Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

3 files changed, 73 insertions, 0 deletions

diff --git a/Documentation/arm/empeg/README b/Documentation/arm/empeg/README
new file mode 100644
index 00000000000..09cc8d03ae5
--- /dev/null
+++ b/Documentation/arm/empeg/README
@@ -0,0 +1,13 @@
+Empeg, Ltd's Empeg MP3 Car Audio Player
+
+The initial design is to go in your car, but you can use it at home, on a
+boat... almost anywhere. The principle is to store CD-quality music using
+MPEG technology onto a hard disk in the unit, and use the power of the
+embedded computer to serve up the music you want.
+
+For more details, see:
+
+	http://www.empeg.com
+
+
+
diff --git a/Documentation/arm/empeg/ir.txt b/Documentation/arm/empeg/ir.txt
new file mode 100644
index 00000000000..10a29745016
--- /dev/null
+++ b/Documentation/arm/empeg/ir.txt
@@ -0,0 +1,49 @@
+Infra-red driver documentation.
+
+Mike Crowe <mac@empeg.com>
+(C) Empeg Ltd 1999
+
+Not a lot here yet :-)
+
+The Kenwood KCA-R6A remote control generates a sequence like the following:
+
+Go low for approx 16T (Around 9000us)
+Go high for approx 8T (Around 4000us)
+Go low for less than 2T (Around 750us)
+
+For each of the 32 bits
+  Go high for more than 2T (Around 1500us) == 1
+  Go high for less than T (Around 400us) == 0
+  Go low for less than 2T (Around 750us)
+
+Rather than repeat a signal when the button is held down certain buttons
+generate the following code to indicate repetition.
+
+Go low for approx 16T
+Go high for approx 4T
+Go low for less than 2T
+
+(By removing the <2T from the start of the sequence and placing at the end
+ it can be considered a stop bit but I found it easier to deal with it at
+ the start).
+
+The 32 bits are encoded as XxYy where x and y are the actual data values
+while X and Y are the logical inverses of the associated data values. Using 
+LSB first yields sensible codes for the numbers.
+
+All codes are of the form b9xx
+
+The numeric keys generate the code 0x where x is the number pressed.
+
+Tuner		1c
+Tape		1d
+CD		1e
+CD-MD-CH	1f
+Track-		0a
+Track+		0b
+Rewind		0c
+FF		0d
+DNPP		5e
+Play/Pause	0e
+Vol+		14
+Vol-		15
diff --git a/Documentation/arm/empeg/mkdevs b/Documentation/arm/empeg/mkdevs
new file mode 100644
index 00000000000..7a85e28d14f
--- /dev/null
+++ b/Documentation/arm/empeg/mkdevs
@@ -0,0 +1,11 @@
+#!/bin/sh
+mknod /dev/display c 244 0
+mknod /dev/ir c 242 0
+mknod /dev/usb0 c 243 0
+mknod /dev/audio c 245 4
+mknod /dev/dsp c 245 3
+mknod /dev/mixer c 245 0
+mknod /dev/empeg_state c 246 0
+mknod /dev/radio0 c 81 64
+ln -sf radio0 radio
+ln -sf usb0 usb