r1, 0, tr0		/* jump if single step */
 
 	/* Now jump to where we save the registers. */
-	movi	panic_stash_regs-CONFIG_CACHED_MEMORY_OFFSET, r1
+	movi	panic_stash_regs-CONFIG_PAGE_OFFSET, r1
 	ptabs	r1, tr0
 	blink	tr0, r63
 
@@ -490,7 +490,7 @@ debug_exception:
 	 */
 	putcon	SP, DCR
 	/* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */
-	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
 
 	/* With the MMU off, we are bypassing the cache, so purge any
          * data that will be made stale by the following stores.
@@ -558,7 +558,7 @@ debug_interrupt:
 	/* Save original stack pointer into KCR1 */
 	synco
 	putcon	SP, KCR1
-	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
 	ocbp	SP, 0
 	ocbp	SP, 32
 	synco
@@ -607,7 +607,7 @@ debug_interrupt:
 	movi	EVENT_FAULT_NOT_TLB, r4
 
 	or	SP, ZERO, r5
-	movi	CONFIG_CACHED_MEMORY_OFFSET, r6
+	movi	CONFIG_PAGE_OFFSET, r6
 	add	r6, r5, r5
 	getcon	KCR1, SP
 
@@ -1366,7 +1366,7 @@ route_to_panic_handler:
 	   last-chance debugging, e.g. if no output wants to go to the console.
 	   */
 
-	movi	panic_handler - CONFIG_CACHED_MEMORY_OFFSET, r1
+	movi	panic_handler - CONFIG_PAGE_OFFSET, r1
 	ptabs	r1, tr0
 	pta	1f, tr1
 	gettr	tr1, r0
@@ -1408,7 +1408,7 @@ peek_real_address_q:
 	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
 
 	putcon	r1, ssr
-	movi	.peek0 - CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */
+	movi	.peek0 - CONFIG_PAGE_OFFSET, r36 /* real mode target address */
 	movi	1f, r37		/* virtual mode return addr */
 	putcon	r36, spc
 
@@ -1457,7 +1457,7 @@ poke_real_address_q:
 	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
 
 	putcon	r1, ssr
-	movi	.poke0-CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */
+	movi	.poke0-CONFIG_PAGE_OFFSET, r36 /* real mode target address */
 	movi	1f, r37		/* virtual mode return addr */
 	putcon	r36, spc
 
@@ -1954,7 +1954,7 @@ panic_stash_regs:
 	getcon	SSR,r3
 	getcon	EXPEVT,r4
 	/* Prepare to jump to C - physical address */
-	movi	panic_handler-CONFIG_CACHED_MEMORY_OFFSET, r1
+	movi	panic_handler-CONFIG_PAGE_OFFSET, r1
 	ori	r1, 1, r1
 	ptabs   r1, tr0
 	getcon	DCR, SP
@@ -2055,7 +2055,7 @@ trap_init:
 	andi	r19, -4, r19			/* reset MMUOFF + reserved */
 	/* For RESVEC exceptions we force the MMU off, which means we need the
 	   physical address. */
-	movi	LRESVEC_block-CONFIG_CACHED_MEMORY_OFFSET, r20
+	movi	LRESVEC_block-CONFIG_PAGE_OFFSET, r20
 	andi	r20, -4, r20			/* reset reserved */
 	ori	r20, 1, r20			/* set MMUOFF */
 	putcon	r19, VBR
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index 55ae281893f..c969db592be 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -38,9 +38,9 @@
 #define MMUDR_END	DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP
 #define MMUDR_STEP	TLB_STEP
 
-/* Safety check : CONFIG_CACHED_MEMORY_OFFSET has to be a multiple of 512Mb */
-#if (CONFIG_CACHED_MEMORY_OFFSET & ((1UL<<29)-1))
-#error "CONFIG_CACHED_MEMORY_OFFSET must be a multiple of 512Mb"
+/* Safety check : CONFIG_PAGE_OFFSET has to be a multiple of 512Mb */
+#if (CONFIG_PAGE_OFFSET & ((1UL<<29)-1))
+#error "CONFIG_PAGE_OFFSET must be a multiple of 512Mb"
 #endif
 
 /*
@@ -49,7 +49,7 @@
 /* Deal safely with the case where the base of RAM is not 512Mb aligned */
 
 #define ALIGN_512M_MASK (0xffffffffe0000000)
-#define ALIGNED_EFFECTIVE ((CONFIG_CACHED_MEMORY_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK)
+#define ALIGNED_EFFECTIVE ((CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK)
 #define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK)
 
 #define MMUIR_TEXT_H	(0x0000000000000003 | ALIGNED_EFFECTIVE)
diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S
index f0f5771657d..2fd0f740148 100644
--- a/arch/sh/kernel/vmlinux_64.lds.S
+++ b/arch/sh/kernel/vmlinux_64.lds.S
@@ -24,7 +24,7 @@
 #include <asm/cache.h>
 #include <asm/thread_info.h>
 
-#define LOAD_OFFSET	CONFIG_CACHED_MEMORY_OFFSET
+#define LOAD_OFFSET	CONFIG_PAGE_OFFSET
 #include <asm-generic/vmlinux.lds.h>
 
 OUTPUT_ARCH(sh:sh5)
@@ -34,7 +34,7 @@ OUTPUT_ARCH(sh:sh5)
 ENTRY(__start)
 SECTIONS
 {
-	. = CONFIG_CACHED_MEMORY_OFFSET + CONFIG_MEMORY_START + PAGE_SIZE;
+	. = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + PAGE_SIZE;
 	_text = .;			/* Text and read-only data */
 
 	.empty_zero_page : C_PHYS(.empty_zero_page) {
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 7ff26c1f4e9..2af950784e6 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -17,7 +17,8 @@ config MMU
 
 config PAGE_OFFSET
 	hex
-	default "0x80000000" if MMU
+	default "0x80000000" if MMU && SUPERH32
+	default "0x20000000" if MMU && SUPERH64
 	default "0x00000000"
 
 config MEMORY_START