System-specific handling of bus errors for DECstation variations

supporting parity errors only for memory (Pmax/3min/Maxine).
Fixes for resources decoded by the KN04/KN05 MB ASIC.  Additional
clean-ups for the ECC handler.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 files changed, 121 insertions, 70 deletions

diff --git a/arch/mips/dec/Makefile b/arch/mips/dec/Makefile
index 688757a97cb..ed181fdc3ac 100644
--- a/arch/mips/dec/Makefile
+++ b/arch/mips/dec/Makefile
@@ -2,8 +2,8 @@
 # Makefile for the DECstation family specific parts of the kernel
 #
 
-obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn02-irq.o reset.o \
-		   setup.o time.o
+obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
+		   kn02-irq.o kn02xa-berr.o reset.o setup.o time.o
 
 obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o
 obj-$(CONFIG_CPU_HAS_WB)	+= wbflush.o
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index a36503c95bb..8f3498aa43a 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -6,7 +6,7 @@
  *	5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
  *	5900/260 (KN05) systems.
  *
- *	Copyright (c) 2003  Maciej W. Rozycki
+ *	Copyright (c) 2003, 2005  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -15,6 +15,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
@@ -57,7 +58,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 
 	const char *kind, *agent, *cycle, *event;
 	const char *status = "", *xbit = "", *fmt = "";
-	dma_addr_t address;
+	unsigned long address;
 	u16 syn = 0, sngl;
 
 	int i = 0;
@@ -66,7 +67,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 	u32 chksyn = *kn0x_chksyn;
 	int action = MIPS_BE_FATAL;
 
-	/* For non-ECC ack ASAP, so any subsequent errors get caught. */
+	/* For non-ECC ack ASAP, so that any subsequent errors get caught. */
 	if ((erraddr & (KN0X_EAR_VALID | KN0X_EAR_ECCERR)) == KN0X_EAR_VALID)
 		dec_ecc_be_ack();
 
@@ -74,7 +75,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 
 	if (!(erraddr & KN0X_EAR_VALID)) {
 		/* No idea what happened. */
-		printk(KERN_ALERT "Unidentified bus error %s.\n", kind);
+		printk(KERN_ALERT "Unidentified bus error %s\n", kind);
 		return action;
 	}
 
@@ -126,7 +127,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 			/* Ack now, no rewrite will happen. */
 			dec_ecc_be_ack();
 
-			fmt = KERN_ALERT "%s" "invalid.\n";
+			fmt = KERN_ALERT "%s" "invalid\n";
 		} else {
 			sngl = syn & KN0X_ESR_SNGLO;
 			syn &= KN0X_ESR_SYNLO;
@@ -161,12 +162,12 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 				if (syn == 0x01) {
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at check bit C%s.\n";
+					      "at check bit C%s\n";
 					xbit = "X";
 				} else {
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at check bit C%s%u.\n";
+					      "at check bit C%s%u\n";
 				}
 				i = syn >> 2;
 			} else {
@@ -176,16 +177,16 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 				if (i < 32)
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at data bit D%s%u.\n";
+					      "at data bit D%s%u\n";
 				else
 					fmt = KERN_ALERT "%s"
-					      "%#04x -- %s bit error.\n";
+					      "%#04x -- %s bit error\n";
 			}
 		}
 	}
 
 	if (action != MIPS_BE_FIXUP)
-		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx.\n",
+		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
 			kind, agent, cycle, event, address);
 
 	if (action != MIPS_BE_FIXUP && erraddr & KN0X_EAR_ECCERR)
@@ -207,8 +208,8 @@ irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		return IRQ_HANDLED;
 
 	/*
-	 * FIXME: Find affected processes and kill them, otherwise we
-	 * must die.
+	 * FIXME: Find the affected processes and kill them, otherwise
+	 * we must die.
 	 *
 	 * The interrupt is asynchronously delivered thus EPC and RA
 	 * may be irrelevant, but are printed for a reference.
@@ -235,7 +236,7 @@ static inline void dec_kn02_be_init(void)
 	spin_lock_irqsave(&kn02_lock, flags);
 
