cyclades: overall cleanup

- remove changelog from the file. we don't care about ancient
  history
- update copyright year
- update version
- constify some stuff
- empty lines removal
- unused variables and macros removal
- remove some asm/ includes, they are sucked by linux/ variants

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 12 insertions, 586 deletions

diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 87a40bc7564..3884ea43993 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -11,7 +11,7 @@
  * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
  * Modified and maintained by Marcio Saito <marcio@cyclades.com>.
  *
- * Copyright (C) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (C) 2007-2009 Jiri Slaby <jirislaby@gmail.com>
  *
  * Much of the design and some of the code came from serial.c
  * which was copyright (C) 1991, 1992  Linus Torvalds.  It was
@@ -19,577 +19,9 @@
  * and then fixed as suggested by Michael K. Johnson 12/12/92.
  * Converted to pci probing and cleaned up by Jiri Slaby.
  *
- * This version supports shared IRQ's (only for PCI boards).
- *
- * Prevent users from opening non-existing Z ports.
- *
- * Revision 2.3.2.8   2000/07/06 18:14:16 ivan
- * Fixed the PCI detection function to work properly on Alpha systems.
- * Implemented support for TIOCSERGETLSR ioctl.
- * Implemented full support for non-standard baud rates.
- *
- * Revision 2.3.2.7   2000/06/01 18:26:34 ivan
- * Request PLX I/O region, although driver doesn't use it, to avoid
- * problems with other drivers accessing it.
- * Removed count for on-board buffer characters in cy_chars_in_buffer
- * (Cyclades-Z only).
- *
- * Revision 2.3.2.6   2000/05/05 13:56:05 ivan
- * Driver now reports physical instead of virtual memory addresses.
- * Masks were added to some Cyclades-Z read accesses.
- * Implemented workaround for PLX9050 bug that would cause a system lockup
- * in certain systems, depending on the MMIO addresses allocated to the
- * board.
- * Changed the Tx interrupt programming in the CD1400 chips to boost up
- * performance (Cyclom-Y only).
- * Code is now compliant with the new module interface (module_[init|exit]).
- * Make use of the PCI helper functions to access PCI resources.
- * Did some code "housekeeping".
- *
- * Revision 2.3.2.5   2000/01/19 14:35:33 ivan
- * Fixed bug in cy_set_termios on CRTSCTS flag turnoff.
- *
- * Revision 2.3.2.4   2000/01/17 09:19:40 ivan
- * Fixed SMP locking in Cyclom-Y interrupt handler.
- *
- * Revision 2.3.2.3   1999/12/28 12:11:39 ivan
- * Added a new cyclades_card field called nports to allow the driver to
- * know the exact number of ports found by the Z firmware after its load;
- * RX buffer contention prevention logic on interrupt op mode revisited
- * (Cyclades-Z only);
- * Revisited printk's for Z debug;
- * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined;
- *
- * Revision 2.3.2.2   1999/10/01 11:27:43 ivan
- * Fixed bug in cyz_poll that would make all ports but port 0
- * unable to transmit/receive data (Cyclades-Z only);
- * Implemented logic to prevent the RX buffer from being stuck with data
- * due to a driver / firmware race condition in interrupt op mode
- * (Cyclades-Z only);
- * Fixed bug in block_til_ready logic that would lead to a system crash;
- * Revisited cy_close spinlock usage;
- *
- * Revision 2.3.2.1   1999/09/28 11:01:22 ivan
- * Revisited CONFIG_PCI conditional compilation for PCI board support;
- * Implemented TIOCGICOUNT and TIOCMIWAIT ioctl support;
- * _Major_ cleanup on the Cyclades-Z interrupt support code / logic;
- * Removed CTS handling from the driver -- this is now completely handled
- * by the firmware (Cyclades-Z only);
