Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 685 insertions, 0 deletions

diff --git a/arch/arm/mach-omap/mcbsp.c b/arch/arm/mach-omap/mcbsp.c
new file mode 100644
index 00000000000..7c4ad771309
--- /dev/null
+++ b/arch/arm/mach-omap/mcbsp.c
@@ -0,0 +1,685 @@
+/*
+ * linux/arch/arm/omap/mcbsp.c
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Samuel Ortiz <samuel.ortiz@nokia.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/mcbsp.h>
+
+#include <asm/hardware/clock.h>
+
+#ifdef CONFIG_MCBSP_DEBUG
+#define DBG(x...)	printk(x)
+#else
+#define DBG(x...)	do { } while (0)
+#endif
+
+struct omap_mcbsp {
+	u32                          io_base;
+	u8                           id;
+	u8                           free;
+	omap_mcbsp_word_length       rx_word_length;
+	omap_mcbsp_word_length       tx_word_length;
+
+	/* IRQ based TX/RX */
+	int                          rx_irq;
+	int                          tx_irq;
+
+	/* DMA stuff */
+	u8                           dma_rx_sync;
+	short                        dma_rx_lch;
+	u8                           dma_tx_sync;
+	short                        dma_tx_lch;
+
+	/* Completion queues */
+	struct completion            tx_irq_completion;
+	struct completion            rx_irq_completion;
+	struct completion            tx_dma_completion;
+	struct completion            rx_dma_completion;
+
+	spinlock_t                   lock;
+};
+
+static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
+static struct clk *mcbsp_dsp_ck = 0;
+static struct clk *mcbsp_api_ck = 0;
+
+
+static void omap_mcbsp_dump_reg(u8 id)
+{
+	DBG("**** MCBSP%d regs ****\n", mcbsp[id].id);
+	DBG("DRR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
+	DBG("DRR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
+	DBG("DXR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
+	DBG("DXR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
+	DBG("SPCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
+	DBG("SPCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
+	DBG("RCR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
+	DBG("RCR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
+	DBG("XCR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
+	DBG("XCR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
+	DBG("SRGR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
+	DBG("SRGR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
+	DBG("PCR0:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
+	DBG("***********************\n");
+}
+
+
+static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id);
+
+	DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+
+	complete(&mcbsp_tx->tx_irq_completion);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id);
+
+	DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+
+	complete(&mcbsp_rx->rx_irq_completion);
+	return IRQ_HANDLED;
+}
+
+
+static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
+{
+	struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data);
+
+	DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+
+	/* We can free the channels */
+	omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
+	mcbsp_dma_tx->dma_tx_lch = -1;
+
+	complete(&mcbsp_dma_tx->tx_dma_completion);
+}
+
+static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
+{
+	struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data);
+
+	DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+
+	/* We can free the channels */
+	omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
+	mcbsp_dma_rx->dma_rx_lch = -1;
+
+	complete(&mcbsp_dma_rx->rx_dma_completion);
+}
+
+
+/*
+ * omap_mcbsp_config simply write a config to the
+ * appropriate McBSP.
+ * You either call this function or set the McBSP registers
+ * by yourself before calling omap_mcbsp_start().
