[POWERPC] Add QUICC Engine (QE) infrastructure

Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.

Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:

"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support.  Qe_lib is used by
QE device drivers such as ucc_geth driver.

This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.

v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.

v3: Address comments from Kumar;  Update definition of several
device tree nodes;  Copyright style change."

In addition, the following changes have been made:

o removed typedefs
o uint -> u32 conversions
o removed following defines:
  QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
  BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
  because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

18 files changed, 4007 insertions, 14 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b29adaa9734..2587468eec4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -351,6 +351,16 @@ config APUS
 	  <http://linux-apus.sourceforge.net/>.
 endchoice
 
+config QUICC_ENGINE
+	bool
+	depends on PPC_MPC836x || PPC_MPC832x
+	default y
+	help
+	  The QUICC Engine (QE) is a new generation of communications
+	  coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+	  Selecting this option means that you wish to build a kernel
+	  for a machine with a QE coprocessor.
+
 config PPC_PSERIES
 	depends on PPC_MULTIPLATFORM && PPC64
 	bool "IBM pSeries & new (POWER5-based) iSeries"
@@ -1059,6 +1069,8 @@ source "fs/Kconfig"
 
 # XXX source "arch/ppc/8260_io/Kconfig"
 
+source "arch/powerpc/sysdev/qe_lib/Kconfig"
+
 source "arch/powerpc/platforms/iseries/Kconfig"
 