- * Flush RX on-board buffers on a port open (Cyclades-Z only);
- * Fixed handling of ASYNC_SPD_* TTY flags;
- * Module unload now unmaps all memory area allocated by ioremap;
- *
- * Revision 2.3.1.1   1999/07/15 16:45:53 ivan
- * Removed CY_PROC conditional compilation;
- * Implemented SMP-awareness for the driver;
- * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off]
- * functions;
- * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs
- * (irq=NN) as parameters (only for ISA boards);
- * Fixed bug in set_line_char that would prevent the Cyclades-Z
- * ports from being configured at speeds above 115.2Kbps;
- * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control
- * switching from working properly;
- * The driver now only prints IRQ info for the Cyclades-Z if it's
- * configured to work in interrupt mode;
- *
- * Revision 2.2.2.3   1999/06/28 11:13:29 ivan
- * Added support for interrupt mode operation for the Z cards;
- * Removed the driver inactivity control for the Z;
- * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when
- * the Z firmware is not loaded yet;
- * Replaced the "manual" Z Tx flush buffer by a call to a FW command of
- * same functionality;
- * Implemented workaround for IRQ setting loss on the PCI configuration
- * registers after a PCI bridge EEPROM reload (affects PLX9060 only);
- *
- * Revision 2.2.2.2  1999/05/14 17:18:15 ivan
- * /proc entry location changed to /proc/tty/driver/cyclades;
- * Added support to shared IRQ's (only for PCI boards);
- * Added support for Cobalt Qube2 systems;
- * IRQ [de]allocation scheme revisited;
- * BREAK implementation changed in order to make use of the 'break_ctl'
- * TTY facility;
- * Fixed typo in TTY structure field 'driver_name';
- * Included a PCI bridge reset and EEPROM reload in the board
- * initialization code (for both Y and Z series).
- *
- * Revision 2.2.2.1  1999/04/08 16:17:43 ivan
- * Fixed a bug in cy_wait_until_sent that was preventing the port to be
- * closed properly after a SIGINT;
- * Module usage counter scheme revisited;
- * Added support to the upcoming Y PCI boards (i.e., support to additional
- * PCI Device ID's).
- *
- * Revision 2.2.1.10 1999/01/20 16:14:29 ivan
- * Removed all unnecessary page-alignement operations in ioremap calls
- * (ioremap is currently safe for these operations).
- *
- * Revision 2.2.1.9  1998/12/30 18:18:30 ivan
- * Changed access to PLX PCI bridge registers from I/O to MMIO, in
- * order to make PLX9050-based boards work with certain motherboards.
- *
- * Revision 2.2.1.8  1998/11/13 12:46:20 ivan
- * cy_close function now resets (correctly) the tty->closing flag;
- * JIFFIES_DIFF macro fixed.
- *
- * Revision 2.2.1.7  1998/09/03 12:07:28 ivan
- * Fixed bug in cy_close function, which was not informing HW of
- * which port should have the reception disabled before doing so;
- * fixed Cyclom-8YoP hardware detection bug.
- *
- * Revision 2.2.1.6  1998/08/20 17:15:39 ivan
- * Fixed bug in cy_close function, which causes malfunction
- * of one of the first 4 ports when a higher port is closed
- * (Cyclom-Y only).
- *
- * Revision 2.2.1.5  1998/08/10 18:10:28 ivan
- * Fixed Cyclom-4Yo hardware detection bug.
- *
- * Revision 2.2.1.4  1998/08/04 11:02:50 ivan
- * /proc/cyclades implementation with great collaboration of
- * Marc Lewis <marc@blarg.net>;
- * cyy_interrupt was changed to avoid occurrence of kernel oopses
- * during PPP operation.
- *
- * Revision 2.2.1.3  1998/06/01 12:09:10 ivan
- * General code review in order to comply with 2.1 kernel standards;
- * data loss prevention for slow devices revisited (cy_wait_until_sent
- * was created);
