Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel

Conflicts:
	arch/arm/Makefile

48 files changed, 4973 insertions, 806 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386a65c..a755eb5e236 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,7 @@ config ARCH_OMAP3430
 	select ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
+	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
@@ -56,6 +56,10 @@ config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3EVM
+	bool "OMAP 3530 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+	bool "OMAP3 Zoom2 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+	bool "OMAP 4430 SDP board"
+	depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 88629a7455a..6226e64d99a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,14 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
-		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
-		clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common				= irq.o sdrc.o
+prcm-common				= prcm.o powerdomain.o
+clock-common				= clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
@@ -20,8 +25,10 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
-obj-y					+= pm.o
+obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
 # Clock framework
@@ -45,6 +52,8 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
@@ -53,8 +62,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
 obj-y					+= usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
+obj-y					+= $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
+obj-y					+= $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 22143651037..9c3fdcdf76c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
 #define SDP2430_CS0_BASE	0x04000000
-#define	SDP2430_FLASH_CS	0
-#define	SDP2430_SMC91X_CS	5
-
-#define SDP2430_ETHR_GPIO_IRQ		149
+#define SECONDARY_LCD_GPIO		147
 
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct resource sdp2430_smc91x_resources[] = {
-	[0] = {
-		.start	= SDP2430_CS0_BASE,
-		.end	= SDP2430_CS0_BASE + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp2430_smc91x_device = {
-	.name		= "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+	.name		= "sdp2430_lcd",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp2430_smc91x_resources),
-	.resource	= sdp2430_smc91x_resources,
 };
 
 static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_smc91x_device,
 	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
-static inline void __init sdp2430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int rate;
-	struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
 
-	eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 5,
+	.gpio_irq	= 149,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
 
-	clk_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-
-	/* Make sure CS1 timings are correct, for 2430 always muxed */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else { /* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
+};
 
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
 
-	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
 
-	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			SDP2430_ETHR_GPIO_IRQ);
-		gpmc_cs_free(eth_cs);
-		goto out;
-	}
-	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
 
-out:
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
 }
 
+#endif
+
 static void __init omap_2430sdp_init_irq(void)
 {
 	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp2430_init_smc91x();
 }
 
 static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
 
 static struct omap_board_config_kernel sdp2430_config[] = {
 	{OMAP_TAG_UART, &sdp2430_uart_config},
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
 
@@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 
 static void __init omap_2430sdp_init(void)
 {
+	int ret;
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void)
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
+	board_smc91x_init();
+
+	/* Turn off secondary LCD backlight */
+	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+	if (ret == 0)
+		gpio_direction_output(SECONDARY_LCD_GPIO, 0);
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed927497212..496a90e4ea7 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,13 @@
 
 #include <mach/control.h>
 #include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
 
+#include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
-#define SDP3430_SMC91X_CS		3
-
 #define SDP3430_TS_GPIO_IRQ_SDPV1	3
 #define SDP3430_TS_GPIO_IRQ_SDPV2	2
 
@@ -56,24 +54,6 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static struct resource sdp3430_smc91x_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp3430_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),
-	.resource	= sdp3430_smc91x_resources,
-};
-
 static int sdp3430_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
 };
 
 static struct platform_device *sdp3430_devices[] __initdata = {
-	&sdp3430_smc91x_device,
 	&sdp3430_lcd_device,
 };
 
-static inline void __init sdp3430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	int eth_gpio = 0;
-
-	eth_cs = SDP3430_SMC91X_CS;
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
-	else
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
-	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
-	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			eth_gpio);
-		return;
-	}
-	gpio_direction_input(eth_gpio);
-}
-
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp3430_init_smc91x();
 }
 
 static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 3,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init();
+	board_smc91x_init();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
new file mode 100644
index 00000000000..57e477bd89c
--- /dev/null
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+	.name		= "sdp4430_lcd",
+	.id		= -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+	&sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp4430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(1);
+#endif
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+	omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_4430sdp_map_io,
+	.init_irq	= omap_4430sdp_init_irq,
+	.init_machine	= omap_4430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0fcda1..d8bc0a7dcb8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
@@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.rows		= 6,
+	.cols		= 6,
+	.keymap		= ldp_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+	[0] = {
+		.code			= KEY_ENTER,
+		.gpio			= 101,
+		.desc			= "enter sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[1] = {
+		.code			= KEY_F1,
+		.gpio			= 102,
+		.desc			= "func 1",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[2] = {
+		.code			= KEY_F2,
+		.gpio			= 103,
+		.desc			= "func 2",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[3] = {
+		.code			= KEY_F3,
+		.gpio			= 104,
+		.desc			= "func 3",
+		.active_low		= 1,
+		.debounce_interval 	= 30,
+	},
+	[4] = {
+		.code			= KEY_F4,
+		.gpio			= 105,
+		.desc			= "func 4",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[5] = {
+		.code			= KEY_LEFT,
+		.gpio			= 106,
+		.desc			= "left sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[6] = {
+		.code			= KEY_RIGHT,
+		.gpio			= 107,
+		.desc			= "right sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[7] = {
+		.code			= KEY_UP,
+		.gpio			= 108,
+		.desc			= "up sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[8] = {
+		.code			= KEY_DOWN,
+		.gpio			= 109,
+		.desc			= "down sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+	.buttons		= ldp_gpio_keys_buttons,
+	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
+	.rep			= 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ldp_gpio_keys,
+	},
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ts_gpio);
+	omap_set_gpio_debounce(ts_gpio, 1);
+	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+	[0] = {
+		/*
+		 * TSC2046 operates at a max freqency of 2MHz, so
+		 * operate slightly below at 1.5MHz
+		 */
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &tsc2046_mcspi_config,
+		.irq			= 0,
+		.platform_data		= &tsc2046_config,
+	},
 };
 
 static inline void __init ldp_init_smsc911x(void)
@@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct platform_device ldp_lcd_device = {
+	.name		= "ldp_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_UART,	&ldp_uart_config },
+	{ OMAP_TAG_LCD,		&ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
+static struct twl4030_madc_platform_data ldp_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ldp_vmmc1_supply,
+};
+
 static struct twl4030_platform_data ldp_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.madc		= &ldp_madc_data,
+	.usb		= &ldp_usb_data,
+	.vmmc1		= &ldp_vmmc1,
 	.gpio		= &ldp_gpio_data,
+	.keypad		= &ldp_kp_twl4030_data,
 };
 
 static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
+static struct platform_device *ldp_devices[] __initdata = {
+	&ldp_smsc911x_device,
+	&ldp_lcd_device,
+	&ldp_gpio_keys_device,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	ts_gpio = 54;
+	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+	spi_register_board_info(ldp_spi_board_info,
+				ARRAY_SIZE(ldp_spi_board_info));
+	ads7846_dev_init();
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
+
+	twl4030_mmc_init(mmc);
+	/* link regulators to MMC adapters */
+	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d1f9a..991ac9c3803 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 
 #include <mach/hardware.h>
@@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = {
 	.resource	= &omap3beagle_nand_resource,
 };
 
+#include "sdram-micron-mt46h32m32lf-6.h"
+
 static struct omap_uart_config omap3_beagle_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
+static struct platform_device omap3_beagle_lcd_device = {
+	.name		= "omap3beagle_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
 static struct gpio_led gpio_leds[];
 
 static int beagle_twl_gpio_setup(struct device *dev,
@@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
+	/* link regulators to MMC adapters */
+	beagle_vmmc1_supply.dev = mmc[0].dev;
+	beagle_vsim_supply.dev = mmc[0].dev;
+
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
@@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
 	.setup		= beagle_twl_gpio_setup,
 };
 
+static struct regulator_consumer_supply beagle_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdvi_supply,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
 	.gpio		= &beagle_gpio_data,
+	.vmmc1		= &beagle_vmmc1,
+	.vsim		= &beagle_vsim,
+	.vdac		= &beagle_vdac,
+	.vpll2		= &beagle_vpll2,
 };
 
 static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct platform_device omap3_beagle_lcd_device = {
-	.name		= "omap3beagle_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
new file mode 100644
index 00000000000..d3cc145814d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO	175
+
+#define OMAP3EVM_ETHR_START	0x2c000000
+#define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_GPIO_IRQ	176
+#define OMAP3EVM_SMC911X_CS	5
+
+static struct resource omap3evm_smc911x_resources[] = {
+	[0] =	{
+		.start	= OMAP3EVM_ETHR_START,
+		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] =	{
+		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
+	.resource	= &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+	int eth_cs;
+	struct clk *l3ck;
+	unsigned int rate;
+
+	eth_cs = OMAP3EVM_SMC911X_CS;
+
+	l3ck = clk_get(NULL, "l3_ck");
+	if (IS_ERR(l3ck))
+		rate = 100000000;
+	else
+		rate = clk_get_rate(l3ck);
+
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+			OMAP3EVM_ETHR_GPIO_IRQ);
+		return;
+	}
+
+	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 63,
+	},
+	{}	/* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "omap3evm::ledb",
+		/* normally not visible (board underside) */
+		.default_trigger	= "default-on",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_cfg_reg(L8_34XX_GPIO63);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/*
+	 * Most GPIOs are for USB OTG.  Some are mostly sent to
+	 * the P2 connector; notably LEDA for the LCD backlight.
+	 */
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	platform_device_register(&leds_gpio);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+	.rows		= 4,
+	.cols		= 4,
+	.keymap		= omap3evm_keymap,
+	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
+	.rep		= 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &omap3evm_kp_data,
+	.madc		= &omap3evm_madc_data,
+	.usb		= &omap3evm_usb_data,
+	.gpio		= &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3evm_twldata,
+	},
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+			ARRAY_SIZE(omap3evm_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+	.name		= "omap3evm_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+	omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs	= 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+	[0] = {
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+	omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+	&omap3_evm_lcd_device,
+	&omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+	omap3_evm_i2c_init();
+
+	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+	spi_register_board_info(omap3evm_spi_board_info,
+				ARRAY_SIZE(omap3evm_spi_board_info));
+
+	omap_serial_init();
+	usb_musb_init();
+	ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_evm_map_io,
+	.init_irq	= omap3_evm_init_irq,
+	.init_machine	= omap3_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c6cf1..e32aa23ce96 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -23,7 +23,11 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,11 +39,154 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
 
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME		127
+
+static struct gpio_led pandora_gpio_leds[] = {
+	{
+		.name			= "pandora::sd1",
+		.default_trigger	= "mmc0",
+		.gpio			= 128,
+	}, {
+		.name			= "pandora::sd2",
+		.default_trigger	= "mmc1",
+		.gpio			= 129,
+	}, {
+		.name			= "pandora::bluetooth",
+		.gpio			= 158,
+	}, {
+		.name			= "pandora::wifi",
+		.gpio			= 159,
+	},
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+	.leds		= pandora_gpio_leds,
+	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_led_data,
+	},
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
+{								\
+	.gpio		= gpio_num,				\
+	.type		= ev_type,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,				\
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
+	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
+	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
+	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
+	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
+	GPIO_BUTTON_LOW(111,	BTN_A,		"a"),
+	GPIO_BUTTON_LOW(106,	BTN_B,		"b"),
+	GPIO_BUTTON_LOW(109,	BTN_X,		"x"),
+	GPIO_BUTTON_LOW(101,	BTN_Y,		"y"),
+	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
+	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
+	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
+	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
+	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
+	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
+	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+	.buttons	= pandora_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_key_info,
+	},
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+	/* set debounce time for GPIO banks 4 and 6 */
+	omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+	/* col, row, code */
+	KEY(0, 0, KEY_9),
+	KEY(0, 1, KEY_0),
+	KEY(0, 2, KEY_BACKSPACE),
+	KEY(0, 3, KEY_O),
+	KEY(0, 4, KEY_P),
+	KEY(0, 5, KEY_K),
+	KEY(0, 6, KEY_L),
+	KEY(0, 7, KEY_ENTER),
+	KEY(1, 0, KEY_8),
+	KEY(1, 1, KEY_7),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_5),
+	KEY(1, 4, KEY_4),
+	KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_2),
+	KEY(1, 7, KEY_1),
+	KEY(2, 0, KEY_I),
+	KEY(2, 1, KEY_U),
+	KEY(2, 2, KEY_Y),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_R),
+	KEY(2, 5, KEY_E),
+	KEY(2, 6, KEY_W),
+	KEY(2, 7, KEY_Q),
+	KEY(3, 0, KEY_J),
+	KEY(3, 1, KEY_H),
+	KEY(3, 2, KEY_G),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_D),
+	KEY(3, 5, KEY_S),
+	KEY(3, 6, KEY_A),
+	KEY(3, 7, KEY_LEFTSHIFT),
+	KEY(4, 0, KEY_N),
+	KEY(4, 1, KEY_B),
+	KEY(4, 2, KEY_V),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_X),
+	KEY(4, 5, KEY_Z),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 7, KEY_COMMA),
+	KEY(5, 0, KEY_M),
+	KEY(5, 1, KEY_SPACE),
+	KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+	.rows		= 8,
+	.cols		= 6,
+	.keymap		= pandora_keypad_map,
+	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
+	.rep		= 1,
+};
+
 static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{
 		.mmc		= 1,
@@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = {
 	.enabled_uarts	= (1 << 2), /* UART3 */
 };
 