 source "lib/Kconfig"
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index f15f4d78aee..91f052d8cce 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_PPC_TODC)		+= todc.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
+obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
new file mode 100644
index 00000000000..a725e80befa
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -0,0 +1,30 @@
+#
+# QE Communication options
+#
+
+menu "QE Options"
+	depends on QUICC_ENGINE
+
+config UCC_SLOW
+	bool "UCC Slow Protocols Support"
+	default n
+	select UCC
+	help
+	  This option provides qe_lib support to UCC slow
+	  protocols: UART, BISYNC, QMC
+
+config UCC_FAST
+	bool "UCC Fast Protocols Support"
+	default n
+	select UCC
+	select UCC_SLOW
+	help
+	  This option provides qe_lib support to UCC fast
+	  protocols: HDLC, Ethernet, ATM, transparent
+
+config UCC
+	bool
+	default y if UCC_FAST || UCC_SLOW
+
+endmenu
+
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
new file mode 100644
index 00000000000..874fe1a5b1c
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux ppc-specific parts of QE
+#
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
+
+obj-$(CONFIG_UCC)	+= ucc.o
+obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
+obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
new file mode 100644
index 00000000000..2bae632d3ad
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+static void qe_snums_init(void);
+static void qe_muram_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+
+/* QE snum state */
+enum qe_snum_state {
+	QE_SNUM_STATE_USED,
+	QE_SNUM_STATE_FREE
+};
+
+/* QE snum */
+struct qe_snum {
+	u8 num;
+	enum qe_snum_state state;
+};
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+struct qe_immap *qe_immr = NULL;
+EXPORT_SYMBOL(qe_immr);
+
+static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
+
+static phys_addr_t qebase = -1;
+
+phys_addr_t get_qe_base(void)
+{
+	struct device_node *qe;
+
+	if (qebase != -1)
+		return qebase;
+
+	qe = of_find_node_by_type(NULL, "qe");
+	if (qe) {
+		unsigned int size;
+		const void *prop = get_property(qe, "reg", &size);
+		qebase = of_translate_address(qe, prop);
+		of_node_put(qe);
+	};
+
+	return qebase;
+}
+
+EXPORT_SYMBOL(get_qe_base);
+
+void qe_reset(void)
+{
+	if (qe_immr == NULL)
+		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+	qe_snums_init();
+
+	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+		     QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+	/* Reclaim the MURAM memory for our use. */
+	qe_muram_init();
+
+	if (qe_sdma_init())
+		panic("sdma init failed!");
+}
+
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
+{
+	unsigned long flags;
+	u8 mcn_shift = 0, dev_shift = 0;
+
+	spin_lock_irqsave(&qe_lock, flags);
+	if (cmd == QE_RESET) {
+		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+	} else {
+		if (cmd == QE_ASSIGN_PAGE) {
+			/* Here device is the SNUM, not sub-block */
+			dev_shift = QE_CR_SNUM_SHIFT;
+		} else if (cmd == QE_ASSIGN_RISC) {
+			/* Here device is the SNUM, and mcnProtocol is
+			 * e_QeCmdRiscAssignment value */
+			dev_shift = QE_CR_SNUM_SHIFT;
+			mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+		} else {
+			if (device == QE_CR_SUBBLOCK_USB)
+				mcn_shift = QE_CR_MCN_USB_SHIFT;
+			else
+				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+		}
+
+		out_be32(&qe_immr->cp.cecdr,
+			 immrbar_virt_to_phys((void *)cmd_input));
+		out_be32(&qe_immr->cp.cecr,
+			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+			  mcn_protocol << mcn_shift));
+	}
+
+	/* wait for the QE_CR_FLG to clear */
+	while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
+		cpu_relax();
+	spin_unlock_irqrestore(&qe_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(qe_issue_cmd);
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int get_brg_clk(void)
+{
+	struct device_node *qe;
+	if (brg_clk)
+		return brg_clk;
+
+	qe = of_find_node_by_type(NULL, "qe");
+	if (qe) {
+		unsigned int size;
+		const u32 *prop = get_property(qe, "brg-frequency", &size);
+		brg_clk = *prop;
+		of_node_put(qe);
+	};
+	return brg_clk;
+}
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void qe_setbrg(u32 brg, u32 rate)
+{
+	volatile u32 *bp;
+	u32 divisor, tempval;
+	int div16 = 0;
+
+	bp = &qe_immr->brg.brgc1;
+	bp += brg;
+
+	divisor = (get_brg_clk() / rate);
+	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+		div16 = 1;
+		divisor /= 16;
+	}
+
+	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+	if (div16)
+		tempval |= QE_BRGC_DIV16;
+
+	out_be32(bp, tempval);
+}
+
+/* Initialize SNUMs (thread serial numbers) according to
+ * QE Module Control chapter, SNUM table
+ */
+static void qe_snums_init(void)
+{
+	int i;
+	static const u8 snum_init[] = {
+		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+		0xD8, 0xD9, 0xE8, 0xE9,
+	};
+
+	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+		snums[i].num = snum_init[i];
+		snums[i].state = QE_SNUM_STATE_FREE;
+	}
+}
+
+int qe_get_snum(void)
+{
+	unsigned long flags;
+	int snum = -EBUSY;
+	int i;
+
+	spin_lock_irqsave(&qe_lock, flags);
+	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+		if (snums[i].state == QE_SNUM_STATE_FREE) {
+			snums[i].state = QE_SNUM_STATE_USED;
+			snum = snums[i].num;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&qe_lock, flags);
+
+	return snum;
+}
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+	int i;
+
+	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+		if (snums[i].num == snum) {
+			snums[i].state = QE_SNUM_STATE_FREE;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+	struct sdma *sdma = &qe_immr->sdma;
+	u32 sdma_buf_offset;
+
+	if (!sdma)
+		return -ENODEV;
+
+	/* allocate 2 internal temporary buffers (512 bytes size each) for
+	 * the SDMA */
+	sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
+	if (IS_MURAM_ERR(sdma_buf_offset))
+		return -ENOMEM;
+
+	out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
+	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
+					QE_SDMR_CEN_SHIFT)));
+
+	return 0;
+}
+
+/*
+ * muram_alloc / muram_free bits.
+ */
+static DEFINE_SPINLOCK(qe_muram_lock);
+
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t qe_boot_muram_rh_block[16];
+static rh_info_t qe_muram_info;
+
+static void qe_muram_init(void)
+{
+	struct device_node *np;
+	u32 address;
+	u64 size;
+	unsigned int flags;
+
+	/* initialize the info header */
+	rh_init(&qe_muram_info, 1,
+		sizeof(qe_boot_muram_rh_block) /
+		sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
+
+	/* Attach the usable muram area */
+	/* XXX: This is a subset of the available muram. It
+	 * varies with the processor and the microcode patches activated.
+	 */
+	if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
+		address = *of_get_address(np, 0, &size, &flags);
+		of_node_put(np);
+		rh_attach_region(&qe_muram_info,
+			(void *)address, (int)size);
+	}
+}
+
+/* This function returns an index into the MURAM area.
+ */
+u32 qe_muram_alloc(u32 size, u32 align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_muram_lock, flags);
+	start = rh_alloc_align(&qe_muram_info, size, align, "QE");
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+	return (u32) start;
+}
+EXPORT_SYMBOL(qe_muram_alloc);
+
+int qe_muram_free(u32 offset)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_muram_lock, flags);
+	ret = rh_free(&qe_muram_info, (void *)offset);
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(qe_muram_free);
+
+/* not sure if this is ever needed */
+u32 qe_muram_alloc_fixed(u32 offset, u32 size)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_muram_lock, flags);
+	start = rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc");
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+	return (u32) start;
+}
+EXPORT_SYMBOL(qe_muram_alloc_fixed);
+
+void qe_muram_dump(void)
+{
+	rh_dump(&qe_muram_info);
+}
+EXPORT_SYMBOL(qe_muram_dump);
+
+void *qe_muram_addr(u32 offset)
+{
+	return (void *)&qe_immr->muram[offset];
+}
+EXPORT_SYMBOL(qe_muram_addr);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
new file mode 100644
index 00000000000..c229d07d495
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -0,0 +1,555 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.c
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc.  All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/qe_ic.h>
+
+#include "qe_ic.h"
+
+static DEFINE_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+	[1] = {
+	       .mask = 0x00008000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 0,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[2] = {
+	       .mask = 0x00004000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 1,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[3] = {
+	       .mask = 0x00002000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 2,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[10] = {
+		.mask = 0x00000040,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[11] = {
+		.mask = 0x00000020,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[12] = {
+		.mask = 0x00000010,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[13] = {
+		.mask = 0x00000008,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 4,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[14] = {
+		.mask = 0x00000004,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 5,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[15] = {
+		.mask = 0x00000002,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 6,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[20] = {
+		.mask = 0x10000000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPRTA,
+		},
+	[25] = {
+		.mask = 0x00800000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[26] = {
+		.mask = 0x00400000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[27] = {
+		.mask = 0x00200000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[28] = {
+		.mask = 0x00100000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[32] = {
+		.mask = 0x80000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[33] = {
+		.mask = 0x40000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[34] = {
+		.mask = 0x20000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[35] = {
+		.mask = 0x10000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[36] = {
+		.mask = 0x08000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 4,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[40] = {
+		.mask = 0x00800000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[41] = {
+		.mask = 0x00400000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[42] = {
+		.mask = 0x00200000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[43] = {
+		.mask = 0x00100000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPYCC,
+		},
+};
+
+static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
+{
+	return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
+			       u32 value)
+{
+	out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+	return irq_desc[virq].chip_data;
+}
+
+#define virq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
+
+static void qe_ic_unmask_irq(unsigned int virq)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	unsigned long flags;
+	u32 temp;
+
+	spin_lock_irqsave(&qe_ic_lock, flags);
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+		    temp | qe_ic_info[src].mask);
+
+	spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(unsigned int virq)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	unsigned long flags;
+	u32 temp;
+
+	spin_lock_irqsave(&qe_ic_lock, flags);
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+		    temp & ~qe_ic_info[src].mask);
+
+	spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq_and_ack(unsigned int virq)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	unsigned long flags;
+	u32 temp;
+
+	spin_lock_irqsave(&qe_ic_lock, flags);
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+		    temp & ~qe_ic_info[src].mask);
+
+	/* There is nothing to do for ack here, ack is handled in ISR */
+
+	spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+	.typename = " QEIC  ",
+	.unmask = qe_ic_unmask_irq,
+	.mask = qe_ic_mask_irq,
+	.mask_ack = qe_ic_mask_irq_and_ack,
+};
+
+static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
+{
+	struct qe_ic *qe_ic = h->host_data;
+
+	/* Exact match, unless qe_ic node is NULL */
+	return qe_ic->of_node == NULL || qe_ic->of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	struct qe_ic *qe_ic = h->host_data;
+	struct irq_chip *chip;
+
+	if (qe_ic_info[hw].mask == 0) {
+		printk(KERN_ERR "Can't map reserved IRQ \n");
+		return -EINVAL;
+	}
+	/* Default chip */
+	chip = &qe_ic->hc_irq;
+
+	set_irq_chip_data(virq, qe_ic);
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+
+	set_irq_chip_and_handler(virq, chip, handle_level_irq);
+
+	return 0;
+}
+
+static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct,
+			    u32 * intspec, unsigned int intsize,
+			    irq_hw_number_t * out_hwirq,
+			    unsigned int *out_flags)
+{
+	*out_hwirq = intspec[0];
+	if (intsize > 1)
+		*out_flags = intspec[1];
+	else
+		*out_flags = IRQ_TYPE_NONE;
+	return 0;
+}
+
+static struct irq_host_ops qe_ic_host_ops = {
+	.match = qe_ic_host_match,
+	.map = qe_ic_host_map,
+	.xlate = qe_ic_host_xlate,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
+{
+	int irq;
+
+	BUG_ON(qe_ic == NULL);
+
+	/* get the interrupt source vector. */
+	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+	if (irq == 0)
+		return NO_IRQ;
+
+	return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
+{
+	int irq;
+
+	BUG_ON(qe_ic == NULL);
+
+	/* get the interrupt source vector. */
+	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+	if (irq == 0)
+		return NO_IRQ;
+
+	return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* FIXME: We mask all the QE Low interrupts while handling.  We should
+ * let other interrupt come in, but BAD interrupts are generated */
+void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc,
+				struct pt_regs *regs)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	struct irq_chip *chip = irq_desc[irq].chip;
+
+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic, regs);
+
+	chip->mask_ack(irq);
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	chip->unmask(irq);
+}
+
+/* FIXME: We mask all the QE High interrupts while handling.  We should
+ * let other interrupt come in, but BAD interrupts are generated */
+void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc,
+				 struct pt_regs *regs)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	struct irq_chip *chip = irq_desc[irq].chip;
+
+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic, regs);
+
+	chip->mask_ack(irq);
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	chip->unmask(irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags)
+{
+	struct qe_ic *qe_ic;
+	struct resource res;
+	u32 temp = 0, ret, high_active = 0;
+
+	qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+	if (qe_ic == NULL)
+		return;
+
+	memset(qe_ic, 0, sizeof(struct qe_ic));
+	qe_ic->of_node = node ? of_node_get(node) : NULL;
+
+	qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
+					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