- * removed conditional compilation for new/old PCI structure support
- * (now the driver only supports the new PCI structure).
- *
- * Revision 2.2.1.1  1998/03/19 16:43:12 ivan
- * added conditional compilation for new/old PCI structure support;
- * removed kernel series (2.0.x / 2.1.x) conditional compilation.
- *
- * Revision 2.1.1.3  1998/03/16 18:01:12 ivan
- * cleaned up the data loss fix;
- * fixed XON/XOFF handling once more (Cyclades-Z);
- * general review of the driver routines;
- * introduction of a mechanism to prevent data loss with slow
- * printers, by forcing a delay before closing the port.
- *
- * Revision 2.1.1.2  1998/02/17 16:50:00 ivan
- * fixed detection/handling of new CD1400 in Ye boards;
- * fixed XON/XOFF handling (Cyclades-Z);
- * fixed data loss caused by a premature port close;
- * introduction of a flag that holds the CD1400 version ID per port
- * (used by the CYGETCD1400VER new ioctl).
- *
- * Revision 2.1.1.1  1997/12/03 17:31:19 ivan
- * Code review for the module cleanup routine;
- * fixed RTS and DTR status report for new CD1400's in get_modem_info;
- * includes anonymous changes regarding signal_pending.
- *
- * Revision 2.1  1997/11/01 17:42:41 ivan
- * Changes in the driver to support Alpha systems (except 8Zo V_1);
- * BREAK fix for the Cyclades-Z boards;
- * driver inactivity control by FW implemented;
- * introduction of flag that allows driver to take advantage of
- * a special CD1400 feature related to HW flow control;
- * added support for the CD1400  rev. J (Cyclom-Y boards);
- * introduction of ioctls to:
- *  - control the rtsdtr_inv flag (Cyclom-Y);
- *  - control the rflow flag (Cyclom-Y);
- *  - adjust the polling interval (Cyclades-Z);
- *
- * Revision 1.36.4.33  1997/06/27 19:00:00  ivan
- * Fixes related to kernel version conditional
- * compilation.
- *
- * Revision 1.36.4.32  1997/06/14 19:30:00  ivan
- * Compatibility issues between kernels 2.0.x and
- * 2.1.x (mainly related to clear_bit function).
- *
- * Revision 1.36.4.31  1997/06/03 15:30:00  ivan
- * Changes to define the memory window according to the
- * board type.
- *
- * Revision 1.36.4.30  1997/05/16 15:30:00  daniel
- * Changes to support new cycladesZ boards.
- *
- * Revision 1.36.4.29  1997/05/12 11:30:00  daniel
- * Merge of Bentson's and Daniel's version 1.36.4.28.
- * Corrects bug in cy_detect_pci: check if there are more
- * ports than the number of static structs allocated.
- * Warning message during initialization if this driver is
- * used with the new generation of cycladesZ boards.  Those
- * will be supported only in next release of the driver.
- * Corrects bug in cy_detect_pci and cy_detect_isa that
- * returned wrong number of VALID boards, when a cyclomY
- * was found with no serial modules connected.
- * Changes to use current (2.1.x) kernel subroutine names
- * and created macros for compilation with 2.0.x kernel,
- * instead of the other way around.
- *
- * Revision 1.36.4.28  1997/05/?? ??:00:00  bentson
- * Change queue_task_irq_off to queue_task_irq.
- * The inline function queue_task_irq_off (tqueue.h)
- * was removed from latest releases of 2.1.x kernel.
- * Use of macro __init to mark the initialization
- * routines, so memory can be reused.
- * Also incorporate implementation of critical region
- * in function cleanup_module() created by anonymous
- * linuxer.
- *
- * Revision 1.36.4.28  1997/04/25 16:00:00  daniel
- * Change to support new firmware that solves DCD problem:
- * application could fail to receive SIGHUP signal when DCD
- * varying too fast.
- *
- * Revision 1.36.4.27  1997/03/26 10:30:00  daniel
- * Changed for support linux versions 2.1.X.
- * Backward compatible with linux versions 2.0.X.
