Merge master.kernel.org:/home/rmk/linux-2.6-arm

7 files changed, 147 insertions, 28 deletions

diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
new file mode 100644
index 00000000000..b93b68e2b14
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -0,0 +1,93 @@
+			S3C24XX USB Host support
+			========================
+
+
+
+Introduction
+------------
+
+  This document details the S3C2410/S3C2440 in-built OHCI USB host support.
+
+Configuration
+-------------
+
+  Enable at least the following kernel options:
+
+  menuconfig:
+
+   Device Drivers  --->
+     USB support  --->
+       <*> Support for Host-side USB
+       <*>   OHCI HCD support
+
+
+  .config:
+    CONFIG_USB
+    CONFIG_USB_OHCI_HCD
+
+
+  Once these options are configured, the standard set of USB device
+  drivers can be configured and used.
+
+
+Board Support
+-------------
+
+  The driver attaches to a platform device, which will need to be
+  added by the board specific support file in linux/arch/arm/mach-s3c2410,
+  such as mach-bast.c or mach-smdk2410.c
+
+  The platform device's platform_data field is only needed if the
+  board implements extra power control or over-current monitoring.
+
+  The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
+  register, so if both ports are to be used for the host, then it is
+  the board support file's responsibility to ensure that the second
+  port is configured to be connected to the OHCI core.
+
+
+Platform Data
+-------------
+
+  See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+  descriptions of the platform device data. An implementation
+  can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
+
+  The `struct s3c2410_hcd_info` contains a pair of functions
+  that get called to enable over-current detection, and to
+  control the port power status.
+
+  The ports are numbered 0 and 1.
+
+  power_control:
+
+    Called to enable or disable the power on the port.
+
+  enable_oc:
+
+    Called to enable or disable the over-current monitoring.
+    This should claim or release the resources being used to
+    check the power condition on the port, such as an IRQ.
+
+  report_oc:
+
+    The OHCI driver fills this field in for the over-current code
+    to call when there is a change to the over-current state on
+    an port. The ports argument is a bitmask of 1 bit per port,
+    with bit X being 1 for an over-current on port X.
+
+    The function s3c2410_usb_report_oc() has been provided to
+    ensure this is called correctly.
+
+  port[x]:
+
+    This is struct describes each port, 0 or 1. The platform driver
+    should set the flags field of each port to S3C_HCDFLG_USED if
+    the port is enabled.
+
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2005 Simtec Electronics
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 7f2b6136297..f021fd82be5 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2004,2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -14,6 +14,8 @@
  * Modifications:
  *	14-Sep-2004 BJD  Created
  *	18-Oct-2004 BJD  Cleanups, and added code to report OC cleared
+ *	09-Aug-2005 BJD  Renamed s3c2410_report_oc to s3c2410_usb_report_oc
+ *	09-Aug-2005 BJD  Ports powered only if both are enabled
 */
 
 #define DEBUG
@@ -47,13 +49,19 @@
  * designed boards.
 */
 
+static unsigned int power_state[2];
+
 static void
 usb_simtec_powercontrol(int port, int to)
 {
 	pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
 
-	if (port == 1)
-		s3c2410_gpio_setpin(S3C2410_GPB4, to ? 0:1);
+	power_state[port] = to;
+
+	if (power_state[0] && power_state[1])
+		s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+	else
+		s3c2410_gpio_setpin(S3C2410_GPB4, 1);
 }
 
 static irqreturn_t
@@ -63,10 +71,10 @@ usb_simtec_ocirq(int irq, void *pw, struct pt_regs *regs)
 
 	if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
-		s3c2410_report_oc(info, 3);
+		s3c2410_usb_report_oc(info, 3);
 	} else {
 		pr_debug("usb_simtec: over-current irq (oc cleared)\n");
-		s3c2410_report_oc(info, 0);
+		s3c2410_usb_report_oc(info, 0);
 	}
 
 	return IRQ_HANDLED;
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index e33fe4229d0..3c655c54e23 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -383,6 +383,7 @@ static void __init build_mem_type_table(void)
 {
 	struct cachepolicy *cp;
 	unsigned int cr = get_cr();
+	unsigned int user_pgprot;
 	int cpu_arch = cpu_architecture();
 	int i;
 
@@ -408,6 +409,9 @@ static void __init build_mem_type_table(void)
 		}
 	}
 
+	cp = &cache_policies[cachepolicy];
+	user_pgprot = cp->pte;
+
 	/*
 	 * ARMv6 and above have extended page tables.
 	 */
@@ -426,11 +430,18 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 
+		/*
+		 * Mark the device area as "shared device"
+		 */
 		mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
 		mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
-	}
 
-	cp = &cache_policies[cachepolicy];
+		/*
+		 * User pages need to be mapped with the ASID
+		 * (iow, non-global)
+		 */
+		user_pgprot |= L_PTE_ASID;
+	}
 
 	if (cpu_arch >= CPU_ARCH_ARMv5) {
 		mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
@@ -448,7 +459,7 @@ static void __init build_mem_type_table(void)
 
 	for (i = 0; i < 16; i++) {
 		unsigned long v = pgprot_val(protection_map[i]);
-		v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | cp->pte;
+		v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
 		protection_map[i] = __pgprot(v);
 	}
 