+	if (qe_ic->irqhost == NULL) {
+		of_node_put(node);
+		return;
+	}
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return;
+
+	qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
+
+	qe_ic->irqhost->host_data = qe_ic;
+	qe_ic->hc_irq = qe_ic_irq_chip;
+
+	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+	if (qe_ic->virq_low == NO_IRQ) {
+		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+		return;
+	}
+
+	/* default priority scheme is grouped. If spread mode is    */
+	/* required, configure cicr accordingly.                    */
+	if (flags & QE_IC_SPREADMODE_GRP_W)
+		temp |= CICR_GWCC;
+	if (flags & QE_IC_SPREADMODE_GRP_X)
+		temp |= CICR_GXCC;
+	if (flags & QE_IC_SPREADMODE_GRP_Y)
+		temp |= CICR_GYCC;
+	if (flags & QE_IC_SPREADMODE_GRP_Z)
+		temp |= CICR_GZCC;
+	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+		temp |= CICR_GRTA;
+	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+		temp |= CICR_GRTB;
+
+	/* choose destination signal for highest priority interrupt */
+	if (flags & QE_IC_HIGH_SIGNAL) {
+		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+		high_active = 1;
+	}
+
+	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+	set_irq_data(qe_ic->virq_low, qe_ic);
+	set_irq_chained_handler(qe_ic->virq_low, qe_ic_cascade_low);
+
+	if (qe_ic->virq_high != NO_IRQ) {
+		set_irq_data(qe_ic->virq_high, qe_ic);
+		set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
+	}
+
+	printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp = 0;
+
+	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+	temp &= ~CICR_HP_MASK;
+	temp |= src << CICR_HP_SHIFT;
+
+	temp &= ~CICR_HPIT_MASK;
+	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp;
+
+	if (priority > 8 || priority == 0)
+		return -EINVAL;
+	if (src > 127)
+		return -EINVAL;
+	if (qe_ic_info[src].pri_reg == 0)
+		return -EINVAL;
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+	if (priority < 4) {
+		temp &= ~(0x7 << (32 - priority * 3));
+		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+	} else {
+		temp &= ~(0x7 << (24 - priority * 3));
+		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+	}
+
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+	return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+	if (priority > 2 || priority == 0)
+		return -EINVAL;
+
+	switch (qe_ic_info[src].pri_reg) {
+	case QEIC_CIPZCC:
+		shift = CICNR_ZCC1T_SHIFT;
+		break;
+	case QEIC_CIPWCC:
+		shift = CICNR_WCC1T_SHIFT;
+		break;
+	case QEIC_CIPYCC:
+		shift = CICNR_YCC1T_SHIFT;
+		break;
+	case QEIC_CIPXCC:
+		shift = CICNR_XCC1T_SHIFT;
+		break;
+	case QEIC_CIPRTA:
+		shift = CRICR_RTA1T_SHIFT;
+		control_reg = QEIC_CRICR;
+		break;
+	case QEIC_CIPRTB:
+		shift = CRICR_RTB1T_SHIFT;
+		control_reg = QEIC_CRICR;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	shift += (2 - priority) * 2;
+	temp = qe_ic_read(qe_ic->regs, control_reg);
+	temp &= ~(SIGNAL_MASK << shift);
+	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+	qe_ic_write(qe_ic->regs, control_reg, temp);
+
+	return 0;
+}
+
+static struct sysdev_class qe_ic_sysclass = {
+	set_kset_name("qe_ic"),
+};
+
+static struct sys_device device_qe_ic = {
+	.id = 0,
+	.cls = &qe_ic_sysclass,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+	int rc;
+
+	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+	rc = sysdev_class_register(&qe_ic_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering qe_ic sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&device_qe_ic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering qe_ic sys device\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h
new file mode 100644
index 00000000000..9a631adb189
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.h
@@ -0,0 +1,106 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.h
+ *
+ * QUICC ENGINE Interrupt Controller Header
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _POWERPC_SYSDEV_QE_IC_H
+#define _POWERPC_SYSDEV_QE_IC_H
+
+#include <asm/qe_ic.h>
+
+#define NR_QE_IC_INTS		64
+
+/* QE IC registers offset */
+#define QEIC_CICR		0x00
+#define QEIC_CIVEC		0x04
+#define QEIC_CRIPNR		0x08
+#define QEIC_CIPNR		0x0c
+#define QEIC_CIPXCC		0x10
+#define QEIC_CIPYCC		0x14
+#define QEIC_CIPWCC		0x18
+#define QEIC_CIPZCC		0x1c
+#define QEIC_CIMR		0x20
+#define QEIC_CRIMR		0x24
+#define QEIC_CICNR		0x28
+#define QEIC_CIPRTA		0x30
+#define QEIC_CIPRTB		0x34
+#define QEIC_CRICR		0x3c
+#define QEIC_CHIVEC		0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0	29
+#define CIPCC_SHIFT_PRI1	26
+#define CIPCC_SHIFT_PRI2	23
+#define CIPCC_SHIFT_PRI3	20
+#define CIPCC_SHIFT_PRI4	13
+#define CIPCC_SHIFT_PRI5	10
+#define CIPCC_SHIFT_PRI6	7
+#define CIPCC_SHIFT_PRI7	4
+
+/* CICR priority modes */
+#define CICR_GWCC		0x00040000
+#define CICR_GXCC		0x00020000
+#define CICR_GYCC		0x00010000
+#define CICR_GZCC		0x00080000
+#define CICR_GRTA		0x00200000
+#define CICR_GRTB		0x00400000
+#define CICR_HPIT_SHIFT		8
+#define CICR_HPIT_MASK		0x00000300
+#define CICR_HP_SHIFT		24
+#define CICR_HP_MASK		0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT	20
+#define CICNR_ZCC1T_SHIFT	28
+#define CICNR_YCC1T_SHIFT	12
+#define CICNR_XCC1T_SHIFT	4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT	20
+#define CRICR_RTB1T_SHIFT	28
+
+/* Signal indicator */
+#define SIGNAL_MASK		3
+#define SIGNAL_HIGH		2
+#define SIGNAL_LOW		0
+
+struct qe_ic {
+	/* Control registers offset */
+	volatile u32 __iomem *regs;
+
+	/* The remapper for this QEIC */
+	struct irq_host *irqhost;
+
+	/* The "linux" controller struct */
+	struct irq_chip hc_irq;
+
+	/* The device node of the interrupt controller */
+	struct device_node *of_node;
+
+	/* VIRQ numbers of QE high/low irqs */
+	unsigned int virq_high;
+	unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+	u32	mask;	  /* location of this source at the QIMR register. */
+	u32	mask_reg; /* Mask register offset */
+	u8	pri_code; /* for grouped interrupts sources - the interrupt
+			     code as appears at the group priority register */
+	u32	pri_reg;  /* Group priority register offset */
+};
+
+#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
new file mode 100644
index 00000000000..aea43597038
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -0,0 +1,226 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_io.c
+ *
+ * QE Parallel I/O ports configuration routines
+ *
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#undef DEBUG
+
+#define NUM_OF_PINS	32
+
+struct port_regs {
+	__be32	cpodr;		/* Open drain register */
+	__be32	cpdata;		/* Data register */
+	__be32	cpdir1;		/* Direction register */
+	__be32	cpdir2;		/* Direction register */
+	__be32	cppar1;		/* Pin assignment register */
+	__be32	cppar2;		/* Pin assignment register */
+};
+
+static struct port_regs *par_io = NULL;
+static int num_par_io_ports = 0;
+
+int par_io_init(struct device_node *np)
+{
+	struct resource res;
+	int ret;
+	const u32 *num_ports;
+
+	/* Map Parallel I/O ports registers */
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
+	par_io = ioremap(res.start, res.end - res.start + 1);
+
+	num_ports = get_property(np, "num-ports", NULL);
+	if (num_ports)
+		num_par_io_ports = *num_ports;
+
+	return 0;
+}
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+		      int assignment, int has_irq)
+{
+	u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val;
+
+	if (!par_io)
+		return -1;
+
+	/* calculate pin location for single and 2 bits information */
+	pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
+
+	/* Set open drain, if required */
+	tmp_val = in_be32(&par_io[port].cpodr);
+	if (open_drain)
+		out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val);
+	else
+		out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val);
+
+	/* define direction */
+	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+		in_be32(&par_io[port].cpdir2) :
+		in_be32(&par_io[port].cpdir1);
+
+	/* get all bits mask for 2 bit per port */
+	pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS -
+				(pin % (NUM_OF_PINS / 2) + 1) * 2));
+
+	/* Get the final mask we need for the right definition */
+	new_mask2bits = (u32) (dir << (NUM_OF_PINS -
+				(pin % (NUM_OF_PINS / 2) + 1) * 2));
+
+	/* clear and set 2 bits mask */
+	if (pin > (NUM_OF_PINS / 2) - 1) {
+		out_be32(&par_io[port].cpdir2,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val);
+	} else {
+		out_be32(&par_io[port].cpdir1,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val);
+	}
+	/* define pin assignment */
+	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+		in_be32(&par_io[port].cppar2) :
+		in_be32(&par_io[port].cppar1);
+
+	new_mask2bits = (u32) (assignment << (NUM_OF_PINS -
+			(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	/* clear and set 2 bits mask */
+	if (pin > (NUM_OF_PINS / 2) - 1) {
+		out_be32(&par_io[port].cppar2,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val);
+	} else {
+		out_be32(&par_io[port].cppar1,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(par_io_config_pin);
+
+int par_io_data_set(u8 port, u8 pin, u8 val)
+{
+	u32 pin_mask, tmp_val;
+
+	if (port >= num_par_io_ports)
+		return -EINVAL;
+	if (pin >= NUM_OF_PINS)
+		return -EINVAL;
+	/* calculate pin location */
+	pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin));
+
+	tmp_val = in_be32(&par_io[port].cpdata);
+
+	if (val == 0)		/* clear */
+		out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+	else			/* set */
+		out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+
+	return 0;
+}
+EXPORT_SYMBOL(par_io_data_set);
+
+int par_io_of_config(struct device_node *np)
+{
+	struct device_node *pio;
+	const phandle *ph;
+	int pio_map_len;
+	const unsigned int *pio_map;
+
+	if (par_io == NULL) {
+		printk(KERN_ERR "par_io not initialized \n");
+		return -1;
+	}
+
+	ph = get_property(np, "pio-handle", NULL);
+	if (ph == 0) {
+		printk(KERN_ERR "pio-handle not available \n");
+		return -1;
+	}
+
+	pio = of_find_node_by_phandle(*ph);
+
+	pio_map = get_property(pio, "pio-map", &pio_map_len);
+	if (pio_map == NULL) {
+		printk(KERN_ERR "pio-map is not set! \n");
+		return -1;
+	}
+	pio_map_len /= sizeof(unsigned int);
+	if ((pio_map_len % 6) != 0) {
+		printk(KERN_ERR "pio-map format wrong! \n");
+		return -1;
+	}
+
+	while (pio_map_len > 0) {
+		par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
+				(int) pio_map[2], (int) pio_map[3],
+				(int) pio_map[4], (int) pio_map[5]);
+		pio_map += 6;
+		pio_map_len -= 6;
+	}
+	of_node_put(pio);
+	return 0;
+}
+EXPORT_SYMBOL(par_io_of_config);
+
+#ifdef DEBUG
+static void dump_par_io(void)
+{
+	int i;
+
+	printk(KERN_INFO "PAR IO registars:\n");
+	printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+	for (i = 0; i < num_par_io_ports; i++) {
+		printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
+		       i, (u32) & par_io[i].cpodr,
+		       in_be32(&par_io[i].cpodr));
+		printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
+		       i, (u32) & par_io[i].cpdata,
+		       in_be32(&par_io[i].cpdata));
+		printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
+		       i, (u32) & par_io[i].cpdir1,
+		       in_be32(&par_io[i].cpdir1));
+		printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
+		       i, (u32) & par_io[i].cpdir2,
+		       in_be32(&par_io[i].cpdir2));
+		printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
+		       i, (u32) & par_io[i].cppar1,
+		       in_be32(&par_io[i].cppar1));
+		printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
+		       i, (u32) & par_io[i].cppar2,
+		       in_be32(&par_io[i].cppar2));
+	}
+
+}
+EXPORT_SYMBOL(dump_par_io);
+#endif /* DEBUG */
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
new file mode 100644
index 00000000000..916c9e5df57
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -0,0 +1,251 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc.c
+ *
+ * QE UCC API Set - UCC specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/ucc.h>
+
+static DEFINE_SPINLOCK(ucc_lock);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ucc_lock, flags);
+	out_be32(&qe_immr->qmx.cmxgcr,
+		 ((in_be32(&qe_immr->qmx.cmxgcr) &
+		   ~QE_CMXGCR_MII_ENET_MNG) |
+		  (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+	spin_unlock_irqrestore(&ucc_lock, flags);
+
+	return 0;
+}
+
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+		 enum ucc_speed_type speed)
+{
+	u8 guemr = 0;
+
+	/* check if the UCC number is in range. */
+	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+		return -EINVAL;
+
+	guemr = regs->guemr;
+	guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
+	switch (speed) {
+	case UCC_SPEED_TYPE_SLOW:
+		guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
+		break;
+	case UCC_SPEED_TYPE_FAST:
+		guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
+		break;
+	default:
+		return -EINVAL;
+	}
+	regs->guemr = guemr;
+
+	return 0;
+}
+
+int ucc_init_guemr(struct ucc_common *regs)
+{
+	u8 guemr = 0;
+
+	if (!regs)
+		return -EINVAL;
+
+	/* Set bit 3 (which is reserved in the GUEMR register) to 1 */
+	guemr = UCC_GUEMR_SET_RESERVED3;
+
+	regs->guemr = guemr;
+
+	return 0;
+}
+
+static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
+			   u8 * shift)
+{
+	switch (ucc_num) {
+	case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+		*reg_num = 1;
+		*shift = 16;
+		break;
+	case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+		*reg_num = 1;
+		*shift = 0;
+		break;
+	case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+		*reg_num = 2;
+		*shift = 16;
+		break;
+	case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+		*reg_num = 2;
+		*shift = 0;
+		break;
+	case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+		*reg_num = 3;
+		*shift = 16;
+		break;
+	case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+		*reg_num = 3;
+		*shift = 0;
+		break;
+	case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+		*reg_num = 4;
+		*shift = 16;
+		break;
+	case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+		*reg_num = 4;
+		*shift = 0;
+		break;
+	default:
+		break;
+	}
+}
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+{
+	volatile u32 *p_cmxucr;
+	u8 reg_num;
+	u8 shift;
+
+	/* check if the UCC number is in range. */
+	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+		return -EINVAL;
+
+	get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+
+	if (set)
+		out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+	else
+		out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+
+	return 0;
+}
+
+int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
+{
+	volatile u32 *p_cmxucr;
+	u8 reg_num;
+	u8 shift;
+	u32 clock_bits;
+	u32 clock_mask;
+	int source = -1;
+
+	/* check if the UCC number is in range. */
+	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+		return -EINVAL;
+
+	if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
+		printk(KERN_ERR
+		       "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+		return -EINVAL;
+	}
+
+	get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+
+	switch (reg_num) {
+	case 1:
+		switch (clock) {
+		case QE_BRG1:	source = 1; break;
+		case QE_BRG2:	source = 2; break;
+		case QE_BRG7:	source = 3; break;
+		case QE_BRG8:	source = 4; break;
+		case QE_CLK9:	source = 5; break;
+		case QE_CLK10:	source = 6; break;
+		case QE_CLK11:	source = 7; break;
