Merge branch 'linux-2.6'

6 files changed, 44 insertions, 53 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 2fc1fb896af..db122df5e77 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -527,29 +527,30 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
 
-	default_blu=	[VT]
+	vt.default_blu=	[VT]
 			Format: <blue0>,<blue1>,<blue2>,...,<blue15>
 			Change the default blue palette of the console.
 			This is a 16-member array composed of values
 			ranging from 0-255.
 
-	default_grn=	[VT]
+	vt.default_grn=	[VT]
 			Format: <green0>,<green1>,<green2>,...,<green15>
 			Change the default green palette of the console.
 			This is a 16-member array composed of values
 			ranging from 0-255.
 
-	default_red=	[VT]
+	vt.default_red=	[VT]
 			Format: <red0>,<red1>,<red2>,...,<red15>
 			Change the default red palette of the console.
 			This is a 16-member array composed of values
 			ranging from 0-255.
 
-	default_utf8=   [VT]
+	vt.default_utf8=
+			[VT]
 			Format=<0|1>
 			Set system-wide default UTF-8 mode for all tty's.
-			Default is 0 and by setting to 1, it enables UTF-8
-			mode for all newly opened or allocated terminals.
+			Default is 1, i.e. UTF-8 mode is enabled for all
+			newly opened terminals.
 
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
@@ -883,6 +884,14 @@ and is between 256 and 4096 characters. It is defined in the file
 	lapic_timer_c2_ok	[X86-32,x86-64,APIC] trust the local apic timer in
 			C2 power state.
 
+	libata.dma=	[LIBATA] DMA control
+			libata.dma=0	  Disable all PATA and SATA DMA
+			libata.dma=1	  PATA and SATA Disk DMA only
+			libata.dma=2	  ATAPI (CDROM) DMA only
+			libata.dma=4	  Compact Flash DMA only 
+			Combinations also work, so libata.dma=3 enables DMA
+			for disks and CDROMs, but not CFs.
+
 	libata.noacpi	[LIBATA] Disables use of ACPI in libata suspend/resume
 			when set.
 			Format: <int>
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index 1a45f11e645..4269a1105b3 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -68,29 +68,6 @@ typedef struct { atomic_long_t a; } local_t;
   variable can be read when reading some _other_ cpu's variables.
 
 
-* Rules to follow when using local atomic operations
-
-- Variables touched by local ops must be per cpu variables.
-- _Only_ the CPU owner of these variables must write to them.
-- This CPU can use local ops from any context (process, irq, softirq, nmi, ...)
-  to update its local_t variables.
-- Preemption (or interrupts) must be disabled when using local ops in
-  process context to   make sure the process won't be migrated to a
-  different CPU between getting the per-cpu variable and doing the
-  actual local op.
-- When using local ops in interrupt context, no special care must be
-  taken on a mainline kernel, since they will run on the local CPU with
-  preemption already disabled. I suggest, however, to explicitly
-  disable preemption anyway to make sure it will still work correctly on
-  -rt kernels.
-- Reading the local cpu variable will provide the current copy of the
-  variable.
-- Reads of these variables can be done from any CPU, because updates to
-  "long", aligned, variables are always atomic. Since no memory
-  synchronization is done by the writer CPU, an outdated copy of the
-  variable can be read when reading some _other_ cpu's variables.
-
-
 * How to use local atomic operations
 
 #include <linux/percpu.h>
diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt
index 4f7da5a2bf4..ea72d2e66ca 100644
--- a/Documentation/networking/driver.txt
+++ b/Documentation/networking/driver.txt
@@ -61,7 +61,10 @@ Transmit path guidelines:
 2) Do not forget to update netdev->trans_start to jiffies after
    each new tx packet is given to the hardware.
 