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 352db98ee26..3429ddcf65d 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -111,12 +111,6 @@ ENTRY(cpu_v6_switch_mm)
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
 	mov	pc, lr
 
-#define nG	(1 << 11)
-#define APX	(1 << 9)
-#define AP1	(1 << 5)
-#define AP0	(1 << 4)
-#define XN	(1 << 0)
-
 /*
  *	cpu_v6_set_pte(ptep, pte)
  *
@@ -139,24 +133,24 @@ ENTRY(cpu_v6_switch_mm)
 ENTRY(cpu_v6_set_pte)
 	str	r1, [r0], #-2048		@ linux version
 
-	bic	r2, r1, #0x00000ff0
+	bic	r2, r1, #0x000007f0
 	bic	r2, r2, #0x00000003
-	orr	r2, r2, #AP0 | 2
+	orr	r2, r2, #PTE_EXT_AP0 | 2
 
 	tst	r1, #L_PTE_WRITE
 	tstne	r1, #L_PTE_DIRTY
-	orreq	r2, r2, #APX
+	orreq	r2, r2, #PTE_EXT_APX
 
 	tst	r1, #L_PTE_USER
-	orrne	r2, r2, #AP1 | nG
-	tstne	r2, #APX
-	bicne	r2, r2, #APX | AP0
+	orrne	r2, r2, #PTE_EXT_AP1
+	tstne	r2, #PTE_EXT_APX
+	bicne	r2, r2, #PTE_EXT_APX | PTE_EXT_AP0
 
 	tst	r1, #L_PTE_YOUNG
-	biceq	r2, r2, #APX | AP1 | AP0
+	biceq	r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK
 
 @	tst	r1, #L_PTE_EXEC
-@	orreq	r2, r2, #XN
+@	orreq	r2, r2, #PTE_EXT_XN
 
 	tst	r1, #L_PTE_PRESENT
 	moveq	r2, #0
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 16e37a535d8..30112816420 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -717,6 +717,9 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
 	DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
 	DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
 
+	/* enable LCD controller clock */
+	pxa_set_cken(CKEN16_LCD, 1);
+
 	/* Sequence from 11.7.10 */
 	LCCR3 = fbi->reg_lccr3;
 	LCCR2 = fbi->reg_lccr2;
@@ -750,6 +753,9 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
 
 	schedule_timeout(20 * HZ / 1000);
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
+
+	/* disable LCD controller clock */
+	pxa_set_cken(CKEN16_LCD, 0);
 }
 
 /*
@@ -1299,8 +1305,6 @@ int __init pxafb_probe(struct device *dev)
 		ret = -ENOMEM;
 		goto failed;
 	}
-	/* enable LCD controller clock */
-	pxa_set_cken(CKEN16_LCD, 1);
 
 	ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
 	if (ret) {
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
index 1cc85a096b2..bd43b566db3 100644
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ b/include/asm-arm/arch-s3c2410/usb-control.h
@@ -12,6 +12,7 @@
  * Changelog:
  *  11-Sep-2004 BJD  Created file
  *  21-Sep-2004 BJD  Updated port info
+ *  09-Aug-2005 BJD  Renamed s3c2410_report_oc s3c2410_usb_report_oc
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H
@@ -35,7 +36,7 @@ struct s3c2410_hcd_info {
 	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
 };
 
-static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports)
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
 {
 	if (info->report_oc != NULL) {
 		(info->report_oc)(info, ports);
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index a9892eb42a2..478c49b56e1 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -188,12 +188,18 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 /*
  *   - extended small page/tiny page
  */
+#define PTE_EXT_XN		(1 << 0)	/* v6 */
 #define PTE_EXT_AP_MASK		(3 << 4)
+#define PTE_EXT_AP0		(1 << 4)
+#define PTE_EXT_AP1		(2 << 4)
 #define PTE_EXT_AP_UNO_SRO	(0 << 4)
-#define PTE_EXT_AP_UNO_SRW	(1 << 4)
-#define PTE_EXT_AP_URO_SRW	(2 << 4)
-#define PTE_EXT_AP_URW_SRW	(3 << 4)
+#define PTE_EXT_AP_UNO_SRW	(PTE_EXT_AP0)
+#define PTE_EXT_AP_URO_SRW	(PTE_EXT_AP1)
+#define PTE_EXT_AP_URW_SRW	(PTE_EXT_AP1|PTE_EXT_AP0)
 #define PTE_EXT_TEX(x)		((x) << 6)	/* v5 */
+#define PTE_EXT_APX		(1 << 9)	/* v6 */
+#define PTE_EXT_SHARED		(1 << 10)	/* v6 */
+#define PTE_EXT_NG		(1 << 11)	/* v6 */
 
 /*
  *   - small page
@@ -224,6 +230,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define L_PTE_WRITE		(1 << 5)
 #define L_PTE_EXEC		(1 << 6)
 #define L_PTE_DIRTY		(1 << 7)
+#define L_PTE_SHARED		(1 << 10)	/* shared between CPUs (v6) */
+#define L_PTE_ASID		(1 << 11)	/* non-global (use ASID, v6) */
 
 #ifndef __ASSEMBLY__