 	/* Preset write-only bits of the Control Register cache. */
-	cached_kn02_csr = *csr | KN03_CSR_LEDS;
+	cached_kn02_csr = *csr | KN02_CSR_LEDS;
 
 	/* Set normal ECC detection and generation. */
 	cached_kn02_csr &= ~(KN02_CSR_DIAGCHK | KN02_CSR_DIAGGEN);
@@ -250,7 +251,7 @@ static inline void dec_kn02_be_init(void)
 static inline void dec_kn03_be_init(void)
 {
 	volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR);
-	volatile u32 *mbcs = (void *)(KN03_SLOT_BASE + KN05_MB_CSR);
+	volatile u32 *mbcs = (void *)(KN4K_SLOT_BASE + KN4K_MB_CSR);
 
 	kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
 	kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
@@ -265,7 +266,7 @@ static inline void dec_kn03_be_init(void)
 	*mcr = (*mcr & ~(KN03_MCR_DIAGCHK | KN03_MCR_DIAGGEN)) |
 	       KN03_MCR_CORRECT;
 	if (current_cpu_data.cputype == CPU_R4400SC)
-		*mbcs |= KN05_MB_CSR_EE;
+		*mbcs |= KN4K_MB_CSR_EE;
 	fast_iob();
 }
 
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index e0bfcd1521e..644085e1040 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -4,7 +4,7 @@
  *	DECstation 5000/200 (KN02) Control and Status Register
  *	interrupts.
  *
- *	Copyright (c) 2002, 2003  Maciej W. Rozycki
+ *	Copyright (c) 2002, 2003, 2005  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -111,7 +111,7 @@ void __init init_kn02_irqs(int base)
 
 	/* Mask interrupts. */
 	spin_lock_irqsave(&kn02_lock, flags);
-	cached_kn02_csr &= ~KN03_CSR_IOINTEN;
+	cached_kn02_csr &= ~KN02_CSR_IOINTEN;
 	*csr = cached_kn02_csr;
 	iob();
 	spin_unlock_irqrestore(&kn02_lock, flags);
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 82408ce710f..f63fb9cd43c 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -113,7 +113,16 @@ void __init dec_be_init(void)
 {
 	switch (mips_machtype) {
 	case MACH_DS23100:	/* DS2100/DS3100 Pmin/Pmax */
+		board_be_handler = dec_kn01_be_handler;
+		busirq.handler = dec_kn01_be_interrupt;
 		busirq.flags |= SA_SHIRQ;
+		dec_kn01_be_init();
+		break;
+	case MACH_DS5000_1XX:	/* DS5000/1xx 3min */
+	case MACH_DS5000_XX:	/* DS5000/xx Maxine */
+		board_be_handler = dec_kn02xa_be_handler;
+		busirq.handler = dec_kn02xa_be_interrupt;
+		dec_kn02xa_be_init();
 		break;
 	case MACH_DS5000_200:	/* DS5000/200 3max */
 	case MACH_DS5000_2X0:	/* DS5000/240 3max+ */
diff --git a/include/asm-mips/dec/ecc.h b/include/asm-mips/dec/ecc.h
index 724908b0bf1..19495a490e7 100644
--- a/include/asm-mips/dec/ecc.h
+++ b/include/asm-mips/dec/ecc.h
@@ -49,7 +49,8 @@ struct pt_regs;
 
 extern void dec_ecc_be_init(void);
 extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup);
-extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id,
+					struct pt_regs *regs);
 #endif
 