+		case QE_CLK12:	source = 8; break;
+		case QE_CLK15:	source = 9; break;
+		case QE_CLK16:	source = 10; break;
+		default: 	source = -1; break;
+		}
+		break;
+	case 2:
+		switch (clock) {
+		case QE_BRG5:	source = 1; break;
+		case QE_BRG6:	source = 2; break;
+		case QE_BRG7:	source = 3; break;
+		case QE_BRG8:	source = 4; break;
+		case QE_CLK13:	source = 5; break;
+		case QE_CLK14:	source = 6; break;
+		case QE_CLK19:	source = 7; break;
+		case QE_CLK20:	source = 8; break;
+		case QE_CLK15:	source = 9; break;
+		case QE_CLK16:	source = 10; break;
+		default: 	source = -1; break;
+		}
+		break;
+	case 3:
+		switch (clock) {
+		case QE_BRG9:	source = 1; break;
+		case QE_BRG10:	source = 2; break;
+		case QE_BRG15:	source = 3; break;
+		case QE_BRG16:	source = 4; break;
+		case QE_CLK3:	source = 5; break;
+		case QE_CLK4:	source = 6; break;
+		case QE_CLK17:	source = 7; break;
+		case QE_CLK18:	source = 8; break;
+		case QE_CLK7:	source = 9; break;
+		case QE_CLK8:	source = 10; break;
+		default:	source = -1; break;
+		}
+		break;
+	case 4:
+		switch (clock) {
+		case QE_BRG13:	source = 1; break;
+		case QE_BRG14:	source = 2; break;
+		case QE_BRG15:	source = 3; break;
+		case QE_BRG16:	source = 4; break;
+		case QE_CLK5:	source = 5; break;
+		case QE_CLK6:	source = 6; break;
+		case QE_CLK21:	source = 7; break;
+		case QE_CLK22:	source = 8; break;
+		case QE_CLK7:	source = 9; break;
+		case QE_CLK8:	source = 10; break;
+		default: 	source = -1; break;
+		}
+		break;
+	default:
+		source = -1;
+		break;
+	}
+
+	if (source == -1) {
+		printk(KERN_ERR
+		     "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+		return -ENOENT;
+	}
+
+	clock_bits = (u32) source;
+	clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
+	if (mode == COMM_DIR_RX) {
+		clock_bits <<= 4;  /* Rx field is 4 bits to left of Tx field */
+		clock_mask <<= 4;  /* Rx field is 4 bits to left of Tx field */
+	}
+	clock_bits <<= shift;
+	clock_mask <<= shift;
+
+	out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits);
+
+	return 0;
+}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
new file mode 100644
index 00000000000..c2be7348fcb
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -0,0 +1,396 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc_fast.c
+ *
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_fast.h>
+
+#define uccf_printk(level, format, arg...) \
+	printk(level format "\n", ## arg)
+
+#define uccf_dbg(format, arg...) \
+	uccf_printk(KERN_DEBUG , format , ## arg)
+#define uccf_err(format, arg...) \
+	uccf_printk(KERN_ERR , format , ## arg)
+#define uccf_info(format, arg...) \
+	uccf_printk(KERN_INFO , format , ## arg)
+#define uccf_warn(format, arg...) \
+	uccf_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCF_VERBOSE_DEBUG
+#define uccf_vdbg uccf_dbg
+#else
+#define uccf_vdbg(fmt, args...) do { } while (0)
+#endif				/* UCCF_VERBOSE_DEBUG */
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
+{
+	uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
+	uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
+
+	uccf_info("gumr  : addr - 0x%08x, val - 0x%08x",
+		  (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+	uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
+		  (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+	uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+	uccf_info("udsr  : addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+	uccf_info("ucce  : addr - 0x%08x, val - 0x%08x",
+		  (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+	uccf_info("uccm  : addr - 0x%08x, val - 0x%08x",
+		  (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+	uccf_info("uccs  : addr - 0x%08x, val - 0x%02x",
+		  (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+	uccf_info("urfb  : addr - 0x%08x, val - 0x%08x",
+		  (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+	uccf_info("urfs  : addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+	uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+	uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->urfset,
+		  in_be16(&uccf->uf_regs->urfset));
+	uccf_info("utfb  : addr - 0x%08x, val - 0x%08x",
+		  (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+	uccf_info("utfs  : addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+	uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+	uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+	uccf_info("utpt  : addr - 0x%08x, val - 0x%04x",
+		  (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+	uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
+		  (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+	uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
+		  (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+}
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
+{
+	switch (uccf_num) {
+	case 0:	return QE_CR_SUBBLOCK_UCCFAST1;
+	case 1: return QE_CR_SUBBLOCK_UCCFAST2;
+	case 2: return QE_CR_SUBBLOCK_UCCFAST3;
+	case 3: return QE_CR_SUBBLOCK_UCCFAST4;
+	case 4: return QE_CR_SUBBLOCK_UCCFAST5;
+	case 5: return QE_CR_SUBBLOCK_UCCFAST6;
+	case 6: return QE_CR_SUBBLOCK_UCCFAST7;
+	case 7:	return QE_CR_SUBBLOCK_UCCFAST8;
+	default: return QE_CR_SUBBLOCK_INVALID;
+	}
+}
+
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
+{
+	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+	struct ucc_fast *uf_regs;
+	u32 gumr;
+
+	uf_regs = uccf->uf_regs;
+
+	/* Enable reception and/or transmission on this UCC. */
+	gumr = in_be32(&uf_regs->gumr);
+	if (mode & COMM_DIR_TX) {
+		gumr |= UCC_FAST_GUMR_ENT;
+		uccf->enabled_tx = 1;
+	}
+	if (mode & COMM_DIR_RX) {
+		gumr |= UCC_FAST_GUMR_ENR;
+		uccf->enabled_rx = 1;
+	}
+	out_be32(&uf_regs->gumr, gumr);
+}
+
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+	struct ucc_fast *uf_regs;
+	u32 gumr;
+
+	uf_regs = uccf->uf_regs;
+
+	/* Disable reception and/or transmission on this UCC. */
+	gumr = in_be32(&uf_regs->gumr);
+	if (mode & COMM_DIR_TX) {
+		gumr &= ~UCC_FAST_GUMR_ENT;
+		uccf->enabled_tx = 0;
+	}
+	if (mode & COMM_DIR_RX) {
+		gumr &= ~UCC_FAST_GUMR_ENR;
+		uccf->enabled_rx = 0;
+	}
+	out_be32(&uf_regs->gumr, gumr);
+}
+
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
+{
+	struct ucc_fast_private *uccf;
+	struct ucc_fast *uf_regs;
+	u32 gumr = 0;
+	int ret;
+
+	uccf_vdbg("%s: IN", __FUNCTION__);
+
+	if (!uf_info)
+		return -EINVAL;
+
+	/* check if the UCC port number is in range. */
+	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+		uccf_err("ucc_fast_init: Illagal UCC number!");
+		return -EINVAL;
+	}
+
+	/* Check that 'max_rx_buf_length' is properly aligned (4). */
+	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+		uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
+		return -EINVAL;
+	}
+
+	/* Validate Virtual Fifo register values */
+	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+		uccf_err
+		    ("ucc_fast_init: Virtual Fifo register urfs too small.");
+		return -EINVAL;
+	}
+
+	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		uccf_err
+		    ("ucc_fast_init: Virtual Fifo register urfs not aligned.");
+		return -EINVAL;
+	}
+
+	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		uccf_err
+		    ("ucc_fast_init: Virtual Fifo register urfet not aligned.");
+		return -EINVAL;
+	}
+
+	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		uccf_err
+		   ("ucc_fast_init: Virtual Fifo register urfset not aligned.");
+		return -EINVAL;
+	}
+
+	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		uccf_err
+		    ("ucc_fast_init: Virtual Fifo register utfs not aligned.");
+		return -EINVAL;
+	}
+
+	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		uccf_err
+		    ("ucc_fast_init: Virtual Fifo register utfet not aligned.");
+		return -EINVAL;
+	}
+
+	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		uccf_err
+		    ("ucc_fast_init: Virtual Fifo register utftt not aligned.");
+		return -EINVAL;
+	}
+
+	uccf = (struct ucc_fast_private *)
+		 kmalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
+	if (!uccf) {
+		uccf_err
+		    ("ucc_fast_init: No memory for UCC slow data structure!");
+		return -ENOMEM;
+	}
+	memset(uccf, 0, sizeof(struct ucc_fast_private));
+
+	/* Fill fast UCC structure */
+	uccf->uf_info = uf_info;
+	/* Set the PHY base address */
+	uccf->uf_regs =
+	    (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast));
+	if (uccf->uf_regs == NULL) {
+		uccf_err
+		    ("ucc_fast_init: No memory map for UCC slow controller!");
+		return -ENOMEM;
+	}
+
+	uccf->enabled_tx = 0;
+	uccf->enabled_rx = 0;
+	uccf->stopped_tx = 0;
+	uccf->stopped_rx = 0;
+	uf_regs = uccf->uf_regs;
+	uccf->p_ucce = (u32 *) & (uf_regs->ucce);
+	uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+#ifdef STATISTICS
+	uccf->tx_frames = 0;
+	uccf->rx_frames = 0;
+	uccf->rx_discarded = 0;
+#endif				/* STATISTICS */
+
+	/* Init Guemr register */
+	if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
+		uccf_err("ucc_fast_init: Could not init the guemr register.");
+		ucc_fast_free(uccf);
+		return ret;
+	}
+
+	/* Set UCC to fast type */
+	if ((ret = ucc_set_type(uf_info->ucc_num,
+				(struct ucc_common *) (uf_regs),
+				UCC_SPEED_TYPE_FAST))) {
+		uccf_err("ucc_fast_init: Could not set type to fast.");
+		ucc_fast_free(uccf);
+		return ret;
+	}
+
+	uccf->mrblr = uf_info->max_rx_buf_length;
+
+	/* Set GUMR */
+	/* For more details see the hardware spec. */
+	/* gumr starts as zero. */
+	if (uf_info->tci)
+		gumr |= UCC_FAST_GUMR_TCI;
+	gumr |= uf_info->ttx_trx;
+	if (uf_info->cdp)
+		gumr |= UCC_FAST_GUMR_CDP;
+	if (uf_info->ctsp)
+		gumr |= UCC_FAST_GUMR_CTSP;
+	if (uf_info->cds)
+		gumr |= UCC_FAST_GUMR_CDS;
+	if (uf_info->ctss)
+		gumr |= UCC_FAST_GUMR_CTSS;
+	if (uf_info->txsy)
+		gumr |= UCC_FAST_GUMR_TXSY;
+	if (uf_info->rsyn)
+		gumr |= UCC_FAST_GUMR_RSYN;
+	gumr |= uf_info->synl;
+	if (uf_info->rtsm)
+		gumr |= UCC_FAST_GUMR_RTSM;
+	gumr |= uf_info->renc;
+	if (uf_info->revd)
+		gumr |= UCC_FAST_GUMR_REVD;
+	gumr |= uf_info->tenc;
+	gumr |= uf_info->tcrc;
+	gumr |= uf_info->mode;
+	out_be32(&uf_regs->gumr, gumr);
+
+	/* Allocate memory for Tx Virtual Fifo */
+	uccf->ucc_fast_tx_virtual_fifo_base_offset =
+	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+	if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+		uccf_err
+		    ("ucc_fast_init: Can not allocate MURAM memory for "
+			"struct ucc_fastx_virtual_fifo_base_offset.");
+		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+		ucc_fast_free(uccf);
+		return -ENOMEM;
+	}
+
+	/* Allocate memory for Rx Virtual Fifo */
+	uccf->ucc_fast_rx_virtual_fifo_base_offset =
+	    qe_muram_alloc(uf_info->urfs +
+			   (u32)
+			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
+			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+	if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+		uccf_err
+		    ("ucc_fast_init: Can not allocate MURAM memory for "
+			"ucc_fast_rx_virtual_fifo_base_offset.");
+		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+		ucc_fast_free(uccf);
+		return -ENOMEM;
+	}
+
+	/* Set Virtual Fifo registers */
+	out_be16(&uf_regs->urfs, uf_info->urfs);
+	out_be16(&uf_regs->urfet, uf_info->urfet);
+	out_be16(&uf_regs->urfset, uf_info->urfset);
+	out_be16(&uf_regs->utfs, uf_info->utfs);
+	out_be16(&uf_regs->utfet, uf_info->utfet);
+	out_be16(&uf_regs->utftt, uf_info->utftt);
+	/* utfb, urfb are offsets from MURAM base */
+	out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
+	out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+	/* Mux clocking */
+	/* Grant Support */
+	ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
+	/* Breakpoint Support */
+	ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
+	/* Set Tsa or NMSI mode. */
+	ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
+	/* If NMSI (not Tsa), set Tx and Rx clock. */
+	if (!uf_info->tsa) {
+		/* Rx clock routing */
+		if (uf_info->rx_clock != QE_CLK_NONE) {
+			if (ucc_set_qe_mux_rxtx
+			    (uf_info->ucc_num, uf_info->rx_clock,
+			     COMM_DIR_RX)) {
+				uccf_err
+		("ucc_fast_init: Illegal value for parameter 'RxClock'.");
+				ucc_fast_free(uccf);
+				return -EINVAL;
+			}
+		}
+		/* Tx clock routing */
+		if (uf_info->tx_clock != QE_CLK_NONE) {
+			if (ucc_set_qe_mux_rxtx
+			    (uf_info->ucc_num, uf_info->tx_clock,
+			     COMM_DIR_TX)) {
+				uccf_err
+		("ucc_fast_init: Illegal value for parameter 'TxClock'.");
+				ucc_fast_free(uccf);
+				return -EINVAL;
+			}
+		}
+	}
+
+	/* Set interrupt mask register at UCC level. */
+	out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+
+	/* First, clear anything pending at UCC level,
+	 * otherwise, old garbage may come through
+	 * as soon as the dam is opened
+	 * Writing '1' clears
+	 */
+	out_be32(&uf_regs->ucce, 0xffffffff);
+
+	*uccf_ret = uccf;
+	return 0;
+}
+
+void ucc_fast_free(struct ucc_fast_private * uccf)
+{
+	if (!uccf)
+		return;
+
+	if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
+		qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+
+	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
+		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+	kfree(uccf);
+}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
new file mode 100644
index 00000000000..1fb88ef7cf0
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Slow API Set - UCC Slow specific routines implementations.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_slow.h>
+
+#define uccs_printk(level, format, arg...) \
+        printk(level format "\n", ## arg)
+
+#define uccs_dbg(format, arg...) \
+	uccs_printk(KERN_DEBUG , format , ## arg)
+#define uccs_err(format, arg...) \
+	uccs_printk(KERN_ERR , format , ## arg)
+#define uccs_info(format, arg...) \
+	uccs_printk(KERN_INFO , format , ## arg)
+#define uccs_warn(format, arg...) \
+	uccs_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCS_VERBOSE_DEBUG
+#define uccs_vdbg uccs_dbg
+#else
+#define uccs_vdbg(fmt, args...) do { } while (0)
+#endif				/* UCCS_VERBOSE_DEBUG */
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
+{
+	switch (uccs_num) {
+	case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
+	case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
+	case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
+	case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
+	case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
+	case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
+	case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
+	case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
+	default: return QE_CR_SUBBLOCK_INVALID;
+	}
+}
+
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
+{
+	out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
+}
+
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
+{
+	struct ucc_slow_info *us_info = uccs->us_info;
+	u32 id;
+
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
+			 QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
+{
+	struct ucc_slow_info *us_info = uccs->us_info;
+	u32 id;
+
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
+{
+	struct ucc_slow_info *us_info = uccs->us_info;
+	u32 id;
+
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+	struct ucc_slow *us_regs;
+	u32 gumr_l;
+
+	us_regs = uccs->us_regs;
+
+	/* Enable reception and/or transmission on this UCC. */
+	gumr_l = in_be32(&us_regs->gumr_l);
+	if (mode & COMM_DIR_TX) {
