Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: sleep: another HP/Compaq DMI entries for init_set_sci_en_on_resume
  ACPI: add DMI entry for SCI_EN resume quirk on HP dv4
  thermal: sysfs-api.txt - document passive attribute for thermal zones
  thermal: sysfs-api.txt - reformat for improved readability
  acpi: thermal: Add EOL to the trip_point_N_type strings
  ACPI: Move dereference after NULL test
  ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."
  ACPI: add __cpuinit to acpi_processor_add()
  acpi-power-meter: Don't leak ACPI error codes to userspace
  eeepc-laptop: don't enable camera at startup if it's already on.
  Revert "eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated"
  ACPI: clean up video.c boundary checks and types

11 files changed, 281 insertions, 235 deletions

diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 70d68ce8640..a87dc277a5c 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -1,5 +1,5 @@
 Generic Thermal Sysfs driver How To
-=========================
+===================================
 
 Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
 
@@ -10,20 +10,20 @@ Copyright (c)  2008 Intel Corporation
 
 0. Introduction
 
-The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
-and thermal cooling devices (fan, processor...) to register with the thermal management
-solution and to be a part of it.
+The generic thermal sysfs provides a set of interfaces for thermal zone
+devices (sensors) and thermal cooling devices (fan, processor...) to register
+with the thermal management solution and to be a part of it.
 
-This how-to focuses on enabling new thermal zone and cooling devices to participate
-in thermal management.
-This solution is platform independent and any type of thermal zone devices and
-cooling devices should be able to make use of the infrastructure.
+This how-to focuses on enabling new thermal zone and cooling devices to
+participate in thermal management.
+This solution is platform independent and any type of thermal zone devices
+and cooling devices should be able to make use of the infrastructure.
 
-The main task of the thermal sysfs driver is to expose thermal zone attributes as well
-as cooling device attributes to the user space.
-An intelligent thermal management application can make decisions based on inputs
-from thermal zone attributes (the current temperature and trip point temperature)
-and throttle appropriate devices.
+The main task of the thermal sysfs driver is to expose thermal zone attributes
+as well as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on
+inputs from thermal zone attributes (the current temperature and trip point
+temperature) and throttle appropriate devices.
 
 [0-*]	denotes any positive number starting from 0
 [1-*]	denotes any positive number starting from 1
@@ -31,77 +31,77 @@ and throttle appropriate devices.
 1. thermal sysfs driver interface functions
 
 1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
-				void *devdata, struct thermal_zone_device_ops *ops)
-
-	This interface function adds a new thermal zone device (sensor) to
-	/sys/class/thermal folder as thermal_zone[0-*].
-	It tries to bind all the thermal cooling devices registered at the same time.
-
-	name: the thermal zone name.
-	trips: the total number of trip points this thermal zone supports.
-	devdata: device private data
-	ops: thermal zone device call-backs.
-		.bind: bind the thermal zone device with a thermal cooling device.
-		.unbind: unbind the thermal zone device with a thermal cooling device.
-		.get_temp: get the current temperature of the thermal zone.
-		.get_mode: get the current mode (user/kernel) of the thermal zone.
-			   "kernel" means thermal management is done in kernel.
-			   "user" will prevent kernel thermal driver actions upon trip points
-			   so that user applications can take charge of thermal management.
-		.set_mode: set the mode (user/kernel) of the thermal zone.
-		.get_trip_type: get the type of certain trip point.
-		.get_trip_temp: get the temperature above which the certain trip point
-				will be fired.
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
+		int trips, void *devdata, struct thermal_zone_device_ops *ops)
+
+    This interface function adds a new thermal zone device (sensor) to
+    /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+    thermal cooling devices registered at the same time.
+
+    name: the thermal zone name.
+    trips: the total number of trip points this thermal zone supports.
+    devdata: device private data
+    ops: thermal zone device call-backs.
+	.bind: bind the thermal zone device with a thermal cooling device.
+	.unbind: unbind the thermal zone device with a thermal cooling device.
+	.get_temp: get the current temperature of the thermal zone.
+	.get_mode: get the current mode (user/kernel) of the thermal zone.
+	    - "kernel" means thermal management is done in kernel.
+	    - "user" will prevent kernel thermal driver actions upon trip points
+	      so that user applications can take charge of thermal management.
+	.set_mode: set the mode (user/kernel) of the thermal zone.
+	.get_trip_type: get the type of certain trip point.
+	.get_trip_temp: get the temperature above which the certain trip point
+			will be fired.
 