 #endif /* __ASM_MIPS_DEC_ECC_H */
diff --git a/include/asm-mips/dec/kn01.h b/include/asm-mips/dec/kn01.h
index 325fcbbbdfa..607a385ffd8 100644
--- a/include/asm-mips/dec/kn01.h
+++ b/include/asm-mips/dec/kn01.h
@@ -8,7 +8,7 @@
  *
  * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
  * are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
  */
 #ifndef __ASM_MIPS_DEC_KN01_H
 #define __ASM_MIPS_DEC_KN01_H
@@ -80,4 +80,22 @@
 #define KN01_CSR_VRGTRB		(1<<0)	/* red DAC voltage over blue (r/o) */
 #define KN01_CSR_LEDS		(0xff<<0) /* ~diagnostic LEDs (w/o) */
 
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+extern u16 cached_kn01_csr;
+extern spinlock_t kn01_lock;
+
+extern void dec_kn01_be_init(void);
+extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
+					 struct pt_regs *regs);
+#endif
+
 #endif /* __ASM_MIPS_DEC_KN01_H */
diff --git a/include/asm-mips/dec/kn02.h b/include/asm-mips/dec/kn02.h
index 2c935f972c6..83a042e9068 100644
--- a/include/asm-mips/dec/kn02.h
+++ b/include/asm-mips/dec/kn02.h
@@ -8,16 +8,11 @@
  *
  * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
  * are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
  */
 #ifndef __ASM_MIPS_DEC_KN02_H
 #define __ASM_MIPS_DEC_KN02_H
 
-#ifndef __ASSEMBLY__
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#endif
-
 #include <asm/addrspace.h>
 #include <asm/dec/ecc.h>
 
@@ -53,8 +48,8 @@
 #define KN02_CSR_PSU		(1<<27)		/* power supply unit warning */
 #define KN02_CSR_NVRAM		(1<<26)		/* ~NVRAM clear jumper */
 #define KN02_CSR_REFEVEN	(1<<25)		/* mem refresh bank toggle */
-#define KN03_CSR_NRMOD		(1<<24)		/* ~NRMOD manufact. jumper */
-#define KN03_CSR_IOINTEN	(0xff<<16)	/* IRQ mask bits */
+#define KN02_CSR_NRMOD		(1<<24)		/* ~NRMOD manufact. jumper */
+#define KN02_CSR_IOINTEN	(0xff<<16)	/* IRQ mask bits */
 #define KN02_CSR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
 #define KN02_CSR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
 #define KN02_CSR_CORRECT	(1<<13)		/* ECC correct/check */
@@ -63,8 +58,8 @@
 #define KN02_CSR_BNK32M		(1<<10)		/* 32M/8M stride */
 #define KN02_CSR_DIAGDN		(1<<9)		/* DIAGDN manufact. jumper */
 #define KN02_CSR_BAUD38		(1<<8)		/* DZ11 38/19kbps ext. rate */
-#define KN03_CSR_IOINT		(0xff<<0)	/* IRQ status bits (r/o) */
-#define KN03_CSR_LEDS		(0xff<<0)	/* ~diagnostic LEDs (w/o) */
+#define KN02_CSR_IOINT		(0xff<<0)	/* IRQ status bits (r/o) */
+#define KN02_CSR_LEDS		(0xff<<0)	/* ~diagnostic LEDs (w/o) */
 
