aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLarry Finger <Larry.Finger@lwfinger.net>2008-07-28 22:25:08 -0500
committerJohn W. Linville <linville@tuxdriver.com>2008-07-29 16:55:08 -0400
commit0ccd58fc03f40529f66190b1a41e92a732d2bda8 (patch)
tree6b1cb0b32489a2ef00f654be896744816f6a5a5c
parent1f690d7b549ef9c7424536475501885dd5b54930 (diff)
rtl8187: Improve wireless statistics for RTL8187B
Wireless statistics produced by the RTL8187B driver are not particularly informative about the strength of the received signal. From the data sheet provided by Realtek, I discovered that certain parts of the RX header should have the information necessary to calculate signal quality and strength. With testing, it became clear that most of these quantities were very jittery - only the AGC correlated with the signals expected from nearby AP's. As a result, the quality and strength are derived from the agc value. The scaling has been determined so that the numbers are close to those obtained by b43 under the same conditions. The results are qualitatively correct. Statistics derived for the RTL8187 have not been changed. The RX header variables have been renamed to match the quantites described in the Realtek data sheet. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-rw-r--r--drivers/net/wireless/rtl8187.h10
-rw-r--r--drivers/net/wireless/rtl8187_dev.c78
2 files changed, 54 insertions, 34 deletions
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
index 8961901b5c0..1b0d750f662 100644
--- a/drivers/net/wireless/rtl8187.h
+++ b/drivers/net/wireless/rtl8187.h
@@ -47,11 +47,13 @@ struct rtl8187_rx_hdr {
struct rtl8187b_rx_hdr {
__le32 flags;
__le64 mac_time;
- u8 noise;
- u8 signal;
+ u8 sq;
+ u8 rssi;
u8 agc;
- u8 reserved;
- __le32 unused;
+ u8 flags2;
+ __le16 snr_long2end;
+ s8 pwdb_g12;
+ u8 fot;
} __attribute__((packed));
/* {rtl8187,rtl8187b}_tx_info is in skb */
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index 7ff03aca251..177988efd66 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -272,6 +272,7 @@ static void rtl8187_rx_cb(struct urb *urb)
struct ieee80211_rx_status rx_status = { 0 };
int rate, signal;
u32 flags;
+ u32 quality;
spin_lock(&priv->rx_queue.lock);
if (skb->next)
@@ -295,44 +296,57 @@ static void rtl8187_rx_cb(struct urb *urb)
flags = le32_to_cpu(hdr->flags);
signal = hdr->signal & 0x7f;
rx_status.antenna = (hdr->signal >> 7) & 1;
- rx_status.signal = signal;
rx_status.noise = hdr->noise;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
- priv->signal = signal;
priv->quality = signal;
+ rx_status.qual = priv->quality;
priv->noise = hdr->noise;
+ rate = (flags >> 20) & 0xF;
+ if (rate > 3) { /* OFDM rate */
+ if (signal > 90)
+ signal = 90;
+ else if (signal < 25)
+ signal = 25;
+ signal = 90 - signal;
+ } else { /* CCK rate */
+ if (signal > 95)
+ signal = 95;
+ else if (signal < 30)
+ signal = 30;
+ signal = 95 - signal;
+ }
+ rx_status.signal = signal;
+ priv->signal = signal;
} else {
struct rtl8187b_rx_hdr *hdr =
(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+ /* The Realtek datasheet for the RTL8187B shows that the RX
+ * header contains the following quantities: signal quality,
+ * RSSI, AGC, the received power in dB, and the measured SNR.
+ * In testing, none of these quantities show qualitative
+ * agreement with AP signal strength, except for the AGC,
+ * which is inversely proportional to the strength of the
+ * signal. In the following, the quality and signal strength
+ * are derived from the AGC. The arbitrary scaling constants
+ * are chosen to make the results close to the values obtained
+ * for a BCM4312 using b43 as the driver. The noise is ignored
+ * for now.
+ */
flags = le32_to_cpu(hdr->flags);
- signal = hdr->agc >> 1;
- rx_status.antenna = (hdr->signal >> 7) & 1;
- rx_status.signal = 64 - min(hdr->noise, (u8)64);
- rx_status.noise = hdr->noise;
+ quality = 170 - hdr->agc;
+ if (quality > 100)
+ quality = 100;
+ signal = 14 - hdr->agc / 2;
+ rx_status.qual = quality;
+ priv->quality = quality;
+ rx_status.signal = signal;
+ priv->signal = signal;
+ rx_status.antenna = (hdr->rssi >> 7) & 1;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
- priv->signal = hdr->signal;
- priv->quality = hdr->agc >> 1;
- priv->noise = hdr->noise;
+ rate = (flags >> 20) & 0xF;
}
skb_trim(skb, flags & 0x0FFF);
- rate = (flags >> 20) & 0xF;
- if (rate > 3) { /* OFDM rate */
- if (signal > 90)
- signal = 90;
- else if (signal < 25)
- signal = 25;
- signal = 90 - signal;
- } else { /* CCK rate */
- if (signal > 95)
- signal = 95;
- else if (signal < 30)
- signal = 30;
- signal = 95 - signal;
- }
-
- rx_status.qual = priv->quality;
- rx_status.signal = signal;
rx_status.rate_idx = rate;
rx_status.freq = dev->conf.channel->center_freq;
rx_status.band = dev->conf.channel->band;
@@ -1030,9 +1044,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
priv->mode = IEEE80211_IF_TYPE_MNTR;
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SIGNAL_UNSPEC;
- dev->max_signal = 65;
+ IEEE80211_HW_RX_INCLUDES_FCS;
eeprom.data = dev;
eeprom.register_read = rtl8187_eeprom_register_read;
@@ -1147,10 +1159,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
(*channel++).hw_value = txpwr >> 8;
}
- if (priv->is_rtl8187b)
+ if (priv->is_rtl8187b) {
printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
"is EXPERIMENTAL, and could damage your\n"
" hardware, use at your own risk\n");
+ dev->flags |= IEEE80211_HW_SIGNAL_DBM;
+ } else {
+ dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
+ dev->max_signal = 65;
+ }
+
if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
" info!\n");