- * Corrected illegal use of filler field in
- * CH_CTRL struct.
- * Deleted some debug messages.
- *
- * Revision 1.36.4.26  1997/02/27 12:00:00  daniel
- * Included check for NULL tty pointer in cyz_poll.
- *
- * Revision 1.36.4.25  1997/02/26 16:28:30  bentson
- * Bill Foster at Blarg! Online services noticed that
- * some of the switch elements of -Z modem control
- * lacked a closing "break;"
- *
- * Revision 1.36.4.24  1997/02/24 11:00:00  daniel
- * Changed low water threshold for buffer xmit_buf
- *
- * Revision 1.36.4.23  1996/12/02 21:50:16  bentson
- * Marcio provided fix to modem status fetch for -Z
- *
- * Revision 1.36.4.22  1996/10/28 22:41:17  bentson
- * improve mapping of -Z control page (thanks to Steve
- * Price <stevep@fa.tdktca.com> for help on this)
- *
- * Revision 1.36.4.21  1996/09/10 17:00:10  bentson
- * shift from CPU-bound to memcopy in cyz_polling operation
- *
- * Revision 1.36.4.20  1996/09/09 18:30:32  Bentson
- * Added support to set and report higher speeds.
- *
- * Revision 1.36.4.19c  1996/08/09 10:00:00  Marcio Saito
- * Some fixes in the HW flow control for the BETA release.
- * Don't try to register the IRQ.
- *
- * Revision 1.36.4.19  1996/08/08 16:23:18  Bentson
- * make sure "cyc" appears in all kernel messages; all soft interrupts
- * handled by same routine; recognize out-of-band reception; comment
- * out some diagnostic messages; leave RTS/CTS flow control to hardware;
- * fix race condition in -Z buffer management; only -Y needs to explicitly
- * flush chars; tidy up some startup messages;
- *
- * Revision 1.36.4.18  1996/07/25 18:57:31  bentson
- * shift MOD_INC_USE_COUNT location to match
- * serial.c; purge some diagnostic messages;
- *
- * Revision 1.36.4.17  1996/07/25 18:01:08  bentson
- * enable modem status messages and fetch & process them; note
- * time of last activity type for each port; set_line_char now
- * supports more than line 0 and treats 0 baud correctly;
- * get_modem_info senses rs_status;
- *
- * Revision 1.36.4.16  1996/07/20 08:43:15  bentson
- * barely works--now's time to turn on
- * more features 'til it breaks
- *
- * Revision 1.36.4.15  1996/07/19 22:30:06  bentson
- * check more -Z board status; shorten boot message
- *
- * Revision 1.36.4.14  1996/07/19 22:20:37  bentson
- * fix reference to ch_ctrl in startup; verify return
- * values from cyz_issue_cmd and cyz_update_channel;
- * more stuff to get modem control correct;
- *
- * Revision 1.36.4.13  1996/07/11 19:53:33  bentson
- * more -Z stuff folded in; re-order changes to put -Z stuff
- * after -Y stuff (to make changes clearer)
- *
- * Revision 1.36.4.12  1996/07/11 15:40:55  bentson
- * Add code to poll Cyclades-Z.  Add code to get & set RS-232 control.
- * Add code to send break.  Clear firmware ID word at startup (so
- * that other code won't talk to inactive board).
- *
- * Revision 1.36.4.11  1996/07/09 05:28:29  bentson
- * add code for -Z in set_line_char
- *
- * Revision 1.36.4.10  1996/07/08 19:28:37  bentson
- * fold more -Z stuff (or in some cases, error messages)
- * into driver; add text to "don't know what to do" messages.
- *
- * Revision 1.36.4.9  1996/07/08 18:38:38  bentson
- * moved compile-time flags near top of file; cosmetic changes
- * to narrow text (to allow 2-up printing); changed many declarations
- * to "static" to limit external symbols; shuffled code order to
- * coalesce -Y and -Z specific code, also to put internal functions
- * in order of tty_driver structure; added code to recognize -Z
- * ports (and for moment, do nothing or report error); add cy_startup
- * to parse boot command line for extra base addresses for ISA probes;
- *
