aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorarnaud.patard@rtp-net.org <arnaud.patard@rtp-net.org>2009-11-17 14:54:59 +0100
committerBen Dooks <ben-linux@fluff.org>2009-12-01 01:35:06 +0000
commit1a71e4ade19d51bab03b6837d4d33a953e4e1206 (patch)
tree820d86dfcf46298467ffe35eee70f9332d76e39b
parent22e649ff2e162d3c6ce2a78c377863aab826a8b8 (diff)
ARM: H1940: Convert h1940 bluetooth driver to rfkill
Better using standard interfaces to enable/disable bluetooth Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-rw-r--r--arch/arm/mach-s3c2410/Kconfig8
-rw-r--r--arch/arm/mach-s3c2410/Makefile3
-rw-r--r--arch/arm/mach-s3c2410/h1940-bluetooth.c88
3 files changed, 52 insertions, 47 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3d4e9da3fa5..dd1fcc7e670 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -81,6 +81,14 @@ config ARCH_H1940
help
Say Y here if you are using the HP IPAQ H1940
+config H1940BT
+ tristate "Control the state of H1940 bluetooth chip"
+ depends on ARCH_H1940
+ select RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on h1940.
+
config PM_H1940
bool
help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 2ab5ba4b266..0d468e96e83 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
# Machine support
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940) += mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
+obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
obj-$(CONFIG_PM_H1940) += pm-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5aabf117cbb..b7d1f8d27bc 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -17,6 +17,7 @@
#include <linux/ctype.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/rfkill.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
@@ -24,21 +25,10 @@
#define DRV_NAME "h1940-bt"
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
/* Bluetooth control */
static void h1940bt_enable(int on)
{
if (on) {
-#ifdef CONFIG_LEDS_H1940
- /* flashing Blue */
- led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
/* Power on the chip */
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
/* Reset the chip */
@@ -46,48 +36,31 @@ static void h1940bt_enable(int on)
s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
- state = 1;
}
else {
-#ifdef CONFIG_LEDS_H1940
- led_trigger_event(bt_led_trigger, 0);
-#endif
-
s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
- state = 0;
}
}
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
{
- return snprintf(buf, PAGE_SIZE, "%d\n", state);
+ h1940bt_enable(!blocked);
+ return 0;
}
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
- int new_state;
- char *endp;
-
- new_state = simple_strtoul(buf, &endp, 0);
- if (*endp && !isspace(*endp))
- return -EINVAL;
-
- h1940bt_enable(new_state);
-
- return count;
-}
-static DEVICE_ATTR(enable, 0644,
- h1940bt_show,
- h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+ .set_block = h1940bt_set_block,
+};
static int __init h1940bt_probe(struct platform_device *pdev)
{
+ struct rfkill *rfk;
+ int ret = 0;
+
/* Configures BT serial port GPIOs */
s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev)
s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
-#ifdef CONFIG_LEDS_H1940
- led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
- /* disable BT by default */
- h1940bt_enable(0);
+ rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+ &h1940bt_rfkill_ops, NULL);
+ if (!rfk) {
+ ret = -ENOMEM;
+ goto err_rfk_alloc;
+ }
+
+ rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+ ret = rfkill_register(rfk);
+ if (ret)
+ goto err_rfkill;
+
+ platform_set_drvdata(pdev, rfk);
+
+ return 0;
- return device_create_file(&pdev->dev, &dev_attr_enable);
+err_rfkill:
+ rfkill_destroy(rfk);
+err_rfk_alloc:
+ return ret;
}
static int h1940bt_remove(struct platform_device *pdev)
{
-#ifdef CONFIG_LEDS_H1940
- led_trigger_unregister_simple(bt_led_trigger);
-#endif
+ struct rfkill *rfk = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (rfk) {
+ rfkill_unregister(rfk);
+ rfkill_destroy(rfk);
+ }
+ rfk = NULL;
+
+ h1940bt_enable(0);
+
return 0;
}