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	twl4030_mmc_init(omap3pandora_mmc);
 
+	/* link regulators to MMC adapters */
+	pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+	pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
 	return 0;
 }
 
@@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc2_supply,
+};
+
 static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
 	.usb		= &omap3pandora_usb_data,
+	.vmmc1		= &pandora_vmmc1,
+	.vmmc2		= &pandora_vmmc2,
+	.keypad		= &pandora_kp_data,
 };
 
 static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
 
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
+	&pandora_leds_gpio,
+	&pandora_keys_gpio,
 };
 
 static void __init omap3pandora_init(void)
@@ -201,6 +395,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	pandora_keys_gpio_init();
 	usb_musb_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23bea863..dff5528fbfb 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -45,6 +46,7 @@
 #include <mach/nand.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OVERO_GPIO_BT_XGATE	15
@@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.transceiver	= true,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	twl4030_mmc_init(mmc);
+
+	overo_vmmc1_supply.dev = mmc[0].dev;
+
+	return 0;
+}
+
 static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= overo_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data overo_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
 static struct twl4030_platform_data overo_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
+	.usb		= &overo_usb_data,
+	.vmmc1		= &overo_vmmc1,
 };
 
 static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65950", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &overo_twldata,
@@ -303,7 +360,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-	},
-	{}	/* Terminator */
-};
-
 static void __init overo_init(void)
 {
 	overo_i2c_init();
@@ -350,7 +390,6 @@ static void __init overo_init(void)
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	overo_flash_init();
 	usb_musb_init();
 	overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a7381729645..da93b86234e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,30 +27,13 @@
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
-
-#define SMC91X_CS			1
-#define SMC91X_GPIO_IRQ			54
-#define SMC91X_GPIO_RESET		164
-#define SMC91X_GPIO_PWRDWN		86
-
-static struct resource rx51_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device rx51_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),
-	.resource	= rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3	0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
 
 static int rx51_keymap[] = {
 	KEY(0, 0, KEY_Q),
@@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
 
-static struct platform_device *rx51_peripherals_devices[] = {
-	&rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
-	struct gpmc_timings t;
-	const int t2_r = 45;		/* t2 in Figure 12.10 */
-	const int t2_w = 30;		/* t2 in Figure 12.11 */
-	const int t3 = 15;		/* t3 in Figure 12.10 */
-	const int t5_r = 0;		/* t5 in Figure 12.10 */
-	const int t6_r = 45;		/* t6 in Figure 12.10 */
-	const int t6_w = 0;		/* t6 in Figure 12.11 */
-	const int t7_w = 15;		/* t7 in Figure 12.11 */
-	const int t15 = 12;		/* t15 in Figure 12.2 */
-	const int t20 = 185;		/* t20 in Figure 12.2 */
-
-	memset(&t, 0, sizeof(t));
-
-	t.cs_on = t15;
-	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.adv_on = t3;			/* Figure 12.10 */
-	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */
-	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */
-	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */
-	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */
-	t.rd_cycle = t20;		/* Figure 12.2 */
-	t.wr_cycle = t20;		/* Figure 12.4 */
-	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */
-
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
-	return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
-	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
-	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
-	smc91x_init_gpmc(SMC91X_CS);
-
-	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
-		goto free1;
-
-	gpio_direction_input(SMC91X_GPIO_IRQ);
-	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
-	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
-	if (ret)
-		goto free2;
-	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
-	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
-	if (ret)
-		goto free3;
-	gpio_direction_output(SMC91X_GPIO_RESET, 0);
-	gpio_set_value(SMC91X_GPIO_RESET, 1);
-	msleep(100);
-	gpio_set_value(SMC91X_GPIO_RESET, 0);
-
-	return;
-
-free3:
-	gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
-	gpio_free(SMC91X_GPIO_IRQ);
-free1:
-	gpmc_cs_free(SMC91X_CS);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
 static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
@@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = {
 };
 
 /* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
 	.constraints = {
 		.name			= "VCAM_DIG_18",
 		.min_uV			= 1800000,
@@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = {
 	},
 };
 
+static struct regulator_init_data rx51_vaux3_mmc = {
+	.constraints = {
+		.name			= "VMMC2_30",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc2_supply,
+};
+
 static struct regulator_init_data rx51_vaux4 = {
 	.constraints = {
 		.name			= "VCAM_ANA_28",
@@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = {
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
-	.vaux3			= &rx51_vaux3,
 	.vaux4			= &rx51_vaux4,
 	.vmmc1			= &rx51_vmmc1,
-	.vmmc2			= &rx51_vmmc2,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
 };
@@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 
 static int __init rx51_i2c_init(void)
 {
+	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+	else {
+		rx51_twldata.vaux3 = &rx51_vaux3_cam;
+		rx51_twldata.vmmc2 = &rx51_vmmc2;
+	}
 	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
 			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 	omap_register_i2c_bus(2, 100, NULL, 0);
@@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "log",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x40000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 65,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 1,
+	.gpio_irq	= 54,
+	.gpio_pwrdwn	= 86,
+	.gpio_reset	= 164,
+	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+	omap_cfg_reg(G25_34XX_GPIO86_OUT);
+	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
 
 void __init rx51_peripherals_init(void)
 {
-	platform_add_devices(rx51_peripherals_devices,
-				ARRAY_SIZE(rx51_peripherals_devices));
 	rx51_i2c_init();
-	rx51_init_smc91x();
+	board_onenand_init();
+	board_smc91x_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
new file mode 100644
index 00000000000..bac5c4321ff
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS	7
+#define ZOOM2_SMSC911X_GPIO	158
+#define ZOOM2_QUADUART_CS	3
+#define ZOOM2_QUADUART_GPIO	102
+#define QUART_CLK		1843200
+#define DEBUG_BASE		0x08000000
+#define ZOOM2_ETHR_START	DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+	[0] = {
+		.start	= ZOOM2_ETHR_START,
+		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
+	.resource	= zoom2_smsc911x_resources,
+	.dev		= {
+		.platform_data = &zoom2_smsc911x_config,
+	},
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+	int eth_cs;
+	unsigned long cs_mem_base;
+	int eth_gpio = 0;
+
+	eth_cs = ZOOM2_SMSC911X_CS;
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+		return;
+	}
+
+	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+				eth_gpio);
+		return;
+	}
+	gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase	= 0x10000000,
+		.irq		= OMAP_GPIO_IRQ(102),
+		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= QUART_CLK,
+	}, {
+		.flags		= 0
+	}
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM1,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+	int quart_cs;
+	unsigned long cs_mem_base;
+	int quart_gpio = 0;
+
+	quart_cs = ZOOM2_QUADUART_CS;
+
+	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem"
+				"for Quad UART(TL16CP754C)\n");
+		return;
+	}
+
+	quart_gpio = ZOOM2_QUADUART_GPIO;
+
+	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+								quart_gpio);
+		return;
+	}
+	gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+	int debug_board_detect = 0;
+
+	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+		"board detect\n", debug_board_detect);
+		return 0;
+	}
+	gpio_direction_input(debug_board_detect);
+
+	if (!gpio_get_value(debug_board_detect)) {
+		gpio_free(debug_board_detect);
+		return 0;
+	}
+	return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+	&zoom2_smsc911x_device,
+	&zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+	if (!omap_zoom2_debugboard_detect())
+		return 0;
+
+	zoom2_init_smsc911x();
+	zoom2_init_quaduart();
+	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
new file mode 100644
index 00000000000..bcc0f7632de
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+	{ OMAP_TAG_UART,	&zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &zoom2_twldata,
+	},
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+			ARRAY_SIZE(zoom2_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+	omap_i2c_init();
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap_serial_init();
+	omap_zoom2_debugboard_init();
+	twl4030_mmc_init(mmc);
+	usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_zoom2_map_io,
+	.init_irq	= omap_zoom2_init_irq,
+	.init_machine	= omap_zoom2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 4247a153441..ba528f85749 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk)
 		return;
 
 	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
-		OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+		OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 	/* OCP barrier */
-	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 }
 
 /*
@@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
 
-	printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
-	       clk->name, target_rate);
+	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+		 clk->name, target_rate);
 
 	*new_div = 1;
 
@@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 		/* Sanity check */
 		if (clkr->div <= last_div)
-			printk(KERN_ERR "clock: clksel_rate table not sorted "
+			pr_err("clock: clksel_rate table not sorted "
 			       "for clock %s", clk->name);
 
 		last_div = clkr->div;
@@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	}
 
 	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor for target "
+		pr_err("clock: Could not find divisor for target "
 		       "rate %ld for clock %s parent %s\n", target_rate,
 		       clk->name, clk->parent->name);
 		return ~0;
@@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 	*new_div = clkr->div;
 
-	printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
-	       (clk->parent->rate / clkr->div));
+	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+		 (clk->parent->rate / clkr->div));
 
 	return (clk->parent->rate / clkr->div);
 }
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
-	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
 	if (cpu_is_omap34xx()) {
 		omap2_clk_enable(clk);
 		omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index e4cef333e29..44de0271fc2 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set;
 static struct clk *vclk;
 static struct clk *sclk;
 
+static void __iomem *prcm_clksrc_ctrl;
+
 /*-------------------------------------------------------------------------
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
@@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 
 	return 0;
 }
@@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 }
 
 static const struct clkops clkops_oscck = {
@@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void)
 {
 	u32 div;
 
-	div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	div = __raw_readl(prcm_clksrc_ctrl);
 	div &= OMAP_SYSCLKDIV_MASK;
 	div >>= OMAP_SYSCLKDIV_SHIFT;
 
@@ -714,15 +714,18 @@ int __init omap2_clk_init(void)
 	struct omap_clk *c;
 	u32 clkrate;
 
-	if (cpu_is_omap242x())
+	if (cpu_is_omap242x()) {
+		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_242X;
-	else if (cpu_is_omap2430())
+	} else if (cpu_is_omap2430()) {
+		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_243X;
+	}
 
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
 	propagate_rate(&osc_ck);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88c5acb40fc..458f00cdcbe 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,6 +24,17 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
 static unsigned long omap2_table_mpu_recalc(struct clk *clk);
 static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ba05aa42bd8..9e43fe5209d 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
 	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
 	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
 	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
@@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = {
 
 #define MAX_DPLL_WAIT_TRIES		1000000
 
+#define MIN_SDRC_DLL_LOCK_FREQ		83000000
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 new_div = 0;
+	u32 unlock_dll = 0;
 	unsigned long validrate, sdrcrate;
 	struct omap_sdrc_params *sp;
 
@@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (!sp)
 		return -EINVAL;
 
-	pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		validrate);
-	pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
-		sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+		pr_debug("clock: will unlock SDRC DLL\n");
+		unlock_dll = 1;
+	}
+
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		 validrate);
+	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
 
 	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
 	WARN_ON(new_div != 1 && new_div != 2);
 
 	/* REVISIT: Add SDRC_MR changing to this code also */
 	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div);
+				  sp->actim_ctrlb, new_div, unlock_dll);
 
 	return 0;
 }
@@ -956,7 +967,7 @@ int __init omap2_clk_init(void)
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
 		if (c->cpu & cpu_clkflg) {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 017a30e9aa1..e433aec4efd 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,6 +27,8 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
+#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
+
 static unsigned long omap3_dpll_recalc(struct clk *clk);
 static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
@@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk modem_fck = {
+	.name		= "modem_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+	.name		= "sad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+	.name		= "mad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static const struct clksel omap343x_gpt_clksel[] = {
 	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
 	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
@@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
 /* SECURITY_L4_ICK2 based clocks */
 
 static struct clk security_l4_ick2 = {
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 281d5da1918..fe319ae4ca0 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = {
 static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6f3f5a36aae..6923deb98a2 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -145,6 +145,8 @@
 #define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM				(1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT				31
 
 /* CM_ICLKEN1_CORE specific bits */
 #define OMAP3430_EN_ICR					(1 << 29)
@@ -161,6 +163,8 @@
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
 #define OMAP3430_EN_OMAPCTRL				(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
+#define OMAP3430_EN_SAD2D				(1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT				3
 #define OMAP3430_EN_SDRC				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
 
@@ -176,6 +180,10 @@
 #define OMAP3430_EN_DES1				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
 
