aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100
diff options
context:
space:
mode:
authorPavel Machek <pavel@ucw.cz>2006-07-11 22:56:13 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-07-11 22:56:13 +0100
commit3821589c3becb4620dd56bf7f85c14084be1cf22 (patch)
treecb392ebae0b62185209d7c4a46db0e3d8b04a63b /arch/arm/mach-sa1100
parentf7ede370a2aac96903d6e25f3b04345fa6d066f2 (diff)
[ARM] 3723/1: collie charging
Patch from Pavel Machek It seems that sharp had charger on by default... This at least turns it off. Also battery reading now works and is useful. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-sa1100')
-rw-r--r--arch/arm/mach-sa1100/collie_pm.c69
1 files changed, 45 insertions, 24 deletions
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index 45b1e71f111..1e25b1d19fc 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -9,6 +9,9 @@
* Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
* and sometimes charges them when it should not. If it makes angry lithium to come your way...
* ...well, you have been warned.
+ *
+ * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
+ * and my collie did not explode (yet).
*/
#include <linux/module.h>
@@ -40,9 +43,8 @@ static void collie_charger_init(void)
{
int err;
- if (sharpsl_param.adadj != -1) {
+ if (sharpsl_param.adadj != -1)
ad_revise = sharpsl_param.adadj;
- }
/* Register interrupt handler. */
if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
@@ -72,27 +74,17 @@ static void collie_measure_temp(int on)
static void collie_charge(int on)
{
- if (on) {
- printk("Should start charger\n");
- } else {
- printk("Should stop charger\n");
- }
-#ifdef I_AM_SURE
+ extern struct platform_device colliescoop_device;
- /* Zaurus seems to contain LTC1731 ; it should know when to
+ /* Zaurus seems to contain LTC1731; it should know when to
* stop charging itself, so setting charge on should be
* relatively harmless (as long as it is not done too often).
*/
-#define CF_BUF_CTRL_BASE 0xF0800000
-#define SCOOP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr)))
-#define SCOOP_REG_GPWR SCOOP_REG(SCOOP_GPWR)
-
if (on) {
set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
} else {
reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
}
-#endif
}
static void collie_discharge(int on)
@@ -127,7 +119,6 @@ int collie_read_backup_battery(void)
ucb1x00_adc_enable(ucb);
- /* Gives 75..130 */
ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
@@ -146,9 +137,8 @@ int collie_read_main_battery(void)
ucb1x00_adc_enable(ucb);
ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
- /* gives values 160..255 with battery removed... and
- 145..255 with battery inserted. (on AC), goes as low as
- 80 on DC. */
+
+ mdelay(1);
voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
@@ -192,7 +182,7 @@ static unsigned long read_devdata(int which)
case SHARPSL_BATT_TEMP:
return collie_read_temp();
case SHARPSL_ACIN_VOLT:
- return 0x1;
+ return 500;
case SHARPSL_STATUS_ACIN: {
int ret = GPLR & COLLIE_GPIO_AC_IN;
printk("AC status = %d\n", ret);
@@ -208,10 +198,33 @@ static unsigned long read_devdata(int which)
}
}
+struct battery_thresh collie_battery_levels_acin[] = {
+ { 420, 100},
+ { 417, 95},
+ { 415, 90},
+ { 413, 80},
+ { 411, 75},
+ { 408, 70},
+ { 406, 60},
+ { 403, 50},
+ { 398, 40},
+ { 391, 25},
+ { 10, 5},
+ { 0, 0},
+};
+
struct battery_thresh collie_battery_levels[] = {
- { 368, 100},
- { 358, 25},
- { 356, 5},
+ { 394, 100},
+ { 390, 95},
+ { 380, 90},
+ { 370, 80},
+ { 368, 75}, /* From sharp code: battery high with frontlight */
+ { 366, 70}, /* 60..90 -- fake values invented by me for testing */
+ { 364, 60},
+ { 362, 50},
+ { 360, 40},
+ { 358, 25}, /* From sharp code: battery low with frontlight */
+ { 356, 5}, /* From sharp code: battery verylow with frontlight */
{ 0, 0},
};
@@ -226,13 +239,21 @@ struct sharpsl_charger_machinfo collie_pm_machinfo = {
.postsuspend = collie_postsuspend,
.charger_wakeup = collie_charger_wakeup,
.should_wakeup = collie_should_wakeup,
- .bat_levels = 3,
+ .bat_levels = 12,
.bat_levels_noac = collie_battery_levels,
- .bat_levels_acin = collie_battery_levels,
+ .bat_levels_acin = collie_battery_levels_acin,
.status_high_acin = 368,
.status_low_acin = 358,
.status_high_noac = 368,
.status_low_noac = 358,
+ .charge_on_volt = 350, /* spitz uses 2.90V, but lets play it safe. */
+ .charge_on_temp = 550,
+ .charge_acin_high = 550, /* collie does not seem to have sensor for this, anyway */
+ .charge_acin_low = 450, /* ignored, too */
+ .fatal_acin_volt = 356,
+ .fatal_noacin_volt = 356,
+
+ .batfull_irq = 1, /* We do not want periodical charge restarts */
};
static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)