-3) Do not forget that once you return 0 from your hard_start_xmit
+3) A hard_start_xmit method must not modify the shared parts of a
+   cloned SKB.
+
+4) Do not forget that once you return 0 from your hard_start_xmit
    method, it is your driver's responsibility to free up the SKB
    and in some finite amount of time.
 
diff --git a/Documentation/networking/wavelan.txt b/Documentation/networking/wavelan.txt
index c1acf5eb371..afa6e521c68 100644
--- a/Documentation/networking/wavelan.txt
+++ b/Documentation/networking/wavelan.txt
@@ -12,8 +12,8 @@ and many Linux driver to support it.
 "wavelan" driver (old ISA Wavelan)
 ----------------
 	o Config :	Network device -> Wireless LAN -> AT&T WaveLAN
-	o Location :	.../drivers/net/wavelan*
-	o in-line doc :	.../drivers/net/wavelan.p.h
+	o Location :	.../drivers/net/wireless/wavelan*
+	o in-line doc :	.../drivers/net/wireless/wavelan.p.h
 	o on-line doc :
 	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
 
diff --git a/Documentation/nfsroot.txt b/Documentation/nfsroot.txt
index 9b956a96936..31b32917234 100644
--- a/Documentation/nfsroot.txt
+++ b/Documentation/nfsroot.txt
@@ -97,10 +97,6 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
   autoconfiguration will take place.  The most common way to use this
   is "ip=dhcp".
 
-  Note that "ip=off" is not the same thing as "ip=::::::off", because in
-  the latter autoconfiguration will take place if any of DHCP, BOOTP or RARP
-  are compiled in the kernel.
-
   <client-ip>	IP address of the client.
 
   		Default:  Determined using autoconfiguration.
@@ -149,7 +145,9 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
 		this option.
 
                   off or none: don't use autoconfiguration
+				(do static IP assignment instead)
 		  on or any:   use any protocol available in the kernel
+			       (default)
 		  dhcp:        use DHCP
 		  bootp:       use BOOTP
 		  rarp:        use RARP
diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt
index bb7cb1d31ec..4cc4ba9d715 100644
--- a/Documentation/watchdog/watchdog-api.txt
+++ b/Documentation/watchdog/watchdog-api.txt
@@ -42,23 +42,27 @@ like this source file:  see Documentation/watchdog/src/watchdog-simple.c
 A more advanced driver could for example check that a HTTP server is
 still responding before doing the write call to ping the watchdog.
 
-When the device is closed, the watchdog is disabled.  This is not
-always such a good idea, since if there is a bug in the watchdog
-daemon and it crashes the system will not reboot.  Because of this,
-some of the drivers support the configuration option "Disable watchdog
-shutdown on close", CONFIG_WATCHDOG_NOWAYOUT.  If it is set to Y when
-compiling the kernel, there is no way of disabling the watchdog once
-it has been started.  So, if the watchdog daemon crashes, the system
-will reboot after the timeout has passed. Watchdog devices also usually
-support the nowayout module parameter so that this option can be controlled
-at runtime.
-
-Drivers will not disable the watchdog, unless a specific magic character 'V'
-has been sent /dev/watchdog just before closing the file.  If the userspace
-daemon closes the file without sending this special character, the driver
-will assume that the daemon (and userspace in general) died, and will stop
-pinging the watchdog without disabling it first.  This will then cause a
-reboot if the watchdog is not re-opened in sufficient time.
+When the device is closed, the watchdog is disabled, unless the "Magic
+Close" feature is supported (see below).  This is not always such a
+good idea, since if there is a bug in the watchdog daemon and it
+crashes the system will not reboot.  Because of this, some of the
+drivers support the configuration option "Disable watchdog shutdown on
+close", CONFIG_WATCHDOG_NOWAYOUT.  If it is set to Y when compiling
+the kernel, there is no way of disabling the watchdog once it has been
+started.  So, if the watchdog daemon crashes, the system will reboot
+after the timeout has passed. Watchdog devices also usually support
+the nowayout module parameter so that this option can be controlled at
+runtime.
+
+Magic Close feature:
+
+If a driver supports "Magic Close", the driver will not disable the
+watchdog unless a specific magic character 'V' has been sent to
+/dev/watchdog just before closing the file.  If the userspace daemon
+closes the file without sending this special character, the driver
+will assume that the daemon (and userspace in general) died, and will
+stop pinging the watchdog without disabling it first.  This will then
+cause a reboot if the watchdog is not re-opened in sufficient time.
 
 The ioctl API: