aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAlex Chiang <achiang@hp.com>2009-02-09 11:16:16 -0700
committerTony Luck <aegl@agluck-desktop.(none)>2009-02-19 11:32:26 -0800
commit66db2e6331612bbec193a358885854330596a92a (patch)
tree337506efc0db57d1e91af7803904195b7c74ac90
parent39d481cba27809598e755e184bc0d8ae1d22423e (diff)
[IA64] Revert "prevent ia64 from invoking irq handlers on offline CPUs"
This reverts commit e7b140365b86aaf94374214c6f4e6decbee2eb0a. Commit e7b14036 removes the targetted disabled CPU from the cpu_online_map after calls to migrate_platform_irqs and fixup_irqs. Paul McKenney states that the reasoning behind the patch was to prevent irq handlers from running on CPUs marked offline because: RCU happily ignores CPUs that don't have their bits set in cpu_online_map, so if there are RCU read-side critical sections in the irq handlers being run, RCU will ignore them. If the other CPUs were running, they might sequence through the RCU state machine, which could result in data structures being yanked out from under those irq handlers, which in turn could result in oopses or worse. Unfortunately, both ia64 functions above look at cpu_online_map to find a new CPU to migrate interrupts onto. This means we can potentially migrate an interrupt off ourself back to... ourself. Uh oh. This causes an oops when we finally try to process pending interrupts on the CPU we want to disable. The oops results from calling __do_IRQ with a NULL pt_regs: Unable to handle kernel NULL pointer dereference (address 0000000000000040) Call Trace: [<a000000100016930>] show_stack+0x50/0xa0 sp=e0000009c922fa00 bsp=e0000009c92214d0 [<a0000001000171a0>] show_regs+0x820/0x860 sp=e0000009c922fbd0 bsp=e0000009c9221478 [<a00000010003c700>] die+0x1a0/0x2e0 sp=e0000009c922fbd0 bsp=e0000009c9221438 [<a0000001006e92f0>] ia64_do_page_fault+0x950/0xa80 sp=e0000009c922fbd0 bsp=e0000009c92213d8 [<a00000010000c7a0>] ia64_native_leave_kernel+0x0/0x270 sp=e0000009c922fc60 bsp=e0000009c92213d8 [<a0000001000ecdb0>] profile_tick+0xd0/0x1c0 sp=e0000009c922fe30 bsp=e0000009c9221398 [<a00000010003bb90>] timer_interrupt+0x170/0x3e0 sp=e0000009c922fe30 bsp=e0000009c9221330 [<a00000010013a800>] handle_IRQ_event+0x80/0x120 sp=e0000009c922fe30 bsp=e0000009c92212f8 [<a00000010013aa00>] __do_IRQ+0x160/0x4a0 sp=e0000009c922fe30 bsp=e0000009c9221290 [<a000000100012290>] ia64_process_pending_intr+0x2b0/0x360 sp=e0000009c922fe30 bsp=e0000009c9221208 [<a0000001000112d0>] fixup_irqs+0xf0/0x2a0 sp=e0000009c922fe30 bsp=e0000009c92211a8 [<a00000010005bd80>] __cpu_disable+0x140/0x240 sp=e0000009c922fe30 bsp=e0000009c9221168 [<a0000001006c5870>] take_cpu_down+0x50/0xa0 sp=e0000009c922fe30 bsp=e0000009c9221148 [<a000000100122610>] stop_cpu+0xd0/0x200 sp=e0000009c922fe30 bsp=e0000009c92210f0 [<a0000001000e0440>] kthread+0xc0/0x140 sp=e0000009c922fe30 bsp=e0000009c92210c8 [<a000000100014ab0>] kernel_thread_helper+0xd0/0x100 sp=e0000009c922fe30 bsp=e0000009c92210a0 [<a00000010000a4c0>] start_kernel_thread+0x20/0x40 sp=e0000009c922fe30 bsp=e0000009c92210a0 I don't like this revert because it is fragile. ia64 is getting lucky because we seem to only ever process timer interrupts in this path, but if we ever race with an IPI here, we definitely use RCU and have the potential of hitting an oops that Paul describes above. Patching ia64's timer_interrupt() to check for NULL pt_regs is insufficient though, as we still hit the above oops. As a short term solution, I do think that this revert is the right answer. The revert hold up under repeated testing (24+ hour test runs) with this setup: - 8-way rx6600 - randomly toggling CPU online/offline state every 2 seconds - running CPU exercisers, memory hog, disk exercisers, and network stressors - average system load around ~160 In the long term, we really need to figure out why we set pt_regs = NULL in ia64_process_pending_intr(). If it turns out that it is unnecessary to do so, then we could safely re-introduce e7b14036 (along with some other logic to be smarter about migrating interrupts). One final note: x86 also removes the disabled CPU from cpu_online_map and then re-enables interrupts for 1ms, presumably to handle any pending interrupts: arch/x86/kernel/irq_32.c (and irq_64.c): cpu_disable_common: [remove cpu from cpu_online_map] fixup_irqs(): for_each_irq: [break CPU affinities] local_irq_enable(); mdelay(1); local_irq_disable(); So they are doing implicitly what ia64 is doing explicitly. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Tony Luck <aegl@agluck-desktop.(none)>
-rw-r--r--arch/ia64/kernel/smpboot.c4
1 files changed, 3 insertions, 1 deletions
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 11463994a7d..2ec5bbff461 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -736,14 +736,16 @@ int __cpu_disable(void)
return -EBUSY;
}
+ cpu_clear(cpu, cpu_online_map);
+
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
return (-EBUSY);
}
remove_siblinginfo(cpu);
- fixup_irqs();
cpu_clear(cpu, cpu_online_map);
+ fixup_irqs();
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;