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT				3
+#define OMAP3430_EN_MAD2D				(1 << 3)
+
 /* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
 #define OMAP3430ES2_EN_TS_MASK				(1 << 1)
@@ -231,6 +239,8 @@
 #define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM				(1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT			31
 #define OMAP3430ES2_AUTO_MMC3				(1 << 30)
 #define OMAP3430ES2_AUTO_MMC3_SHIFT			30
 #define OMAP3430ES2_AUTO_ICR				(1 << 29)
@@ -287,6 +297,8 @@
 #define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
 #define OMAP3430ES1_AUTO_D2D				(1 << 3)
 #define OMAP3430ES1_AUTO_D2D_SHIFT			3
+#define OMAP3430_AUTO_SAD2D				(1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT			3
 #define OMAP3430_AUTO_SSI				(1 << 0)
 #define OMAP3430_AUTO_SSI_SHIFT				0
 
@@ -308,6 +320,8 @@
 #define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT			3
+#define OMAP3430_AUTO_MAD2D				(1 << 3)
 
 /* CM_CLKSEL_CORE */
 #define OMAP3430_CLKSEL_SSI_SHIFT			8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 65fdf78c91e..1d3c93bf86d 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
 #define OMAP2420_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global CM registers
@@ -38,6 +33,7 @@
 #define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
 #define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
 
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 00000000000..2fd22f9c5f0
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts:	Juha Yrjola
+ *		Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+	struct gpmc_timings t;
+
+	const int t_cer = 15;
+	const int t_avdp = 12;
+	const int t_aavdh = 7;
+	const int t_ce = 76;
+	const int t_aa = 76;
+	const int t_oe = 20;
+	const int t_cez = 20; /* max of t_cez, t_oez */
+	const int t_ds = 30;
+	const int t_wpl = 40;
+	const int t_wph = 30;
+
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = 0;
+	t.cs_on = 0;
+	t.adv_on = 0;
+
+	/* Read */
+	t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+	t.oe_on  = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+	t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+	t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+	t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle  = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Write */
+	t.adv_wr_off = t.adv_rd_off;
+	t.we_on  = t.oe_on;
+	if (cpu_is_omap34xx()) {
+		t.wr_data_mux_bus = t.we_on;
+		t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+	}
+	t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+	t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+	t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Configure GPMC for asynchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+				int sync_read, int sync_write, int hf)
+{
+	u32 reg;
+
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+		ONENAND_SYS_CFG1_BL_16;
+	if (sync_read)
+		reg |= ONENAND_SYS_CFG1_SYNC_READ;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+	if (sync_write)
+		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	if (hf)
+		reg |= ONENAND_SYS_CFG1_HF;
+	else
+		reg &= ~ONENAND_SYS_CFG1_HF;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+					void __iomem *onenand_base,
+					int freq)
+{
+	struct gpmc_timings t;
+	const int t_cer  = 15;
+	const int t_avdp = 12;
+	const int t_cez  = 20; /* max of t_cez, t_oez */
+	const int t_ds   = 30;
+	const int t_wpl  = 40;
+	const int t_wph  = 30;
+	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+	int err, ticks_cez;
+	int cs = cfg->cs;
+	u32 reg;
+
+	if (cfg->flags & ONENAND_SYNC_READ) {
+		sync_read = 1;
+	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+		sync_read = 1;
+		sync_write = 1;
+	}
+
+	if (!freq) {
+		/* Very first call freq is not known */
+		err = omap2_onenand_set_async_mode(cs, onenand_base);
+		if (err)
+			return err;
+		reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+		switch ((reg >> 4) & 0xf) {
+		case 0:
+			freq = 40;
+			break;
+		case 1:
+			freq = 54;
+			break;
+		case 2:
+			freq = 66;
+			break;
+		case 3:
+			freq = 83;
+			break;
+		case 4:
+			freq = 104;
+			break;
+		default:
+			freq = 54;
+			break;
+		}
+		first_time = 1;
+	}
+
+	switch (freq) {
+	case 83:
+		min_gpmc_clk_period = 12; /* 83 MHz */
+		t_ces   = 5;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 9;
+		break;
+	case 66:
+		min_gpmc_clk_period = 15; /* 66 MHz */
+		t_ces   = 6;
+		t_avds  = 5;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 11;
+		break;
+	default:
+		min_gpmc_clk_period = 18; /* 54 MHz */
+		t_ces   = 7;
+		t_avds  = 7;
+		t_avdh  = 7;
+		t_ach   = 9;
+		t_aavdh = 7;
+		t_rdyo  = 15;
+		sync_write = 0;
+		break;
+	}
+
+	tick_ns = gpmc_ticks_to_ns(1);
+	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+	gpmc_clk_ns = gpmc_ticks_to_ns(div);
+	if (gpmc_clk_ns < 15) /* >66Mhz */
+		hf = 1;
+	if (hf)
+		latency = 6;
+	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+		latency = 3;
+	else
+		latency = 4;
+
+	if (first_time)
+		set_onenand_cfg(onenand_base, latency,
+					sync_read, sync_write, hf);
+
+	if (div == 1) {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg |= (1 << 7);
+		reg |= (1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	} else {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg &= ~(1 << 7);
+		reg &= ~(1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	}
+
+	/* Set synchronous read timings */
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = min_gpmc_clk_period;
+	t.cs_on = 0;
+	t.adv_on = 0;
+	fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+	fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+	t.page_burst_access = gpmc_clk_ns;
+
+	/* Read */
+	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+	t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+		     ticks_cez);
+
+	/* Write */
+	if (sync_write) {
+		t.adv_wr_off = t.adv_rd_off;
+		t.we_on  = 0;
+		t.we_off = t.cs_rd_off;
+		t.cs_wr_off = t.cs_rd_off;
+		t.wr_cycle  = t.rd_cycle;
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+					gpmc_ns_to_ticks(min_gpmc_clk_period +
+					t_rdyo));
+			t.wr_access = t.access;
+		}
+	} else {
+		t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+							t_avdp, t_cer));
+		t.we_on  = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+		t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+		t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+		t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = t.we_on;
+			t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+		}
+	}
+
+	/* Configure GPMC for synchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_WRAPBURST_SUPP |
+			  GPMC_CONFIG1_READMULTIPLE_SUPP |
+			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+			  GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+			  GPMC_CONFIG1_PAGE_LEN(2) |
+			  (cpu_is_omap34xx() ? 0 :
+				(GPMC_CONFIG1_WAIT_READ_MON |
+				 GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_DEVICETYPE_NOR |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+	return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+	struct device *dev = &gpmc_onenand_device.dev;
+
+	/* Set sync timings in GPMC */
+	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+			freq) < 0) {
+		dev_err(dev, "Unable to set synchronous mode\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+	gpmc_onenand_data = _onenand_data;
+	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+	if (cpu_is_omap24xx() &&
+			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+	}
+
+	if (platform_device_register(&gpmc_onenand_device) < 0) {
+		printk(KERN_ERR "Unable to register OneNAND device\n");
+		return;
+	}
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 00000000000..df99d31d8b6
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact:	Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
+	.resource	= gpmc_smc91x_resources,
+	.dev		= {
+		.platform_data = &gpmc_smc91x_info,
+	},
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+	struct gpmc_timings t;
+	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
+	const int t4_r = 20;	/* Figure 12.2 read */
+	const int t4_w = 5;	/* Figure 12.4 write */
+	const int t5 = 25;	/* Figure 12.2 read */
+	const int t6 = 15;	/* Figure 12.2 read */
+	const int t7 = 5;	/* Figure 12.4 write */
+	const int t8 = 5;	/* Figure 12.4 write */
+	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
+	u32 l;
+
+	memset(&t, 0, sizeof(t));
+
+	/* Read timings */
+	t.cs_on = 0;
+	t.adv_on = t.cs_on;
+	t.oe_on = t.adv_on + t3;
+	t.access = t.oe_on + t5;
+	t.oe_off = t.access;
+	t.adv_rd_off = t.oe_off + max(t4_r, t6);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle = t20 - t.oe_on;
+
+	/* Write timings */
+	t.we_on = t.adv_on + t3;
+
+	if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+		t.wr_data_mux_bus = t.we_on;
+		t.we_off = t.wr_data_mux_bus + t7;
+	} else
+		t.we_off = t.we_on + t7;
+	if (cpu_is_omap34xx())
+		t.wr_access = t.we_off;
+	t.adv_wr_off = t.we_off + max(t4_w, t8);
+	t.cs_wr_off = t.we_off + t4_w;
+	t.wr_cycle = t20 - t.we_on;
+
+	l = GPMC_CONFIG1_DEVICESIZE_16;
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		l |= GPMC_CONFIG1_MUXADDDATA;
+	if (gpmc_cfg->flags & GPMC_READ_MON)
+		l |= GPMC_CONFIG1_WAIT_READ_MON;
+	if (gpmc_cfg->flags & GPMC_WRITE_MON)
+		l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+	if (gpmc_cfg->wait_pin)
+		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+	/*
+	 * FIXME: Calculate the address and data bus muxed timings.
+	 * Note that at least adv_rd_off needs to be changed according
+	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+	 * FPGA in between smc91x and omap as the timings are different
+	 * from above?
+	 */
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		return 0;
+
+	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	gpmc_cfg = board_data;
+
+	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+		gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+	if (gpmc_cfg->retime) {
+		ret = gpmc_cfg->retime();
+		if (ret != 0)
+			goto free1;
+	}
+
+	if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+		goto free1;
+
+	gpio_direction_input(gpmc_cfg->gpio_irq);
+	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+	if (gpmc_cfg->gpio_pwrdwn) {
+		ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+		if (ret)
+			goto free2;
+		gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+	}
+
+	if (gpmc_cfg->gpio_reset) {
+		ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+		if (ret)
+			goto free3;
+
+		gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+		gpio_set_value(gpmc_cfg->gpio_reset, 1);
+		msleep(100);
+		gpio_set_value(gpmc_cfg->gpio_reset, 0);
+	}
+
+	if (platform_device_register(&gpmc_smc91x_device) < 0) {
+		printk(KERN_ERR "Unable to register smc91x device\n");
+		gpio_free(gpmc_cfg->gpio_reset);
+		goto free3;
+	}
+
+	return;
+
+free3:
+	if (gpmc_cfg->gpio_pwrdwn)
+		gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+	gpio_free(gpmc_cfg->gpio_irq);
+free1:
+	gpmc_cs_free(gpmc_cfg->cs);
+
+	printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049c1d5..f91934b2b09 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
  *
  * Author: Juha Yrjola
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -424,6 +427,9 @@ void __init gpmc_init(void)
 	} else if (cpu_is_omap34xx()) {
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
+	} else if (cpu_is_omap44xx()) {
+		ck = "gpmc_fck";
+		l = OMAP44XX_GPMC_BASE;
 	}
 
 	gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914e0f8..458990e20c6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -200,7 +203,10 @@ void __init omap2_check_revision(void)
 		omap24xx_check_revision();
 	else if (cpu_is_omap34xx())
 		omap34xx_check_revision();
-	else
+	else if (cpu_is_omap44xx()) {
+		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+		return;
+	} else
 		pr_err("OMAP revision unknown, please fix!\n");
 
 	/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3a232..32afd944821 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
  * OMAP2 I/O mapping code
  *
  * Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
  *
  * Author:
  *	Juha Yrjola <juha.yrjola@nokia.com>
  *	Syed Khasim <x0khasim@ti.com>
  *
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -30,6 +32,7 @@
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
 
+#ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
 #include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
-
+#endif
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 	},
 };
 #endif
+#ifdef	CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_44XX_PHYS),
+		.length		= L3_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_44XX_PHYS),
+		.length		= L4_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WK_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_44XX_PHYS),
+		.length		= L4_WK_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+		.length		= OMAP44XX_GPMC_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
+		.length		= L4_PER_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_EMU_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_44XX_PHYS),
+		.length		= L4_EMU_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
 
 void __init omap2_map_common_io(void)
 {
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
 	 * revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap2_sdrc_init(sp);
+#endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 998c5c45587..b82863887f1 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -28,7 +28,6 @@
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
 #define INTC_PENDING_IRQ0	0x0098
-
 /* Number of IRQ state bits in each MIR register */
 #define IRQ_BITS_PER_REG	32
 
@@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = {
 	.ack	= omap_mask_ack_irq,
 	.mask	= omap_mask_irq,
 	.unmask	= omap_unmask_irq,
-	.disable = omap_mask_irq,
 };
 
 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
@@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
 }
 
+int omap_irq_pending(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		struct omap_irq_bank *bank = irq_banks + i;
+		int irq;
+
+		for (irq = 0; irq < bank->nr_irqs; irq += 32)
+			if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+					       ((irq >> 5) << 5)))
+				return 1;
+	}
+	return 0;
+}
+
 void __init omap_init_irq(void)
 {
 	unsigned long nr_of_irqs = 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e7220..9756a878fd9 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <mach/control.h>
@@ -26,31 +26,9 @@
 
