aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorFrancois Romieu <romieu@fr.zoreil.com>2008-07-11 00:29:19 +0200
committerJeff Garzik <jgarzik@redhat.com>2008-07-11 01:11:42 -0400
commit4422b00390749f8b877b2838a99ef2948ae08a58 (patch)
treecc02474e39116f7cb3e758bfa37f3171498b739b
parent29d0a2b0f7b5f53c79095a5539ee3884afb354b6 (diff)
cxgb: delete non NAPI code from the driver.
Compile-tested only. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r--drivers/net/Kconfig8
-rw-r--r--drivers/net/chelsio/cxgb2.c2
-rw-r--r--drivers/net/chelsio/sge.c70
3 files changed, 5 insertions, 75 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4675c1bd6fb..50ca1cf1271 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2378,14 +2378,6 @@ config CHELSIO_T1_1G
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
-config CHELSIO_T1_NAPI
- bool "Use Rx Polling (NAPI)"
- depends on CHELSIO_T1
- default y
- help
- NAPI is a driver API designed to reduce CPU and interrupt load
- when the driver is receiving lots of packets from the card.
-
config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
depends on PCI && INET
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index a509337eab2..638c9a27a7a 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -1153,9 +1153,7 @@ static int __devinit init_one(struct pci_dev *pdev,
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = t1_netpoll;
#endif
-#ifdef CONFIG_CHELSIO_T1_NAPI
netif_napi_add(netdev, &adapter->napi, t1_poll, 64);
-#endif
SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops);
}
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 8a7efd38e95..d6c7d2aa761 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1396,20 +1396,10 @@ static void sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
if (unlikely(adapter->vlan_grp && p->vlan_valid)) {
st->vlan_xtract++;
-#ifdef CONFIG_CHELSIO_T1_NAPI
- vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
- ntohs(p->vlan));
-#else
- vlan_hwaccel_rx(skb, adapter->vlan_grp,
- ntohs(p->vlan));
-#endif
- } else {
-#ifdef CONFIG_CHELSIO_T1_NAPI
+ vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
+ ntohs(p->vlan));
+ } else
netif_receive_skb(skb);
-#else
- netif_rx(skb);
-#endif
- }
}
/*
@@ -1568,7 +1558,6 @@ static inline int responses_pending(const struct adapter *adapter)
return (e->GenerationBit == Q->genbit);
}
-#ifdef CONFIG_CHELSIO_T1_NAPI
/*
* A simpler version of process_responses() that handles only pure (i.e.,
* non data-carrying) responses. Such respones are too light-weight to justify
@@ -1636,9 +1625,6 @@ int t1_poll(struct napi_struct *napi, int budget)
return work_done;
}
-/*
- * NAPI version of the main interrupt handler.
- */
irqreturn_t t1_interrupt(int irq, void *data)
{
struct adapter *adapter = data;
@@ -1656,7 +1642,8 @@ irqreturn_t t1_interrupt(int irq, void *data)
else {
/* no data, no NAPI needed */
writel(sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
- napi_enable(&adapter->napi); /* undo schedule_prep */
+ /* undo schedule_prep */
+ napi_enable(&adapter->napi);
}
}
return IRQ_HANDLED;
@@ -1672,53 +1659,6 @@ irqreturn_t t1_interrupt(int irq, void *data)
return IRQ_RETVAL(handled != 0);
}
-#else
-/*
- * Main interrupt handler, optimized assuming that we took a 'DATA'
- * interrupt.
- *
- * 1. Clear the interrupt
- * 2. Loop while we find valid descriptors and process them; accumulate
- * information that can be processed after the loop
- * 3. Tell the SGE at which index we stopped processing descriptors
- * 4. Bookkeeping; free TX buffers, ring doorbell if there are any
- * outstanding TX buffers waiting, replenish RX buffers, potentially
- * reenable upper layers if they were turned off due to lack of TX
- * resources which are available again.
- * 5. If we took an interrupt, but no valid respQ descriptors was found we
- * let the slow_intr_handler run and do error handling.
- */
-irqreturn_t t1_interrupt(int irq, void *cookie)
-{
- int work_done;
- struct adapter *adapter = cookie;
- struct respQ *Q = &adapter->sge->respQ;
-
- spin_lock(&adapter->async_lock);
-
- writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
-
- if (likely(responses_pending(adapter)))
- work_done = process_responses(adapter, -1);
- else
- work_done = t1_slow_intr_handler(adapter);
-
- /*
- * The unconditional clearing of the PL_CAUSE above may have raced
- * with DMA completion and the corresponding generation of a response
- * to cause us to miss the resulting data interrupt. The next write
- * is also unconditional to recover the missed interrupt and render
- * this race harmless.
- */
- writel(Q->cidx, adapter->regs + A_SG_SLEEPING);
-
- if (!work_done)
- adapter->sge->stats.unhandled_irqs++;
- spin_unlock(&adapter->async_lock);
- return IRQ_RETVAL(work_done != 0);
-}
-#endif
-
/*
* Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
*