 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 
-	This interface function removes the thermal zone device.
-	It deletes the corresponding entry form /sys/class/thermal folder and unbind all
-	the thermal cooling devices it uses.
+    This interface function removes the thermal zone device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind all the thermal cooling devices it uses.
 
 1.2 thermal cooling device interface
 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
-					void *devdata, struct thermal_cooling_device_ops *)
-
-	This interface function adds a new thermal cooling device (fan/processor/...) to
-	/sys/class/thermal/ folder as cooling_device[0-*].
-	It tries to bind itself to all the thermal zone devices register at the same time.
-	name: the cooling device name.
-	devdata: device private data.
-	ops: thermal cooling devices call-backs.
-		.get_max_state: get the Maximum throttle state of the cooling device.
-		.get_cur_state: get the Current throttle state of the cooling device.
-		.set_cur_state: set the Current throttle state of the cooling device.
+		void *devdata, struct thermal_cooling_device_ops *)
+
+    This interface function adds a new thermal cooling device (fan/processor/...)
+    to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+    to all the thermal zone devices register at the same time.
+    name: the cooling device name.
+    devdata: device private data.
+    ops: thermal cooling devices call-backs.
+	.get_max_state: get the Maximum throttle state of the cooling device.
+	.get_cur_state: get the Current throttle state of the cooling device.
+	.set_cur_state: set the Current throttle state of the cooling device.
 
 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
-	This interface function remove the thermal cooling device.
-	It deletes the corresponding entry form /sys/class/thermal folder and unbind
-	itself from all	the thermal zone devices using it.
+    This interface function remove the thermal cooling device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind itself from all the thermal zone devices using it.
 
 1.3 interface for binding a thermal zone device with a thermal cooling device
 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
-			int trip, struct thermal_cooling_device *cdev);
+		int trip, struct thermal_cooling_device *cdev);
 
-	This interface function bind a thermal cooling device to the certain trip point
-	of a thermal zone device.
-	This function is usually called in the thermal zone device .bind callback.
-	tz: the thermal zone device
-	cdev: thermal cooling device
-	trip: indicates which trip point the cooling devices is associated with
-		 in this thermal zone.
+    This interface function bind a thermal cooling device to the certain trip
+    point of a thermal zone device.
+    This function is usually called in the thermal zone device .bind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+	  in this thermal zone.
 
 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
-				int trip, struct thermal_cooling_device *cdev);
+		int trip, struct thermal_cooling_device *cdev);
 
-	This interface function unbind a thermal cooling device from the certain trip point
-	of a thermal zone device.
-	This function is usually called in the thermal zone device .unbind callback.
-	tz: the thermal zone device
-	cdev: thermal cooling device
-	trip: indicates which trip point the cooling devices is associated with
-		in this thermal zone.
+    This interface function unbind a thermal cooling device from the certain
+    trip point of a thermal zone device. This function is usually called in
+    the thermal zone device .unbind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+	  in this thermal zone.
 
 2. sysfs attributes structure
 
@@ -114,153 +114,166 @@ if hwmon is compiled in or built as a module.
 