 
 /*
@@ -98,6 +93,10 @@
 
 
 #ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
 extern u32 cached_kn02_csr;
 extern spinlock_t kn02_lock;
 extern void init_kn02_irqs(int base);
diff --git a/include/asm-mips/dec/kn02xa.h b/include/asm-mips/dec/kn02xa.h
index f6bdf730d9f..3c25a3346f3 100644
--- a/include/asm-mips/dec/kn02xa.h
+++ b/include/asm-mips/dec/kn02xa.h
@@ -9,7 +9,7 @@
  *
  * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
  * are by courtesy of Chris Fraser.
- * Copyright (C) 2000, 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2000, 2002, 2003, 2005  Maciej W. Rozycki
  *
  * These are addresses which have to be known early in the boot process.
  * For other addresses refer to tc.h, ioasic_addrs.h and friends.
@@ -52,8 +52,13 @@
 #define KN02XA_MER_PAGERR	(1<<16)		/* 2k page boundary error */
 #define KN02XA_MER_TRANSERR	(1<<15)		/* transfer length error */
 #define KN02XA_MER_PARDIS	(1<<14)		/* parity error disable */
-#define KN02XA_MER_RES_12	(0x3<<12)	/* unused */
-#define KN02XA_MER_BYTERR	(0xf<<8)	/* byte lane error bitmask */
+#define KN02XA_MER_SIZE		(1<<13)		/* r/o mirror of MSR_SIZE */
+#define KN02XA_MER_RES_12	(1<<12)		/* unused */
+#define KN02XA_MER_BYTERR	(0xf<<8)	/* byte lane error bitmask: */
+#define KN02XA_MER_BYTERR_3	(0x8<<8)	/* byte lane #3 */
+#define KN02XA_MER_BYTERR_2	(0x4<<8)	/* byte lane #2 */
+#define KN02XA_MER_BYTERR_1	(0x2<<8)	/* byte lane #1 */
+#define KN02XA_MER_BYTERR_0	(0x1<<8)	/* byte lane #0 */
 #define KN02XA_MER_RES_0	(0xff<<0)	/* unused */
 
 /*
@@ -72,4 +77,17 @@
 #define KN02XA_EAR_ADDRESS	(0x7ffffff<<2)	/* address involved */
 #define KN02XA_EAR_RES_0	(0x3<<0)	/* unused */
 
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_kn02xa_be_init(void);
+extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
+					   struct pt_regs *regs);
+#endif
+
 #endif /* __ASM_MIPS_DEC_KN02XA_H */
diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h
index b120362b8f1..61feac382ef 100644
--- a/include/asm-mips/dec/kn05.h
+++ b/include/asm-mips/dec/kn05.h
@@ -1,10 +1,12 @@
 /*
  *	include/asm-mips/dec/kn05.h
  *
- *	DECstation 5000/260 (4max+ or KN05) and DECsystem 5900/260
+ *	DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
+ *	or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
+ *	KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
  *	definitions.
  *
- *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *	Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -13,59 +15,62 @@
  *
  *	WARNING!  All this information is pure guesswork based on the
  *	ROM.  It is provided here in hope it will give someone some
- *	food for thought.  No documentation for the KN05 module has
- *	been located so far.
+ *	food for thought.  No documentation for the KN05 nor the KN04
+ *	module has been located so far.
  */
 #ifndef __ASM_MIPS_DEC_KN05_H
 #define __ASM_MIPS_DEC_KN05_H
 
+#include <asm/addrspace.h>
 #include <asm/dec/ioasic_addrs.h>
 
 /*
  * The oncard MB (Memory Buffer) ASIC provides an additional address
  * decoder.  Certain address ranges within the "high" 16 slots are
- * passed to the I/O ASIC's decoder like with the KN03.  Others are
- * handled locally.  "Low" slots are always passed.
+ * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
+ * Others are handled locally.  "Low" slots are always passed.
  */
-#define KN05_MB_ROM	(16*IOASIC_SLOT_SIZE)	/* KN05 card ROM */
-#define KN05_IOCTL	(17*IOASIC_SLOT_SIZE)	/* I/O ASIC */
-#define KN05_ESAR	(18*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
-#define KN05_LANCE	(19*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
-#define KN05_MB_INT	(20*IOASIC_SLOT_SIZE)	/* MB interrupt register */
-#define KN05_MB_EA	(21*IOASIC_SLOT_SIZE)	/* MB error address? */
-#define KN05_MB_EC	(22*IOASIC_SLOT_SIZE)	/* MB error ??? */
-#define KN05_MB_CSR	(23*IOASIC_SLOT_SIZE)	/* MB control & status */
-#define KN05_RES_24	(24*IOASIC_SLOT_SIZE)	/* unused? */
-#define KN05_RES_25	(25*IOASIC_SLOT_SIZE)	/* unused? */
-#define KN05_RES_26	(26*IOASIC_SLOT_SIZE)	/* unused? */
-#define KN05_RES_27	(27*IOASIC_SLOT_SIZE)	/* unused? */
-#define KN05_SCSI	(28*IOASIC_SLOT_SIZE)	/* ASC SCSI */
-#define KN05_RES_29	(29*IOASIC_SLOT_SIZE)	/* unused? */
-#define KN05_RES_30	(30*IOASIC_SLOT_SIZE)	/* unused? */
-#define KN05_RES_31	(31*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_SLOT_BASE	KSEG1ADDR(0x1fc00000)
+
+#define KN4K_MB_ROM	(0*IOASIC_SLOT_SIZE)	/* KN05/KN04 card ROM */
+#define KN4K_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
+#define KN4K_ESAR	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define KN4K_LANCE	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define KN4K_MB_INT	(4*IOASIC_SLOT_SIZE)	/* MB interrupt register */
+#define KN4K_MB_EA	(5*IOASIC_SLOT_SIZE)	/* MB error address? */
+#define KN4K_MB_EC	(6*IOASIC_SLOT_SIZE)	/* MB error ??? */
+#define KN4K_MB_CSR	(7*IOASIC_SLOT_SIZE)	/* MB control & status */
+#define KN4K_RES_08	(8*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_09	(9*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_10	(10*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_11	(11*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_SCSI	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define KN4K_RES_13	(13*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_14	(14*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
 
