diff options
author | Stephen Rothwell <sfr@canb.auug.org.au> | 2006-09-25 18:19:00 +1000 |
---|---|---|
committer | Stephen Rothwell <sfr@canb.auug.org.au> | 2006-10-03 16:50:21 +1000 |
commit | 3f639ee8c52c187d8c95db430ac6f485bffbe5af (patch) | |
tree | 26299497413aba786f962960c4a3cf83aa81f42b | |
parent | fc246c389db7b08b4a054e68c742c6598b02523c (diff) |
[POWERPC] implement BEGIN/END_FW_FTR_SECTION
and use it an all the obvious places in assembler code.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-rw-r--r-- | arch/powerpc/kernel/entry_64.S | 18 | ||||
-rw-r--r-- | arch/powerpc/kernel/head_64.S | 28 | ||||
-rw-r--r-- | arch/powerpc/kernel/misc_64.S | 46 | ||||
-rw-r--r-- | arch/powerpc/kernel/vmlinux.lds.S | 8 | ||||
-rw-r--r-- | arch/powerpc/mm/slb_low.S | 3 | ||||
-rw-r--r-- | include/asm-powerpc/firmware.h | 67 |
6 files changed, 137 insertions, 33 deletions
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 2cd872b5283..748e74fcf54 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -27,10 +27,7 @@ #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/cputable.h> - -#ifdef CONFIG_PPC_ISERIES -#define DO_SOFT_DISABLE -#endif +#include <asm/firmware.h> /* * System calls. @@ -91,6 +88,7 @@ system_call_common: ld r11,exception_marker@toc(r2) std r11,-16(r9) /* "regshere" marker */ #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION /* Hack for handling interrupts when soft-enabling on iSeries */ cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ andi. r10,r12,MSR_PR /* from kernel */ @@ -98,6 +96,7 @@ system_call_common: beq hardware_interrupt_entry lbz r10,PACAPROCENABLED(r13) std r10,SOFTE(r1) +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif mfmsr r11 ori r11,r11,MSR_EE @@ -462,6 +461,7 @@ _GLOBAL(ret_from_except_lite) restore: #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION ld r5,SOFTE(r1) cmpdi 0,r5,0 beq 4f @@ -480,6 +480,7 @@ restore: b .ret_from_except_lite /* loop back and handle more */ 4: stb r5,PACAPROCENABLED(r13) +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif ld r3,_MSR(r1) @@ -538,18 +539,23 @@ do_work: lwz r8,TI_PREEMPT(r9) cmpwi cr1,r8,0 #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION ld r0,SOFTE(r1) cmpdi r0,0 -#else - andi. r0,r3,MSR_EE +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif +BEGIN_FW_FTR_SECTION + andi. r0,r3,MSR_EE +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) crandc eq,cr1*4+eq,eq bne restore /* here we are preempting the current task */ 1: #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION li r0,1 stb r0,PACAPROCENABLED(r13) +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif ori r10,r10,MSR_EE mtmsrd r10,1 /* reenable interrupts */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 3065b472b95..645c7f10fb2 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -33,6 +33,7 @@ #include <asm/hvcall.h> #include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> +#include <asm/firmware.h> #ifdef CONFIG_PPC_ISERIES #define DO_SOFT_DISABLE @@ -365,19 +366,28 @@ label##_iSeries: \ #ifdef DO_SOFT_DISABLE #define DISABLE_INTS \ +BEGIN_FW_FTR_SECTION; \ lbz r10,PACAPROCENABLED(r13); \ li r11,0; \ std r10,SOFTE(r1); \ mfmsr r10; \ stb r11,PACAPROCENABLED(r13); \ ori r10,r10,MSR_EE; \ - mtmsrd r10,1 + mtmsrd r10,1; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #define ENABLE_INTS \ +BEGIN_FW_FTR_SECTION; \ lbz r10,PACAPROCENABLED(r13); \ mfmsr r11; \ std r10,SOFTE(r1); \ ori r11,r11,MSR_EE; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES); \ +BEGIN_FW_FTR_SECTION; \ + ld r12,_MSR(r1); \ + mfmsr r11; \ + rlwimi r11,r12,0,MSR_EE; \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ mtmsrd r11,1 #else /* hard enable/disable interrupts */ @@ -1071,8 +1081,10 @@ _GLOBAL(slb_miss_realmode) ld