 Thermal zone device sys I/F, created once it's registered:
 /sys/class/thermal/thermal_zone[0-*]:
-	|-----type:			Type of the thermal zone
-	|-----temp:			Current temperature
-	|-----mode:			Working mode of the thermal zone
-	|-----trip_point_[0-*]_temp:	Trip point temperature
-	|-----trip_point_[0-*]_type:	Trip point type
+    |---type:			Type of the thermal zone
+    |---temp:			Current temperature
+    |---mode:			Working mode of the thermal zone
+    |---trip_point_[0-*]_temp:	Trip point temperature
+    |---trip_point_[0-*]_type:	Trip point type
 
 Thermal cooling device sys I/F, created once it's registered:
 /sys/class/thermal/cooling_device[0-*]:
-	|-----type :			Type of the cooling device(processor/fan/...)
-	|-----max_state:		Maximum cooling state of the cooling device
-	|-----cur_state:		Current cooling state of the cooling device
+    |---type:			Type of the cooling device(processor/fan/...)
+    |---max_state:		Maximum cooling state of the cooling device
+    |---cur_state:		Current cooling state of the cooling device
 
 
-These two dynamic attributes are created/removed in pairs.
-They represent the relationship between a thermal zone and its associated cooling device.
-They are created/removed for each
-thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
+Then next two dynamic attributes are created/removed in pairs. They represent
+the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each successful execution of
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
 
-/sys/class/thermal/thermal_zone[0-*]
-	|-----cdev[0-*]:		The [0-*]th cooling device in the current thermal zone
-	|-----cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
+/sys/class/thermal/thermal_zone[0-*]:
+    |---cdev[0-*]:		[0-*]th cooling device in current thermal zone
+    |---cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
 
 Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
-the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
-thermal zone device. E.g. the generic thermal driver registers one hwmon class device
-and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_
+of thermal zone device. E.g. the generic thermal driver registers one hwmon
+class device and build the associated hwmon sysfs I/F for all the registered
+ACPI thermal zones.
+
 /sys/class/hwmon/hwmon[0-*]:
-	|-----name:			The type of the thermal zone devices.
-	|-----temp[1-*]_input:		The current temperature of thermal zone [1-*].
-	|-----temp[1-*]_critical:	The critical trip point of thermal zone [1-*].
+    |---name:			The type of the thermal zone devices
+    |---temp[1-*]_input:	The current temperature of thermal zone [1-*]
+    |---temp[1-*]_critical:	The critical trip point of thermal zone [1-*]
+
 Please read Documentation/hwmon/sysfs-interface for additional information.
 