 /*
  * Bits for the MB interrupt register.
  * The register appears read-only.
  */
-#define KN05_MB_INT_TC		(1<<0)		/* TURBOchannel? */
-#define KN05_MB_INT_RTC		(1<<1)		/* RTC? */
-#define KN05_MB_INT_MT		(1<<3)		/* ??? */
+#define KN4K_MB_INT_TC		(1<<0)		/* TURBOchannel? */
+#define KN4K_MB_INT_RTC		(1<<1)		/* RTC? */
+#define KN4K_MB_INT_MT		(1<<3)		/* ??? */
 
 /*
  * Bits for the MB control & status register.
  * Set to 0x00bf8001 on my system by the ROM.
  */
-#define KN05_MB_CSR_PF		(1<<0)		/* PreFetching enable? */
-#define KN05_MB_CSR_F		(1<<1)		/* ??? */
-#define KN05_MB_CSR_ECC		(0xff<<2)	/* ??? */
-#define KN05_MB_CSR_OD		(1<<10)		/* ??? */
-#define KN05_MB_CSR_CP		(1<<11)		/* ??? */
-#define KN05_MB_CSR_UNC		(1<<12)		/* ??? */
-#define KN05_MB_CSR_IM		(1<<13)		/* ??? */
-#define KN05_MB_CSR_NC		(1<<14)		/* ??? */
-#define KN05_MB_CSR_EE		(1<<15)		/* (bus) Exception Enable? */
-#define KN05_MB_CSR_MSK		(0x1f<<16)	/* ??? */
-#define KN05_MB_CSR_FW		(1<<21)		/* ??? */
+#define KN4K_MB_CSR_PF		(1<<0)		/* PreFetching enable? */
+#define KN4K_MB_CSR_F		(1<<1)		/* ??? */
+#define KN4K_MB_CSR_ECC		(0xff<<2)	/* ??? */
+#define KN4K_MB_CSR_OD		(1<<10)		/* ??? */
+#define KN4K_MB_CSR_CP		(1<<11)		/* ??? */
+#define KN4K_MB_CSR_UNC		(1<<12)		/* ??? */
+#define KN4K_MB_CSR_IM		(1<<13)		/* ??? */
+#define KN4K_MB_CSR_NC		(1<<14)		/* ??? */
+#define KN4K_MB_CSR_EE		(1<<15)		/* (bus) Exception Enable? */
+#define KN4K_MB_CSR_MSK		(0x1f<<16)	/* ??? */
+#define KN4K_MB_CSR_FW		(1<<21)		/* ??? */
 
 #endif /* __ASM_MIPS_DEC_KN05_H */