r3,PACA_EXSLB+EX_R3(r13) lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION ld r11,PACALPPACAPTR(r13) ld r11,LPPACASRR0(r11) /* get SRR0 value */ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ mtlr r10 @@ -1087,8 +1099,10 @@ _GLOBAL(slb_miss_realmode) .machine pop #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r12 +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ ld r9,PACA_EXSLB+EX_R9(r13) ld r10,PACA_EXSLB+EX_R10(r13) @@ -1301,6 +1315,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) cmpdi r3,0 /* see if hash_page succeeded */ #ifdef DO_SOFT_DISABLE +BEGIN_FW_FTR_SECTION /* * If we had interrupts soft-enabled at the point where the * DSI/ISI occurred, and an interrupt came in during hash_page, @@ -1321,12 +1336,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) ld r3,SOFTE(r1) bl .local_irq_restore b 11f -#else +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif +BEGIN_FW_FTR_SECTION beq fast_exception_return /* Return from exception on success */ ble- 12f /* Failure return from hash_page */ /* fall through */ -#endif +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* Here we have a page fault that hash_page can't handle. */ _GLOBAL(handle_page_fault) @@ -1861,7 +1878,9 @@ _GLOBAL(__secondary_start) LOAD_REG_ADDR(r3, .start_secondary_prolog) LOAD_REG_IMMEDIATE(r4, MSR_KERNEL) #ifdef DO_SOFT_DISABLE +BEGIN_FW_FTR_SECTION ori r4,r4,MSR_EE +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 @@ -1986,6 +2005,7 @@ _STATIC(start_here_common) */ li r3,0 bl .do_cpu_ftr_fixups + bl .do_fw_ftr_fixups /* ptr to current */ LOAD_REG_IMMEDIATE(r4, init_task) @@ -2000,11 +2020,13 @@ _STATIC(start_here_common) /* Load up the kernel context */ 5: #ifdef DO_SOFT_DISABLE +BEGIN_FW_FTR_SECTION li r5,0 stb r5,PACAPROCENABLED(r13) /* Soft Disabled */ mfmsr r5 ori r5,r5,MSR_EE /* Hard Enabled */ mtmsrd r5 +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif bl .start_kernel diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index e3ed21cd3d9..465a7641cd0 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -325,6 +325,52 @@ _GLOBAL(do_cpu_ftr_fixups) isync b 1b +/* + * do_fw_ftr_fixups - goes through the list of firmware feature fixups + * and writes nop's over sections of code that don't apply for this firmware. + * r3 = data offset (not changed) + */ +_GLOBAL(do_fw_ftr_fixups) + /* Get firmware features */ + LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features) + sub r6,r6,r3 + ld r4,0(r6) + /* Get the fixup table */ + LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup) + sub r6,r6,r3 + LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup) + sub r7,r7,r3 + /* Do the fixup */ +1: cmpld r6,r7 + bgelr + addi r6,r6,32 + ld r8,-32(r6) /* mask */ + and r8,r8,r4 + ld r9,-24(r6) /* value */ + cmpld r8,r9 + beq 1b + ld r8,-16(r6) /* section begin */ + ld r9,-8(r6) /* section end */ + subf. r9,r8,r9 + beq 1b + /* write nops over the section of code */ + /* todo: if large section, add a branch at the start of it */ + srwi r9,r9,2 + mtctr r9 + sub r8,r8,r3 + lis r0,0x60000000@h /* nop */ +3: stw r0,0(r8) +BEGIN_FTR_SECTION + dcbst 0,r8 /* suboptimal, but simpler */ + sync + icbi 0,r8 +END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE) + addi r8,r8,4 + bdnz 3b + sync /* additional sync needed on g4 */ + isync + b 1b + #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /* * Do an IO access in real mode diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 02665a02130..cb0e8d46c3e 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -132,6 +132,14 @@ SECTIONS *(__ftr_fixup) __stop___ftr_fixup = .; } +#ifdef CONFIG_PPC64 + . = ALIGN(8); + __fw_ftr_fixup : { + __start___fw_ftr_fixup = .; + *(__fw_ftr_fixup) + __stop___fw_ftr_fixup = .; + } +#endif . = ALIGN(PAGE_SIZE); .init.ramfs : { diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index dbc1abbde03..b10e4707d7c 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -21,6 +21,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/pgtable.h> +#include <asm/firmware.h> /* void slb_allocate_realmode(unsigned long ea); * @@ -183,6 +184,7 @@ slb_finish_load: * dont have any LRU information to help us choose a slot. */ #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION /* * On iSeries, the "bolted" stack segment can be cast out on * shared processor switch so we need to check for a miss on @@ -194,6 +196,7 @@ slb_finish_load: li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */ cmpld r9,r3 beq 3f +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ ld r10,PACASTABRR(r13) diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index 77069df92bf..1022737f4f3 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -14,34 +14,36 @@ #ifdef __KERNEL__ -#ifndef __ASSEMBLY__ +#include <asm/asm-compat.h> /* firmware feature bitmask values */ #define FIRMWARE_MAX_FEATURES 63 -#define FW_FEATURE_PFT (1UL<<0) -#define FW_FEATURE_TCE (1UL<<1) -#define FW_FEATURE_SPRG0 (1UL<<2) -#define FW_FEATURE_DABR (1UL<<3) -#define FW_FEATURE_COPY (1UL<<4) -#define FW_FEATURE_ASR (1UL<<5) -#define FW_FEATURE_DEBUG (1UL<<6) -#define FW_FEATURE_TERM (1UL<<7) -#define FW_FEATURE_PERF (1UL<<8) -#define FW_FEATURE_DUMP (1UL<<9) -#define FW_FEATURE_INTERRUPT (1UL<<10) -#define FW_FEATURE_MIGRATE (1UL<<11) -#define FW_FEATURE_PERFMON (1UL<<12) -#define FW_FEATURE_CRQ (1UL<<13) -#define FW_FEATURE_VIO (1UL<<14) -#define FW_FEATURE_RDMA (1UL<<15) -#define FW_FEATURE_LLAN (1UL<<16) -#define FW_FEATURE_BULK (1UL<<17) -#define FW_FEATURE_XDABR (1UL<<18) -#define FW_FEATURE_MULTITCE (1UL<<19) -#define FW_FEATURE_SPLPAR (1UL<<20) -#define FW_FEATURE_ISERIES (1UL<<21) -#define FW_FEATURE_LPAR (1UL<<22) +#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001) +#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002) +#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004) +#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008) +#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010) +#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020) +#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040) +#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080) +#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100) +#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200) +#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400) +#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800) +#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000) +#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000) +#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000) +#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000) +#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000) +#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000) +#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000) +#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000) +#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) +#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) +#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) + +#ifndef __ASSEMBLY__ enum { #ifdef CONFIG_PPC64 @@ -94,6 +96,23 @@ extern void machine_check_fwnmi(void); /* This is true if we are using the firmware NMI handler (typically LPAR) */ extern int fwnmi_active; +#else /* __ASSEMBLY__ */ + +#define BEGIN_FW_FTR_SECTION 96: + +#define END_FW_FTR_SECTION(msk, val) \ +97: \ + .section __fw_ftr_fixup,"a"; \ + .align 3; \ + .llong msk; \ + .llong val; \ + .llong 96b; \ + .llong 97b; \ + .previous + +#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) +#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_FIRMWARE_H */ |