+ */
+
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config)
+{
+	u32 io_base = mcbsp[id].io_base;
+
+	DBG("OMAP-McBSP: McBSP%d  io_base: 0x%8x\n", id+1, io_base);
+
+	/* We write the given config */
+	OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, config->spcr1);
+	OMAP_MCBSP_WRITE(io_base, RCR2, config->rcr2);
+	OMAP_MCBSP_WRITE(io_base, RCR1, config->rcr1);
+	OMAP_MCBSP_WRITE(io_base, XCR2, config->xcr2);
+	OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1);
+	OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2);
+	OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1);
+	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
+	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
+	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
+}
+
+
+
+static int omap_mcbsp_check(unsigned int id)
+{
+	if (cpu_is_omap730()) {
+		if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
+		       return -1;
+		}
+		return 0;
+	}
+
+	if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
+		if (id > OMAP_MAX_MCBSP_COUNT) {
+			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
+			return -1;
+		}
+		return 0;
+	}
+
+	return -1;
+}
+
+#define EN_XORPCK		1
+#define DSP_RSTCT2              0xe1008014
+
+static void omap_mcbsp_dsp_request(void)
+{
+	if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
+		omap_writew((omap_readw(ARM_RSTCT1) | (1 << 1) | (1 << 2)),
+			    ARM_RSTCT1);
+		clk_enable(mcbsp_dsp_ck);
+		clk_enable(mcbsp_api_ck);
+
+		/* enable 12MHz clock to mcbsp 1 & 3 */
+		__raw_writew(__raw_readw(DSP_IDLECT2) | (1 << EN_XORPCK),
+			     DSP_IDLECT2);
+		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
+			     DSP_RSTCT2);
+	}
+}
+
+static void omap_mcbsp_dsp_free(void)
+{
+	/* Useless for now */
+}
+
+
+int omap_mcbsp_request(unsigned int id)
+{
+	int err;
+
+	if (omap_mcbsp_check(id) < 0)
+		return -EINVAL;
+
+	/*
+	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
+	 * are DSP public peripherals.
+	 */
+	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+		omap_mcbsp_dsp_request();
+
+	spin_lock(&mcbsp[id].lock);
+	if (!mcbsp[id].free) {
+		printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1);
+		spin_unlock(&mcbsp[id].lock);
+		return -1;
+	}
+
+	mcbsp[id].free = 0;
+	spin_unlock(&mcbsp[id].lock);
+
+	/* We need to get IRQs here */
+	err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0,
+			  "McBSP",
+			  (void *) (&mcbsp[id]));
+	if (err != 0) {
+		printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n",
+		       mcbsp[id].tx_irq, mcbsp[id].id);
+		return err;
+	}
+
+	init_completion(&(mcbsp[id].tx_irq_completion));
+
+
+	err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0,
+			  "McBSP",
+			  (void *) (&mcbsp[id]));
+	if (err != 0) {
+		printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n",
+		       mcbsp[id].rx_irq, mcbsp[id].id);
+		free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+		return err;
+	}
+
+	init_completion(&(mcbsp[id].rx_irq_completion));
+	return 0;
+
+}
+
+void omap_mcbsp_free(unsigned int id)
+{
+	if (omap_mcbsp_check(id) < 0)
+		return;
+
+	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+		omap_mcbsp_dsp_free();
+
+	spin_lock(&mcbsp[id].lock);
+	if (mcbsp[id].free) {
+		printk (KERN_ERR "OMAP-McBSP: McBSP%d was not reserved\n", id + 1);
+		spin_unlock(&mcbsp[id].lock);
+		return;
+	}
+
+	mcbsp[id].free = 1;
+	spin_unlock(&mcbsp[id].lock);
+
+	/* Free IRQs */
+	free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id]));
+	free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+}
+
+/*
+ * Here we start the McBSP, by enabling the sample
+ * generator, both transmitter and receivers,
+ * and the frame sync.
+ */
+void omap_mcbsp_start(unsigned int id)
+{
+	u32 io_base;
+	u16 w;
+
+	if (omap_mcbsp_check(id) < 0)
+		return;
+
+	io_base = mcbsp[id].io_base;
+
+	mcbsp[id].rx_word_length = ((OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7);
+	mcbsp[id].tx_word_length = ((OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7);
+
+	/* Start the sample generator */
+	w = OMAP_MCBSP_READ(io_base, SPCR2);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+
+	/* Enable transmitter and receiver */
+	w = OMAP_MCBSP_READ(io_base, SPCR2);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+
+	w = OMAP_MCBSP_READ(io_base, SPCR1);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+
+	udelay(100);
+
+	/* Start frame sync */
+	w = OMAP_MCBSP_READ(io_base, SPCR2);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+
+	/* Dump McBSP Regs */
+	omap_mcbsp_dump_reg(id);
+
+}
+
+void omap_mcbsp_stop(unsigned int id)
+{
+	u32 io_base;
+	u16 w;
+
+	if (omap_mcbsp_check(id) < 0)
+		return;
+
+	io_base = mcbsp[id].io_base;
+
+        /* Reset transmitter */
+	w = OMAP_MCBSP_READ(io_base, SPCR2);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+
+	/* Reset receiver */
+	w = OMAP_MCBSP_READ(io_base, SPCR1);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+
+	/* Reset the sample rate generator */
+	w = OMAP_MCBSP_READ(io_base, SPCR2);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+}
+
+
+/*
+ * IRQ based word transmission.
+ */
+void omap_mcbsp_xmit_word(unsigned int id, u32 word)
+{
+	u32 io_base;
+	omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length;
+
+	if (omap_mcbsp_check(id) < 0)
+		return;
+
+	io_base = mcbsp[id].io_base;
+
+	wait_for_completion(&(mcbsp[id].tx_irq_completion));
+
+	if (word_length > OMAP_MCBSP_WORD_16)
+		OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
+	OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
+}
+
+u32 omap_mcbsp_recv_word(unsigned int id)
+{
+	u32 io_base;
+	u16 word_lsb, word_msb = 0;
+	omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length;
+
+	if (omap_mcbsp_check(id) < 0)
+		return -EINVAL;
+
+	io_base = mcbsp[id].io_base;
+
+	wait_for_completion(&(mcbsp[id].rx_irq_completion));
+
+	if (word_length > OMAP_MCBSP_WORD_16)
+		word_msb = OMAP_MCBSP_READ(io_base, DRR2);
+	word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
+
+	return (word_lsb | (word_msb << 16));
+}
+
+
+/*
+ * Simple DMA based buffer rx/tx routines.
+ * Nothing fancy, just a single buffer tx/rx through DMA.
+ * The DMA resources are released once the transfer is done.
+ * For anything fancier, you should use your own customized DMA
+ * routines and callbacks.
+ */
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+{
+	int dma_tx_ch;
+
+	if (omap_mcbsp_check(id) < 0)
+		return -EINVAL;
+
+	if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback,
+			     &mcbsp[id],
+			     &dma_tx_ch)) {
+		printk("OMAP-McBSP: Unable to request DMA channel for McBSP%d TX. Trying IRQ based TX\n", id+1);
+		return -EAGAIN;
+	}
+	mcbsp[id].dma_tx_lch = dma_tx_ch;
+
+	DBG("TX DMA on channel %d\n", dma_tx_ch);
+
+	init_completion(&(mcbsp[id].tx_dma_completion));
+
+	omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
+				     OMAP_DMA_DATA_TYPE_S16,
+				     length >> 1, 1,
+				     OMAP_DMA_SYNC_ELEMENT);
+
+	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
+				 OMAP_DMA_PORT_TIPB,
+				 OMAP_DMA_AMODE_CONSTANT,
+				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1);
+
+	omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
+				OMAP_DMA_PORT_EMIFF,
+				OMAP_DMA_AMODE_POST_INC,
+				buffer);
+
+	omap_start_dma(mcbsp[id].dma_tx_lch);
+	wait_for_completion(&(mcbsp[id].tx_dma_completion));
+	return 0;
+}
+
+
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+{
+	int dma_rx_ch;
+
+	if (omap_mcbsp_check(id) < 0)
+		return -EINVAL;
+
+	if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback,
+			     &mcbsp[id],
+			     &dma_rx_ch)) {
+		printk("Unable to request DMA channel for McBSP%d RX. Trying IRQ based RX\n", id+1);
+		return -EAGAIN;
+	}
+	mcbsp[id].dma_rx_lch = dma_rx_ch;
+
+	DBG("RX DMA on channel %d\n", dma_rx_ch);
+
+	init_completion(&(mcbsp[id].rx_dma_completion));
+
+	omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
+				     OMAP_DMA_DATA_TYPE_S16,
+				     length >> 1, 1,
+				     OMAP_DMA_SYNC_ELEMENT);
+
+	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
+				OMAP_DMA_PORT_TIPB,
+				OMAP_DMA_AMODE_CONSTANT,
+				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1);
+
+	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
+				 OMAP_DMA_PORT_EMIFF,
+				 OMAP_DMA_AMODE_POST_INC,
+				 buffer);
+
+	omap_start_dma(mcbsp[id].dma_rx_lch);
+	wait_for_completion(&(mcbsp[id].rx_dma_completion));
+	return 0;
+}
+
+
+/*
+ * SPI wrapper.