 ***************************
 * Thermal zone attributes *
 ***************************
 
-type				Strings which represent the thermal zone type.
-				This is given by thermal zone driver as part of registration.
-				Eg: "acpitz" indicates it's an ACPI thermal device.
-				In order to keep it consistent with hwmon sys attribute,
-				this should be a short, lowercase string,
-				not containing spaces nor dashes.
-				RO
-				Required
-
-temp				Current temperature as reported by thermal zone (sensor)
-				Unit: millidegree Celsius
-				RO
-				Required
-
-mode				One of the predefined values in [kernel, user]
-				This file gives information about the algorithm
-				that is currently managing the thermal zone.
-				It can be either default kernel based algorithm
-				or user space application.
-				RW
-				Optional
-				kernel	= Thermal management in kernel thermal zone driver.
-				user	= Preventing kernel thermal zone driver actions upon
-					  trip points so that user application can take full
-					  charge of the thermal management.
-
-trip_point_[0-*]_temp		The temperature above which trip point will be fired
-				Unit: millidegree Celsius
-				RO
-				Optional
-
-trip_point_[0-*]_type 		Strings which indicate the type of the trip point
-				E.g. it can be one of critical, hot, passive,
-				    active[0-*] for ACPI thermal zone.
-				RO
-				Optional
-
-cdev[0-*]			Sysfs link to the thermal cooling device node where the sys I/F
-				for cooling device throttling control represents.
-				RO
-				Optional
-
-cdev[0-*]_trip_point		The trip point with which cdev[0-*] is associated in this thermal zone
-				-1 means the cooling device is not associated with any trip point.
-				RO
-				Optional
-
-******************************
-* Cooling device  attributes *
-******************************
-
-type				String which represents the type of device
-				eg: For generic ACPI: this should be "Fan",
-				"Processor" or "LCD"
-				eg. For memory controller device on intel_menlow platform:
-				this should be "Memory controller"
-				RO
-				Required
-
-max_state			The maximum permissible cooling state of this cooling device.
-				RO
-				Required
-
-cur_state			The current cooling state of this cooling device.
-				the value can any integer numbers between 0 and max_state,
-				cur_state == 0 means no cooling
-				cur_state == max_state means the maximum cooling.
-				RW
-				Required
+type
+	Strings which represent the thermal zone type.
+	This is given by thermal zone driver as part of registration.
+	E.g: "acpitz" indicates it's an ACPI thermal device.
+	In order to keep it consistent with hwmon sys attribute; this should
+	be a short, lowercase string, not containing spaces nor dashes.
+	RO, Required
+
+temp
+	Current temperature as reported by thermal zone (sensor).
+	Unit: millidegree Celsius
+	RO, Required
+
+mode
+	One of the predefined values in [kernel, user].
+	This file gives information about the algorithm that is currently
+	managing the thermal zone. It can be either default kernel based
+	algorithm or user space application.
+	kernel	= Thermal management in kernel thermal zone driver.
+	user	= Preventing kernel thermal zone driver actions upon
+		  trip points so that user application can take full
+		  charge of the thermal management.
+	RW, Optional
+
+trip_point_[0-*]_temp
+	The temperature above which trip point will be fired.
+	Unit: millidegree Celsius
+	RO, Optional
+
+trip_point_[0-*]_type
+	Strings which indicate the type of the trip point.
+	E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
+	thermal zone.
+	RO, Optional
+
+cdev[0-*]
+	Sysfs link to the thermal cooling device node where the sys I/F
+	for cooling device throttling control represents.
+	RO, Optional
+
+cdev[0-*]_trip_point
+	The trip point with which cdev[0-*] is associated in this thermal
+	zone; -1 means the cooling device is not associated with any trip
+	point.
+	RO, Optional
+
+passive
+	Attribute is only present for zones in which the passive cooling
+	policy is not supported by native thermal driver. Default is zero
+	and can be set to a temperature (in millidegrees) to enable a
+	passive trip point for the zone. Activation is done by polling with
+	an interval of 1 second.
+	Unit: millidegrees Celsius
+	RW, Optional
+
+*****************************
+* Cooling device attributes *
+*****************************
+
+type
+	String which represents the type of device, e.g:
+	- for generic ACPI: should be "Fan", "Processor" or "LCD"
+	- for memory controller device on intel_menlow platform:
+	  should be "Memory controller".
+	RO, Required
+
+max_state
+	The maximum permissible cooling state of this cooling device.
+	RO, Required
+
+cur_state
+	The current cooling state of this cooling device.
+	The value can any integer numbers between 0 and max_state:
+	- cur_state == 0 means no cooling
+	- cur_state == max_state means the maximum cooling.
+	RW, Required
 
 3. A simple implementation
 
-ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
-If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
-it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
-It has one processor and one fan, which are both registered as thermal_cooling_device.
-If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
-the sys I/F structure will be built like this:
+ACPI thermal zone may support multiple trip points like critical, hot,
+passive, active. If an ACPI thermal zone supports critical, passive,
+active[0] and active[1] at the same time, it may register itself as a
+thermal_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as
+thermal_cooling_device.
+
+If the processor is listed in _PSL method, and the fan is listed in _AL0
+method, the sys I/F structure will be built like this:
 
 /sys/class/thermal:
 
