[PATCH] I2C: Move hwmon drivers (3/3)

Part 3: Move the drivers documentation, plus two general documentation
files.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 57 deletions

diff --git a/Documentation/i2c/chips/lm63 b/Documentation/i2c/chips/lm63
deleted file mode 100644
index 31660bf9797..00000000000
--- a/Documentation/i2c/chips/lm63
+++ /dev/null
@@ -1,57 +0,0 @@
-Kernel driver lm63
-==================
-
-Supported chips:
-  * National Semiconductor LM63
-    Prefix: 'lm63'
-    Addresses scanned: I2C 0x4c
-    Datasheet: Publicly available at the National Semiconductor website
-               http://www.national.com/pf/LM/LM63.html
-
-Author: Jean Delvare <khali@linux-fr.org>
-
-Thanks go to Tyan and especially Alex Buckingham for setting up a remote
-access to their S4882 test platform for this driver.
-  http://www.tyan.com/
-
-Description
------------
-
-The LM63 is a digital temperature sensor with integrated fan monitoring
-and control.
-
-The LM63 is basically an LM86 with fan speed monitoring and control
-capabilities added. It misses some of the LM86 features though:
- - No low limit for local temperature.
- - No critical limit for local temperature.
- - Critical limit for remote temperature can be changed only once. We
-   will consider that the critical limit is read-only.
-
-The datasheet isn't very clear about what the tachometer reading is.
-
-An explanation from National Semiconductor: The two lower bits of the read
-value have to be masked out. The value is still 16 bit in width.
-
-All temperature values are given in degrees Celsius. Resolution is 1.0
-degree for the local temperature, 0.125 degree for the remote temperature.
-
-The fan speed is measured using a tachometer. Contrary to most chips which
-store the value in an 8-bit register and have a selectable clock divider
-to make sure that the result will fit in the register, the LM63 uses 16-bit
-value for measuring the speed of the fan. It can measure fan speeds down to
-83 RPM, at least in theory.
-
-Note that the pin used for fan monitoring is shared with an alert out
-function. Depending on how the board designer wanted to use the chip, fan
-speed monitoring will or will not be possible. The proper chip configuration
-is left to the BIOS, and the driver will blindly trust it.
-
-A PWM output can be used to control the speed of the fan. The LM63 has two
-PWM modes: manual and automatic. Automatic mode is not fully implemented yet
-(you cannot define your custom PWM/temperature curve), and mode change isn't
-supported either.
-
-The lm63 driver will not update its values more frequently than every
-second; reading them more often will do no harm, but will return 'old'
-values.
-