+ * Since SPI setup is much simpler than the generic McBSP one,
+ * this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
+ * Once this is done, you can call omap_mcbsp_start().
+ */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg)
+{
+	struct omap_mcbsp_reg_cfg mcbsp_cfg;
+
+	if (omap_mcbsp_check(id) < 0)
+		return;
+
+	memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
+
+	/* SPI has only one frame */
+	mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
+	mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
+
+        /* Clock stop mode */
+	if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
+		mcbsp_cfg.spcr1 |= (1 << 12);
+	else
+		mcbsp_cfg.spcr1 |= (3 << 11);
+
+	/* Set clock parities */
+	if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING)
+		mcbsp_cfg.pcr0 |= CLKRP;
+	else
+		mcbsp_cfg.pcr0 &= ~CLKRP;
+
+	if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING)
+		mcbsp_cfg.pcr0 &= ~CLKXP;
+	else
+		mcbsp_cfg.pcr0 |= CLKXP;
+
+	/* Set SCLKME to 0 and CLKSM to 1 */
+	mcbsp_cfg.pcr0 &= ~SCLKME;
+	mcbsp_cfg.srgr2 |= CLKSM;
+
+	/* Set FSXP */
+	if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH)
+		mcbsp_cfg.pcr0 &= ~FSXP;
+	else
+		mcbsp_cfg.pcr0 |= FSXP;
+
+	if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
+		mcbsp_cfg.pcr0 |= CLKXM;
+		mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div -1);
+		mcbsp_cfg.pcr0 |= FSXM;
+		mcbsp_cfg.srgr2 &= ~FSGM;
+		mcbsp_cfg.xcr2 |= XDATDLY(1);
+		mcbsp_cfg.rcr2 |= RDATDLY(1);
+	}
+	else {
+		mcbsp_cfg.pcr0 &= ~CLKXM;
+		mcbsp_cfg.srgr1 |= CLKGDV(1);
+		mcbsp_cfg.pcr0 &= ~FSXM;
+		mcbsp_cfg.xcr2 &= ~XDATDLY(3);
+		mcbsp_cfg.rcr2 &= ~RDATDLY(3);
+	}
+
+	mcbsp_cfg.xcr2 &= ~XPHASE;
+	mcbsp_cfg.rcr2 &= ~RPHASE;
+
+	omap_mcbsp_config(id, &mcbsp_cfg);
+}
+
+
+/*
+ * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
+ * 730 has only 2 McBSP, and both of them are MPU peripherals.