 |thermal_zone1:
-	|-----type:			acpitz
-	|-----temp:			37000
-	|-----mode:			kernel
-	|-----trip_point_0_temp:	100000
-	|-----trip_point_0_type:	critical
-	|-----trip_point_1_temp:	80000
-	|-----trip_point_1_type:	passive
-	|-----trip_point_2_temp:	70000
-	|-----trip_point_2_type:	active0
-	|-----trip_point_3_temp:	60000
-	|-----trip_point_3_type:	active1
-	|-----cdev0:			--->/sys/class/thermal/cooling_device0
-	|-----cdev0_trip_point:		1	/* cdev0 can be used for passive */
-	|-----cdev1:			--->/sys/class/thermal/cooling_device3
-	|-----cdev1_trip_point:		2	/* cdev1 can be used for active[0]*/
+    |---type:			acpitz
+    |---temp:			37000
+    |---mode:			kernel
+    |---trip_point_0_temp:	100000
+    |---trip_point_0_type:	critical
+    |---trip_point_1_temp:	80000
+    |---trip_point_1_type:	passive
+    |---trip_point_2_temp:	70000
+    |---trip_point_2_type:	active0
+    |---trip_point_3_temp:	60000
+    |---trip_point_3_type:	active1
+    |---cdev0:			--->/sys/class/thermal/cooling_device0
+    |---cdev0_trip_point:	1	/* cdev0 can be used for passive */
+    |---cdev1:			--->/sys/class/thermal/cooling_device3
+    |---cdev1_trip_point:	2	/* cdev1 can be used for active[0]*/
 
 |cooling_device0:
-	|-----type:			Processor
-	|-----max_state:		8
-	|-----cur_state:		0
+    |---type:			Processor
+    |---max_state:		8
+    |---cur_state:		0
 
 |cooling_device3:
-	|-----type:			Fan
-	|-----max_state:		2
-	|-----cur_state:		0
+    |---type:			Fan
+    |---max_state:		2
+    |---cur_state:		0
 
 /sys/class/hwmon:
 
 |hwmon0:
-	|-----name:			acpitz
-	|-----temp1_input:		37000
-	|-----temp1_crit:		100000
+    |---name:			acpitz
+    |---temp1_input:		37000
+    |---temp1_crit:		100000
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index 8e679ef5b23..a4471e3d385 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -103,9 +103,9 @@
 
 #define ACPI_MAX_REFERENCE_COUNT        0x1000
 
-/* Size of cached memory mapping for system memory operation region */
+/* Default page size for use in mapping memory for operation regions */
 
-#define ACPI_SYSMEM_REGION_WINDOW_SIZE  4096
+#define ACPI_DEFAULT_PAGE_SIZE          4096	/* Must be power of 2 */
 
 /* owner_id tracking. 8 entries allows for 255 owner_ids */
 
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 3a54b737d2d..2bd83ac57c3 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function,
 	void *logical_addr_ptr = NULL;
 	struct acpi_mem_space_context *mem_info = region_context;
 	u32 length;
-	acpi_size window_size;
+	acpi_size map_length;
+	acpi_size page_boundary_map_length;
 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
 	u32 remainder;
 #endif
@@ -144,25 +145,39 @@ acpi_ex_system_memory_space_handler(u32 function,
 		}
 
 		/*
-		 * Don't attempt to map memory beyond the end of the region, and
-		 * constrain the maximum mapping size to something reasonable.
+		 * Attempt to map from the requested address to the end of the region.
+		 * However, we will never map more than one page, nor will we cross
+		 * a page boundary.
 		 */
-		window_size = (acpi_size)
+		map_length = (acpi_size)
 		    ((mem_info->address + mem_info->length) - address);
 
-		if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
-			window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
+		/*
+		 * If mapping the entire remaining portion of the region will cross
+		 * a page boundary, just map up to the page boundary, do not cross.
+		 * On some systems, crossing a page boundary while mapping regions
+		 * can cause warnings if the pages have different attributes
+		 * due to resource management
+		 */
+		page_boundary_map_length =
+		    ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address;
+
+		if (!page_boundary_map_length) {
+			page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE;
+		}
+
+		if (map_length > page_boundary_map_length) {
+			map_length = page_boundary_map_length;
 		}
 