 #include "mmc-twl4030.h"
 
-#if defined(CONFIG_TWL4030_CORE) && \
-	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
-#define LDO_CLR			0x00
-#define VSEL_S2_CLR		0x40
-
-#define VMMC1_DEV_GRP		0x27
-#define VMMC1_CLR		0x00
-#define VMMC1_315V		0x03
-#define VMMC1_300V		0x02
-#define VMMC1_285V		0x01
-#define VMMC1_185V		0x00
-#define VMMC1_DEDICATED		0x2A
-
-#define VMMC2_DEV_GRP		0x2B
-#define VMMC2_CLR		0x40
-#define VMMC2_315V		0x0c
-#define VMMC2_300V		0x0b
-#define VMMC2_285V		0x0a
-#define VMMC2_280V		0x09
-#define VMMC2_260V		0x08
-#define VMMC2_185V		0x06
-#define VMMC2_DEDICATED		0x2E
-
-#define VMMC_DEV_GRP_P1		0x20
+#if defined(CONFIG_REGULATOR) && \
+	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
 
 static struct twl_mmc_controller {
 	struct omap_mmc_platform_data	*mmc;
-	u8		twl_vmmc_dev_grp;
-	u8		twl_mmc_dedicated;
-	char		name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
-	{
-		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC1_DEDICATED,
-	},
-	{
-		.twl_vmmc_dev_grp		= VMMC2_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC2_DEDICATED,
-	},
-};
+	/* Vcc == configured supply
+	 * Vcc_alt == optional
+	 *   -	MMC1, supply for DAT4..DAT7
+	 *   -	MMC2/MMC2, external level shifter voltage supply, for
+	 *	chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+	 */
+	struct regulator		*vcc;
+	struct regulator		*vcc_aux;
+	char				name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
 
 static int twl_mmc_card_detect(int irq)
 {
@@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
 	int ret = 0;
 	int i;
 
-	ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
-	if (ret)
-		goto done;
-	ret = gpio_direction_input(mmc->slots[0].switch_pin);
-	if (ret)
-		goto err;
+	/* MMC/SD/SDIO doesn't require a card detect switch */
+	if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+		ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+		if (ret)
+			goto done;
+		ret = gpio_direction_input(mmc->slots[0].switch_pin);
+		if (ret)
+			goto err;
+	}
 
+	/* require at least main regulator */
 	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
 		if (hsmmc[i].name == mmc->slots[0].name) {
+			struct regulator *reg;
+
 			hsmmc[i].mmc = mmc;
+
+			reg = regulator_get(dev, "vmmc");
+			if (IS_ERR(reg)) {
+				dev_dbg(dev, "vmmc regulator missing\n");
+				/* HACK: until fixed.c regulator is usable,
+				 * we don't require a main regulator
+				 * for MMC2 or MMC3
+				 */
+				if (i != 0)
+					break;
+				ret = PTR_ERR(reg);
+				goto err;
+			}
+			hsmmc[i].vcc = reg;
+			mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+			/* allow an aux regulator */
+			reg = regulator_get(dev, "vmmc_aux");
+			hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+			/* UGLY HACK:  workaround regulator framework bugs.
+			 * When the bootloader leaves a supply active, it's
+			 * initialized with zero usecount ... and we can't
+			 * disable it without first enabling it.  Until the
+			 * framework is fixed, we need a workaround like this
+			 * (which is safe for MMC, but not in general).
+			 */
+			if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+				regulator_enable(hsmmc[i].vcc);
+				regulator_disable(hsmmc[i].vcc);
+			}
+			if (hsmmc[i].vcc_aux) {
+				if (regulator_is_enabled(reg) > 0) {
+					regulator_enable(reg);
+					regulator_disable(reg);
+				}
+			}
+
 			break;
 		}
 	}
@@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
 #define twl_mmc_resume	NULL
 #endif
 
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
-	int ret;
-	u8 vmmc = 0, dev_grp_val;
-
-	if (!vdd)
-		goto doit;
-
-	if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
-		/* VMMC1:  max 220 mA.  And for 8-bit mode,
-		 * VSIM:  max 50 mA
-		 */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC1_185V;
-			/* and VSIM_180V */
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC1_285V;
-			/* and VSIM_280V */
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC1_300V;
-			/* and VSIM_300V */
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC1_315V;
-			/* error if VSIM needed */
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
-		/* VMMC2:  max 100 mA */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC2_185V;
-			break;
-		case MMC_VDD_25_26:
-		case MMC_VDD_26_27:
-			vmmc = VMMC2_260V;
-			break;
-		case MMC_VDD_27_28:
-			vmmc = VMMC2_280V;
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC2_285V;
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC2_300V;
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC2_315V;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		return -EINVAL;
-	}
-
-doit:
-	if (vdd)
-		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
-	else
-		dev_grp_val = LDO_CLR;		/* Power down */
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					dev_grp_val, c->twl_vmmc_dev_grp);
-	if (ret || !vdd)
-		return ret;
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					vmmc, c->twl_mmc_dedicated);
-
-	return ret;
-}
-
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
@@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 
 	/*
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
 	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
 	 *
 	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
 	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
 	 */
 	if (power_on) {
 		if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, 0);
+		ret = mmc_regulator_set_ocr(c->vcc, 0);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
-	int ret;
+	int ret = 0;
 	struct twl_mmc_controller *c = &hsmmc[1];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/* If we don't see a Vcc regulator, assume it's a fixed
+	 * voltage always-on regulator.
+	 */
+	if (!c->vcc)
+		return 0;
+
 	/*
-	 * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+	 * Assume Vcc regulator is used only to power the card ... OMAP
 	 * VDDS is used to power the pins, optionally with a transceiver to
 	 * support cards using voltages other than VDDS (1.8V nominal).  When a
 	 * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+	 *
+	 * In some cases this regulator won't support enable/disable;
+	 * e.g. it's a fixed rail for a WLAN chip.
+	 *
+	 * In other cases vcc_aux switches interface power.  Example, for
+	 * eMMC cards it represents VccQ.  Sometimes transceivers or SDIO
+	 * chips/cards need an interface voltage rail too.
 	 */
 	if (power_on) {
+		/* only MMC2 supports a CLKIN */
 		if (mmc->slots[0].internal_clock) {
 			u32 reg;
 
@@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
 			omap_ctrl_writel(reg, control_devconf1_offset);
 		}
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
+		/* enable interface voltage rail, if needed */
+		if (ret == 0 && c->vcc_aux) {
+			ret = regulator_enable(c->vcc_aux);
+			if (ret < 0)
+				ret = mmc_regulator_set_ocr(c->vcc, 0);
+		}
 	} else {
-		ret = twl_mmc_set_voltage(c, 0);
+		if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+			ret = regulator_disable(c->vcc_aux);
+		if (ret == 0)
+			ret = mmc_regulator_set_ocr(c->vcc, 0);
 	}
 
 	return ret;
 }
 
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
-		int vdd)
-{
-	/*
-	 * Assume MMC3 has self-powered device connected, for example on-board
-	 * chip with external power source.
-	 */
-	return 0;
-}
-
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		mmc->slots[0].wires = c->wires;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
+		mmc->init = twl_mmc_late_init;
 
-		/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+		/* note: twl4030 card detect GPIOs can disable VMMCx ... */
 		if (gpio_is_valid(c->gpio_cd)) {
-			mmc->init = twl_mmc_late_init;
 			mmc->cleanup = twl_mmc_cleanup;
 			mmc->suspend = twl_mmc_suspend;
 			mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].gpio_wp = -EINVAL;
 
-		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
-		 * the TWL4030's VMMC1 and VMMC2, respectively;
-		 * and that MMC3 device has it's own power source.
+		/* NOTE:  MMC slots should have a Vcc regulator set up.
+		 * This may be from a TWL4030-family chip, another
+		 * controllable regulator, or a fixed supply.
+		 *
+		 * temporary HACK: ocr_mask instead of fixed supply
 		 */
+		mmc->slots[0].ocr_mask = c->ocr_mask;
 
 		switch (c->mmc) {
 		case 1:
+			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
-			mmc->slots[0].ocr_mask = MMC1_OCR;
 			break;
 		case 2:
-			mmc->slots[0].set_power = twl_mmc2_set_power;
-			if (c->transceiver)
-				mmc->slots[0].ocr_mask = MMC2_OCR;
-			else
-				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
-			break;
+			if (c->ext_clock)
+				c->transceiver = 1;
+			if (c->transceiver && c->wires > 4)
+				c->wires = 4;
+			/* FALLTHROUGH */
 		case 3:
-			mmc->slots[0].set_power = twl_mmc3_set_power;
-			mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+			/* off-chip level shifting, or none */
+			mmc->slots[0].set_power = twl_mmc23_set_power;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e862429..3807c45c9a6 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
 	struct device *dev;	/* returned: pointer to mmc adapter */
+	int	ocr_mask;	/* temporary HACK */
 };
 
-#if	defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
new file mode 100644
index 00000000000..6cc375a275b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -0,0 +1,152 @@
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg)    \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg)     \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+	struct reg {
+		const char *name;
+		u32 val;
+	} regs[32];
+	int reg_count = 0, i;
+	const char *s1 = NULL, *s2 = NULL;
+
+	if (!resume) {
+#if 0
+		/* MPU */
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+		DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+		/* INTC */
+		DUMP_INTC_REG(INTC_MIR0, 0x0084);
+		DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+		DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+		DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+		}
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+		/* DSP */
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+		}
+#endif
+	} else {
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+		if (cpu_is_omap24xx())
+			DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+		DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+		DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+		DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+		DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+	}
+
+	switch (mode) {
+	case 0:
+		s1 = "full";
+		s2 = "retention";
+		break;
+	case 1:
+		s1 = "MPU";
+		s2 = "retention";
+		break;
+	case 2:
+		s1 = "MPU";
+		s2 = "idle";
+		break;
+	}
+
+	if (!resume)
+#ifdef CONFIG_NO_HZ
+		printk(KERN_INFO
+		       "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+		       jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+					jiffies));
+#else
+		printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+	else
+		printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+			us / 1000, us % 1000);
+
+	for (i = 0; i < reg_count; i++)
+		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index ea8ceaed09c..00000000000
--- a/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
-	local_irq_disable();
-	local_fiq_disable();
-	if (need_resched()) {
-		local_fiq_enable();
-		local_irq_enable();
-		return;
-	}
-
-	omap2_sram_idle();
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
-	/* We cannot sleep in idle until we have resumed */
-	saved_idle = pm_idle;
-	pm_idle = NULL;
-	return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
-	return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
-	int ret = 0;
-
-	switch (state)
-	{
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap2_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static void omap2_pm_finish(void)
-{
-	pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
-	.prepare	= omap2_pm_prepare,
-	.enter		= omap2_pm_enter,
-	.finish		= omap2_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
-	return 0;
-}
-
-__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
new file mode 100644
index 00000000000..f7b3baf7667
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_debug				0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+					void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
new file mode 100644
index 00000000000..db1025562fb
--- /dev/null
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -0,0 +1,549 @@
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+				  void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+	f2 &= ~OMAP24XX_EN_UART3;
+
+	if (f1 | f2)
+		return 1;
+	return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+	u32 l;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* There is 1 reference hold for all children of the oscillator
+	 * clock, the following will remove it. If no one else uses the
+	 * oscillator itself it will be disabled if/when we enter retention
+	 * mode.
+	 */
+	clk_disable(osc_ck);
+
+	/* Clear old wake-up events */
+	/* REVISIT: These write to reserved bits? */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Workaround to kill USB */
+	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+	omap2_gpio_prepare_for_retention();
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(0, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	/* One last check for pending IRQs to avoid extra latency due
+	 * to sleeping unnecessarily. */
+	if (omap_irq_pending())
+		goto no_sleep;
+
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	/* Jump to SRAM suspend code */
+	omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_POWER));
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+
+no_sleep:
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(0, 1, tmp);
+	}
+	omap2_gpio_resume_after_retention();
+
+	clk_enable(osc_ck);
+
+	/* clear CORE wake-up events */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+	prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+	/* MPU domain wake events */
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x01)
+		prm_write_mod_reg(0x01, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x20)
+		prm_write_mod_reg(0x20, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+	/* Mask future PRCM-to-MPU interrupts */
+	prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+	u32 l;
+
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+		 OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+		 OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+		return 0;
+	/* Check for UART3. */
+	l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3)
+		return 0;
+	if (sti_console_enabled)
+		return 0;
+
+	return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+	int only_idle = 0;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* Putting MPU into the WFI state while a transfer is active
+	 * seems to cause the I2C block to timeout. Why? Good question. */
+	if (omap2_i2c_active())
+		return;
+
+	/* The peripherals seem not to be able to wake up the MPU when
+	 * it is in retention mode. */
+	if (omap2_allow_mpu_retention()) {
+		/* REVISIT: These write to reserved bits? */
+		prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+		prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+		prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+		/* Try to enter MPU retention */
+		prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+				  OMAP_LOGICRETSTATE,
+				  MPU_MOD, PM_PWSTCTRL);
+	} else {
+		/* Block MPU retention */
+
+		prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+		only_idle = 1;
+	}
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	omap2_sram_idle();
+
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+	}
+}
+
+static int omap2_can_sleep(void)
+{
+	if (omap2_fclks_active())
+		return 0;
+	if (osc_ck->usecount > 1)
+		return 0;
+	if (omap_dma_running())
+		return 0;
+
+	return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap2_can_sleep()) {
+		if (omap_irq_pending())
+			goto out;
+		omap2_enter_mpu_retention();
+		goto out;
+	}
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap2_enter_full_retention();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+	/* We cannot sleep in idle until we have resumed */
+	disable_hlt();
+	return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+	u32 wken_wkup, mir1;
+
+	wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+	/* Mask GPT1 */
+	mir1 = omap_readl(0x480fe0a4);
+	omap_writel(1 << 5, 0x480fe0ac);
+
+	omap_uart_prepare_suspend();
+	omap2_enter_full_retention();
+
+	omap_writel(mir1, 0x480fe0a4);
+	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+	return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap2_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap2_pm_prepare,
+	.enter		= omap2_pm_enter,
+	.finish		= omap2_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+	return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+	int i, num_mem_banks;
+	struct powerdomain *pwrdm;
+
+	/* Enable autoidle */
+	prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+			  OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+	/* Set all domain wakeup dependencies */
+	prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+	if (cpu_is_omap2430())
+		prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+	/*
+	 * Set CORE powerdomain memory banks to retain their contents
+	 * during RETENTION
+	 */
+	num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+	for (i = 0; i < num_mem_banks; i++)
+		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+	/* Set CORE powerdomain's next power state to RETENTION */
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Force-power down DSP, GFX powerdomains */
+
+	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(dsp_clkdm);
+
+	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(gfx_clkdm);
+
+	/* Enable clockdomain hardware-supervised control for all clkdms */
+	clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+	/* Enable clock autoidle for all domains */
+	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+			 OMAP24XX_AUTO_MAILBOXES |
+			 OMAP24XX_AUTO_WDT4 |
+			 OMAP2420_AUTO_WDT3 |
+			 OMAP24XX_AUTO_MSPRO |
+			 OMAP2420_AUTO_MMC |
+			 OMAP24XX_AUTO_FAC |
+			 OMAP2420_AUTO_EAC |
+			 OMAP24XX_AUTO_HDQ |
+			 OMAP24XX_AUTO_UART2 |
+			 OMAP24XX_AUTO_UART1 |
+			 OMAP24XX_AUTO_I2C2 |
+			 OMAP24XX_AUTO_I2C1 |
+			 OMAP24XX_AUTO_MCSPI2 |
+			 OMAP24XX_AUTO_MCSPI1 |
+			 OMAP24XX_AUTO_MCBSP2 |
+			 OMAP24XX_AUTO_MCBSP1 |
+			 OMAP24XX_AUTO_GPT12 |
+			 OMAP24XX_AUTO_GPT11 |
+			 OMAP24XX_AUTO_GPT10 |
+			 OMAP24XX_AUTO_GPT9 |
+			 OMAP24XX_AUTO_GPT8 |
+			 OMAP24XX_AUTO_GPT7 |
+			 OMAP24XX_AUTO_GPT6 |
+			 OMAP24XX_AUTO_GPT5 |
+			 OMAP24XX_AUTO_GPT4 |
+			 OMAP24XX_AUTO_GPT3 |
+			 OMAP24XX_AUTO_GPT2 |
+			 OMAP2420_AUTO_VLYNQ |
+			 OMAP24XX_AUTO_DSS,
+			 CORE_MOD, CM_AUTOIDLE1);
+	cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+			 OMAP24XX_AUTO_SSI |
+			 OMAP24XX_AUTO_USB,
+			 CORE_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+			 OMAP24XX_AUTO_GPMC |
+			 OMAP24XX_AUTO_SDMA,
+			 CORE_MOD, CM_AUTOIDLE3);
+	cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+			 OMAP24XX_AUTO_AES |
+			 OMAP24XX_AUTO_RNG |
+			 OMAP24XX_AUTO_SHA |
+			 OMAP24XX_AUTO_DES,
+			 CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+	/* Put DPLL and both APLLs into autoidle mode */
+	cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+			 PLL_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+			 OMAP24XX_AUTO_WDT1 |
+			 OMAP24XX_AUTO_MPU_WDT |
+			 OMAP24XX_AUTO_GPIOS |
+			 OMAP24XX_AUTO_32KSYNC |
+			 OMAP24XX_AUTO_GPT1,
+			 WKUP_MOD, CM_AUTOIDLE);
+
+	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+	 * stabilisation */
+	prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+	/* Configure automatic voltage transition */
+	prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_VOLTSETUP_OFFSET);
+	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+			  (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+			  OMAP24XX_MEMRETCTRL |
+			  (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+			  (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+			  OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+	/* Enable wake-up events */
+	prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+			  WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+	u32 l;
+
+	if (!cpu_is_omap24xx())
+		return -ENODEV;
+
+	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+	/* Look up important powerdomains, clockdomains */
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (!mpu_pwrdm)
+		pr_err("PM: mpu_pwrdm not found\n");
+
+	core_pwrdm = pwrdm_lookup("core_pwrdm");
+	if (!core_pwrdm)
+		pr_err("PM: core_pwrdm not found\n");
+
+	dsp_clkdm = clkdm_lookup("dsp_clkdm");
+	if (!dsp_clkdm)
+		pr_err("PM: mpu_clkdm not found\n");
+
+	gfx_clkdm = clkdm_lookup("gfx_clkdm");
+	if (!gfx_clkdm)
+		pr_err("PM: gfx_clkdm not found\n");
+
+
+	osc_ck = clk_get(NULL, "osc_ck");
+	if (IS_ERR(osc_ck)) {
+		printk(KERN_ERR "could not get osc_ck\n");
+		return -ENODEV;
+	}
+
+	if (cpu_is_omap242x()) {
+		emul_ck = clk_get(NULL, "emul_ck");
+		if (IS_ERR(emul_ck)) {
+			printk(KERN_ERR "could not get emul_ck\n");
+			clk_put(osc_ck);
+			return -ENODEV;
+		}
+	}
+
+	prcm_setup_regs();
+
+	/* Hack to prevent MPU retention when STI console is enabled. */
+	{
+		const struct omap_sti_console_config *sti;
+
+		sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+				      struct omap_sti_console_config);
+		if (sti != NULL && sti->enable)
+			sti_console_enabled = 1;
+	}
+
+	/*
+	 * We copy the assembler sleep/wakeup routines to SRAM.
+	 * These routines need to be in SRAM as that's the only
+	 * memory the MPU can see when it wakes up.
+	 */
+	if (cpu_is_omap24xx()) {
+		omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+						 omap24xx_idle_loop_suspend_sz);
+
+		omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+						    omap24xx_cpu_suspend_sz);
+	}
+
+	suspend_set_ops(&omap_pm_ops);
+	pm_idle = omap2_pm_idle;
+
+	return 0;
+}
+
+late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
new file mode 100644
index 00000000000..841d4c5ed8b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -0,0 +1,710 @@
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+	struct powerdomain *pwrdm;
+	u32 next_state;
+	u32 saved_state;
+	struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+	u32 wkst, irqstatus_mpu;
+	u32 fclk, iclk;
+
+	/* WKUP */
+	wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+		while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+	}
+
+	/* CORE */
+	wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+		fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+		prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+		while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+		cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+	}
+	wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+		fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+		while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+		cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	}
+
+	/* PER */
+	wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+		while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+	}
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		/* USBHOST */
+		wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+		if (wkst) {
+			iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_ICLKEN);
+			fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_FCLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_ICLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_FCLKEN);
+			prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+					  PM_WKST);
+			while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+						PM_WKST))
+				cpu_relax();
+			cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_ICLKEN);
+			cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_FCLKEN);
+		}
+	}
+
+	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+			  OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+		cpu_relax();
+
+	return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+	/* Variable to tell what needs to be saved and restored
+	 * in omap_sram_idle*/
+	/* save_state = 0 => Nothing to save and restored */
+	/* save_state = 1 => Only L1 and logic lost */
+	/* save_state = 2 => Only L2 lost */
+	/* save_state = 3 => L1, L2 and logic lost */
+	int save_state = 0, mpu_next_state;
+
+	if (!_omap_sram_idle)
+		return;
+
+	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+	switch (mpu_next_state) {
+	case PWRDM_POWER_RET:
+		/* No need to save context */
+		save_state = 0;
+		break;
+	default:
+		/* Invalid state */
+		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+		return;
+	}
+	omap2_gpio_prepare_for_retention();
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	_omap_sram_idle(NULL, save_state);
+	cpu_init();
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+	omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+	u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+		fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+	fck_core1 = cm_read_mod_reg(CORE_MOD,
+				    CM_FCLKEN1);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		fck_core3 = cm_read_mod_reg(CORE_MOD,
+					    OMAP3430ES2_CM_FCLKEN3);
+		fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+					  CM_FCLKEN);
+		fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					      CM_FCLKEN);
+	} else
+		fck_sgx = cm_read_mod_reg(GFX_MOD,
+					  OMAP3430ES2_CM_FCLKEN3);
+	fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+				  CM_FCLKEN);
+	fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+				  CM_FCLKEN);
+	fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+				  CM_FCLKEN);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+	fck_per &= ~OMAP3430_EN_UART3;
+
+	if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+	    fck_cam | fck_per | fck_usbhost)
+		return 1;
+	return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+	if (!omap_uart_can_sleep())
+		return 0;
+	if (omap3_fclks_active())
+		return 0;
+	return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+	u32 cur_state;
+	int sleep_switch = 0;
+	int ret = 0;
+
+	if (pwrdm == NULL || IS_ERR(pwrdm))
+		return -EINVAL;
+
+	while (!(pwrdm->pwrsts & (1 << state))) {
+		if (state == PWRDM_POWER_OFF)
+			return ret;
+		state--;
+	}
+
+	cur_state = pwrdm_read_next_pwrst(pwrdm);
+	if (cur_state == state)
+		return ret;
+
+	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+		sleep_switch = 1;
+		pwrdm_wait_transition(pwrdm);
+	}
+
+	ret = pwrdm_set_next_pwrst(pwrdm, state);
+	if (ret) {
+		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+		       pwrdm->name);
+		goto err;
+	}
+
+	if (sleep_switch) {
+		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		pwrdm_wait_transition(pwrdm);
+	}
+
+err:
+	return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap3_can_sleep())
+		goto out;
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap_sram_idle();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+	disable_hlt();
+	return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+	struct power_state *pwrst;
+	int state, ret = 0;
+
+	/* Read current next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node)
+		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+	/* Set ones wanted by suspend */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+			goto restore;
+		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+			goto restore;
+	}
+
+	omap_uart_prepare_suspend();
+	omap_sram_idle();
+
+restore:
+	/* Restore next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+		if (state > pwrst->next_state) {
+			printk(KERN_INFO "Powerdomain (%s) didn't enter "
+			       "target state %d\n",
+			       pwrst->pwrdm->name, pwrst->next_state);
+			ret = -1;
+		}
+	}
+	if (ret)
+		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+	else
+		printk(KERN_INFO "Successfully put all powerdomains "
+		       "to target state\n");
+
+	return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap3_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap3_pm_prepare,
+	.enter		= omap3_pm_enter,
+	.finish		= omap3_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ *                   retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle.  This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+	/* ensure IVA2 clock is disabled */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* if no clock activity, nothing else to do */
+	if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+	      OMAP3430_CLKACTIVITY_IVA2_MASK))
+		return;
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Enable IVA2 clock */
+	cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+			 OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Set IVA2 boot mode to 'idle' */
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+	/* Un-reset IVA2 */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Disable IVA2 clock */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+	u16 mask, padconf;
+
+	/* In a stand alone OMAP3430 where there is not a stacked
+	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
+	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+	/* reset modem */
+	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+			  CORE_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+	/* XXX Reset all wkdeps. This should be done when initializing
+	 * powerdomains */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+		prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	} else
+		prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+	/*
+	 * Enable interface clock autoidle for all modules.
+	 * Note that in the long run this should be done by clockfw
+	 */
+	cm_write_mod_reg(
+		OMAP3430_AUTO_MODEM |
+		OMAP3430ES2_AUTO_MMC3 |
+		OMAP3430ES2_AUTO_ICR |
+		OMAP3430_AUTO_AES2 |
+		OMAP3430_AUTO_SHA12 |
+		OMAP3430_AUTO_DES2 |
+		OMAP3430_AUTO_MMC2 |
+		OMAP3430_AUTO_MMC1 |
+		OMAP3430_AUTO_MSPRO |
+		OMAP3430_AUTO_HDQ |
+		OMAP3430_AUTO_MCSPI4 |
+		OMAP3430_AUTO_MCSPI3 |
+		OMAP3430_AUTO_MCSPI2 |
+		OMAP3430_AUTO_MCSPI1 |
+		OMAP3430_AUTO_I2C3 |
+		OMAP3430_AUTO_I2C2 |
+		OMAP3430_AUTO_I2C1 |
+		OMAP3430_AUTO_UART2 |
+		OMAP3430_AUTO_UART1 |
+		OMAP3430_AUTO_GPT11 |
+		OMAP3430_AUTO_GPT10 |
+		OMAP3430_AUTO_MCBSP5 |
+		OMAP3430_AUTO_MCBSP1 |
+		OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+		OMAP3430_AUTO_MAILBOXES |
+		OMAP3430_AUTO_OMAPCTRL |
+		OMAP3430ES1_AUTO_FSHOSTUSB |
+		OMAP3430_AUTO_HSOTGUSB |
+		OMAP3430_AUTO_SAD2D |
+		OMAP3430_AUTO_SSI,
+		CORE_MOD, CM_AUTOIDLE1);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_PKA |
+		OMAP3430_AUTO_AES1 |
+		OMAP3430_AUTO_RNG |
+		OMAP3430_AUTO_SHA11 |
+		OMAP3430_AUTO_DES1,
+		CORE_MOD, CM_AUTOIDLE2);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430_AUTO_MAD2D |
+			OMAP3430ES2_AUTO_USBTLL,
+			CORE_MOD, CM_AUTOIDLE3);
+	}
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_WDT2 |
+		OMAP3430_AUTO_WDT1 |
+		OMAP3430_AUTO_GPIO1 |
+		OMAP3430_AUTO_32KSYNC |
+		OMAP3430_AUTO_GPT12 |
+		OMAP3430_AUTO_GPT1 ,
+		WKUP_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_DSS,
+		OMAP3430_DSS_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_CAM,
+		OMAP3430_CAM_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_GPIO6 |
+		OMAP3430_AUTO_GPIO5 |
+		OMAP3430_AUTO_GPIO4 |
+		OMAP3430_AUTO_GPIO3 |
+		OMAP3430_AUTO_GPIO2 |
+		OMAP3430_AUTO_WDT3 |
+		OMAP3430_AUTO_UART3 |
+		OMAP3430_AUTO_GPT9 |
+		OMAP3430_AUTO_GPT8 |
+		OMAP3430_AUTO_GPT7 |
+		OMAP3430_AUTO_GPT6 |
+		OMAP3430_AUTO_GPT5 |
+		OMAP3430_AUTO_GPT4 |
+		OMAP3430_AUTO_GPT3 |
+		OMAP3430_AUTO_GPT2 |
+		OMAP3430_AUTO_MCBSP4 |
+		OMAP3430_AUTO_MCBSP3 |
+		OMAP3430_AUTO_MCBSP2,
+		OMAP3430_PER_MOD,
+		CM_AUTOIDLE);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430ES2_AUTO_USBHOST,
+			OMAP3430ES2_USBHOST_MOD,
+			CM_AUTOIDLE);
+	}
+
+	/*
+	 * Set all plls to autoidle. This is needed until autoidle is
+	 * enabled by clockfw
+	 */
+	cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+			 OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+			 MPU_MOD,
+			 CM_AUTOIDLE2);
+	cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+			 (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+			 PLL_MOD,
+			 CM_AUTOIDLE);
+	cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+			 PLL_MOD,
+			 CM_AUTOIDLE2);
+
+	/*
+	 * Enable control of expternal oscillator through
+	 * sys_clkreq. In the long run clock framework should
+	 * take care of this.
+	 */
+	prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+			     OMAP3430_GR_MOD,
+			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+	/* setup wakup source */
+	prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+			  OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+			  WKUP_MOD, PM_WKEN);
+	/* No need to write EN_IO, that is always enabled */
+	prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+			  OMAP3430_EN_GPT12,
+			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+	/* For some reason IO doesn't generate wakeup event even if
+	 * it is selected to mpu wakeup goup */
+	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	omap3_iva_idle();
+	omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+	struct power_state *pwrst;
+
+	if (!pwrdm->pwrsts)
+		return 0;
+
+	pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+	if (!pwrst)
+		return -ENOMEM;
+	pwrst->pwrdm = pwrdm;
+	pwrst->next_state = PWRDM_POWER_RET;
+	list_add(&pwrst->node, &pwrst_list);
+
+	if (pwrdm_has_hdwr_sar(pwrdm))
+		pwrdm_enable_hdwr_sar(pwrdm);
+
+	return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+		omap2_clkdm_allow_idle(clkdm);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+		 atomic_read(&clkdm->usecount) == 0)
+		omap2_clkdm_sleep(clkdm);
+	return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+	struct power_state *pwrst, *tmp;
+	int ret;
+
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
+	printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+	/* XXX prcm_setup_regs needs to be before enabling hw
+	 * supervised mode for powerdomains */
+	prcm_setup_regs();
+
+	ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+			  (irq_handler_t)prcm_interrupt_handler,
+			  IRQF_DISABLED, "prcm", NULL);
+	if (ret) {
+		printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+		       INT_34XX_PRCM_MPU_IRQ);
+		goto err1;
+	}
+
+	ret = pwrdm_for_each(pwrdms_setup);
+	if (ret) {
+		printk(KERN_ERR "Failed to setup powerdomains\n");
+		goto err2;
+	}
+
+	(void) clkdm_for_each(clkdms_setup);
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (mpu_pwrdm == NULL) {
+		printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+		goto err2;
+	}
+
+	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+					 omap34xx_cpu_suspend_sz);
+
+	suspend_set_ops(&omap_pm_ops);
+
+	pm_idle = omap3_pm_idle;
+
+err1:
+	return ret;
+err2:
+	free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+		list_del(&pwrst->node);
+		kfree(pwrst);
+	}
+	return ret;
+}
+
+late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 812d50ee495..cb1ae84e092 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -276,6 +276,8 @@
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP3430_EN_GPIO1				(1 << 3)
 #define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
 #define OMAP3430_EN_GPT1				(1 << 0)
 #define OMAP3430_EN_GPT1_SHIFT				0
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 826d326b806..9937e281469 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
 #define OMAP2420_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global PRM registers
@@ -38,80 +33,132 @@
  *
  */
 