+ */
+struct omap_mcbsp_info {
+	u32 virt_base;
+	u8 dma_rx_sync, dma_tx_sync;
+	u16 rx_irq, tx_irq;
+};
+
+#ifdef CONFIG_ARCH_OMAP730
+static const struct omap_mcbsp_info mcbsp_730[] = {
+	[0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
+		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+		.rx_irq = INT_730_McBSP1RX,
+		.tx_irq = INT_730_McBSP1TX },
+	[1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
+		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+		.rx_irq = INT_730_McBSP2RX,
+		.tx_irq = INT_730_McBSP2TX },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+static const struct omap_mcbsp_info mcbsp_1510[] = {
+	[0] = { .virt_base = OMAP1510_MCBSP1_BASE,
+		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+		.rx_irq = INT_McBSP1RX,
+		.tx_irq = INT_McBSP1TX },
+	[1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
+		.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
+		.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
+		.rx_irq = INT_1510_SPI_RX,
+		.tx_irq = INT_1510_SPI_TX },
+	[2] = { .virt_base = OMAP1510_MCBSP3_BASE,
+		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+		.rx_irq = INT_McBSP3RX,
+		.tx_irq = INT_McBSP3TX },
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static const struct omap_mcbsp_info mcbsp_1610[] = {
+	[0] = { .virt_base = OMAP1610_MCBSP1_BASE,
+		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+		.rx_irq = INT_McBSP1RX,
+		.tx_irq = INT_McBSP1TX },
+	[1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
+		.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
+		.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
+		.rx_irq = INT_1610_McBSP2_RX,
+		.tx_irq = INT_1610_McBSP2_TX },
+	[2] = { .virt_base = OMAP1610_MCBSP3_BASE,
+		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+		.rx_irq = INT_McBSP3RX,
+		.tx_irq = INT_McBSP3TX },
+};
+#endif
+
+static int __init omap_mcbsp_init(void)
+{
+	int mcbsp_count = 0, i;
+	static const struct omap_mcbsp_info *mcbsp_info;
+
+	printk("Initializing OMAP McBSP system\n");
+
+	mcbsp_dsp_ck = clk_get(0, "dsp_ck");
+	if (IS_ERR(mcbsp_dsp_ck)) {
+		printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
+		return PTR_ERR(mcbsp_dsp_ck);
+	}
+	mcbsp_api_ck = clk_get(0, "api_ck");
+	if (IS_ERR(mcbsp_dsp_ck)) {
+		printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
+		return PTR_ERR(mcbsp_api_ck);
+	}
+
+#ifdef CONFIG_ARCH_OMAP730
+	if (cpu_is_omap730()) {
+		mcbsp_info = mcbsp_730;
+		mcbsp_count = ARRAY_SIZE(mcbsp_730);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP1510
+	if (cpu_is_omap1510()) {
+		mcbsp_info = mcbsp_1510;
+		mcbsp_count = ARRAY_SIZE(mcbsp_1510);
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (cpu_is_omap1610() || cpu_is_omap1710()) {
+		mcbsp_info = mcbsp_1610;
+		mcbsp_count = ARRAY_SIZE(mcbsp_1610);
+	}
+#endif
+	for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
+		if (i >= mcbsp_count) {
+			mcbsp[i].io_base = 0;
+			mcbsp[i].free = 0;
+                        continue;
+		}
+		mcbsp[i].id = i + 1;
+		mcbsp[i].free = 1;
+		mcbsp[i].dma_tx_lch = -1;
+		mcbsp[i].dma_rx_lch = -1;
+
+		mcbsp[i].io_base = mcbsp_info[i].virt_base;
+		mcbsp[i].tx_irq = mcbsp_info[i].tx_irq;
+		mcbsp[i].rx_irq = mcbsp_info[i].rx_irq;
+		mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync;
+		mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync;
+		spin_lock_init(&mcbsp[i].lock);
+	}
+
+	return 0;
+}
+
+
+arch_initcall(omap_mcbsp_init);
+
+EXPORT_SYMBOL(omap_mcbsp_config);
+EXPORT_SYMBOL(omap_mcbsp_request);
+EXPORT_SYMBOL(omap_mcbsp_free);
+EXPORT_SYMBOL(omap_mcbsp_start);
+EXPORT_SYMBOL(omap_mcbsp_stop);
+EXPORT_SYMBOL(omap_mcbsp_xmit_word);
+EXPORT_SYMBOL(omap_mcbsp_recv_word);
+EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
+EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
+EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);