+		gumr_l |= UCC_SLOW_GUMR_L_ENT;
+		uccs->enabled_tx = 1;
+	}
+	if (mode & COMM_DIR_RX) {
+		gumr_l |= UCC_SLOW_GUMR_L_ENR;
+		uccs->enabled_rx = 1;
+	}
+	out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+	struct ucc_slow *us_regs;
+	u32 gumr_l;
+
+	us_regs = uccs->us_regs;
+
+	/* Disable reception and/or transmission on this UCC. */
+	gumr_l = in_be32(&us_regs->gumr_l);
+	if (mode & COMM_DIR_TX) {
+		gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
+		uccs->enabled_tx = 0;
+	}
+	if (mode & COMM_DIR_RX) {
+		gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
+		uccs->enabled_rx = 0;
+	}
+	out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
+{
+	u32 i;
+	struct ucc_slow *us_regs;
+	u32 gumr;
+	u8 function_code = 0;
+	u8 *bd;
+	struct ucc_slow_private *uccs;
+	u32 id;
+	u32 command;
+	int ret;
+
+	uccs_vdbg("%s: IN", __FUNCTION__);
+
+	if (!us_info)
+		return -EINVAL;
+
+	/* check if the UCC port number is in range. */
+	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+		uccs_err("ucc_slow_init: Illagal UCC number!");
+		return -EINVAL;
+	}
+
+	/*
+	 * Set mrblr
+	 * Check that 'max_rx_buf_length' is properly aligned (4), unless
+ 	 * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+	 * case when QE accepts 32 bits at a time.
+	 */
+	if ((!us_info->rfw) &&
+		(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
+		uccs_err("max_rx_buf_length not aligned.");
+		return -EINVAL;
+	}
+
+	uccs = (struct ucc_slow_private *)
+		kmalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
+	if (!uccs) {
+		uccs_err
+		    ("ucc_slow_init: No memory for UCC slow data structure!");
+		return -ENOMEM;
+	}
+	memset(uccs, 0, sizeof(struct ucc_slow_private));
+
+	/* Fill slow UCC structure */
+	uccs->us_info = us_info;
+	uccs->saved_uccm = 0;
+	uccs->p_rx_frame = 0;
+	uccs->us_regs = us_info->us_regs;
+	us_regs = uccs->us_regs;
+	uccs->p_ucce = (u16 *) & (us_regs->ucce);
+	uccs->p_uccm = (u16 *) & (us_regs->uccm);
+#ifdef STATISTICS
+	uccs->rx_frames = 0;
+	uccs->tx_frames = 0;
+	uccs->rx_discarded = 0;
+#endif				/* STATISTICS */
+
+	/* Get PRAM base */
+	uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE,
+						 ALIGNMENT_OF_UCC_SLOW_PRAM);
+	if (IS_MURAM_ERR(uccs->us_pram_offset)) {
+		uccs_err
+		    ("ucc_slow_init: Can not allocate MURAM memory "
+			"for Slow UCC.");
+		ucc_slow_free(uccs);
+		return -ENOMEM;
+	}
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+			(u32) uccs->us_pram_offset);
+
+	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
+
+	/* Init Guemr register */
+	if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) {
+		uccs_err("ucc_slow_init: Could not init the guemr register.");
+		ucc_slow_free(uccs);
+		return ret;
+	}
+
+	/* Set UCC to slow type */
+	if ((ret = ucc_set_type(us_info->ucc_num,
+				(struct ucc_common *) (us_info->us_regs),
+				UCC_SPEED_TYPE_SLOW))) {
+		uccs_err("ucc_slow_init: Could not init the guemr register.");
+		ucc_slow_free(uccs);
+		return ret;
+	}
+
+	out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+
+	INIT_LIST_HEAD(&uccs->confQ);
+
+	/* Allocate BDs. */
+	uccs->rx_base_offset =
+		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
+				QE_ALIGNMENT_OF_BD);
+	if (IS_MURAM_ERR(uccs->rx_base_offset)) {
+		uccs_err("ucc_slow_init: No memory for Rx BD's.");
+		uccs->rx_base_offset = 0;
+		ucc_slow_free(uccs);
+		return -ENOMEM;
+	}
+
+	uccs->tx_base_offset =
+		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
+			QE_ALIGNMENT_OF_BD);
+	if (IS_MURAM_ERR(uccs->tx_base_offset)) {
+		uccs_err("ucc_slow_init: No memory for Tx BD's.");
+		uccs->tx_base_offset = 0;
+		ucc_slow_free(uccs);
+		return -ENOMEM;
+	}
+
+	/* Init Tx bds */
+	bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
+	for (i = 0; i < us_info->tx_bd_ring_len; i++) {
+		/* clear bd buffer */
+		out_be32(&(((struct qe_bd *)bd)->buf), 0);
+		/* set bd status and length */
+		out_be32((u32*)bd, 0);
+		bd += sizeof(struct qe_bd);
+	}
+	bd -= sizeof(struct qe_bd);
+	/* set bd status and length */
+	out_be32((u32*)bd, T_W);	/* for last BD set Wrap bit */
+
+	/* Init Rx bds */
+	bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
+	for (i = 0; i < us_info->rx_bd_ring_len; i++) {
+		/* set bd status and length */
+		out_be32((u32*)bd, 0);
+		/* clear bd buffer */
+		out_be32(&(((struct qe_bd *)bd)->buf), 0);
+		bd += sizeof(struct qe_bd);
+	}
+	bd -= sizeof(struct qe_bd);
+	/* set bd status and length */
+	out_be32((u32*)bd, R_W);	/* for last BD set Wrap bit */
+
+	/* Set GUMR (For more details see the hardware spec.). */
+	/* gumr_h */
+	gumr = 0;
+	gumr |= us_info->tcrc;
+	if (us_info->cdp)
+		gumr |= UCC_SLOW_GUMR_H_CDP;
+	if (us_info->ctsp)
+		gumr |= UCC_SLOW_GUMR_H_CTSP;
+	if (us_info->cds)
+		gumr |= UCC_SLOW_GUMR_H_CDS;
+	if (us_info->ctss)
+		gumr |= UCC_SLOW_GUMR_H_CTSS;
+	if (us_info->tfl)
+		gumr |= UCC_SLOW_GUMR_H_TFL;
+	if (us_info->rfw)
+		gumr |= UCC_SLOW_GUMR_H_RFW;
+	if (us_info->txsy)
+		gumr |= UCC_SLOW_GUMR_H_TXSY;
+	if (us_info->rtsm)
+		gumr |= UCC_SLOW_GUMR_H_RTSM;
+	out_be32(&us_regs->gumr_h, gumr);
+
+	/* gumr_l */
+	gumr = 0;
+	if (us_info->tci)
+		gumr |= UCC_SLOW_GUMR_L_TCI;
+	if (us_info->rinv)
+		gumr |= UCC_SLOW_GUMR_L_RINV;
+	if (us_info->tinv)
+		gumr |= UCC_SLOW_GUMR_L_TINV;
+	if (us_info->tend)
+		gumr |= UCC_SLOW_GUMR_L_TEND;
+	gumr |= us_info->tdcr;
+	gumr |= us_info->rdcr;
+	gumr |= us_info->tenc;
+	gumr |= us_info->renc;
+	gumr |= us_info->diag;
+	gumr |= us_info->mode;
+	out_be32(&us_regs->gumr_l, gumr);
+
+	/* Function code registers */
+	/* function_code has initial value 0 */
+
+	/* if the data is in cachable memory, the 'global' */
+	/* in the function code should be set. */
+	function_code |= us_info->data_mem_part;
+	function_code |= QE_BMR_BYTE_ORDER_BO_MOT;	/* Required for QE */
+	uccs->us_pram->tfcr = function_code;
+	uccs->us_pram->rfcr = function_code;
+
+	/* rbase, tbase are offsets from MURAM base */
+	out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
+	out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+
+	/* Mux clocking */
+	/* Grant Support */
+	ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
+	/* Breakpoint Support */
+	ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
+	/* Set Tsa or NMSI mode. */
+	ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
+	/* If NMSI (not Tsa), set Tx and Rx clock. */
+	if (!us_info->tsa) {
+		/* Rx clock routing */
+		if (ucc_set_qe_mux_rxtx
+		    (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
+			uccs_err
+			    ("ucc_slow_init: Illegal value for parameter"
+				" 'RxClock'.");
+			ucc_slow_free(uccs);
+			return -EINVAL;
+		}
+		/* Tx clock routing */
+		if (ucc_set_qe_mux_rxtx(us_info->ucc_num,
+				 us_info->tx_clock, COMM_DIR_TX)) {
+			uccs_err
+			    ("ucc_slow_init: Illegal value for parameter "
+				"'TxClock'.");
+			ucc_slow_free(uccs);
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * INTERRUPTS
+	 */
+	/* Set interrupt mask register at UCC level. */
+	out_be16(&us_regs->uccm, us_info->uccm_mask);
+
+	/* First, clear anything pending at UCC level, */
+	/* otherwise, old garbage may come through */
+	/* as soon as the dam is opened. */
+
+	/* Writing '1' clears */
+	out_be16(&us_regs->ucce, 0xffff);
+
+	/* Issue QE Init command */
+	if (us_info->init_tx && us_info->init_rx)
+		command = QE_INIT_TX_RX;
+	else if (us_info->init_tx)
+		command = QE_INIT_TX;
+	else
+		command = QE_INIT_RX;	/* We know at least one is TRUE */
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+	*uccs_ret = uccs;
+	return 0;
+}
+
+void ucc_slow_free(struct ucc_slow_private * uccs)
+{
+	if (!uccs)
+		return;
+
+	if (uccs->rx_base_offset)
+		qe_muram_free(uccs->rx_base_offset);
+
+	if (uccs->tx_base_offset)
+		qe_muram_free(uccs->tx_base_offset);
+
+	if (uccs->us_pram) {
+		qe_muram_free(uccs->us_pram_offset);
+		uccs->us_pram = NULL;
+	}
+
+	kfree(uccs);
+}
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
new file mode 100644
index 00000000000..ce12f85fff9
--- /dev/null
+++ b/include/asm-powerpc/immap_qe.h
@@ -0,0 +1,477 @@
+/*
+ * include/asm-powerpc/immap_qe.h
+ *
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+
+#define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+	__be32	iadd;		/* I-RAM Address Register */
+	__be32	idata;		/* I-RAM Data Register */
+	u8	res0[0x78];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+	__be32	qicr;
+	__be32	qivec;
+	__be32	qripnr;
+	__be32	qipnr;
+	__be32	qipxcc;
+	__be32	qipycc;
+	__be32	qipwcc;
+	__be32	qipzcc;
+	__be32	qimr;
+	__be32	qrimr;
+	__be32	qicnr;
+	u8	res0[0x4];
+	__be32	qiprta;
+	__be32	qiprtb;
+	u8	res1[0x4];
+	__be32	qricr;
+	u8	res2[0x20];
+	__be32	qhivec;
+	u8	res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+	__be32	cecr;		/* QE command register */
+	__be32	ceccr;		/* QE controller configuration register */
+	__be32	cecdr;		/* QE command data register */
+	u8	res0[0xA];
+	__be16	ceter;		/* QE timer event register */
+	u8	res1[0x2];
+	__be16	cetmr;		/* QE timers mask register */
+	__be32	cetscr;		/* QE time-stamp timer control register */
+	__be32	cetsr1;		/* QE time-stamp register 1 */
+	__be32	cetsr2;		/* QE time-stamp register 2 */
+	u8	res2[0x8];
+	__be32	cevter;		/* QE virtual tasks event register */
+	__be32	cevtmr;		/* QE virtual tasks mask register */
+	__be16	cercr;		/* QE RAM control register */
+	u8	res3[0x2];
+	u8	res4[0x24];
+	__be16	ceexe1;		/* QE external request 1 event register */
+	u8	res5[0x2];
+	__be16	ceexm1;		/* QE external request 1 mask register */
+	u8	res6[0x2];
+	__be16	ceexe2;		/* QE external request 2 event register */
+	u8	res7[0x2];
+	__be16	ceexm2;		/* QE external request 2 mask register */
+	u8	res8[0x2];
+	__be16	ceexe3;		/* QE external request 3 event register */
+	u8	res9[0x2];
+	__be16	ceexm3;		/* QE external request 3 mask register */
+	u8	res10[0x2];
+	__be16	ceexe4;		/* QE external request 4 event register */
+	u8	res11[0x2];
+	__be16	ceexm4;		/* QE external request 4 mask register */
+	u8	res12[0x2];
+	u8	res13[0x280];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+	__be32	cmxgcr;		/* CMX general clock route register */
+	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
+	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
+	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
+	__be32	cmxucr1;	/* CMX UCC1, UCC3 clock route register */
+	__be32	cmxucr2;	/* CMX UCC5, UCC7 clock route register */
+	__be32	cmxucr3;	/* CMX UCC2, UCC4 clock route register */
+	__be32	cmxucr4;	/* CMX UCC6, UCC8 clock route register */
+	__be32	cmxupcr;	/* CMX UPC clock route register */
+	u8	res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+	u8	gtcfr1;		/* Timer 1 and Timer 2 global config register*/
+	u8	res0[0x3];
+	u8	gtcfr2;		/* Timer 3 and timer 4 global config register*/
+	u8	res1[0xB];
+	__be16	gtmdr1;		/* Timer 1 mode register */
+	__be16	gtmdr2;		/* Timer 2 mode register */
+	__be16	gtrfr1;		/* Timer 1 reference register */
+	__be16	gtrfr2;		/* Timer 2 reference register */
+	__be16	gtcpr1;		/* Timer 1 capture register */
+	__be16	gtcpr2;		/* Timer 2 capture register */
+	__be16	gtcnr1;		/* Timer 1 counter */
+	__be16	gtcnr2;		/* Timer 2 counter */
+	__be16	gtmdr3;		/* Timer 3 mode register */
+	__be16	gtmdr4;		/* Timer 4 mode register */
+	__be16	gtrfr3;		/* Timer 3 reference register */
+	__be16	gtrfr4;		/* Timer 4 reference register */
+	__be16	gtcpr3;		/* Timer 3 capture register */
+	__be16	gtcpr4;		/* Timer 4 capture register */
+	__be16	gtcnr3;		/* Timer 3 counter */
+	__be16	gtcnr4;		/* Timer 4 counter */
+	__be16	gtevr1;		/* Timer 1 event register */
+	__be16	gtevr2;		/* Timer 2 event register */
+	__be16	gtevr3;		/* Timer 3 event register */
+	__be16	gtevr4;		/* Timer 4 event register */
+	__be16	gtps;		/* Timer 1 prescale register */
+	u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+	__be32	brgc1;		/* BRG1 configuration register */
+	__be32	brgc2;		/* BRG2 configuration register */
+	__be32	brgc3;		/* BRG3 configuration register */
+	__be32	brgc4;		/* BRG4 configuration register */
+	__be32	brgc5;		/* BRG5 configuration register */
+	__be32	brgc6;		/* BRG6 configuration register */
+	__be32	brgc7;		/* BRG7 configuration register */
+	__be32	brgc8;		/* BRG8 configuration register */
+	__be32	brgc9;		/* BRG9 configuration register */
+	__be32	brgc10;		/* BRG10 configuration register */
+	__be32	brgc11;		/* BRG11 configuration register */
+	__be32	brgc12;		/* BRG12 configuration register */
+	__be32	brgc13;		/* BRG13 configuration register */
+	__be32	brgc14;		/* BRG14 configuration register */
+	__be32	brgc15;		/* BRG15 configuration register */
+	__be32	brgc16;		/* BRG16 configuration register */
+	u8	res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+	u8	res0[0x20];
+	__be32	spmode;		/* SPI mode register */
+	u8	res1[0x2];
+	u8	spie;		/* SPI event register */
+	u8	res2[0x1];
+	u8	res3[0x2];
+	u8	spim;		/* SPI mask register */
+	u8	res4[0x1];
+	u8	res5[0x1];
+	u8	spcom;		/* SPI command register */
+	u8	res6[0x2];
+	__be32	spitd;		/* SPI transmit data register (cpu mode) */
+	__be32	spird;		/* SPI receive data register (cpu mode) */
+	u8	res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+	__be16	siamr1;		/* SI1 TDMA mode register */
+	__be16	sibmr1;		/* SI1 TDMB mode register */
+	__be16	sicmr1;		/* SI1 TDMC mode register */
+	__be16	sidmr1;		/* SI1 TDMD mode register */
+	u8	siglmr1_h;	/* SI1 global mode register high */
+	u8	res0[0x1];
+	u8	sicmdr1_h;	/* SI1 command register high */
+	u8	res2[0x1];
+	u8	sistr1_h;	/* SI1 status register high */
+	u8	res3[0x1];
+	__be16	sirsr1_h;	/* SI1 RAM shadow address register high */
+	u8	sitarc1;	/* SI1 RAM counter Tx TDMA */
+	u8	sitbrc1;	/* SI1 RAM counter Tx TDMB */
+	u8	sitcrc1;	/* SI1 RAM counter Tx TDMC */
+	u8	sitdrc1;	/* SI1 RAM counter Tx TDMD */
+	u8	sirarc1;	/* SI1 RAM counter Rx TDMA */
+	u8	sirbrc1;	/* SI1 RAM counter Rx TDMB */
+	u8	sircrc1;	/* SI1 RAM counter Rx TDMC */
+	u8	sirdrc1;	/* SI1 RAM counter Rx TDMD */
+	u8	res4[0x8];
+	__be16	siemr1;		/* SI1 TDME mode register 16 bits */
+	__be16	sifmr1;		/* SI1 TDMF mode register 16 bits */
+	__be16	sigmr1;		/* SI1 TDMG mode register 16 bits */
+	__be16	sihmr1;		/* SI1 TDMH mode register 16 bits */
+	u8	siglmg1_l;	/* SI1 global mode register low 8 bits */
+	u8	res5[0x1];
+	u8	sicmdr1_l;	/* SI1 command register low 8 bits */
+	u8	res6[0x1];
+	u8	sistr1_l;	/* SI1 status register low 8 bits */
+	u8	res7[0x1];
+	__be16	sirsr1_l;	/* SI1 RAM shadow address register low 16 bits*/
+	u8	siterc1;	/* SI1 RAM counter Tx TDME 8 bits */
+	u8	sitfrc1;	/* SI1 RAM counter Tx TDMF 8 bits */
+	u8	sitgrc1;	/* SI1 RAM counter Tx TDMG 8 bits */
+	u8	sithrc1;	/* SI1 RAM counter Tx TDMH 8 bits */
+	u8	sirerc1;	/* SI1 RAM counter Rx TDME 8 bits */
+	u8	sirfrc1;	/* SI1 RAM counter Rx TDMF 8 bits */
+	u8	sirgrc1;	/* SI1 RAM counter Rx TDMG 8 bits */
+	u8	sirhrc1;	/* SI1 RAM counter Rx TDMH 8 bits */
+	u8	res8[0x8];
+	__be32	siml1;		/* SI1 multiframe limit register */
+	u8	siedm1;		/* SI1 extended diagnostic mode register */
+	u8	res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+	u8 	tx[0x400];
+	u8	rx[0x400];
+	u8	res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	__be16	usb_usep1;
+	__be16	usb_usep2;
+	__be16	usb_usep3;
+	__be16	usb_usep4;
+	u8	res2[4];
+	__be16	usb_usber;
+	u8	res3[2];
+	__be16	usb_usbmr;
+	u8	res4[1];
