[PATCH] IB/ipath - program intconfig register using new HT irq hook

Eric's changes to the htirq infrastructure require corresponding
modifications to the ipath HT driver code so that interrupts are still
delivered properly.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5 files changed, 74 insertions, 82 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index b4ffaa7bcbb..09a13c1fc46 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -304,7 +304,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	}
 	addr = pci_resource_start(pdev, 0);
 	len = pci_resource_len(pdev, 0);
-	ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %x, vend %x/%x "
+	ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x "
 		   "driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
 		   ent->device, ent->driver_data);
 
@@ -467,15 +467,15 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	 * check 0 irq after we return from chip-specific bus setup, since
 	 * that can affect this due to setup
 	 */
-	if (!pdev->irq)
+	if (!dd->ipath_irq)
 		ipath_dev_err(dd, "irq is 0, BIOS error?  Interrupts won't "
 			      "work\n");
 	else {
-		ret = request_irq(pdev->irq, ipath_intr, IRQF_SHARED,
+		ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
 				  IPATH_DRV_NAME, dd);
 		if (ret) {
 			ipath_dev_err(dd, "Couldn't setup irq handler, "
-				      "irq=%u: %d\n", pdev->irq, ret);
+				      "irq=%d: %d\n", dd->ipath_irq, ret);
 			goto bail_iounmap;
 		}
 	}
@@ -637,11 +637,10 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev)
 	 * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
 	 * for all versions of the driver, if they were allocated
 	 */
-	if (pdev->irq) {
-		ipath_cdbg(VERBOSE,
-			   "unit %u free_irq of irq %x\n",
-			   dd->ipath_unit, pdev->irq);
-		free_irq(pdev->irq, dd);
+	if (dd->ipath_irq) {
+		ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
+			   dd->ipath_unit, dd->ipath_irq);
+		dd->ipath_f_free_irq(dd);
 	} else
 		ipath_dbg("irq is 0, not doing free_irq "
 			  "for unit %u\n", dd->ipath_unit);
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 9e4e8d4c6e2..e57c7a351cb 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -38,6 +38,7 @@
 
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/htirq.h>
 
 #include "ipath_kernel.h"
 #include "ipath_registers.h"
@@ -913,49 +914,40 @@ static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
 	}
 }
 
-static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev,
-			    int pos)
+static int ipath_ht_intconfig(struct ipath_devdata *dd)
 {
-	u32 int_handler_addr_lower;
-	u32 int_handler_addr_upper;
-	u64 ihandler;
-	u32 intvec;
+	int ret;
 
-	/* use indirection register to get the intr handler */
-	pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x10);
-	pci_read_config_dword(pdev, pos + 4, &int_handler_addr_lower);
-	pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x11);
-	pci_read_config_dword(pdev, pos + 4, &int_handler_addr_upper);
+	if (dd->ipath_intconfig) {
+		ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
+				 dd->ipath_intconfig);	/* interrupt address */
+		ret = 0;
+	} else {
+		ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
+			      "interrupt address\n");
+		ret = -EINVAL;
+	}
 
-	ihandler = (u64) int_handler_addr_lower |
-		((u64) int_handler_addr_upper << 32);
+	return ret;
+}
+
+static void ipath_ht_irq_update(struct pci_dev *dev, int irq,
+				struct ht_irq_msg *msg)
+{
+	struct ipath_devdata *dd = pci_get_drvdata(dev);
+	u64 prev_intconfig = dd->ipath_intconfig;
+
+	dd->ipath_intconfig = msg->address_lo;
+	dd->ipath_intconfig |= ((u64) msg->address_hi) << 32;
 
 	/*
-	 * kernels with CONFIG_PCI_MSI set the vector in the irq field of
-	 * struct pci_device, so we use that to program the internal
-	 * interrupt register (not config space) with that value. The BIOS
-	 * must still have done the basic MSI setup.
-	 */
-	intvec = pdev->irq;
-	/*
-	 * clear any vector bits there; normally not set but we'll overload
-	 * this for some debug purposes (setting the HTC debug register
-	 * value from software, rather than GPIOs), so it might be set on a
-	 * driver reload.
+	 * If the previous value of dd->ipath_intconfig is zero, we're
+	 * getting configured for the first time, and must not program the
+	 * intconfig register here (it will be programmed later, when the
+	 * hardware is ready).  Otherwise, we should.
 	 */
-	ihandler &= ~0xff0000;
-	/* x86 vector goes in intrinfo[23:16] */
-	ihandler |= intvec << 16;
-	ipath_cdbg(VERBOSE, "ihandler lower %x, upper %x, intvec %x, "
-		   "interruptconfig %llx\n", int_handler_addr_lower,
-		   int_handler_addr_upper, intvec,
-		   (unsigned long long) ihandler);
-
-	/* can't program yet, so save for interrupt setup */
-	dd->ipath_intconfig = ihandler;
-	/* keep going, so we find link control stuff also */
-
-	return ihandler != 0;
+	if (prev_intconfig)
+		ipath_ht_intconfig(dd);
 }
 
 /**
@@ -971,12 +963,19 @@ static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev,
 static int ipath_setup_ht_config(struct ipath_devdata *dd,
 				 struct pci_dev *pdev)
 {
-	int pos, ret = 0;
-	int ihandler = 0;
+	int pos, ret;
+
+	ret = __ht_create_irq(pdev, 0, ipath_ht_irq_update);
+	if (ret < 0) {
+		ipath_dev_err(dd, "Couldn't create interrupt handler: "
+			      "err %d\n", ret);
+		goto bail;
+	}
+	dd->ipath_irq = ret;
+	ret = 0;
 
 	/*
-	 * Read the capability info to find the interrupt info, and also
-	 * handle clearing CRC errors in linkctrl register if necessary.  We
+	 * Handle clearing CRC errors in linkctrl register if necessary.  We
 	 * do this early, before we ever enable errors or hardware errors,
 	 * mostly to avoid causing the chip to enter freeze mode.
 	 */
@@ -1000,17 +999,9 @@ static int ipath_setup_ht_config(struct ipath_devdata *dd,
 		}
 		if (!(cap_type & 0xE0))
 			slave_or_pri_blk(dd, pdev, pos, cap_type);
-		else if (cap_type == HT_INTR_DISC_CONFIG)
-			ihandler = set_int_handler(dd, pdev, pos);
 	} while ((pos = pci_find_next_capability(pdev, pos,
 						 PCI_CAP_ID_HT)));
 
-	if (!ihandler) {
-		ipath_dev_err(dd, "Couldn't find interrupt handler in "
-			      "config space\n");
-		ret = -ENODEV;
-	}
-
 bail:
 	return ret;
 }
@@ -1360,25 +1351,6 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
 }
 
-static int ipath_ht_intconfig(struct ipath_devdata *dd)
-{
-	int ret;
-
-	if (!dd->ipath_intconfig) {
-		ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
-			      "interrupt address\n");
-		ret = 1;
-		goto bail;
-	}
-
-	ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
-			 dd->ipath_intconfig);	/* interrupt address */
-	ret = 0;
-
-bail:
-	return ret;
-}
-
 /**
  * ipath_pe_put_tid - write a TID in chip
  * @dd: the infinipath device
@@ -1575,6 +1547,14 @@ static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
 	return 0;
 }
 