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET		0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET	0x0080
-
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS	OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3430_PRM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3430_PRM_VC_SMPS_SA		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3430_PRM_CLKSEL		OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP2_PRCM_REVISION_OFFSET	0x0000
+#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
+#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
+#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
+#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
+#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
+#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
+#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3_PRM_REVISION_OFFSET	0x0004
+#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
+#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
+#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
+#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
+#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET	0x0058
+#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
+#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
+#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
+#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
+#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
+#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
+#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
+#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
+#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
+#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
+#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
+#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
  * Module specific PRM registers from PRM_BASE + domain offset
@@ -156,9 +203,11 @@
 
 #define OMAP3430_PM_MPUGRPSEL				0x00a4
 #define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
 
 #define OMAP3430_PM_IVAGRPSEL				0x00a8
 #define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
 
 #define OMAP3430_PM_PREPWSTST				0x00e8
 
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 00000000000..02e1c2d4705
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 00000000000..3751d293cb1
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2a30060cb4b..2045441e838 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params;
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT		3
+#define SDRC_POWER_PWDENA_SHIFT			2
+#define SDRC_POWER_PAGEPOLICY_SHIFT		0
 
 /**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
@@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
 {
 	struct omap_sdrc_params *sp;
 
+	if (!sdrc_init_params)
+		return NULL;
+
 	sp = sdrc_init_params;
 
-	while (sp->rate != r)
+	while (sp->rate && sp->rate != r)
 		sp++;
 
 	if (!sp->rate)
@@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 	omap2_sms_base = omap2_globals->sms;
 }
 
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
 void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 {
 	u32 l;
@@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
 
 	sdrc_init_params = sp;
+
+	/* XXX Enable SRFRONIDLEREQ here also? */
+	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+		(1 << SDRC_POWER_PWDENA_SHIFT) |
+		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+	sdrc_write_reg(l, SDRC_POWER);
 }
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0afdad5ae9f..feaec7eaf6b 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 	m_type = omap2xxx_sdrc_get_type();
 
 	local_irq_save(flags);
-	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	if (cpu_is_omap2420())
+		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+	else
+		__raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
 	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
 	curr_perf_level = level;
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c285b..b094c15bfe4 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -6,8 +6,13 @@
  * Copyright (C) 2005-2008 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
+ * Major rework for PM support by Kevin Hilman
+ *
  * Based off of arch/arm/mach-omap/omap1/serial.c
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -21,9 +26,50 @@
 
 #include <mach/common.h>
 #include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER		0x17	/* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
 
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+struct omap_uart_state {
+	int num;
+	int can_sleep;
+	struct timer_list timer;
+	u32 timeout;
+
+	void __iomem *wk_st;
+	void __iomem *wk_en;
+	u32 wk_mask;
+	u32 padconf;
+
+	struct clk *ick;
+	struct clk *fck;
+	int clocked;
+
+	struct plat_serial8250_port *p;
+	struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+	int context_valid;
+
+	/* Registers to be saved/restored for OFF-mode */
+	u16 dll;
+	u16 dlh;
+	u16 ier;
+	u16 sysc;
+	u16 scr;
+	u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
@@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
  * properly. Note that the TX watermark initialization may not be needed
  * once the 8250.c watermark handling code is merged.
  */
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
+	struct plat_serial8250_port *p = uart->p;
+
 	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
 	serial_write_reg(p, UART_OMAP_SCR, 0x08);
 	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
 	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
 }
 
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
 {
-	int i;
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		if (uart_ick[i] && uart_fck[i]) {
-			if (enable) {
-				clk_enable(uart_ick[i]);
-				clk_enable(uart_fck[i]);
-			} else {
-				clk_disable(uart_ick[i]);
-				clk_disable(uart_fck[i]);
+	u16 lcr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	lcr = serial_read_reg(p, UART_LCR);
+	serial_write_reg(p, UART_LCR, 0xBF);
+	uart->dll = serial_read_reg(p, UART_DLL);
+	uart->dlh = serial_read_reg(p, UART_DLM);
+	serial_write_reg(p, UART_LCR, lcr);
+	uart->ier = serial_read_reg(p, UART_IER);
+	uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+	uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+	uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+	uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+	u16 efr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	if (!uart->context_valid)
+		return;
+
+	uart->context_valid = 0;
+
+	serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	efr = serial_read_reg(p, UART_EFR);
+	serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, 0x0);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_DLL, uart->dll);
+	serial_write_reg(p, UART_DLM, uart->dlh);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, uart->ier);
+	serial_write_reg(p, UART_FCR, 0xA1);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_EFR, efr);
+	serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+	serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+	serial_write_reg(p, UART_OMAP_WER, uart->wer);
+	serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+	serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+	if (uart->clocked)
+		return;
+
+	clk_enable(uart->ick);
+	clk_enable(uart->fck);
+	uart->clocked = 1;
+	omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_save_context(uart);
+	uart->clocked = 0;
+	clk_disable(uart->ick);
+	clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+					  int enable)
+{
+	struct plat_serial8250_port *p = uart->p;
+	u16 sysc;
+
+	sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+	if (enable)
+		sysc |= 0x2 << 3;
+	else
+		sysc |= 0x1 << 3;
+
+	serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+	omap_uart_enable_clocks(uart);
+
+	omap_uart_smart_idle_enable(uart, 0);
+	uart->can_sleep = 0;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_smart_idle_enable(uart, 1);
+	uart->can_sleep = 1;
+	del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+	struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+	omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num && uart->can_sleep) {
+			omap_uart_disable_clocks(uart);
+			return;
+		}
+	}
+}
+
+void omap_uart_resume_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num) {
+			omap_uart_enable_clocks(uart);
+
+			/* Check for IO pad wakeup */
+			if (cpu_is_omap34xx() && uart->padconf) {
+				u16 p = omap_ctrl_readw(uart->padconf);
+
+				if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+					omap_uart_block_sleep(uart);
 			}
+
+			/* Check for normal UART wakeup */
+			if (__raw_readl(uart->wk_st) & uart->wk_mask)
+				omap_uart_block_sleep(uart);
+
+			return;
 		}
 	}
 }
 