- * Revision 1.36.4.8  1996/06/25 17:40:19  bentson
- * reorder some code, fix types of some vars (int vs. long),
- * add cy_setup to support user declared ISA addresses
- *
- * Revision 1.36.4.7  1996/06/21 23:06:18  bentson
- * dump ioctl based firmware load (it's now a user level
- * program); ensure uninitialzed ports cannot be used
- *
- * Revision 1.36.4.6  1996/06/20 23:17:19  bentson
- * rename vars and restructure some code
- *
- * Revision 1.36.4.5  1996/06/14 15:09:44  bentson
- * get right status back after boot load
- *
- * Revision 1.36.4.4  1996/06/13 19:51:44  bentson
- * successfully loads firmware
- *
- * Revision 1.36.4.3  1996/06/13 06:08:33  bentson
- * add more of the code for the boot/load ioctls
- *
- * Revision 1.36.4.2  1996/06/11 21:00:51  bentson
- * start to add Z functionality--starting with ioctl
- * for loading firmware
- *
- * Revision 1.36.4.1  1996/06/10 18:03:02  bentson
- * added code to recognize Z/PCI card at initialization; report
- * presence, but card is not initialized (because firmware needs
- * to be loaded)
- *
- * Revision 1.36.3.8  1996/06/07 16:29:00  bentson
- * starting minor number at zero; added missing verify_area
- * as noted by Heiko Eißfeldt <heiko@colossus.escape.de>
- *
- * Revision 1.36.3.7  1996/04/19 21:06:18  bentson
- * remove unneeded boot message & fix CLOCAL hardware flow
- * control (Miquel van Smoorenburg <miquels@Q.cistron.nl>);
- * remove unused diagnostic statements; minor 0 is first;
- *
- * Revision 1.36.3.6  1996/03/13 13:21:17  marcio
- * The kernel function vremap (available only in later 1.3.xx kernels)
- * allows the access to memory addresses above the RAM. This revision
- * of the driver supports PCI boards below 1Mb (device id 0x100) and
- * above 1Mb (device id 0x101).
- *
- * Revision 1.36.3.5  1996/03/07 15:20:17  bentson
- * Some global changes to interrupt handling spilled into
- * this driver--mostly unused arguments in system function
- * calls.  Also added change by Marcio Saito which should
- * reduce lost interrupts at startup by fast processors.
- *
- * Revision 1.36.3.4  1995/11/13  20:45:10  bentson
- * Changes by Corey Minyard <minyard@wf-rch.cirr.com> distributed
- * in 1.3.41 kernel to remove a possible race condition, extend
- * some error messages, and let the driver run as a loadable module
- * Change by Alan Wendt <alan@ez0.ezlink.com> to remove a
- * possible race condition.
- * Change by Marcio Saito <marcio@cyclades.com> to fix PCI addressing.
- *
- * Revision 1.36.3.3  1995/11/13  19:44:48  bentson
- * Changes by Linus Torvalds in 1.3.33 kernel distribution
- * required due to reordering of driver initialization.
- * Drivers are now initialized *after* memory management.
- *
- * Revision 1.36.3.2  1995/09/08  22:07:14  bentson
- * remove printk from ISR; fix typo
- *
- * Revision 1.36.3.1  1995/09/01  12:00:42  marcio
- * Minor fixes in the PCI board support. PCI function calls in
- * conditional compilation (CONFIG_PCI). Thanks to Jim Duncan
- * <duncan@okay.com>. "bad serial count" message removed.
- *
- * Revision 1.36.3  1995/08/22  09:19:42  marcio
- * Cyclom-Y/PCI support added. Changes in the cy_init routine and
- * board initialization. Changes in the boot messages. The driver
- * supports up to 4 boards and 64 ports by default.
- *
- * Revision 1.36.1.4  1995/03/29  06:14:14  bentson
- * disambiguate between Cyclom-16Y and Cyclom-32Ye;
- *
- * Revision 1.36.1.3  1995/03/23  22:15:35  bentson
- * add missing break in modem control block in ioctl switch statement
- * (discovered by Michael Edward Chastain <mec@jobe.shell.portal.com>);
- *
- * Revision 1.36.1.2  1995/03/22  19:16:22  bentson