+static void ipath_ht_free_irq(struct ipath_devdata *dd)
+{
+	free_irq(dd->ipath_irq, dd);
+	ht_destroy_irq(dd->ipath_irq);
+	dd->ipath_irq = 0;
+	dd->ipath_intconfig = 0;
+}
+
 /**
  * ipath_init_iba6110_funcs - set up the chip-specific function pointers
  * @dd: the infinipath device
@@ -1598,6 +1578,7 @@ void ipath_init_iba6110_funcs(struct ipath_devdata *dd)
 	dd->ipath_f_cleanup = ipath_setup_ht_cleanup;
 	dd->ipath_f_setextled = ipath_setup_ht_setextled;
 	dd->ipath_f_get_base_info = ipath_ht_get_base_info;
+	dd->ipath_f_free_irq = ipath_ht_free_irq;
 
 	/*
 	 * initialize chip-specific variables
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index a72ab9de386..6af89683f71 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -851,6 +851,7 @@ static int ipath_setup_pe_config(struct ipath_devdata *dd,
 	int pos, ret;
 
 	dd->ipath_msi_lo = 0;	/* used as a flag during reset processing */
+	dd->ipath_irq = pdev->irq;
 	ret = pci_enable_msi(dd->pcidev);
 	if (ret)
 		ipath_dev_err(dd, "pci_enable_msi failed: %d, "
@@ -1323,6 +1324,12 @@ done:
 	return 0;
 }
 
+static void ipath_pe_free_irq(struct ipath_devdata *dd)
+{
+	free_irq(dd->ipath_irq, dd);
+	dd->ipath_irq = 0;
+}
+
 /**
  * ipath_init_iba6120_funcs - set up the chip-specific function pointers
  * @dd: the infinipath device
@@ -1349,6 +1356,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd)
 	dd->ipath_f_cleanup = ipath_setup_pe_cleanup;
 	dd->ipath_f_setextled = ipath_setup_pe_setextled;
 	dd->ipath_f_get_base_info = ipath_pe_get_base_info;
+	dd->ipath_f_free_irq = ipath_pe_free_irq;
 
 	/* initialize chip-specific variables */
 	dd->ipath_f_tidtemplate = ipath_pe_tidtemplate;
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index d9079ee1203..5652a550d44 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -710,14 +710,14 @@ static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp)
 			 * linuxbios development work, and it may happen in
 			 * the future again.
 			 */
-			if (dd->pcidev && dd->pcidev->irq) {
+			if (dd->pcidev && dd->ipath_irq) {
 				ipath_dev_err(dd, "Now %u unexpected "
 					      "interrupts, unregistering "
 					      "interrupt handler\n",
 					      *unexpectp);
-				ipath_dbg("free_irq of irq %x\n",
-					  dd->pcidev->irq);
-				free_irq(dd->pcidev->irq, dd);
+				ipath_dbg("free_irq of irq %d\n",
+					  dd->ipath_irq);
+				dd->ipath_f_free_irq(dd);
 			}
 		}
 		if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) {
@@ -753,7 +753,7 @@ static void ipath_bad_regread(struct ipath_devdata *dd)
 		if (allbits == 2) {
 			ipath_dev_err(dd, "Still bad interrupt status, "
 				      "unregistering interrupt\n");
-			free_irq(dd->pcidev->irq, dd);
+			dd->ipath_f_free_irq(dd);
 		} else if (allbits > 2) {
 			if ((allbits % 10000) == 0)
 				printk(".");
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 06d5020a2f6..986b2125b8f 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -213,6 +213,8 @@ struct ipath_devdata {
 	void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
 	/* fill out chip-specific fields */
 	int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
+	/* free irq */
+	void (*ipath_f_free_irq)(struct ipath_devdata *);
 	struct ipath_ibdev *verbs_dev;
 	struct timer_list verbs_timer;
 	/* total dwords sent (summed from counter) */
@@ -328,6 +330,8 @@ struct ipath_devdata {
 	/* so we can rewrite it after a chip reset */
 	u32 ipath_pcibar1;
 
+	/* interrupt number */
+	int ipath_irq;
 	/* HT/PCI Vendor ID (here for NodeInfo) */
 	u16 ipath_vendorid;
 	/* HT/PCI Device ID (here for NodeInfo) */