+void omap_uart_prepare_suspend(void)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		omap_uart_allow_sleep(uart);
+	}
+}
+
+int omap_uart_can_sleep(void)
+{
+	struct omap_uart_state *uart;
+	int can_sleep = 1;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (!uart->clocked)
+			continue;
+
+		if (!uart->can_sleep) {
+			can_sleep = 0;
+			continue;
+		}
+
+		/* This UART can now safely sleep. */
+		omap_uart_allow_sleep(uart);
+	}
+
+	return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred.  It does _nothing_ to handle the interrupt.  Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+	struct omap_uart_state *uart = dev_id;
+
+	omap_uart_block_sleep(uart);
+
+	return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+	u32 v;
+	struct plat_serial8250_port *p = uart->p;
+	int ret;
+
+	uart->can_sleep = 0;
+	uart->timeout = sleep_timeout;
+	setup_timer(&uart->timer, omap_uart_idle_timer,
+		    (unsigned long) uart);
+	mod_timer(&uart->timer, jiffies + uart->timeout);
+	omap_uart_smart_idle_enable(uart, 0);
+
+	if (cpu_is_omap34xx()) {
+		u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+		u32 wk_mask = 0;
+		u32 padconf = 0;
+
+		uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+		uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP3430_ST_UART1_MASK;
+			padconf = 0x182;
+			break;
+		case 1:
+			wk_mask = OMAP3430_ST_UART2_MASK;
+			padconf = 0x17a;
+			break;
+		case 2:
+			wk_mask = OMAP3430_ST_UART3_MASK;
+			padconf = 0x19e;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+		uart->padconf = padconf;
+	} else if (cpu_is_omap24xx()) {
+		u32 wk_mask = 0;
+
+		if (cpu_is_omap2430()) {
+			uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		} else if (cpu_is_omap2420()) {
+			uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		}
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP24XX_ST_UART1_MASK;
+			break;
+		case 1:
+			wk_mask = OMAP24XX_ST_UART2_MASK;
+			break;
+		case 2:
+			wk_mask = OMAP24XX_ST_UART3_MASK;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+	} else {
+		uart->wk_en = 0;
+		uart->wk_st = 0;
+		uart->wk_mask = 0;
+		uart->padconf = 0;
+	}
+
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v;
+
+		v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+
+	p->flags |= UPF_SHARE_IRQ;
+	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+			  "serial idle", (void *)uart);
+	WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	struct omap_uart_state *uart;
+	unsigned int value;
+
+	if (sscanf(buf, "%u", &value) != 1) {
+		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+		return -EINVAL;
+	}
+	sleep_timeout = value * HZ;
+	list_for_each_entry(uart, &uart_list, node) {
+		uart->timeout = sleep_timeout;
+		if (uart->timeout)
+			mod_timer(&uart->timer, jiffies + uart->timeout);
+		else
+			/* A zero value means disable timeout feature */
+			omap_uart_block_sleep(uart);
+	}
+	return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
 void __init omap_serial_init(void)
 {
-	int i;
+	int i, err;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -114,9 +496,14 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
+	if (cpu_is_omap44xx()) {
+		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+			serial_platform_data[i].irq += 32;
+	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct plat_serial8250_port *p = serial_platform_data + i;
+		struct omap_uart_state *uart = &omap_uart[i];
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -125,35 +512,39 @@ void __init omap_serial_init(void)
 		}
 
 		sprintf(name, "uart%d_ick", i+1);
-		uart_ick[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_ick[i])) {
+		uart->ick = clk_get(NULL, name);
+		if (IS_ERR(uart->ick)) {
 			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
-			uart_ick[i] = NULL;
-		} else
-			clk_enable(uart_ick[i]);
+			uart->ick = NULL;
+		}
 
 		sprintf(name, "uart%d_fck", i+1);
-		uart_fck[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_fck[i])) {
+		uart->fck = clk_get(NULL, name);
+		if (IS_ERR(uart->fck)) {
 			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
-			uart_fck[i] = NULL;
-		} else
-			clk_enable(uart_fck[i]);
+			uart->fck = NULL;
+		}
 
-		omap_serial_reset(p);
+		if (!uart->ick || !uart->fck)
+			continue;
+
+		uart->num = i;
+		p->private_data = uart;
+		uart->p = p;
+		list_add(&uart->node, &uart_list);
+
+		omap_uart_enable_clocks(uart);
+		omap_uart_reset(uart);
+		omap_uart_idle_init(uart);
 	}
-}
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
+	err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+	if (!err)
+		err = sysfs_create_file(&serial_device.dev.kobj,
+					&sleep_timeout_attr.attr);
+#endif
 
-static int __init omap_init(void)
-{
-	return platform_device_register(&serial_device);
 }
-arch_initcall(omap_init);
+
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index bf9e96105e1..130aadbfa08 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,7 +28,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
 