 		/* Create a new mapping starting at the address given */
 
-		mem_info->mapped_logical_address =
-			acpi_os_map_memory((acpi_physical_address) address, window_size);
+		mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length);
 		if (!mem_info->mapped_logical_address) {
 			ACPI_ERROR((AE_INFO,
 				    "Could not map memory at %8.8X%8.8X, size %X",
 				    ACPI_FORMAT_NATIVE_UINT(address),
-				    (u32) window_size));
+				    (u32) map_length));
 			mem_info->mapped_length = 0;
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
@@ -170,7 +185,7 @@ acpi_ex_system_memory_space_handler(u32 function,
 		/* Save the physical address and mapping size */
 
 		mem_info->mapped_physical_address = address;
-		mem_info->mapped_length = window_size;
+		mem_info->mapped_length = map_length;
 	}
 
 	/*
diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c
index e6bfd77986b..2ef7030a0c2 100644
--- a/drivers/acpi/power_meter.c
+++ b/drivers/acpi/power_meter.c
@@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource)
 		return -EINVAL;
 	}
 
-	return data;
+	/* _PTP returns 0 on success, nonzero otherwise */
+	if (data)
+		return -EINVAL;
+
+	return 0;
 }
 
 static ssize_t set_trip(struct device *dev, struct device_attribute *devattr,
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index f8b6f555ba5..d0d25e2e1ce 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file,
 	struct list_head *node, *next;
 	char strbuf[5];
 	char str[5] = "";
-	int len = count;
+	unsigned int len = count;
 	struct acpi_device *found_dev = NULL;
 
 	if (len > 4)
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index c567b46dfa0..ec742a4e563 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier =
 	    .notifier_call = acpi_cpu_soft_notify,
 };
 
-static int acpi_processor_add(struct acpi_device *device)
+static int __cpuinit acpi_processor_add(struct acpi_device *device)
 {
 	struct acpi_processor *pr = NULL;
 	int result = 0;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 4c6c14c1e30..1c5d7a8b2fd 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
 	int result = 0;
 	struct acpi_processor_throttling *pthrottling;
 
+	if (!pr)
+		return -EINVAL;
+
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
 			  pr->throttling.address,
 			  pr->throttling.duty_offset,
 			  pr->throttling.duty_width));
 
-	if (!pr)
-		return -EINVAL;
-
 	/*
 	 * Evaluate _PTC, _TSS and _TPC
 	 * They must all be present or none of them can be used.
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index a90afcc723a..4cc1b8116e7 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -413,6 +413,30 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		},
 	},
 	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Hewlett-Packard Pavilion dv4",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"),
+		},
+	},
+	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Hewlett-Packard Pavilion dv7",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"),
+		},
+	},
+	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"),
+		},
+	},
+	{
 	.callback = init_old_suspend_ordering,
 	.ident = "Panasonic CF51-2L",
 	.matches = {
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 64e3c581b7a..05dff631591 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1223,7 +1223,7 @@ acpi_video_device_write_state(struct file *file,
 	u32 state = 0;
 
 
-	if (!dev || count + 1 > sizeof str)
+	if (!dev || count >= sizeof(str))
 		return -EINVAL;
 
 	if (copy_from_user(str, buffer, count))
@@ -1280,7 +1280,7 @@ acpi_video_device_write_brightness(struct file *file,
 	int i;
 
 
-	if (!dev || !dev->brightness || count + 1 > sizeof str)
+	if (!dev || !dev->brightness || count >= sizeof(str))
 		return -EINVAL;
 
 	if (copy_from_user(str, buffer, count))
@@ -1562,7 +1562,7 @@ acpi_video_bus_write_POST(struct file *file,
 	unsigned long long opt, options;
 
 
-	if (!video || count + 1 > sizeof str)
+	if (!video || count >= sizeof(str))
 		return -EINVAL;
 
 	status = acpi_video_bus_POST_options(video, &options);
@@ -1602,7 +1602,7 @@ acpi_video_bus_write_DOS(struct file *file,
 	unsigned long opt;
 
 
-	if (!video || count + 1 > sizeof str)
+	if (!video || count >= sizeof(str))
 		return -EINVAL;
 
 	if (copy_from_user(str, buffer, count))
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index d379e74a05d..4226e535273 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -150,8 +150,6 @@ struct eeepc_hotk {
 /* The actual device the driver binds to */
 static struct eeepc_hotk *ehotk;
 
