Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/ide-2.6

6 files changed, 81 insertions, 63 deletions

diff --git a/Documentation/cdrom/ide-cd b/Documentation/cdrom/ide-cd
index 2c558cd6c1e..f4dc9de2694 100644
--- a/Documentation/cdrom/ide-cd
+++ b/Documentation/cdrom/ide-cd
@@ -159,42 +159,7 @@ two arguments:  the CDROM device, and the slot number to which you wish
 to change.  If the slot number is -1, the drive is unloaded.
 
 
-4. Compilation options
-----------------------
-
-There are a few additional options which can be set when compiling the
-driver.  Most people should not need to mess with any of these; they
-are listed here simply for completeness.  A compilation option can be
-enabled by adding a line of the form `#define <option> 1' to the top
-of ide-cd.c.  All these options are disabled by default.
-
-VERBOSE_IDE_CD_ERRORS
-  If this is set, ATAPI error codes will be translated into textual
-  descriptions.  In addition, a dump is made of the command which
-  provoked the error.  This is off by default to save the memory used
-  by the (somewhat long) table of error descriptions.  
-
-STANDARD_ATAPI
-  If this is set, the code needed to deal with certain drives which do
-  not properly implement the ATAPI spec will be disabled.  If you know
-  your drive implements ATAPI properly, you can turn this on to get a
-  slightly smaller kernel.
-
-NO_DOOR_LOCKING
-  If this is set, the driver will never attempt to lock the door of
-  the drive.
-
-CDROM_NBLOCKS_BUFFER
-  This sets the size of the buffer to be used for a CDROMREADAUDIO
-  ioctl.  The default is 8.
-
-TEST
-  This currently enables an additional ioctl which enables a user-mode
-  program to execute an arbitrary packet command.  See the source for
-  details.  This should be left off unless you know what you're doing.
-
-
-5. Common problems
+4. Common problems
 ------------------
 
 This section discusses some common problems encountered when trying to
@@ -371,7 +336,7 @@ f. Data corruption.
     expense of low system performance.
 
 
-6. cdchange.c
+5. cdchange.c
 -------------
 
 /*
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index c7d46a3d347..d2b8b272bc2 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -606,7 +606,7 @@ static void cmd640_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 }
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
-static void cmd640_init_dev(ide_drive_t *drive)
+static void __init cmd640_init_dev(ide_drive_t *drive)
 {
 	unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);
 
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 26b6c0a1f77..4a697a238e2 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -65,6 +65,8 @@ static struct cardinfo icside_cardinfo_v6_2 = {
 };
 
 struct icside_state {
+	unsigned int channel;
+	unsigned int enabled;
 	void __iomem *irq_port;
 	void __iomem *ioc_base;
 	unsigned int sel;
@@ -114,11 +116,18 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
 	struct icside_state *state = ec->irq_data;
 	void __iomem *base = state->irq_port;
 
-	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
-	readb(base + ICS_ARCIN_V6_INTROFFSET_2);
+	state->enabled = 1;
 
-	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
-	readb(base + ICS_ARCIN_V6_INTROFFSET_1);
+	switch (state->channel) {
+	case 0:
+		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+		readb(base + ICS_ARCIN_V6_INTROFFSET_2);
+		break;
+	case 1:
+		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+		readb(base + ICS_ARCIN_V6_INTROFFSET_1);
+		break;
+	}
 }
 
 /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
@@ -128,6 +137,8 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
 {
 	struct icside_state *state = ec->irq_data;
 
+	state->enabled = 0;
+
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
 }
@@ -149,6 +160,44 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
 	.irqpending	= icside_irqpending_arcin_v6,
 };
 