 #include <mach/omap24xx.h>
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
new file mode 100644
index 00000000000..e5e2553e79a
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P	OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
+				       * available */
+#define SCRATCHPAD_BASE_P	OMAP343X_CTRL_REGADDR(\
+				OMAP343X_CONTROL_MEM_WKUP +\
+				SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+	.text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+        stmfd   sp!, {lr}     @ save registers on stack
+	adr	r0, restore
+        ldmfd   sp!, {pc}     @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+        .word   . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ *	 wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
+loop:
+	/*b	loop*/	@Enable to debug by stepping through code
+	/* r0 contains restore pointer in sdram */
+	/* r1 contains information about saving context */
+	ldr     r4, sdrc_power          @ read the SDRC_POWER register
+	ldr     r5, [r4]                @ read the contents of SDRC_POWER
+	orr     r5, r5, #0x40           @ enable self refresh on idle req
+	str     r5, [r4]                @ write back to SDRC_POWER register
+
+	cmp	r1, #0x0
+	/* If context save is required, do that and execute wfi */
+	bne	save_context_wfi
+	/* Data memory barrier and Data sync barrier */
+	mov	r1, #0
+	mcr	p15, 0, r1, c7, c10, 4
+	mcr	p15, 0, r1, c7, c10, 5
+
+	wfi				@ wait for interrupt
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+restore:
+	/* b restore*/ 	@ Enable to debug restore code
+        /* Check what was the reason for mpu reset and store the reason in r9*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost - In this case, we wont be here */
+        /* 3 - Both L1 and L2 lost */
+	ldr     r1, pm_pwstctrl_mpu
+	ldr	r2, [r1]
+	and     r2, r2, #0x3
+	cmp     r2, #0x0	@ Check if target power state was OFF or RET
+        moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
+	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
+	bne	logic_l1_restore
+	/* Execute smi to invalidate L2 cache */
+	mov r12, #0x1                         @ set up to invalide L2
+smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
+logic_l1_restore:
+	mov	r1, #0
+	/* Invalidate all instruction caches to PoU
+	 * and flush branch target cache */
+	mcr	p15, 0, r1, c7, c5, 0
+
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldmia	r3!, {r4-r6}
+	mov	sp, r4
+	msr	spsr_cxsf, r5
+	mov	lr, r6
+
+	ldmia	r3!, {r4-r9}
+	/* Coprocessor access Control Register */
+	mcr p15, 0, r4, c1, c0, 2
+
+	/* TTBR0 */
+	MCR p15, 0, r5, c2, c0, 0
+	/* TTBR1 */
+	MCR p15, 0, r6, c2, c0, 1
+	/* Translation table base control register */
+	MCR p15, 0, r7, c2, c0, 2
+	/*domain access Control Register */
+	MCR p15, 0, r8, c3, c0, 0
+	/* data fault status Register */
+	MCR p15, 0, r9, c5, c0, 0
+
+	ldmia  r3!,{r4-r8}
+	/* instruction fault status Register */
+	MCR p15, 0, r4, c5, c0, 1
+	/*Data Auxiliary Fault Status Register */
+	MCR p15, 0, r5, c5, c1, 0
+	/*Instruction Auxiliary Fault Status Register*/
+	MCR p15, 0, r6, c5, c1, 1
+	/*Data Fault Address Register */
+	MCR p15, 0, r7, c6, c0, 0
+	/*Instruction Fault Address Register*/
+	MCR p15, 0, r8, c6, c0, 2
+	ldmia  r3!,{r4-r7}
+
+	/* user r/w thread and process ID */
+	MCR p15, 0, r4, c13, c0, 2
+	/* user ro thread and process ID */
+	MCR p15, 0, r5, c13, c0, 3
+	/*Privileged only thread and process ID */
+	MCR p15, 0, r6, c13, c0, 4
+	/* cache size selection */
+	MCR p15, 2, r7, c0, c0, 0
+	ldmia  r3!,{r4-r8}
+	/* Data TLB lockdown registers */
+	MCR p15, 0, r4, c10, c0, 0
+	/* Instruction TLB lockdown registers */
+	MCR p15, 0, r5, c10, c0, 1
+	/* Secure or Nonsecure Vector Base Address */
+	MCR p15, 0, r6, c12, c0, 0
+	/* FCSE PID */
+	MCR p15, 0, r7, c13, c0, 0
+	/* Context PID */
+	MCR p15, 0, r8, c13, c0, 1
+
+	ldmia  r3!,{r4-r5}
+	/* primary memory remap register */
+	MCR p15, 0, r4, c10, c2, 0
+	/*normal memory remap register */
+	MCR p15, 0, r5, c10, c2, 1
+
+	/* Restore cpsr */
+	ldmia	r3!,{r4}	/*load CPSR from SDRAM*/
+	msr	cpsr, r4	/*store cpsr */
+
+	/* Enabling MMU here */
+	mrc	p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+	and	r7, #0x7
+	cmp	r7, #0x0
+	beq	usettbr0
+ttbr_error:
+	/* More work needs to be done to support N[0:2] value other than 0
+	* So looping here so that the error can be detected
+	*/
+	b	ttbr_error
+usettbr0:
+	mrc	p15, 0, r2, c2, c0, 0
+	ldr	r5, ttbrbit_mask
+	and	r2, r5
+	mov	r4, pc
+	ldr	r5, table_index_mask
+	and	r4, r5 /* r4 = 31 to 20 bits of pc */
+	/* Extract the value to be written to table entry */
+	ldr	r1, table_entry
+	add	r1, r1, r4 /* r1 has value to be written to table entry*/
+	/* Getting the address of table entry to modify */
+	lsr	r4, #18
+	add	r2, r4 /* r2 has the location which needs to be modified */
+	/* Storing previous entry of location being modified */
+	ldr	r5, scratchpad_base
+	ldr	r4, [r2]
+	str	r4, [r5, #0xC0]
+	/* Modify the table entry */
+	str	r1, [r2]
+	/* Storing address of entry being modified
+	 * - will be restored after enabling MMU */
+	ldr	r5, scratchpad_base
+	str	r2, [r5, #0xC4]
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 4	@ Flush prefetch buffer
+	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
+	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
+	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
+	/* Restore control register  but dont enable caches here*/
+	/* Caches will be enabled after restoring MMU table entry */
+	ldmia	r3!, {r4}
+	/* Store previous value of control register in scratchpad */
+	str	r4, [r5, #0xC8]
+	ldr	r2, cache_pred_disable_mask
+	and	r4, r2
+	mcr	p15, 0, r4, c1, c0, 0
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+save_context_wfi:
+	/*b	save_context_wfi*/	@ enable to debug save code
+	mov	r8, r0 /* Store SDRAM address in r8 */
+        /* Check what that target sleep state is:stored in r1*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost */
+        /* 3 - Both L1 and L2 lost */
+	cmp	r1, #0x2 /* Only L2 lost */
+	beq	clean_l2
+	cmp	r1, #0x1 /* L2 retained */
+	/* r9 stores whether to clean L2 or not*/
+	moveq	r9, #0x0 /* Dont Clean L2 */
+	movne	r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+	/* Store sp and spsr to SDRAM */
+	mov	r4, sp
+	mrs	r5, spsr
+	mov	r6, lr
+	stmia	r8!, {r4-r6}
+	/* Save all ARM registers */
+	/* Coprocessor access control register */
+	mrc	p15, 0, r6, c1, c0, 2
+	stmia	r8!, {r6}
+	/* TTBR0, TTBR1 and Translation table base control */
+	mrc	p15, 0, r4, c2, c0, 0
+	mrc	p15, 0, r5, c2, c0, 1
+	mrc	p15, 0, r6, c2, c0, 2
+	stmia	r8!, {r4-r6}
+	/* Domain access control register, data fault status register,
+	and instruction fault status register */
+	mrc	p15, 0, r4, c3, c0, 0
+	mrc	p15, 0, r5, c5, c0, 0
+	mrc	p15, 0, r6, c5, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Data aux fault status register, instruction aux fault status,
+	datat fault address register and instruction fault address register*/
+	mrc	p15, 0, r4, c5, c1, 0
+	mrc	p15, 0, r5, c5, c1, 1
+	mrc	p15, 0, r6, c6, c0, 0
+	mrc	p15, 0, r7, c6, c0, 2
+	stmia	r8!, {r4-r7}
+	/* user r/w thread and process ID, user r/o thread and process ID,
+	priv only thread and process ID, cache size selection */
+	mrc	p15, 0, r4, c13, c0, 2
+	mrc	p15, 0, r5, c13, c0, 3
+	mrc	p15, 0, r6, c13, c0, 4
+	mrc	p15, 2, r7, c0, c0, 0
+	stmia	r8!, {r4-r7}
+	/* Data TLB lockdown, instruction TLB lockdown registers */
+	mrc	p15, 0, r5, c10, c0, 0
+	mrc	p15, 0, r6, c10, c0, 1
+	stmia	r8!, {r5-r6}
+	/* Secure or non secure vector base address, FCSE PID, Context PID*/
+	mrc	p15, 0, r4, c12, c0, 0
+	mrc	p15, 0, r5, c13, c0, 0
+	mrc	p15, 0, r6, c13, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Primary remap, normal remap registers */
+	mrc	p15, 0, r4, c10, c2, 0
+	mrc	p15, 0, r5, c10, c2, 1
+	stmia	r8!,{r4-r5}
+
+	/* Store current cpsr*/
+	mrs	r2, cpsr
+	stmia	r8!, {r2}
+
+	mrc	p15, 0, r4, c1, c0, 0
+	/* save control register */
+	stmia	r8!, {r4}
+clean_caches:
+	/* Clean Data or unified cache to POU*/
+	/* How to invalidate only L1 cache???? - #FIX_ME# */
+	/* mcr	p15, 0, r11, c7, c11, 1 */
+	cmp	r9, #1 /* Check whether L2 inval is required or not*/
+	bne	skip_l2_inval
+clean_l2:
+	/* read clidr */
+	mrc     p15, 1, r0, c0, c0, 1
+	/* extract loc from clidr */
+	ands    r3, r0, #0x7000000
+	/* left align loc bit field */
+	mov     r3, r3, lsr #23
+	/* if loc is 0, then no need to clean */
+	beq     finished
+	/* start clean at cache level 0 */
+	mov     r10, #0
+loop1:
+	/* work out 3x current cache level */
+	add     r2, r10, r10, lsr #1
+	/* extract cache type bits from clidr*/
+	mov     r1, r0, lsr r2
+	/* mask of the bits for current cache only */
+	and     r1, r1, #7
+	/* see what cache we have at this level */
+	cmp     r1, #2
+	/* skip if no cache, or just i-cache */
+	blt     skip
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	/* isb to sych the new cssr&csidr */
+	isb
+	/* read the new csidr */
+	mrc     p15, 1, r1, c0, c0, 0
+	/* extract the length of the cache lines */
+	and     r2, r1, #7
+	/* add 4 (line length offset) */
+	add     r2, r2, #4
+	ldr     r4, assoc_mask
+	/* find maximum number on the way size */
+	ands    r4, r4, r1, lsr #3
+	/* find bit position of way size increment */
+	clz     r5, r4
+	ldr     r7, numset_mask
+	/* extract max number of the index size*/
+	ands    r7, r7, r1, lsr #13
+loop2:
+	mov     r9, r4
+	/* create working copy of max way size*/
+loop3:
+	/* factor way and cache number into r11 */
+	orr     r11, r10, r9, lsl r5
+	/* factor index number into r11 */
+	orr     r11, r11, r7, lsl r2
+	/*clean & invalidate by set/way */
+	mcr     p15, 0, r11, c7, c10, 2
+	/* decrement the way*/
+	subs    r9, r9, #1
+	bge     loop3
+	/*decrement the index */
+	subs    r7, r7, #1
+	bge     loop2
+skip:
+	add     r10, r10, #2
+	/* increment cache number */
+	cmp     r3, r10
+	bgt     loop1
+finished:
+	/*swith back to cache level 0 */
+	mov     r10, #0
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	isb
+skip_l2_inval:
+	/* Data memory barrier and Data sync barrier */
+	mov     r1, #0
+	mcr     p15, 0, r1, c7, c10, 4
+	mcr     p15, 0, r1, c7, c10, 5
+
+	wfi                             @ wait for interrupt
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+	/* restore regs and return */
+	ldmfd   sp!, {r0-r12, pc}
+
+i_dll_wait:
+	ldr     r4, clk_stabilize_delay
+
+i_dll_delay:
+	subs    r4, r4, #0x1
+	bne     i_dll_delay
+	ldr     r4, sdrc_power
+	ldr     r5, [r4]
+	bic     r5, r5, #0x40
+	str     r5, [r4]
+	bx	lr
+pm_prepwstst_core:
+	.word	PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+	.word	PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+	.word	PM_PWSTCTRL_MPU_P
+scratchpad_base:
+	.word	SCRATCHPAD_BASE_P
+sdrc_power:
+	.word SDRC_POWER_V
+context_mem:
+	.word	0x803E3E14
+clk_stabilize_delay:
+	.word 0x000001FF
+assoc_mask:
+	.word	0x3ff
+numset_mask:
+	.word	0x7fff
+ttbrbit_mask:
+	.word	0xFFFFC000
+table_index_mask:
+	.word	0xFFF00000
+table_entry:
+	.word	0x00000C02
+cache_pred_disable_mask:
+	.word	0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index af4bd349022..bb299851116 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll:
 omap242x_sdi_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap242x_sdi_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl:
 omap242x_srs_sdrc_rfr_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap242x_srs_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap242x_ssp_set_config:
-	.word OMAP242X_PRCM_CLKCFG_CTRL
+	.word OMAP2420_PRCM_CLKCFG_CTRL
 omap242x_ssp_pll_ctl:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap242x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 84363e269e8..9955abcaeb3 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll:
 omap243x_sdi_sdrc_dlla_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap243x_sdi_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl:
 omap243x_srs_sdrc_rfr_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap243x_srs_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap243x_ssp_set_config:
-	.word OMAP243X_PRCM_CLKCFG_CTRL
+	.word OMAP2430_PRCM_CLKCFG_CTRL
 omap243x_ssp_pll_ctl:
 	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap243x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2c714613634..c080c82521e 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -40,69 +40,74 @@
 /*
  * Change frequency of core dpll
  * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ *      SDRC rates < 83MHz
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
+	ldr	r4, [sp, #52]		@ pull extra args off the stack
+	dsb				@ flush buffered writes to interconnect
 	cmp	r3, #0x2
 	blne	configure_sdrc
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	unlock_dll
 	blne	lock_dll
-	cmp	r3, #0x1
-	blne	unlock_dll
 	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
 	bl 	configure_core_dpll
 	bl	enable_sdrc
-	cmp	r3, #0x1
-	blne	wait_dll_unlock
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	wait_dll_unlock
 	blne	wait_dll_lock
 	cmp	r3, #0x1
 	blne	configure_sdrc
+	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
 	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
 unlock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	orr	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	orr	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 lock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	bic	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	bic	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 sdram_in_selfrefresh:
-	mov	r5, #0x0		@ Move 0 to R5
-	mcr	p15, 0, r5, c7, c10, 5	@ memory barrier
-	ldr	r4, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r5, [r4]		@ read the contents of SDRC_POWER
-	orr 	r5, r5, #0x40		@ enable self refresh on idle req
-	str 	r5, [r4]		@ write back to SDRC_POWER register
-	ldr	r4, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r5, [r4]
-	bic	r5, r5, #0x2		@ disable iclk bit for SRDC
-	str 	r5, [r4]
+	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
+	ldr	r12, [r11]		@ read the contents of SDRC_POWER
+	mov	r9, r12			@ keep a copy of SDRC_POWER bits
+	orr 	r12, r12, #0x40		@ enable self refresh on idle req
+	bic 	r12, r12, #0x4		@ clear PWDENA
+	str 	r12, [r11]		@ write back to SDRC_POWER register
+	ldr	r12, [r11]		@ posted-write barrier for SDRC
+	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
+	ldr	r12, [r11]
+	bic	r12, r12, #0x2		@ disable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr 	r5, [r4]
-	and 	r5, r5, #0x2		@ check for SDRC idle
-	cmp 	r5, #2
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr 	r12, [r11]
+	and 	r12, r12, #0x2		@ check for SDRC idle
+	cmp 	r12, #2
 	bne 	wait_sdrc_idle
 	bx 	lr
 configure_core_dpll:
-	ldr 	r4, omap3_cm_clksel1_pll
-	ldr	r5, [r4]
-	ldr	r6, core_m2_mask_val	@ modify m2 for core dpll
-	and	r5, r5, r6
-	orr	r5, r5, r3, lsl #0x1B	@ r3 contains the M2 val
-	str	r5, [r4]
-	mov 	r5, #0x800		@ wait for the clock to stabilise
+	ldr 	r11, omap3_cm_clksel1_pll
+	ldr	r12, [r11]
+	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
+	and	r12, r12, r10
+	orr	r12, r12, r3, lsl #0x1B	@ r3 contains the M2 val
+	str	r12, [r11]
+	ldr	r12, [r11]		@ posted-write barrier for CM
+	mov 	r12, #0x800		@ wait for the clock to stabilise
 	cmp	r3, #2
 	bne	wait_clk_stable
 	bx	lr
 wait_clk_stable:
-	subs 	r5, r5, #1
+	subs 	r12, r12, #1
 	bne	wait_clk_stable
 	nop
 	nop
@@ -116,42 +121,42 @@ wait_clk_stable:
 	nop
 	bx	lr
 enable_sdrc:
-	ldr 	r4, omap3_cm_iclken1_core
-	ldr	r5, [r4]
-	orr 	r5, r5, #0x2		@ enable iclk bit for SDRC
-	str 	r5, [r4]
+	ldr 	r11, omap3_cm_iclken1_core
+	ldr	r12, [r11]
+	orr 	r12, r12, #0x2		@ enable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle1:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr	r5, [r4]
-	and 	r5, r5, #0x2
-	cmp	r5, #0
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr	r12, [r11]
+	and 	r12, r12, #0x2
+	cmp	r12, #0
 	bne	wait_sdrc_idle1
-	ldr	r4, omap3_sdrc_power
-	ldr	r5, [r4]
-	bic 	r5, r5, #0x40
-	str 	r5, [r4]
+restore_sdrc_power_val:
+	ldr	r11, omap3_sdrc_power
+	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
 	bx	lr
 wait_dll_lock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and 	r5, r5, #0x4
-	cmp	r5, #0x4
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and 	r12, r12, #0x4
+	cmp	r12, #0x4
 	bne	wait_dll_lock
 	bx	lr
 wait_dll_unlock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and	r5, r5, #0x4
-	cmp	r5, #0x0
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and	r12, r12, #0x4
+	cmp	r12, #0x0
 	bne	wait_dll_unlock
 	bx	lr
 configure_sdrc:
-	ldr	r4, omap3_sdrc_rfr_ctrl
-	str	r0, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrla
-	str	r1, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrlb
-	str	r2, [r4]
+	ldr	r11, omap3_sdrc_rfr_ctrl
+	str	r0, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrla
+	str	r1, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrlb
+	str	r2, [r11]
+	ldr	r2, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba12090..2ce474a9d2b 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
  *
  * Some parts based off of TI's 24xx code:
  *
- *   Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
  *
  * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
@@ -82,7 +83,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 		period -= 1;
-
+		if (cpu_is_omap44xx())
+			period = 0xff;	/* FIXME: */
 		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +147,9 @@ static void __init omap2_gp_clockevent_init(void)
 		     "timer-gp: omap_dm_timer_set_source() failed\n");
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+	if (cpu_is_omap44xx())
+		/* Assuming 32kHz clk is driving GPT1 */
+		tick_rate = 32768;	/* FIXME: */
 
 	pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
 		gptimer_id, tick_rate);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 34a56a136ef..d85296dc896 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,10 +28,20 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
 
+#define OTG_SYSCONFIG	(OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+	/* Ensure force-idle mode for OTG controller */
+	if (cpu_is_omap34xx())
+		omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
 static struct resource musb_resources[] = {
 	[0] = { /* start and end set dynamically */
 		.flags	= IORESOURCE_MEM,
@@ -184,4 +194,13 @@ void __init usb_musb_init(void)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
+
+	usb_musb_pm_init();
+}
+
+#else
+void __init usb_musb_init(void)
+{
+	usb_musb_pm_init();
 }
+#endif /* CONFIG_USB_MUSB_SOC */