Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 240 insertions, 0 deletions

diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c
new file mode 100644
index 00000000000..78c30decf3f
--- /dev/null
+++ b/arch/alpha/kernel/sys_ruffian.c
@@ -0,0 +1,240 @@
+/*
+ *	linux/arch/alpha/kernel/sys_ruffian.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999, 2000 Richard Henderson
+ *
+ * Code supporting the RUFFIAN.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+#include <asm/8253pit.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+static void __init
+ruffian_init_irq(void)
+{
+	/* Invert 6&7 for i82371 */
+	*(vulp)PYXIS_INT_HILO  = 0x000000c0UL; mb();
+	*(vulp)PYXIS_INT_CNFG  = 0x00002064UL; mb();	 /* all clear */
+
+	outb(0x11,0xA0);
+	outb(0x08,0xA1);
+	outb(0x02,0xA1);
+	outb(0x01,0xA1);
+	outb(0xFF,0xA1);
+	
+	outb(0x11,0x20);
+	outb(0x00,0x21);
+	outb(0x04,0x21);
+	outb(0x01,0x21);
+	outb(0xFF,0x21);
+	
+	/* Finish writing the 82C59A PIC Operation Control Words */
+	outb(0x20,0xA0);
+	outb(0x20,0x20);
+	
+	init_i8259a_irqs();
+
+	/* Not interested in the bogus interrupts (0,3,6),
+	   NMI (1), HALT (2), flash (5), or 21142 (8).  */
+	init_pyxis_irqs(0x16f0000);
+
+	common_init_isa_dma();
+}
+
+#define RUFFIAN_LATCH	((PIT_TICK_RATE + HZ / 2) / HZ)
+
+static void __init
+ruffian_init_rtc(void)
+{
+	/* Ruffian does not have the RTC connected to the CPU timer
+	   interrupt.  Instead, it uses the PIT connected to IRQ 0.  */
+
+	/* Setup interval timer.  */
+	outb(0x34, 0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
+	outb(RUFFIAN_LATCH & 0xff, 0x40);	/* LSB */
+	outb(RUFFIAN_LATCH >> 8, 0x40);		/* MSB */
+
+	outb(0xb6, 0x43);		/* pit counter 2: speaker */
+	outb(0x31, 0x42);
+	outb(0x13, 0x42);
+
+	setup_irq(0, &timer_irqaction);
+}
+
+static void
+ruffian_kill_arch (int mode)
+{
+	cia_kill_arch(mode);
+#if 0
+	/* This only causes re-entry to ARCSBIOS */
+	/* Perhaps this works for other PYXIS as well?  */
+	*(vuip) PYXIS_RESET = 0x0000dead;
+	mb();
+#endif
+}
+
+/*
+ *  Interrupt routing:
+ *
+ *		Primary bus
+ *	  IdSel		INTA	INTB	INTC	INTD
+ * 21052   13		  -	  -	  -	  -
+ * SIO	   14		 23	  -	  -	  -
+ * 21143   15		 44	  -	  -	  -
+ * Slot 0  17		 43	 42	 41	 40
+ *
+ *		Secondary bus
+ *	  IdSel		INTA	INTB	INTC	INTD
+ * Slot 0   8 (18)	 19	 18	 17	 16
+ * Slot 1   9 (19)	 31	 30	 29	 28
+ * Slot 2  10 (20)	 27	 26	 25	 24
+ * Slot 3  11 (21)	 39	 38	 37	 36
+ * Slot 4  12 (22)	 35	 34	 33	 32
+ * 53c875  13 (23)	 20	  -	  -	  -
+ *
+ */
+
+static int __init
+ruffian_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        static char irq_tab[11][5] __initdata = {
+	      /*INT  INTA INTB INTC INTD */
+		{-1,  -1,  -1,  -1,  -1},  /* IdSel 13,  21052	     */
+		{-1,  -1,  -1,  -1,  -1},  /* IdSel 14,  SIO	     */
+		{44,  44,  44,  44,  44},  /* IdSel 15,  21143	     */
+		{-1,  -1,  -1,  -1,  -1},  /* IdSel 16,  none	     */
+		{43,  43,  42,  41,  40},  /* IdSel 17,  64-bit slot */
+		/* the next 6 are actually on PCI bus 1, across the bridge */
+		{19,  19,  18,  17,  16},  /* IdSel  8,  slot 0	     */
+		{31,  31,  30,  29,  28},  /* IdSel  9,  slot 1	     */
+		{27,  27,  26,  25,  24},  /* IdSel 10,  slot 2	     */
+		{39,  39,  38,  37,  36},  /* IdSel 11,  slot 3	     */
+		{35,  35,  34,  33,  32},  /* IdSel 12,  slot 4	     */
+		{20,  20,  20,  20,  20},  /* IdSel 13,  53c875	     */
+        };
+	const long min_idsel = 13, max_idsel = 23, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8 __init
+ruffian_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	int slot, pin = *pinp;
+
+	if (dev->bus->number == 0) {
+		slot = PCI_SLOT(dev->devfn);
+	}		
+	/* Check for the built-in bridge.  */
+	else if (PCI_SLOT(dev->bus->self->devfn) == 13) {
+		slot = PCI_SLOT(dev->devfn) + 10;
+	}
+	else 
+	{
+		/* Must be a card-based bridge.  */
+		do {
+			if (PCI_SLOT(dev->bus->self->devfn) == 13) {
+				slot = PCI_SLOT(dev->devfn) + 10;
+				break;
+			}
+			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+#ifdef BUILDING_FOR_MILO
+/*
+ * The DeskStation Ruffian motherboard firmware does not place
+ * the memory size in the PALimpure area.  Therefore, we use
+ * the Bank Configuration Registers in PYXIS to obtain the size.
+ */
+static unsigned long __init
+ruffian_get_bank_size(unsigned long offset)
+{
+	unsigned long bank_addr, bank, ret = 0;
+  
+	/* Valid offsets are: 0x800, 0x840 and 0x880
+	   since Ruffian only uses three banks.  */
+	bank_addr = (unsigned long)PYXIS_MCR + offset;
+	bank = *(vulp)bank_addr;
+    
+	/* Check BANK_ENABLE */
+	if (bank & 0x01) {
+		static unsigned long size[] __initdata = {
+			0x40000000UL, /* 0x00,   1G */ 
+			0x20000000UL, /* 0x02, 512M */
+			0x10000000UL, /* 0x04, 256M */
+			0x08000000UL, /* 0x06, 128M */
+			0x04000000UL, /* 0x08,  64M */
+			0x02000000UL, /* 0x0a,  32M */
+			0x01000000UL, /* 0x0c,  16M */
+			0x00800000UL, /* 0x0e,   8M */
+			0x80000000UL, /* 0x10,   2G */
+		};
+
+		bank = (bank & 0x1e) >> 1;
+		if (bank < sizeof(size)/sizeof(*size))
+			ret = size[bank];
+	}
+
+	return ret;
+}
+#endif /* BUILDING_FOR_MILO */
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector ruffian_mv __initmv = {
+	.vector_name		= "Ruffian",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_PYXIS_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= PYXIS_DAC_OFFSET,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= pyxis_device_interrupt,
+
+	.init_arch		= pyxis_init_arch,
+	.init_irq		= ruffian_init_irq,
+	.init_rtc		= ruffian_init_rtc,
+	.init_pci		= cia_init_pci,
+	.kill_arch		= ruffian_kill_arch,
+	.pci_map_irq		= ruffian_map_irq,
+	.pci_swizzle		= ruffian_swizzle,
+};
+ALIAS_MV(ruffian)