- * make sure CTS flow control is set as soon as possible (thanks
- * to note from David Lambert <lambert@chesapeake.rps.slb.com>);
- *
- * Revision 1.36.1.1  1995/03/13  15:44:43  bentson
- * initialize defaults for receive threshold and stale data timeout;
- * cosmetic changes;
- *
- * Revision 1.36  1995/03/10  23:33:53  bentson
- * added support of chips 4-7 in 32 port Cyclom-Ye;
- * fix cy_interrupt pointer dereference problem
- * (Joe Portman <baron@aa.net>);
- * give better error response if open is attempted on non-existent port
- * (Zachariah Vaum <jchryslr@netcom.com>);
- * correct command timeout (Kenneth Lerman <lerman@@seltd.newnet.com>);
- * conditional compilation for -16Y on systems with fast, noisy bus;
- * comment out diagnostic print function;
- * cleaned up table of base addresses;
- * set receiver time-out period register to correct value,
- * set receive threshold to better default values,
- * set chip timer to more accurate 200 Hz ticking,
- * add code to monitor and modify receive parameters
- * (Rik Faith <faith@cs.unc.edu> Nick Simicich
- * <njs@scifi.emi.net>);
- *
- * Revision 1.35  1994/12/16  13:54:18  steffen
- * additional patch by Marcio Saito for board detection
- * Accidently left out in 1.34
- *
- * Revision 1.34  1994/12/10  12:37:12  steffen
- * This is the corrected version as suggested by Marcio Saito
- *
- * Revision 1.33  1994/12/01  22:41:18  bentson
- * add hooks to support more high speeds directly; add tytso
- * patch regarding CLOCAL wakeups
- *
- * Revision 1.32  1994/11/23  19:50:04  bentson
- * allow direct kernel control of higher signalling rates;
- * look for cards at additional locations
- *
- * Revision 1.31  1994/11/16  04:33:28  bentson
- * ANOTHER fix from Corey Minyard, minyard@wf-rch.cirr.com--
- * a problem in chars_in_buffer has been resolved by some
- * small changes;  this should yield smoother output
- *
- * Revision 1.30  1994/11/16  04:28:05  bentson
- * Fix from Corey Minyard, Internet: minyard@metronet.com,
- * UUCP: minyard@wf-rch.cirr.com, WORK: minyardbnr.ca, to
- * cy_hangup that appears to clear up much (all?) of the
- * DTR glitches; also he's added/cleaned-up diagnostic messages
- *
- * Revision 1.29  1994/11/16  04:16:07  bentson
- * add change proposed by Ralph Sims, ralphs@halcyon.com, to
- * operate higher speeds in same way as other serial ports;
- * add more serial ports (for up to two 16-port muxes).
- *
- * Revision 1.28  1994/11/04  00:13:16  root
- * turn off diagnostic messages
- *
- * Revision 1.27  1994/11/03  23:46:37  root
- * bunch of changes to bring driver into greater conformance
- * with the serial.c driver (looking for missed fixes)
- *
- * Revision 1.26  1994/11/03  22:40:36  root
- * automatic interrupt probing fixed.
- *
- * Revision 1.25  1994/11/03  20:17:02  root
- * start to implement auto-irq
- *
- * Revision 1.24  1994/11/03  18:01:55  root
- * still working on modem signals--trying not to drop DTR
- * during the getty/login processes
- *
- * Revision 1.23  1994/11/03  17:51:36  root
- * extend baud rate support; set receive threshold as function
- * of baud rate; fix some problems with RTS/CTS;
- *
- * Revision 1.22  1994/11/02  18:05:35  root
- * changed arguments to udelay to type long to get
- * delays to be of correct duration
- *
- * Revision 1.21  1994/11/02  17:37:30  root
- * employ udelay (after calibrating loops_per_second earlier
- * in init/main.c) instead of using home-grown delay routines
- *
- * Revision 1.20  1994/11/02  03:11:38  root
- * cy_chars_in_buffer forces a return value of 0 to let
- * login work (don't know why it does); some functions
- * that were returning EFAULT, now executes the code;
