[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx

Patch from Tony Lindgren

This patch adds support for omap24xx series of processors.
The files live in arch/arm/mach-omap2, and share common
files with omap15xx and omap16xx processors in
arch/arm/plat-omap.

Omap24xx support was originally added for 2.6.9 by TI.
This code was then improved and integrated to share common
code with omap15xx and omap16xx processors by various
omap developers, such as Paul Mundt, Juha Yrjola, Imre Deak,
Tony Lindgren, Richard Woodruff, Nishant Menon, Komal Shah
et al.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 180 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
new file mode 100644
index 00000000000..f4df04fe1dd
--- /dev/null
+++ b/arch/arm/mach-omap2/serial.c
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-omap/omap2/serial.c
+ *
+ * OMAP2 serial support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Based off of arch/arm/mach-omap/omap1/serial.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/common.h>
+#include <asm/arch/board.h>
+
+static struct clk * uart1_ick = NULL;
+static struct clk * uart1_fck = NULL;
+static struct clk * uart2_ick = NULL;
+static struct clk * uart2_fck = NULL;
+static struct clk * uart3_ick = NULL;
+static struct clk * uart3_fck = NULL;
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= (char *)IO_ADDRESS(OMAP_UART1_BASE),
+		.mapbase	= (unsigned long)OMAP_UART1_BASE,
+		.irq		= 72,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.membase	= (char *)IO_ADDRESS(OMAP_UART2_BASE),
+		.mapbase	= (unsigned long)OMAP_UART2_BASE,
+		.irq		= 73,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.membase	= (char *)IO_ADDRESS(OMAP_UART3_BASE),
+		.mapbase	= (unsigned long)OMAP_UART3_BASE,
+		.irq		= 74,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.flags		= 0
+	}
+};
+
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+					   int offset)
+{
+	offset <<= up->regshift;
+	return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+				    int value)
+{
+	offset <<= p->regshift;
+	__raw_writeb(value, (unsigned long)(p->membase + offset));
+}
+
+/*
+ * Internal UARTs need to be initialized for the 8250 autoconfig to work
+ * properly. Note that the TX watermark initialization may not be needed
+ * once the 8250.c watermark handling code is merged.
+ */
+static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+{
+	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
+	serial_write_reg(p, UART_OMAP_SCR, 0x08);
+	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
+	serial_write_reg(p, UART_OMAP_SYSC, 0x01);
+}
+
+void __init omap_serial_init()
+{
+	int i;
+	const struct omap_uart_config *info;
+
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+
+	info = omap_get_config(OMAP_TAG_UART,
+			       struct omap_uart_config);
+
+	if (info == NULL)
+		return;
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		struct plat_serial8250_port *p = serial_platform_data + i;
+
+		if (!(info->enabled_uarts & (1 << i))) {
+			p->membase = 0;
+			p->mapbase = 0;
+			continue;
+		}
+
+		switch (i) {
+		case 0:
+			uart1_ick = clk_get(NULL, "uart1_ick");
+			if (IS_ERR(uart1_ick))
+				printk("Could not get uart1_ick\n");
+			else {
+				clk_use(uart1_ick);
+			}
+
+			uart1_fck = clk_get(NULL, "uart1_fck");
+			if (IS_ERR(uart1_fck))
+				printk("Could not get uart1_fck\n");
+			else {
+				clk_use(uart1_fck);
+			}
+			break;
+		case 1:
+			uart2_ick = clk_get(NULL, "uart2_ick");
+			if (IS_ERR(uart2_ick))
+				printk("Could not get uart2_ick\n");
+			else {
+				clk_use(uart2_ick);
+			}
+
+			uart2_fck = clk_get(NULL, "uart2_fck");
+			if (IS_ERR(uart2_fck))
+				printk("Could not get uart2_fck\n");
+			else {
+				clk_use(uart2_fck);
+			}
+			break;
+		case 2:
+			uart3_ick = clk_get(NULL, "uart3_ick");
+			if (IS_ERR(uart3_ick))
+				printk("Could not get uart3_ick\n");
+			else {
+				clk_use(uart3_ick);
+			}
+
+			uart3_fck = clk_get(NULL, "uart3_fck");
+			if (IS_ERR(uart3_fck))
+				printk("Could not get uart3_fck\n");
+			else {
+				clk_use(uart3_fck);
+			}
+			break;
+		}
+
+		omap_serial_reset(p);
+	}
+}
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static int __init omap_init(void)
+{
+	return platform_device_register(&serial_device);
+}
+arch_initcall(omap_init);