Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] update mach-types
  [ARM] Add cmpxchg support for ARMv6+ systems (v5)
  [ARM] barriers: improve xchg, bitops and atomic SMP barriers
  Gemini: Fix SRAM/ROM location after memory swap
  MAINTAINER: Add F: entries for Gemini and FA526
  [ARM] disable NX support for OABI-supporting kernels
  [ARM] add coherent DMA mask for mv643xx_eth
  [ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP
  [ARM] pxa: add parameter to clksrc_read() for pxa168/910
  [ARM] pxa: fix the incorrectly defined drive strength macros for pxa{168,910}
  [ARM] Orion: Remove explicit name for platform device resources
  [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219.
  [ARM] pxa/ezx: fix pin configuration for low power mode
  [ARM] pxa/spitz: provide spitz_ohci_exit() that unregisters USB_HOST GPIO
  [ARM] pxa: enable GPIO receivers after configuring pins
  [ARM] pxa: allow gpio_reset drive high during normal work
  [ARM] pxa: save/restore PGSR on suspend/resume.

1 files changed, 18 insertions, 18 deletions

diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 92ba16e1b6f..7db966dc29c 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO,				/* pcap interrupt */
-	GPIO4_GPIO,				/* WDI_AP */
-	GPIO55_GPIO,				/* SYS_RESTART */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
+	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
+	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
 
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
 static unsigned long gen1_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO12_GPIO,
+	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO48_GPIO,				/* RESET */
 	GPIO28_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO57_GPIO,				/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI2 */
-	GPIO82_GPIO,				/* RESET */
-	GPIO99_GPIO,				/* TC_MM_EN */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
+	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
+	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
 
 	/* sound */
 	GPIO52_SSP3_SCLK,
@@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
 	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
 static unsigned long gen2_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO15_GPIO,
+	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* EOC */
-	GPIO10_GPIO,
+	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
 
 	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO37_GPIO,				/* RESET */
 	GPIO57_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO96_GPIO,				/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO116_GPIO,				/* RESET */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
+	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
 	GPIO41_GPIO,				/* BP_FLASH */
 
 	/* sound */