- * more work on deciding when to disable xmit interrupts;
- *
- * Revision 1.19  1994/11/01  20:10:14  root
- * define routine to start transmission interrupts (by enabling
- * transmit interrupts); directly enable/disable modem interrupts;
- *
- * Revision 1.18  1994/11/01  18:40:45  bentson
- * Don't always enable transmit interrupts in startup; interrupt on
- * TxMpty instead of TxRdy to help characters get out before shutdown;
- * restructure xmit interrupt to check for chars first and quit if
- * none are ready to go; modem status (MXVRx) is upright, _not_ inverted
- * (to my view);
- *
- * Revision 1.17  1994/10/30  04:39:45  bentson
- * rename serial_driver and callout_driver to cy_serial_driver and
- * cy_callout_driver to avoid linkage interference; initialize
- * info->type to PORT_CIRRUS; ruggedize paranoia test; elide ->port
- * from cyclades_port structure; add paranoia check to cy_close;
- *
- * Revision 1.16  1994/10/30  01:14:33  bentson
- * change major numbers; add some _early_ return statements;
- *
- * Revision 1.15  1994/10/29  06:43:15  bentson
- * final tidying up for clean compile;  enable some error reporting
- *
- * Revision 1.14  1994/10/28  20:30:22  Bentson
- * lots of changes to drag the driver towards the new tty_io
- * structures and operation.  not expected to work, but may
- * compile cleanly.
- *
- * Revision 1.13  1994/07/21  23:08:57  Bentson
- * add some diagnostic cruft; support 24 lines (for testing
- * both -8Y and -16Y cards; be more thorough in servicing all
- * chips during interrupt; add "volatile" a few places to
- * circumvent compiler optimizations; fix base & offset
- * computations in block_til_ready (was causing chip 0 to
- * stop operation)
- *
- * Revision 1.12  1994/07/19  16:42:11  Bentson
- * add some hackery for kernel version 1.1.8; expand
- * error messages; refine timing for delay loops and
- * declare loop params volatile
- *
- * Revision 1.11  1994/06/11  21:53:10  bentson
- * get use of save_car right in transmit interrupt service
- *
- * Revision 1.10.1.1  1994/06/11  21:31:18  bentson
- * add some diagnostic printing; try to fix save_car stuff
- *
- * Revision 1.10  1994/06/11  20:36:08  bentson
- * clean up compiler warnings
- *
- * Revision 1.9  1994/06/11  19:42:46  bentson
- * added a bunch of code to support modem signalling
- *
- * Revision 1.8  1994/06/11  17:57:07  bentson
- * recognize break & parity error
- *
- * Revision 1.7  1994/06/05  05:51:34  bentson
- * Reorder baud table to be monotonic; add cli to CP; discard
- * incoming characters and status if the line isn't open; start to
- * fold code into cy_throttle; start to port get_serial_info,
- * set_serial_info, get_modem_info, set_modem_info, and send_break
- * from serial.c; expand cy_ioctl; relocate and expand config_setup;
- * get flow control characters from tty struct; invalidate ports w/o
- * hardware;
- *
- * Revision 1.6  1994/05/31  18:42:21  bentson
- * add a loop-breaker in the interrupt service routine;
- * note when port is initialized so that it can be shut
- * down under the right conditions; receive works without
- * any obvious errors
- *
- * Revision 1.5  1994/05/30  00:55:02  bentson
- * transmit works without obvious errors
- *
- * Revision 1.4  1994/05/27  18:46:27  bentson
- * incorporated more code from lib_y.c; can now print short
- * strings under interrupt control to port zero; seems to
- * select ports/channels/lines correctly
- *
- * Revision 1.3  1994/05/25  22:12:44  bentson
- * shifting from multi-port on a card to proper multiplexor
- * data structures;  added skeletons of most routines
- *
- * Revision 1.2  1994/05/19  13:21:43  bentson
- * start to crib from other sources
- *
  */
 