-static void eeepc_rfkill_hotplug(bool real);
-
 /* Platform device/driver */
 static int eeepc_hotk_thaw(struct device *device);
 static int eeepc_hotk_restore(struct device *device);
@@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void)
 static int eeepc_rfkill_set(void *data, bool blocked)
 {
 	unsigned long asl = (unsigned long)data;
-	int ret;
-
-	if (asl != CM_ASL_WLAN)
-		return set_acpi(asl, !blocked);
-
-	/* hack to avoid panic with rt2860sta */
-	if (blocked)
-		eeepc_rfkill_hotplug(false);
-	ret = set_acpi(asl, !blocked);
-	return ret;
+	return set_acpi(asl, !blocked);
 }
 
 static const struct rfkill_ops eeepc_rfkill_ops = {
@@ -367,7 +356,8 @@ static void __devinit eeepc_enable_camera(void)
 	 * If the following call to set_acpi() fails, it's because there's no
 	 * camera so we can ignore the error.
 	 */
-	set_acpi(CM_ASL_CAMERA, 1);
+	if (get_acpi(CM_ASL_CAMERA) == 0)
+		set_acpi(CM_ASL_CAMERA, 1);
 }
 
 /*
@@ -654,13 +644,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
 	return 0;
 }
 
-static void eeepc_rfkill_hotplug(bool real)
+static void eeepc_rfkill_hotplug(void)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus;
-	bool blocked = real ? eeepc_wlan_rfkill_blocked() : true;
+	bool blocked = eeepc_wlan_rfkill_blocked();
 
-	if (real && ehotk->wlan_rfkill)
+	if (ehotk->wlan_rfkill)
 		rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
 
 	mutex_lock(&ehotk->hotplug_lock);
@@ -703,7 +693,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 	if (event != ACPI_NOTIFY_BUS_CHECK)
 		return;
 
-	eeepc_rfkill_hotplug(true);
+	eeepc_rfkill_hotplug();
 }
 
 static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
@@ -861,7 +851,7 @@ static int eeepc_hotk_restore(struct device *device)
 {
 	/* Refresh both wlan rfkill state and pci hotplug */
 	if (ehotk->wlan_rfkill)
-		eeepc_rfkill_hotplug(true);
+		eeepc_rfkill_hotplug();
 
 	if (ehotk->bluetooth_rfkill)
 		rfkill_set_sw_state(ehotk->bluetooth_rfkill,
@@ -1004,7 +994,7 @@ static void eeepc_rfkill_exit(void)
 	 * Refresh pci hotplug in case the rfkill state was changed after
 	 * eeepc_unregister_rfkill_notifier()
 	 */
-	eeepc_rfkill_hotplug(true);
+	eeepc_rfkill_hotplug();
 	if (ehotk->hotplug_slot)
 		pci_hp_deregister(ehotk->hotplug_slot);
 
@@ -1120,7 +1110,7 @@ static int eeepc_rfkill_init(struct device *dev)
 	 * Refresh pci hotplug in case the rfkill state was changed during
 	 * setup.
 	 */
-	eeepc_rfkill_hotplug(true);
+	eeepc_rfkill_hotplug();
 
 exit:
 	if (result && result != -ENODEV)
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 4e83c297ec9..6f8d8f97121 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -180,15 +180,15 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
 
 	switch (type) {
 	case THERMAL_TRIP_CRITICAL:
-		return sprintf(buf, "critical");
+		return sprintf(buf, "critical\n");
 	case THERMAL_TRIP_HOT:
-		return sprintf(buf, "hot");
+		return sprintf(buf, "hot\n");
 	case THERMAL_TRIP_PASSIVE:
-		return sprintf(buf, "passive");
+		return sprintf(buf, "passive\n");
 	case THERMAL_TRIP_ACTIVE:
-		return sprintf(buf, "active");
+		return sprintf(buf, "active\n");
 	default:
-		return sprintf(buf, "unknown");
+		return sprintf(buf, "unknown\n");
 	}
 }