ARM: OMAP2: Change 24xx to use new register access

This patch changes 24xx to use new register access, except for clock
framework. Clock framework register access will get updates in the
next patch.

Note that board-*.c files change GPMC (General Purpose Memory Controller)
access to use gpmc_cs_write_reg() instead of accessing the registers
directly. The code also uses gpmc_fck instead of it's parent clock
core_l3_ck for GPMC clock.

The H4 board file also adds h4_init_flash() function, which specify the
flash start and end addresses.

Also note that sleep.S removes some unused registers addresses.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 101 insertions, 10 deletions

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index f125f432cc3..d1915f99a5f 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -19,6 +19,8 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/input.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -26,6 +28,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/gpioexpander.h>
 #include <asm/arch/mux.h>
@@ -36,10 +39,13 @@
 #include <asm/arch/keypad.h>
 #include <asm/arch/menelaus.h>
 #include <asm/arch/dma.h>
-#include "prcm-regs.h"
+#include <asm/arch/gpmc.h>
 
 #include <asm/io.h>
 
+#define H4_FLASH_CS	0
+#define H4_SMC91X_CS	1
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -116,8 +122,6 @@ static struct flash_platform_data h4_flash_data = {
 };
 
 static struct resource h4_flash_resource = {
-	.start		= H4_CS0_BASE,
-	.end		= H4_CS0_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -253,21 +257,107 @@ static struct platform_device *h4_devices[] __initdata = {
 	&h4_lcd_device,
 };
 
+/* 2420 Sysboot setup (2430 is different) */
+static u32 get_sysboot_value(void)
+{
+	return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
+		(OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
+		 OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
+		 OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
+}
+
+/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
+ *
+ * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
+ *  correctly.  The macro needs to look at production_id not just hawkeye.
+ */
+static u32 is_gpmc_muxed(void)
+{
+	u32 mux;
+	mux = get_sysboot_value();
+	if ((mux & 0xF) == 0xd)
+		return 1;	/* NAND config (could be either) */
+	if (mux & 0x2)		/* if mux'ed */
+		return 1;
+	else
+		return 0;
+}
+
 static inline void __init h4_init_debug(void)
 {
+	int eth_cs;
+	unsigned long cs_mem_base;
+	unsigned int muxed, rate;
+	struct clk *gpmc_fck;
+
+	eth_cs	= H4_SMC91X_CS;
+
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
+
+	if (is_gpmc_muxed())
+		muxed = 0x200;
+	else
+		muxed = 0;
+
 	/* Make sure CS1 timings are correct */
-	GPMC_CONFIG1_1 = 0x00011200;
-	GPMC_CONFIG2_1 = 0x001f1f01;
-	GPMC_CONFIG3_1 = 0x00080803;
-	GPMC_CONFIG4_1 = 0x1c091c09;
-	GPMC_CONFIG5_1 = 0x041f1f1f;
-	GPMC_CONFIG6_1 = 0x000004c4;
-	GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
+			  0x00011000 | muxed);
+
+	if (rate >= 160000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else if (rate >= 130000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else {/* rate = 100000000 */
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+	}
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		goto out;
+	}
+
 	udelay(100);
 
 	omap_cfg_reg(M15_24XX_GPIO92);
 	if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
+
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
+}
+
+static void __init h4_init_flash(void)
+{
+	unsigned long base;
+
+	if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
+		printk("Can't request GPMC CS for flash\n");
+		return;
+	}
+	h4_flash_resource.start	= base;
+	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
 static void __init omap_h4_init_irq(void)
@@ -275,6 +365,7 @@ static void __init omap_h4_init_irq(void)
 	omap2_init_common_hw();
 	omap_init_irq();
 	omap_gpio_init();
+	h4_init_flash();
 }
 
 static struct omap_uart_config h4_uart_config __initdata = {