[CPUFREQ] Enhanced PowerSaver driver

This is driver for Enhanced Powersaver which is present in VIA C7
processors. Beta tested by Jorgen (jorgen (at) greven dot dk).
Thanks! Based on documentation provided by Dave Jones (Thanks!)
and C7 Eden datasheet available from www.via.com.tw. Looks like all
these C7 Eden CPU's don't have P-states in BIOS. I know that 2
p-states is low, but Jorgen finds it usefull anyway because board
is passive cooled.
There are 3 different types of C7 processors (called brands):
0. C7-M - these processors can set any maultiplier between min and
max, any voltage between min and max.
1. C7 - only min and max states are supported. Voltage is different
for min and max states.
2. Eden - only min and max states are supported. Looks like this
brand can only change multiplier. Voltage seems to be the same for
min and max frequency.

Signed-off-by: Rafal Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>

3 files changed, 344 insertions, 0 deletions

diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index 5299c5bf445..6c52182ca32 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -217,6 +217,15 @@ config X86_LONGHAUL
 
 	  If in doubt, say N.
 
+config X86_E_POWERSAVER
+	tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
+	select CPU_FREQ_TABLE
+	depends on EXPERIMENTAL
+	help
+	  This adds the CPUFreq driver for VIA C7 processors.
+
+	  If in doubt, say N.
+
 comment "shared options"
 