+	u8	usb_usbs;
+	__be16	usb_ussft;
+	u8	res5[2];
+	__be16	usb_usfrn;
+	u8	res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct mcc {
+	__be32	mcce;		/* MCC event register */
+	__be32	mccm;		/* MCC mask register */
+	__be32	mccf;		/* MCC configuration register */
+	__be32	merl;		/* MCC emergency request level register */
+	u8	res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+	__be32	gumr_l;		/* UCCx general mode register (low) */
+	__be32	gumr_h;		/* UCCx general mode register (high) */
+	__be16	upsmr;		/* UCCx protocol-specific mode register */
+	u8	res0[0x2];
+	__be16	utodr;		/* UCCx transmit on demand register */
+	__be16	udsr;		/* UCCx data synchronization register */
+	__be16	ucce;		/* UCCx event register */
+	u8	res1[0x2];
+	__be16	uccm;		/* UCCx mask register */
+	u8	res2[0x1];
+	u8	uccs;		/* UCCx status register */
+	u8	res3[0x24];
+	__be16	utpt;
+	u8	guemr;		/* UCC general extended mode register */
+	u8	res4[0x200 - 0x091];
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+	__be32	gumr;		/* UCCx general mode register */
+	__be32	upsmr;		/* UCCx protocol-specific mode register */
+	__be16	utodr;		/* UCCx transmit on demand register */
+	u8	res0[0x2];
+	__be16	udsr;		/* UCCx data synchronization register */
+	u8	res1[0x2];
+	__be32	ucce;		/* UCCx event register */
+	__be32	uccm;		/* UCCx mask register */
+	u8	uccs;		/* UCCx status register */
+	u8	res2[0x7];
+	__be32	urfb;		/* UCC receive FIFO base */
+	__be16	urfs;		/* UCC receive FIFO size */
+	u8	res3[0x2];
+	__be16	urfet;		/* UCC receive FIFO emergency threshold */
+	__be16	urfset;		/* UCC receive FIFO special emergency
+				   threshold */
+	__be32	utfb;		/* UCC transmit FIFO base */
+	__be16	utfs;		/* UCC transmit FIFO size */
+	u8	res4[0x2];
+	__be16	utfet;		/* UCC transmit FIFO emergency threshold */
+	u8	res5[0x2];
+	__be16	utftt;		/* UCC transmit FIFO transmit threshold */
+	u8	res6[0x2];
+	__be16	utpt;		/* UCC transmit polling timer */
+	u8	res7[0x2];
+	__be32	urtry;		/* UCC retry counter register */
+	u8	res8[0x4C];
+	u8	guemr;		/* UCC general extended mode register */
+	u8	res9[0x100 - 0x091];
+} __attribute__ ((packed));
+
+/* QE UCC */
+struct ucc_common {
+	u8	res1[0x90];
+	u8	guemr;
+	u8	res2[0x200 - 0x091];
+} __attribute__ ((packed));
+
+struct ucc {
+	union {
+		struct	ucc_slow slow;
+		struct	ucc_fast fast;
+		struct	ucc_common common;
+	};
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+	__be32	upgcr;		/* UTOPIA/POS general configuration register */
+	__be32	uplpa;		/* UTOPIA/POS last PHY address */
+	__be32	uphec;		/* ATM HEC register */
+	__be32	upuc;		/* UTOPIA/POS UCC configuration */
+	__be32	updc1;		/* UTOPIA/POS device 1 configuration */
+	__be32	updc2;		/* UTOPIA/POS device 2 configuration */
+	__be32	updc3;		/* UTOPIA/POS device 3 configuration */
+	__be32	updc4;		/* UTOPIA/POS device 4 configuration */
+	__be32	upstpa;		/* UTOPIA/POS STPA threshold */
+	u8	res0[0xC];
+	__be32	updrs1_h;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs1_l;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs2_h;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs2_l;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs3_h;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs3_l;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs4_h;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrs4_l;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrp1;		/* UTOPIA/POS device 1 receive priority low */
+	__be32	updrp2;		/* UTOPIA/POS device 2 receive priority low */
+	__be32	updrp3;		/* UTOPIA/POS device 3 receive priority low */
+	__be32	updrp4;		/* UTOPIA/POS device 4 receive priority low */
+	__be32	upde1;		/* UTOPIA/POS device 1 event */
+	__be32	upde2;		/* UTOPIA/POS device 2 event */
+	__be32	upde3;		/* UTOPIA/POS device 3 event */
+	__be32	upde4;		/* UTOPIA/POS device 4 event */
+	__be16	uprp1;
+	__be16	uprp2;
+	__be16	uprp3;
+	__be16	uprp4;
+	u8	res1[0x8];
+	__be16	uptirr1_0;	/* Device 1 transmit internal rate 0 */
+	__be16	uptirr1_1;	/* Device 1 transmit internal rate 1 */
+	__be16	uptirr1_2;	/* Device 1 transmit internal rate 2 */
+	__be16	uptirr1_3;	/* Device 1 transmit internal rate 3 */
+	__be16	uptirr2_0;	/* Device 2 transmit internal rate 0 */
+	__be16	uptirr2_1;	/* Device 2 transmit internal rate 1 */
+	__be16	uptirr2_2;	/* Device 2 transmit internal rate 2 */
+	__be16	uptirr2_3;	/* Device 2 transmit internal rate 3 */
+	__be16	uptirr3_0;	/* Device 3 transmit internal rate 0 */
+	__be16	uptirr3_1;	/* Device 3 transmit internal rate 1 */
+	__be16	uptirr3_2;	/* Device 3 transmit internal rate 2 */
+	__be16	uptirr3_3;	/* Device 3 transmit internal rate 3 */
+	__be16	uptirr4_0;	/* Device 4 transmit internal rate 0 */
+	__be16	uptirr4_1;	/* Device 4 transmit internal rate 1 */
+	__be16	uptirr4_2;	/* Device 4 transmit internal rate 2 */
+	__be16	uptirr4_3;	/* Device 4 transmit internal rate 3 */
+	__be32	uper1;		/* Device 1 port enable register */
+	__be32	uper2;		/* Device 2 port enable register */
+	__be32	uper3;		/* Device 3 port enable register */
+	__be32	uper4;		/* Device 4 port enable register */
+	u8	res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+	__be32	sdsr;		/* Serial DMA status register */
+	__be32	sdmr;		/* Serial DMA mode register */
+	__be32	sdtr1;		/* SDMA system bus threshold register */
+	__be32	sdtr2;		/* SDMA secondary bus threshold register */
+	__be32	sdhy1;		/* SDMA system bus hysteresis register */
+	__be32	sdhy2;		/* SDMA secondary bus hysteresis register */
+	__be32	sdta1;		/* SDMA system bus address register */
+	__be32	sdta2;		/* SDMA secondary bus address register */
+	__be32	sdtm1;		/* SDMA system bus MSNUM register */
+	__be32	sdtm2;		/* SDMA secondary bus MSNUM register */
+	u8	res0[0x10];
+	__be32	sdaqr;		/* SDMA address bus qualify register */
+	__be32	sdaqmr;		/* SDMA address bus qualify mask register */
+	u8	res1[0x4];
+	__be32	sdebcr;		/* SDMA CAM entries base register */
+	u8	res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+	__be32	bpdcr;		/* Breakpoint debug command register */
+	__be32	bpdsr;		/* Breakpoint debug status register */
+	__be32	bpdmr;		/* Breakpoint debug mask register */
+	__be32	bprmrr0;	/* Breakpoint request mode risc register 0 */
+	__be32	bprmrr1;	/* Breakpoint request mode risc register 1 */
+	u8	res0[0x8];
+	__be32	bprmtr0;	/* Breakpoint request mode trb register 0 */
+	__be32	bprmtr1;	/* Breakpoint request mode trb register 1 */
+	u8	res1[0x8];
+	__be32	bprmir;		/* Breakpoint request mode immediate register */
+	__be32	bprmsr;		/* Breakpoint request mode serial register */
+	__be32	bpemr;		/* Breakpoint exit mode register */
+	u8	res2[0x48];
+} __attribute__ ((packed));
+
+/* RISC Special Registers (Trap and Breakpoint) */
+struct rsp {
+	u8	fixme[0x100];
+} __attribute__ ((packed));
+
+struct qe_immap {
+	struct qe_iram		iram;		/* I-RAM */
+	struct qe_ic_regs	ic;		/* Interrupt Controller */
+	struct cp_qe		cp;		/* Communications Processor */
+	struct qe_mux		qmx;		/* QE Multiplexer */
+	struct qe_timers	qet;		/* QE Timers */
+	struct spi		spi[0x2];	/* spi */
+	struct mcc		mcc;		/* mcc */
+	struct qe_brg		brg;		/* brg */
+	struct usb_ctlr		usb;		/* USB */
+	struct si1		si1;		/* SI */
+	u8			res11[0x800];
+	struct sir		sir;		/* SI Routing Tables */
+	struct ucc		ucc1;		/* ucc1 */
+	struct ucc		ucc3;		/* ucc3 */
+	struct ucc		ucc5;		/* ucc5 */
+	struct ucc		ucc7;		/* ucc7 */
+	u8			res12[0x600];
+	struct upc		upc1;		/* MultiPHY UTOPIA POS Ctrlr 1*/
+	struct ucc		ucc2;		/* ucc2 */
+	struct ucc		ucc4;		/* ucc4 */
+	struct ucc		ucc6;		/* ucc6 */
+	struct ucc		ucc8;		/* ucc8 */
+	u8			res13[0x600];
+	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
+	struct sdma		sdma;		/* SDMA */
+	struct dbg		dbg;		/* Debug Space */
+	struct rsp		rsp[0x2];	/* RISC Special Registers
+						   (Trap and Breakpoint) */
+	u8			res14[0x300];
+	u8			res15[0x3A00];
+	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
+	u8			muram[0xC000];	/* 0x110000 - 0x11C000
+						   Multi-user RAM */
+	u8			res17[0x24000];	/* 0x11C000 - 0x140000 */
+	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+{
+	if ( ((u32)address >= (u32)qe_immr) &&
+			((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
+		return (unsigned long)(address - (u32)qe_immr +
+				(u32)get_qe_base());
+	return (unsigned long)virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
new file mode 100644
index 00000000000..a62168ec535
--- /dev/null
+++ b/include/asm-powerpc/qe.h
@@ -0,0 +1,457 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <asm/immap_qe.h>
+
+#define QE_NUM_OF_SNUM	28
+#define QE_NUM_OF_BRGS	16
+#define QE_NUM_OF_PORTS	1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM		0
+#define MEM_PART_SECONDARY	1
+#define MEM_PART_MURAM		2
+
+/* Export QE common operations */
+extern void qe_reset(void);
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+
+/* QE internal API */
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+void qe_setbrg(u32 brg, u32 rate);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+u32 qe_muram_alloc(u32 size, u32 align);
+int qe_muram_free(u32 offset);
+u32 qe_muram_alloc_fixed(u32 offset, u32 size);
+void qe_muram_dump(void);
+void *qe_muram_addr(u32 offset);
+
+/* Buffer descriptors */
+struct qe_bd {
+	u16 status;
+	u16 length;
+	u32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK	0xffff0000
+#define BD_LENGTH_MASK	0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN	16	/* ??? */
+#define QE_ALIGNMENT_OF_BD	8
+#define QE_ALIGNMENT_OF_PRAM	64
+
+/* RISC allocation */
+enum qe_risc_allocation {
+	QE_RISC_ALLOCATION_RISC1 = 1,	/* RISC 1 */
+	QE_RISC_ALLOCATION_RISC2 = 2,	/* RISC 2 */
+	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3	/* Dynamically choose
+						   RISC 1 or RISC 2 */
+};
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= 0x3f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 8 bytes */
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= 0x5f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+		= 0x0,/* not used */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,	/* 8 bytes */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,	/* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+	u16 tm_base;		/* QE timer table base adr */
+	u16 tm_ptr;		/* QE timer table pointer */
+	u16 r_tmr;		/* QE timer mode register */
+	u16 r_tmv;		/* QE timer valid register */
+	u32 tm_cmd;		/* QE timer cmd register */
+	u32 tm_cnt;		/* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE	8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+	u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+	COMM_DIR_NONE = 0,
+	COMM_DIR_RX = 1,
+	COMM_DIR_TX = 2,
+	COMM_DIR_RX_AND_TX = 3
+};
+
+/* Clocks and BRGs */
+enum qe_clock {
+	QE_CLK_NONE = 0,
+	QE_BRG1,		/* Baud Rate Generator 1 */
+	QE_BRG2,		/* Baud Rate Generator 2 */
+	QE_BRG3,		/* Baud Rate Generator 3 */
+	QE_BRG4,		/* Baud Rate Generator 4 */
+	QE_BRG5,		/* Baud Rate Generator 5 */
+	QE_BRG6,		/* Baud Rate Generator 6 */
+	QE_BRG7,		/* Baud Rate Generator 7 */
+	QE_BRG8,		/* Baud Rate Generator 8 */
+	QE_BRG9,		/* Baud Rate Generator 9 */
+	QE_BRG10,		/* Baud Rate Generator 10 */
+	QE_BRG11,		/* Baud Rate Generator 11 */
+	QE_BRG12,		/* Baud Rate Generator 12 */
+	QE_BRG13,		/* Baud Rate Generator 13 */
+	QE_BRG14,		/* Baud Rate Generator 14 */
+	QE_BRG15,		/* Baud Rate Generator 15 */
+	QE_BRG16,		/* Baud Rate Generator 16 */
+	QE_CLK1,		/* Clock 1 */
+	QE_CLK2,		/* Clock 2 */
+	QE_CLK3,		/* Clock 3 */
+	QE_CLK4,		/* Clock 4 */
+	QE_CLK5,		/* Clock 5 */
+	QE_CLK6,		/* Clock 6 */
+	QE_CLK7,		/* Clock 7 */
+	QE_CLK8,		/* Clock 8 */
+	QE_CLK9,		/* Clock 9 */
+	QE_CLK10,		/* Clock 10 */
+	QE_CLK11,		/* Clock 11 */
+	QE_CLK12,		/* Clock 12 */
+	QE_CLK13,		/* Clock 13 */
+	QE_CLK14,		/* Clock 14 */
+	QE_CLK15,		/* Clock 15 */
+	QE_CLK16,		/* Clock 16 */
+	QE_CLK17,		/* Clock 17 */
+	QE_CLK18,		/* Clock 18 */
+	QE_CLK19,		/* Clock 19 */
+	QE_CLK20,		/* Clock 20 */
+	QE_CLK21,		/* Clock 21 */
+	QE_CLK22,		/* Clock 22 */
+	QE_CLK23,		/* Clock 23 */
+	QE_CLK24,		/* Clock 24 */
+	QE_CLK_DUMMY,
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG		0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXUCR_GRANT			0x00008000
+#define QE_CMXUCR_TSA			0x00004000
+#define QE_CMXUCR_BKPT			0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG		0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXGCR_USBCS			0x0000000f
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG			0x00010000
+#define QE_RESET			0x80000000
+#define QE_INIT_TX_RX			0x00000000
+#define QE_INIT_RX			0x00000001
+#define QE_INIT_TX			0x00000002
+#define QE_ENTER_HUNT_MODE		0x00000003
+#define QE_STOP_TX			0x00000004
+#define QE_GRACEFUL_STOP_TX		0x00000005
+#define QE_RESTART_TX			0x00000006
+#define QE_CLOSE_RX_BD			0x00000007
+#define QE_SWITCH_COMMAND		0x00000007
+#define QE_SET_GROUP_ADDRESS		0x00000008
+#define QE_START_IDMA			0x00000009
+#define QE_MCC_STOP_RX			0x00000009
+#define QE_ATM_TRANSMIT			0x0000000a
+#define QE_HPAC_CLEAR_ALL		0x0000000b
+#define QE_GRACEFUL_STOP_RX		0x0000001a
+#define QE_RESTART_RX			0x0000001b
+#define QE_HPAC_SET_PRIORITY		0x0000010b
+#define QE_HPAC_STOP_TX			0x0000020b
+#define QE_HPAC_STOP_RX			0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX	0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX	0x0000050b
+#define QE_HPAC_START_TX		0x0000060b
+#define QE_HPAC_START_RX		0x0000070b
+#define QE_USB_STOP_TX			0x0000000a
+#define QE_USB_RESTART_TX		0x0000000b
+#define QE_QMC_STOP_TX			0x0000000c
+#define QE_QMC_STOP_RX			0x0000000d
+#define QE_SS7_SU_FIL_RESET		0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS			0x0000000a
+#define QE_MCC_INIT_TX_RX_16		0x00000003
+#define QE_MCC_STOP_TX			0x00000004
+#define QE_MCC_INIT_TX_1		0x00000005
+#define QE_MCC_INIT_RX_1		0x00000006
+#define QE_MCC_RESET			0x00000007
+#define QE_SET_TIMER			0x00000008
+#define QE_RANDOM_NUMBER		0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT	0x00000011
+#define QE_ASSIGN_PAGE			0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY	0x00000013
+#define QE_START_FLOW_CONTROL		0x00000014
+#define QE_STOP_FLOW_CONTROL		0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
+
+#define QE_ASSIGN_RISC			0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT		6
+#define QE_CR_MCN_USB_SHIFT		4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT	8
+#define QE_CR_SNUM_SHIFT		17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID		0x00000000
+#define QE_CR_SUBBLOCK_USB		0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
+#define QE_CR_SUBBLOCK_MCC1		0x03800000
+#define QE_CR_SUBBLOCK_MCC2		0x03a00000
+#define QE_CR_SUBBLOCK_MCC3		0x03000000
+#define QE_CR_SUBBLOCK_IDMA1		0x02800000
+#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
+#define QE_CR_SUBBLOCK_HPAC		0x01e00000
+#define QE_CR_SUBBLOCK_SPI1		0x01400000
+#define QE_CR_SUBBLOCK_SPI2		0x01600000
+#define QE_CR_SUBBLOCK_RAND		0x01c00000
+#define QE_CR_SUBBLOCK_TIMER		0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
+#define QE_CR_PROTOCOL_ATM_POS		0x0A
+#define QE_CR_PROTOCOL_ETHERNET		0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
+
+/* BMR byte order */
+#define QE_BMR_BYTE_ORDER_BO_PPC	0x08	/* powerpc little endian */
+#define QE_BMR_BYTE_ORDER_BO_MOT	0x10	/* motorola big endian */
+#define QE_BMR_BYTE_ORDER_BO_MAX	0x18
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE		0x00010000
+#define QE_BRGC_DIVISOR_SHIFT	1
+#define QE_BRGC_DIVISOR_MAX	0xFFF
+#define QE_BRGC_DIV16		1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS	0x80
+#define QE_GTCFR1_STP2	0x20
+#define QE_GTCFR1_RST2	0x10
+#define QE_GTCFR1_GM2	0x08
+#define QE_GTCFR1_GM1	0x04
+#define QE_GTCFR1_STP1	0x02
+#define QE_GTCFR1_RST1	0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1	0x02000000
+#define QE_SDSR_BER2	0x01000000
+
+#define QE_SDMR_GLB_1_MSK	0x80000000
+#define QE_SDMR_ADR_SEL		0x20000000
+#define QE_SDMR_BER1_MSK	0x02000000
+#define QE_SDMR_BER2_MSK	0x01000000
+#define QE_SDMR_EB1_MSK		0x00800000
+#define QE_SDMR_ER1_MSK		0x00080000
+#define QE_SDMR_ER2_MSK		0x00040000
+#define QE_SDMR_CEN_MASK	0x0000E000
+#define QE_SDMR_SBER_1		0x00000200
+#define QE_SDMR_SBER_2		0x00000200
+#define QE_SDMR_EB1_PR_MASK	0x000000C0
+#define QE_SDMR_ER1_PR		0x00000008
+
+#define QE_SDMR_CEN_SHIFT	13
+#define QE_SDMR_EB1_PR_SHIFT	6
+
+#define QE_SDTM_MSNUM_SHIFT	24
+
+#define QE_SDEBCR_BA_MASK	0x01FFFFFF
+
+/* UPC */
+#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
+#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
+#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
+#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
+
+/* UCC */
+#define UCC_GUEMR_MODE_MASK_RX	0x02
+#define UCC_GUEMR_MODE_MASK_TX	0x01
+#define UCC_GUEMR_MODE_FAST_RX	0x02
+#define UCC_GUEMR_MODE_FAST_TX	0x01
+#define UCC_GUEMR_MODE_SLOW_RX	0x00
+#define UCC_GUEMR_MODE_SLOW_TX	0x00
+#define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
+					   must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+	u16 rbase;		/* RX BD base address */
+	u16 tbase;		/* TX BD base address */
+	u8 rfcr;		/* Rx function code */
+	u8 tfcr;		/* Tx function code */
+	u16 mrblr;		/* Rx buffer length */
+	u32 rstate;		/* Rx internal state */
+	u32 rptr;		/* Rx internal data pointer */
+	u16 rbptr;		/* rb BD Pointer */
+	u16 rcount;		/* Rx internal byte count */
+	u32 rtemp;		/* Rx temp */
+	u32 tstate;		/* Tx internal state */
+	u32 tptr;		/* Tx internal data pointer */
+	u16 tbptr;		/* Tx BD pointer */
+	u16 tcount;		/* Tx byte count */
+	u32 ttemp;		/* Tx temp */
+	u32 rcrc;		/* temp receive CRC */
+	u32 tcrc;		/* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_CRC16		0x00004000
+#define UCC_SLOW_GUMR_H_CRC16CCITT	0x00000000
+#define UCC_SLOW_GUMR_H_CRC32CCITT	0x00008000
+#define UCC_SLOW_GUMR_H_REVD		0x00002000
+#define UCC_SLOW_GUMR_H_TRX		0x00001000
+#define UCC_SLOW_GUMR_H_TTX		0x00000800
+#define UCC_SLOW_GUMR_H_CDP		0x00000400
+#define UCC_SLOW_GUMR_H_CTSP		0x00000200
+#define UCC_SLOW_GUMR_H_CDS		0x00000100
+#define UCC_SLOW_GUMR_H_CTSS		0x00000080
+#define UCC_SLOW_GUMR_H_TFL		0x00000040
+#define UCC_SLOW_GUMR_H_RFW		0x00000020
+#define UCC_SLOW_GUMR_H_TXSY		0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC		0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC		0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC		0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM		0x00000002
+#define UCC_SLOW_GUMR_H_RSYN		0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI		0x10000000
+#define UCC_SLOW_GUMR_L_RINV		0x02000000
+#define UCC_SLOW_GUMR_L_TINV		0x01000000
+#define UCC_SLOW_GUMR_L_TEND		0x00020000
+#define UCC_SLOW_GUMR_L_ENR		0x00000020
+#define UCC_SLOW_GUMR_L_ENT		0x00000010
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI	0x20000000
+#define UCC_FAST_GUMR_TRX	0x10000000
+#define UCC_FAST_GUMR_TTX	0x08000000
+#define UCC_FAST_GUMR_CDP	0x04000000
+#define UCC_FAST_GUMR_CTSP	0x02000000
+#define UCC_FAST_GUMR_CDS	0x01000000
+#define UCC_FAST_GUMR_CTSS	0x00800000
+#define UCC_FAST_GUMR_TXSY	0x00020000
+#define UCC_FAST_GUMR_RSYN	0x00010000
+#define UCC_FAST_GUMR_RTSM	0x00002000
+#define UCC_FAST_GUMR_REVD	0x00000400
+#define UCC_FAST_GUMR_ENR	0x00000020
+#define UCC_FAST_GUMR_ENT	0x00000010
+
+/* Slow UCC Event Register (UCCE) */
+#define UCC_SLOW_UCCE_GLR	0x1000
+#define UCC_SLOW_UCCE_GLT	0x0800
+#define UCC_SLOW_UCCE_DCC	0x0400
+#define UCC_SLOW_UCCE_FLG	0x0200
+#define UCC_SLOW_UCCE_AB	0x0200
+#define UCC_SLOW_UCCE_IDLE	0x0100
+#define UCC_SLOW_UCCE_GRA	0x0080
+#define UCC_SLOW_UCCE_TXE	0x0010
+#define UCC_SLOW_UCCE_RXF	0x0008
+#define UCC_SLOW_UCCE_CCR	0x0008
+#define UCC_SLOW_UCCE_RCH	0x0008
+#define UCC_SLOW_UCCE_BSY	0x0004
+#define UCC_SLOW_UCCE_TXB	0x0002
+#define UCC_SLOW_UCCE_TX	0x0002
+#define UCC_SLOW_UCCE_RX	0x0001
+#define UCC_SLOW_UCCE_GOV	0x0001
+#define UCC_SLOW_UCCE_GUN	0x0002
+#define UCC_SLOW_UCCE_GINT	0x0004
+#define UCC_SLOW_UCCE_IQOV	0x0008
+
+#define UCC_SLOW_UCCE_HDLC_SET	(UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+		UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
+		UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_ENET_SET	(UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+		UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
+#define UCC_SLOW_UCCE_TRANS_SET	(UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+		UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
+		UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_UART_SET	(UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
+		UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
+		UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_QMC_SET	(UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
+		UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
+
+#define UCC_SLOW_UCCE_OTHER	(UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+		UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
+		UCC_SLOW_UCCE_GLR)
+
+#define UCC_SLOW_INTR_TX	UCC_SLOW_UCCE_TXB
+#define UCC_SLOW_INTR_RX	(UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
+#define UCC_SLOW_INTR		(UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD	0x8000
+#define UCC_FAST_TOD	0x8000
+
+/* Function code masks */
+#define FC_GBL				0x20
+#define FC_DTB_LCL			0x02
+#define UCC_FAST_FUNCTION_CODE_GBL	0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL	0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL	0x01
+
+static inline long IS_MURAM_ERR(const u32 offset)
+{
+	return offset > (u32) - 1000L;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h
new file mode 100644
index 00000000000..e386fb7e44b
--- /dev/null
+++ b/include/asm-powerpc/qe_ic.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-powerpc/qe_ic.h
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+#define NUM_OF_QE_IC_GROUPS	6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W			0x00000001
+#define QE_IC_SPREADMODE_GRP_X			0x00000002
+#define QE_IC_SPREADMODE_GRP_Y			0x00000004
+#define QE_IC_SPREADMODE_GRP_Z			0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
+
+#define QE_IC_LOW_SIGNAL			0x00000100
+#define QE_IC_HIGH_SIGNAL			0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
+	QE_IC_GRP_X,		/* QE interrupt controller group X */
+	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
+	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
+	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
+	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
+};
+
+void qe_ic_init(struct device_node *node, unsigned int flags);
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
new file mode 100644
index 00000000000..afe3076bdc0
--- /dev/null
+++ b/include/asm-powerpc/ucc.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM	8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+	UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
+};
+
+/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
+*/
+enum ucc_pram_initial_offset {
+	UCC_PRAM_OFFSET_UCC1 = 0x8400,
+	UCC_PRAM_OFFSET_UCC2 = 0x8500,
+	UCC_PRAM_OFFSET_UCC3 = 0x8600,
+	UCC_PRAM_OFFSET_UCC4 = 0x9000,
+	UCC_PRAM_OFFSET_UCC5 = 0x8000,
+	UCC_PRAM_OFFSET_UCC6 = 0x8100,
+	UCC_PRAM_OFFSET_UCC7 = 0x8200,
+	UCC_PRAM_OFFSET_UCC8 = 0x8300
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * regs    - (In) pointer to registers base for the UCC.
+ * speed   - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+		 enum ucc_speed_type speed);
+
+/* ucc_init_guemr
+ * Init the Guemr register.
+ *
+ * regs - (In) pointer to registers base for the UCC.
+ */
+int ucc_init_guemr(struct ucc_common *regs);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num);
+
+int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif				/* __UCC_H__ */
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
new file mode 100644
index 00000000000..39d1c90fd2c
--- /dev/null
+++ b/include/asm-powerpc/ucc_fast.h
@@ -0,0 +1,243 @@
+/*
+ * include/asm-powerpc/ucc_fast.h
+ *
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_F	0x04000000	/* first */
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN			4
+#define UCC_FAST_MRBLR_ALIGNMENT		4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL				0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+	UCC_FAST_16_BIT_CRC = 0x00000000,
+	UCC_FAST_CRC_RESERVED0 = 0x00000040,
+	UCC_FAST_32_BIT_CRC = 0x00000080,
+	UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+	int ucc_num;
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	u32 regs;
+	int irq;
+	u32 uccm_mask;
+	int bd_mem_part;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int tci;
+	int txsy;
+	int rtsm;
+	int revd;
+	int rsyn;
+	u16 max_rx_buf_length;
+	u16 urfs;
+	u16 urfet;
+	u16 urfset;
+	u16 utfs;
+	u16 utfet;
+	u16 utftt;
+	u16 ufpt;
+	enum ucc_fast_channel_protocol_mode mode;
+	enum ucc_fast_transparent_txrx ttx_trx;
+	enum ucc_fast_tx_encoding_method tenc;
+	enum ucc_fast_rx_decoding_method renc;
+	enum ucc_fast_transparent_tcrc tcrc;
+	enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+	struct ucc_fast_info *uf_info;
+	struct ucc_fast *uf_regs;	/* a pointer to memory map of UCC regs. */
+	u32 *p_ucce;		/* a pointer to the event register in memory. */
+	u32 *p_uccm;		/* a pointer to the mask register in memory. */
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+						    virtual fifo */
+	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+						    virtual fifo */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counter. */
+	u32 rx_frames;		/* Received frames counter (only frames
+				   passed to application). */
+	u32 tx_discarded;	/* Discarded tx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+	u32 rx_discarded;	/* Discarded rx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+#endif				/* STATISTICS */
+	u16 mrblr;		/* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info  - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif				/* __UCC_FAST_H__ */
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
new file mode 100644
index 00000000000..ca93bc99237
--- /dev/null
+++ b/include/asm-powerpc/ucc_slow.h
@@ -0,0 +1,289 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_PAD	0x40000000	/* add pads to short frames */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+#define T_A	0x04000000	/* Address - the data transmitted as address
+				   chars */
+#define T_TC	0x04000000	/* transmit CRC */
+#define T_CM	0x02000000	/* continuous mode */
+#define T_DEF	0x02000000	/* collision on previous attempt to transmit */
+#define T_P	0x01000000	/* Preamble - send Preamble sequence before
+				   data */
+#define T_HB	0x01000000	/* heartbeat */
+#define T_NS	0x00800000	/* No Stop */
+#define T_LC	0x00800000	/* late collision */
+#define T_RL	0x00400000	/* retransmission limit */
+#define T_UN	0x00020000	/* underrun */
+#define T_CT	0x00010000	/* CTS lost */
+#define T_CSL	0x00010000	/* carrier sense lost */
+#define T_RC	0x003c0000	/* retry count */
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_C	0x08000000	/* the last byte in this buffer is a cntl
+				   char */
+#define R_F	0x04000000	/* first */
+#define R_A	0x04000000	/* the first byte in this buffer is address
+				   byte */
+#define R_CM	0x02000000	/* continuous mode */
+#define R_ID	0x01000000	/* buffer close on reception of idles */
+#define R_M	0x01000000	/* Frame received because of promiscuous
+				   mode */
+#define R_AM	0x00800000	/* Address match */
+#define R_DE	0x00800000	/* Address match */
+#define R_LG	0x00200000	/* Break received */
+#define R_BR	0x00200000	/* Frame length violation */
+#define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
+#define R_FR	0x00100000	/* Framing Error (no stop bit) character
+				   received */
+#define R_PR	0x00080000	/* Parity Error character received */
+#define R_AB	0x00080000	/* Frame Aborted */
+#define R_SH	0x00080000	/* frame is too short */
+#define R_CR	0x00040000	/* CRC Error */
+#define R_OV	0x00020000	/* Overrun */
+#define R_CD	0x00010000	/* CD lost */
+#define R_CL	0x00010000	/* this frame is closed because of a
+				   collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN		4
+#define UCC_SLOW_MRBLR_ALIGNMENT	4
+#define UCC_SLOW_PRAM_SIZE		0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM	64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+	/* 32-bit CCITT CRC (Ethernet and HDLC) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+	int ucc_num;
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	struct ucc_slow *us_regs;
+	int irq;
+	u16 uccm_mask;
+	int data_mem_part;
+	int init_tx;
+	int init_rx;
+	u32 tx_bd_ring_len;
+	u32 rx_bd_ring_len;
+	int rx_interrupts;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int rinv;
+	int tinv;
+	int rtsm;
+	int rfw;
+	int tci;
+	int tend;
+	int tfl;
+	int txsy;
+	u16 max_rx_buf_length;
+	enum ucc_slow_transparent_tcrc tcrc;
+	enum ucc_slow_channel_protocol_mode mode;
+	enum ucc_slow_diag_mode diag;
+	enum ucc_slow_tx_oversampling_rate tdcr;
+	enum ucc_slow_rx_oversampling_rate rdcr;
+	enum ucc_slow_tx_encoding_method tenc;
+	enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+	struct ucc_slow_info *us_info;
+	struct ucc_slow *us_regs;	/* a pointer to memory map of UCC regs */
+	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
+	u32 us_pram_offset;
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	struct list_head confQ;	/* frames passed to chip waiting for tx */
+	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
+				   and length for first BD in a frame */
+	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
+	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
+	u8 *confBd;		/* next BD for confirm after Tx */
+	u8 *tx_bd;		/* next BD for new Tx request */
+	u8 *rx_bd;		/* next BD to collect after Rx */
+	void *p_rx_frame;	/* accumulating receive frame */
+	u16 *p_ucce;		/* a pointer to the event register in memory.
+				 */
+	u16 *p_uccm;		/* a pointer to the mask register in memory */
+	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counters */
+	u32 rx_frames;		/* Received frames counters (only frames
+				   passed to application) */
+	u32 rx_discarded;	/* Discarded frames counters (frames that
+				   were discarded by the driver due to
+				   errors) */
+#endif				/* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info  - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_x
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_x(struct ucc_slow_private * uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif				/* __UCC_SLOW_H__ */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 16fbe59edeb..3da29e2d524 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -46,18 +46,17 @@
 
 struct gianfar_platform_data {
 	/* device specific information */
-	u32 device_flags;
-
+	u32	device_flags;
 	/* board specific information */
-	u32 board_flags;
-	u32 bus_id;
-	u32 phy_id;
-	u8 mac_addr[6];
+	u32	board_flags;
+	u32	bus_id;
+	u32	phy_id;
+	u8	mac_addr[6];
 };
 
 struct gianfar_mdio_data {
 	/* board specific information */
-	int irq[32];
+	int	irq[32];
 };
 
 /* Flags related to gianfar device features */
@@ -76,14 +75,13 @@ struct gianfar_mdio_data {
 
 struct fsl_i2c_platform_data {
 	/* device specific information */
-	u32 device_flags;
+	u32	device_flags;
 };
 
 /* Flags related to I2C device features */
 #define FSL_I2C_DEV_SEPARATE_DFSRR	0x00000001
 #define FSL_I2C_DEV_CLOCK_5200		0x00000002
 
-
 enum fsl_usb2_operating_modes {
 	FSL_USB2_MPH_HOST,
 	FSL_USB2_DR_HOST,
@@ -101,9 +99,9 @@ enum fsl_usb2_phy_modes {
 
 struct fsl_usb2_platform_data {
 	/* board specific information */
-	enum fsl_usb2_operating_modes operating_mode;
-	enum fsl_usb2_phy_modes phy_mode;
-	unsigned int port_enables;
+	enum fsl_usb2_operating_modes	operating_mode;
+	enum fsl_usb2_phy_modes		phy_mode;
+	unsigned int			port_enables;
 };
 
 /* Flags in fsl_usb2_mph_platform_data */
@@ -121,5 +119,44 @@ struct fsl_spi_platform_data {
 	u32	sysclk;
 };
 
-#endif				/* _FSL_DEVICE_H_ */
-#endif				/* __KERNEL__ */
+/* Ethernet interface (phy management and speed)
+*/
+enum enet_interface {
+	ENET_10_MII,		/* 10 Base T,   MII interface */
+	ENET_10_RMII,		/* 10 Base T,  RMII interface */
+	ENET_10_RGMII,		/* 10 Base T, RGMII interface */
+	ENET_100_MII,		/* 100 Base T,   MII interface */
+	ENET_100_RMII,		/* 100 Base T,  RMII interface */
+	ENET_100_RGMII,		/* 100 Base T, RGMII interface */
+	ENET_1000_GMII,		/* 1000 Base T,  GMII interface */
+	ENET_1000_RGMII,	/* 1000 Base T, RGMII interface */
+	ENET_1000_TBI,		/* 1000 Base T,   TBI interface */
+	ENET_1000_RTBI		/* 1000 Base T,  RTBI interface */
+};
+
+struct ucc_geth_platform_data {
+	/* device specific information */
+	u32			device_flags;
+	u32			phy_reg_addr;
+
+	/* board specific information */
+	u32			board_flags;
+	u8			rx_clock;
+	u8			tx_clock;
+	u32			phy_id;
+	enum enet_interface	phy_interface;
+	u32			phy_interrupt;
+	u8			mac_addr[6];
+};
+
+/* Flags related to UCC Gigabit Ethernet device features */
+#define FSL_UGETH_DEV_HAS_GIGABIT		0x00000001
+#define FSL_UGETH_DEV_HAS_COALESCE		0x00000002
+#define FSL_UGETH_DEV_HAS_RMON			0x00000004
+
+/* Flags in ucc_geth_platform_data */
+#define FSL_UGETH_BRD_HAS_PHY_INTR		0x00000001
+				/* if not set use a timer */
+
+#endif /* _FSL_DEVICE_H_ */
+#endif /* __KERNEL__ */