+/*
+ * Handle routing of interrupts.  This is called before
+ * we write the command to the drive.
+ */
+static void icside_maskproc(ide_drive_t *drive, int mask)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
+	struct icside_state *state = ecard_get_drvdata(ec);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	state->channel = hwif->channel;
+
+	if (state->enabled && !mask) {
+		switch (hwif->channel) {
+		case 0:
+			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+			break;
+		case 1:
+			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+			break;
+		}
+	} else {
+		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+	}
+
+	local_irq_restore(flags);
+}
+
+static const struct ide_port_ops icside_v6_no_dma_port_ops = {
+	.maskproc		= icside_maskproc,
+};
+
 #ifdef CONFIG_BLK_DEV_IDEDMA_ICS
 /*
  * SG-DMA support.
@@ -229,6 +278,7 @@ static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 static const struct ide_port_ops icside_v6_port_ops = {
 	.set_dma_mode		= icside_set_dma_mode,
+	.maskproc		= icside_maskproc,
 };
 
 static void icside_dma_host_set(ide_drive_t *drive, int on)
@@ -273,6 +323,11 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 	BUG_ON(dma_channel_active(ec->dma));
 
 	/*
+	 * Ensure that we have the right interrupt routed.
+	 */
+	icside_maskproc(drive, 0);
+
+	/*
 	 * Route the DMA signals to the correct interface.
 	 */
 	writeb(state->sel | hwif->channel, state->ioc_base);
@@ -400,6 +455,7 @@ err_free:
 
 static const struct ide_port_info icside_v6_port_info __initdata = {
 	.init_dma		= icside_dma_off_init,
+	.port_ops		= &icside_v6_no_dma_port_ops,
 	.dma_ops		= &icside_v6_dma_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
 	.mwdma_mask		= ATA_MWDMA2,
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index dd6396384c2..ab87e4f7cec 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -121,19 +121,11 @@ static int ide_probe(struct pcmcia_device *link)
 static void ide_detach(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
-    ide_hwif_t *hwif = info->host->ports[0];
-    unsigned long data_addr, ctl_addr;
 
     dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
 
-    data_addr = hwif->io_ports.data_addr;
-    ctl_addr  = hwif->io_ports.ctl_addr;
-
     ide_release(link);
 
-    release_region(ctl_addr, 1);
-    release_region(data_addr, 8);
-
     kfree(info);
 } /* ide_detach */
 
@@ -354,12 +346,19 @@ static void ide_release(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
 
-    if (info->ndev)
-	/* FIXME: if this fails we need to queue the cleanup somehow
-	   -- need to investigate the required PCMCIA magic */
+    if (info->ndev) {
+	ide_hwif_t *hwif = host->ports[0];
+	unsigned long data_addr, ctl_addr;
+
+	data_addr = hwif->io_ports.data_addr;
+	ctl_addr = hwif->io_ports.ctl_addr;
+
 	ide_host_remove(host);
+	info->ndev = 0;
 
-    info->ndev = 0;
+	release_region(ctl_addr, 1);
+	release_region(data_addr, 8);
+    }
 
     pcmcia_disable_device(link);
 } /* ide_release */
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 07cd37516ba..c5f3841af36 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -93,13 +93,13 @@ static int pdc202xx_test_irq(ide_hwif_t *hwif)
 		 * bit 7: error, bit 6: interrupting,
 		 * bit 5: FIFO full, bit 4: FIFO empty
 		 */
-		return ((sc1d & 0x50) == 0x40) ? 1 : 0;
+		return ((sc1d & 0x50) == 0x50) ? 1 : 0;
 	} else	{
 		/*
 		 * bit 3: error, bit 2: interrupting,
 		 * bit 1: FIFO full, bit 0: FIFO empty
 		 */
-		return ((sc1d & 0x05) == 0x04) ? 1 : 0;
+		return ((sc1d & 0x05) == 0x05) ? 1 : 0;
 	}
 }
 
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
index e9d4b441d1c..b7f5b0c4310 100644
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -872,20 +872,18 @@ static struct pci_driver scc_pci_driver = {
 	.remove = __devexit_p(scc_remove),
 };
 
-static int scc_ide_init(void)
+static int __init scc_ide_init(void)
 {
 	return ide_pci_register_driver(&scc_pci_driver);
 }
 
-module_init(scc_ide_init);
-/* -- No exit code?
-static void scc_ide_exit(void)
+static void __exit scc_ide_exit(void)
 {
-	ide_pci_unregister_driver(&scc_pci_driver);
+	pci_unregister_driver(&scc_pci_driver);
 }
-module_exit(scc_ide_exit);
- */
 
+module_init(scc_ide_init);
+module_exit(scc_ide_exit);
 
 MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
 MODULE_LICENSE("GPL");