-#define CY_VERSION	"2.5"
+#define CY_VERSION	"2.6"
 
 /* If you need to install more boards than NR_CARDS, change the constant
    in the definition below. No other change is necessary to support up to
@@ -648,9 +80,7 @@
 #include <linux/firmware.h>
 #include <linux/device.h>
 
-#include <asm/system.h>
 #include <linux/io.h>
-#include <asm/irq.h>
 #include <linux/uaccess.h>
 
 #include <linux/kernel.h>
@@ -666,7 +96,6 @@ static void cy_send_xchar(struct tty_struct *tty, char ch);
 #ifndef SERIAL_XMIT_SIZE
 #define	SERIAL_XMIT_SIZE	(min(PAGE_SIZE, 4096))
 #endif
-#define WAKEUP_CHARS		256
 
 #define STD_COM_FLAGS (0)
 
@@ -756,25 +185,25 @@ static int cy_next_channel;	/* next minor available */
  *                                               HI            VHI
  *     20
  */
-static int baud_table[] = {
+static const int baud_table[] = {
 	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
 	1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
 	230400, 0
 };
 
-static char baud_co_25[] = {	/* 25 MHz clock option table */
+static const char baud_co_25[] = {	/* 25 MHz clock option table */
 	/* value =>    00    01   02    03    04 */
 	/* divide by    8    32   128   512  2048 */
 	0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
 	0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-static char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
+static const char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
 	0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
 	0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
 };
 
-static char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
+static const char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
 	/* value =>    00    01   02    03    04 */
 	/* divide by    8    32   128   512  2048 */
 	0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
@@ -782,13 +211,13 @@ static char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
 	0x00
 };
 
-static char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
+static const char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
 	0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
 	0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
 	0x21
 };
 
-static char baud_cor3[] = {	/* receive threshold */
+static const char baud_cor3[] = {	/* receive threshold */
 	0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
 	0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
 	0x07
@@ -805,7 +234,7 @@ static char baud_cor3[] = {	/* receive threshold */
  * cables.
  */
 
-static char rflow_thr[] = {	/* rflow threshold */
+static const char rflow_thr[] = {	/* rflow threshold */
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
 	0x0a
@@ -827,7 +256,7 @@ static const unsigned int cy_chip_offset[] = { 0x0000,
 /* PCI related definitions */
 
 #ifdef CONFIG_PCI
-static struct pci_device_id cy_pci_dev_id[] __devinitdata = {
+static const struct pci_device_id cy_pci_dev_id[] = {
 	/* PCI < 1Mb */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
 	/* PCI > 1Mb */
@@ -893,7 +322,7 @@ static inline bool cyz_is_loaded(struct cyclades_card *card)
 }
 
 static inline int serial_paranoia_check(struct cyclades_port *info,
-		char *name, const char *routine)
+		const char *name, const char *routine)
 {
 #ifdef SERIAL_PARANOIA_CHECK
 	if (!info) {
@@ -909,7 +338,7 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
 	}
 #endif
 	return 0;
-}				/* serial_paranoia_check */
+}
 
 /***********************************************************/
 /********* Start of block of Cyclom-Y specific code ********/
@@ -3030,11 +2459,9 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
-	struct cyclades_port old_info;
 
 	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
 		return -EFAULT;
-	old_info = *info;
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (new_serial.close_delay != info->port.close_delay ||
@@ -3376,7 +2803,6 @@ static int cy_break(struct tty_struct *tty, int break_state)
 static int get_mon_info(struct cyclades_port *info,
 				struct cyclades_monitor __user *mon)
 {
-
 	if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
 		return -EFAULT;
 	info->mon.int_count = 0;