 config X86_ACPI_CPUFREQ_PROC_INTF
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
index 8de3abe322a..560f7760dae 100644
--- a/arch/i386/kernel/cpu/cpufreq/Makefile
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
 obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
 obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
 obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
 obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
 obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
 obj-$(CONFIG_X86_LONGRUN)		+= longrun.o  
diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c
new file mode 100644
index 00000000000..3243725f80c
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c
@@ -0,0 +1,334 @@
+/*
+ *  Based on documentation provided by Dave Jones. Thanks!
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/tsc.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#define EPS_BRAND_C7M	0
+#define EPS_BRAND_C7	1
+#define EPS_BRAND_EDEN	2
+#define EPS_BRAND_C3	3
+
+struct eps_cpu_data {
+	u32 fsb;
+	struct cpufreq_frequency_table freq_table[];
+};
+
+static struct eps_cpu_data *eps_cpu[NR_CPUS];
+
+
+static unsigned int eps_get(unsigned int cpu)
+{
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+
+	if (cpu)
+		return 0;
+	centaur = eps_cpu[cpu];
+	if (centaur == NULL)
+		return 0;
+
+	/* Return current frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	return centaur->fsb * ((lo >> 8) & 0xff);
+}
+
+static int eps_set_state(struct eps_cpu_data *centaur,
+			 unsigned int cpu,
+			 u32 dest_state)
+{
+	struct cpufreq_freqs freqs;
+	u32 lo, hi;
+	int err = 0;
+	int i;
+
+	freqs.old = eps_get(cpu);
+	freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff);
+	freqs.cpu = cpu;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Wait while CPU is busy */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	i = 0;
+	while (lo & ((1 << 16) | (1 << 17))) {
+		udelay(16);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 64)) {
+			err = -ENODEV;
+			goto postchange;
+		}
+	}
+	/* Set new multiplier and voltage */
+	wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0);
+	/* Wait until transition end */
+	i = 0;
+	do {
+		udelay(16);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 64)) {
+			err = -ENODEV;
+			goto postchange;
+		}
+	} while (lo & ((1 << 16) | (1 << 17)));
+
+	/* Return current frequency */
+postchange:
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	return err;
+}
+
+static int eps_target(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int relation)
+{
+	struct eps_cpu_data *centaur;
+	unsigned int newstate = 0;
+	unsigned int cpu = policy->cpu;
+	unsigned int dest_state;
+	int ret;
+
+	if (unlikely(eps_cpu[cpu] == NULL))
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	if (unlikely(cpufreq_frequency_table_target(policy,
+			&eps_cpu[cpu]->freq_table[0],
+			target_freq,
+			relation,
+			&newstate))) {
+		return -EINVAL;
+	}
+
+	/* Make frequency transition */
+	dest_state = centaur->freq_table[newstate].index & 0xffff;
+	ret = eps_set_state(centaur, cpu, dest_state);
+	if (ret)
+		printk(KERN_ERR "eps: Timeout!\n");
+	return ret;
+}
+
+static int eps_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy,
+			&eps_cpu[policy->cpu]->freq_table[0]);
+}
+
+static int eps_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	u32 lo, hi;
+	u64 val;
+	u8 current_multiplier, current_voltage;
+	u8 max_multiplier, max_voltage;
+	u8 min_multiplier, min_voltage;
+	u8 brand;
+	u32 fsb;
+	struct eps_cpu_data *centaur;
+	struct cpufreq_frequency_table *f_table;
+	int k, step, voltage;
+	int ret;
+	int states;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* Check brand */
+	printk("eps: Detected VIA ");
+	rdmsr(0x1153, lo, hi);
+	brand = (((lo >> 2) ^ lo) >> 18) & 3;
+	switch(brand) {
+	case EPS_BRAND_C7M:
+		printk("C7-M\n");
+		break;
+	case EPS_BRAND_C7:
+		printk("C7\n");
+		break;
+	case EPS_BRAND_EDEN:
+		printk("Eden\n");
+		break;
+	case EPS_BRAND_C3:
+		printk("C3\n");
+		return -ENODEV;
+		break;
+	}
+	/* Enable Enhanced PowerSaver */
+	rdmsrl(MSR_IA32_MISC_ENABLE, val);
+	if (!(val & 1 << 16)) {
+		val |= 1 << 16;
+		wrmsrl(MSR_IA32_MISC_ENABLE, val);
+		/* Can be locked at 0 */
+		rdmsrl(MSR_IA32_MISC_ENABLE, val);
+		if (!(val & 1 << 16)) {
+			printk("eps: Can't enable Enhanced PowerSaver\n");
+			return -ENODEV;
+		}
+	}
+
+	/* Print voltage and multiplier */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	current_voltage = lo & 0xff;
+	printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700);
+	current_multiplier = (lo >> 8) & 0xff;
+	printk("eps: Current multiplier = %d\n", current_multiplier);
+
+	/* Print limits */
+	max_voltage = hi & 0xff;
+	printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700);
+	max_multiplier = (hi >> 8) & 0xff;
+	printk("eps: Highest multiplier = %d\n", max_multiplier);
+	min_voltage = (hi >> 16) & 0xff;
+	printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700);
+	min_multiplier = (hi >> 24) & 0xff;
+	printk("eps: Lowest multiplier = %d\n", min_multiplier);
+
+	/* Sanity checks */
+	if (current_multiplier == 0 || max_multiplier == 0
+	    || min_multiplier == 0)
+		return -EINVAL;
+	if (current_multiplier > max_multiplier
+	    || max_multiplier <= min_multiplier)
+		return -EINVAL;
+	if (current_voltage > 0x1c || max_voltage > 0x1c)
+		return -EINVAL;
+	if (max_voltage < min_voltage)
+		return -EINVAL;
+
+	/* Calc FSB speed */
+	fsb = cpu_khz / current_multiplier;
+	/* Calc number of p-states supported */
+	if (brand == EPS_BRAND_C7M)
+		states = max_multiplier - min_multiplier + 1;
+	else
+		states = 2;
+
+	/* Allocate private data and frequency table for current cpu */
+	centaur = kzalloc(sizeof(struct eps_cpu_data)
+		    + (states + 1) * sizeof(struct cpufreq_frequency_table),
+		    GFP_KERNEL);
+	if (!centaur)
+		return -ENOMEM;
+	eps_cpu[0] = centaur;
+
+	/* Copy basic values */
+	centaur->fsb = fsb;
+
+	/* Fill frequency and MSR value table */
+	f_table = &centaur->freq_table[0];
+	if (brand == EPS_BRAND_EDEN) {
+		f_table[0].frequency = fsb * min_multiplier;
+		f_table[0].index = (min_multiplier << 8) | min_voltage;
+		f_table[1].frequency = fsb * max_multiplier;
+		f_table[1].index = (max_multiplier << 8) | max_voltage;
+		f_table[2].frequency = CPUFREQ_TABLE_END;
+	} else {
+		k = 0;
+		step = ((max_voltage - min_voltage) * 256)
+			/ (max_multiplier - min_multiplier);
+		for (i = min_multiplier; i <= max_multiplier; i++) {
+			voltage = (k * step) / 256 + min_voltage;
+			f_table[k].frequency = fsb * i;
+			f_table[k].index = (i << 8) | voltage;
+			k++;
+		}
+		f_table[k].frequency = CPUFREQ_TABLE_END;
+	}
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
+	policy->cur = fsb * current_multiplier;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, &centaur->freq_table[0]);
+	if (ret) {
+		kfree(centaur);
+		return ret;
+	}
+
+	cpufreq_frequency_table_get_attr(&centaur->freq_table[0], policy->cpu);
+	return 0;
+}
+
+static int eps_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+
+	if (eps_cpu[cpu] == NULL)
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	/* Get max frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	/* Set max frequency */
+	eps_set_state(centaur, cpu, hi & 0xffff);
+	/* Bye */
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	kfree(eps_cpu[cpu]);
+	eps_cpu[cpu] = NULL;
+	return 0;
+}
+
+static struct freq_attr* eps_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver eps_driver = {
+	.verify		= eps_verify,
+	.target		= eps_target,
+	.init		= eps_cpu_init,
+	.exit		= eps_cpu_exit,
+	.get		= eps_get,
+	.name		= "e_powersaver",
+	.owner		= THIS_MODULE,
+	.attr		= eps_attr,
+};
+
+static int __init eps_init(void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+
+	/* This driver will work only on Centaur C7 processors with
+	 * Enhanced SpeedStep/PowerSaver registers */
+	if (c->x86_vendor != X86_VENDOR_CENTAUR
+	    || c->x86 != 6 || c->x86_model != 10)
+		return -ENODEV;
+	if (!cpu_has(c, X86_FEATURE_EST))
+		return -ENODEV;
+
+	if (cpufreq_register_driver(&eps_driver))
+		return -EINVAL;
+	return 0;
+}
+
+static void __exit eps_exit(void)
+{
+	cpufreq_unregister_driver(&eps_driver);
+}
+
+MODULE_AUTHOR("Rafał Bilski <rafalbilski@interia.pl>");
+MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
+MODULE_LICENSE("GPL");
+
+module_init(eps_init);
+module_exit(eps_exit);