[OMAP850] Changes to base IO subsystem, v2

Changes to base IO subsystem.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

6 files changed, 212 insertions, 8 deletions

diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 4c3e582f3d3..3afe540149f 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -52,6 +52,22 @@ static struct map_desc omap730_io_desc[] __initdata = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct map_desc omap850_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP850_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP850_DSP_START),
+		.length		= OMAP850_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP850_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP850_DSPREG_START),
+		.length		= OMAP850_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
 	{
@@ -109,6 +125,13 @@ void __init omap1_map_common_io(void)
 		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
 	}
 #endif
+
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+	}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 062c905c2ba..721e0d9d8b1 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -58,6 +58,25 @@ MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
 #define OMAP730_PINS_SZ		0
 #endif	/* CONFIG_ARCH_OMAP730 */
 
+#ifdef CONFIG_ARCH_OMAP850
+struct pin_config __initdata_or_module omap850_pins[] = {
+MUX_CFG_850("E2_850_KBR0",        12,   21,    0,   20,   1, 0)
+MUX_CFG_850("J7_850_KBR1",        12,   25,    0,   24,   1, 0)
+MUX_CFG_850("E1_850_KBR2",        12,   29,    0,   28,   1, 0)
+MUX_CFG_850("F3_850_KBR3",        13,    1,    0,    0,   1, 0)
+MUX_CFG_850("D2_850_KBR4",        13,    5,    0,    4,   1, 0)
+MUX_CFG_850("C2_850_KBC0",        13,    9,    0,    8,   1, 0)
+MUX_CFG_850("D3_850_KBC1",        13,   13,    0,   12,   1, 0)
+MUX_CFG_850("E4_850_KBC2",        13,   17,    0,   16,   1, 0)
+MUX_CFG_850("F4_850_KBC3",        13,   21,    0,   20,   1, 0)
+MUX_CFG_850("E3_850_KBC4",        13,   25,    0,   24,   1, 0)
+
+MUX_CFG_850("AA17_850_USB_DM",     2,   21,    0,   20,   0, 0)
+MUX_CFG_850("W16_850_USB_PU_EN",   2,   25,    0,   24,   0, 0)
+MUX_CFG_850("W17_850_USB_VBUSI",   2,   29,    0,   28,   0, 0)
+};
+#endif
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config __initdata_or_module omap1xxx_pins[] = {
 /*
@@ -419,6 +438,11 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
 	}
+
+#ifdef CONFIG_ARCH_OMAP850
+	omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
+#endif
+
 #endif
 
 #ifdef CONFIG_OMAP_MUX_ERRORS
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0002084e065..842090b148f 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -121,6 +121,13 @@ void __init omap_serial_init(void)
 		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
 	}
 
+	if (cpu_is_omap850()) {
+		serial_platform_data[0].regshift = 0;
+		serial_platform_data[1].regshift = 0;
+		serial_platform_data[0].irq = INT_850_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+	}
+
 	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index f856a90b264..d3fa41e3d8c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -81,6 +81,22 @@
 #define OMAP730_GPIO_INT_STATUS		0x14
 
 /*
+ * OMAP850 specific GPIO registers
+ */
+#define OMAP850_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO_DATA_INPUT		0x00
+#define OMAP850_GPIO_DATA_OUTPUT	0x04
+#define OMAP850_GPIO_DIR_CONTROL	0x08
+#define OMAP850_GPIO_INT_CONTROL	0x0c
+#define OMAP850_GPIO_INT_MASK		0x10
+#define OMAP850_GPIO_INT_STATUS		0x14
+
+/*
  * omap24xx specific GPIO registers
  */
 #define OMAP242X_GPIO1_BASE		IO_ADDRESS(0x48018000)
@@ -159,7 +175,8 @@ struct gpio_bank {
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
 #define METHOD_GPIO_730		3
-#define METHOD_GPIO_24XX	4
+#define METHOD_GPIO_850		4
+#define METHOD_GPIO_24XX	5
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
@@ -190,6 +207,19 @@ static struct gpio_bank gpio_bank_730[7] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct gpio_bank gpio_bank_850[7] = {
+	{ OMAP_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO4_BASE,  INT_850_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO5_BASE,  INT_850_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_850 },
+	{ OMAP850_GPIO6_BASE,  INT_850_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+};
+#endif
+
+
 #ifdef CONFIG_ARCH_OMAP24XX
 
 static struct gpio_bank gpio_bank_242x[4] = {
@@ -236,7 +266,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 			return &gpio_bank[0];
 		return &gpio_bank[1 + (gpio >> 4)];
 	}
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		if (OMAP_GPIO_IS_MPUIO(gpio))
 			return &gpio_bank[0];
 		return &gpio_bank[1 + (gpio >> 5)];
@@ -251,7 +281,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 
 static inline int get_gpio_index(int gpio)
 {
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		return gpio & 0x1f;
 	if (cpu_is_omap24xx())
 		return gpio & 0x1f;
@@ -273,7 +303,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if ((cpu_is_omap16xx()) && gpio < 64)
 		return 0;
-	if (cpu_is_omap730() && gpio < 192)
+	if (cpu_is_omap7xx() && gpio < 192)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
@@ -318,6 +348,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP730_GPIO_DIR_CONTROL;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
@@ -380,6 +415,16 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_OUTPUT;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
@@ -426,6 +471,11 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP730_GPIO_DATA_INPUT;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_INPUT;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
@@ -598,6 +648,18 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_CONTROL;
+		l = __raw_readl(reg);
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
@@ -678,6 +740,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP730_GPIO_INT_STATUS;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_STATUS;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
@@ -736,6 +803,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_MASK;
+		mask = 0xffffffff;
+		inv = 1;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
@@ -799,6 +873,16 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_MASK;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
@@ -983,6 +1067,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_730)
 		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (bank->method == METHOD_GPIO_850)
+		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
@@ -1372,6 +1460,13 @@ static int __init _omap_gpio_init(void)
 		gpio_bank = gpio_bank_730;
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		printk(KERN_INFO "OMAP850 GPIO hardware\n");
+		gpio_bank_count = 7;
+		gpio_bank = gpio_bank_850;
+	}
+#endif
 
 #ifdef CONFIG_ARCH_OMAP24XX
 	if (cpu_is_omap242x()) {
@@ -1420,7 +1515,7 @@ static int __init _omap_gpio_init(void)
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
 			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
-		if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) {
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
 			__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
 			__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
 
@@ -1743,6 +1838,9 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_DIR_CONTROL;
 		break;
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -1762,7 +1860,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 		if (bank_is_mpuio(bank))
 			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap730())
+		else if (cpu_class_is_omap2() || cpu_is_omap730() ||
+				cpu_is_omap850())
 			bankwidth = 32;
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 8d9dfe31438..2b22a8799bc 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -31,7 +31,8 @@
 
 #define OMAP_MPUIO_BASE			0xfffb5000
 
-#ifdef CONFIG_ARCH_OMAP730
+#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
+
 #define OMAP_MPUIO_INPUT_LATCH		0x00
 #define OMAP_MPUIO_OUTPUT		0x02
 #define OMAP_MPUIO_IO_CNTL		0x04
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index f4362b8682c..6a02f8f4c8b 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -61,6 +61,16 @@
 					.pull_bit = bit, \
 					.pull_val = status,
 
+#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
+					.mux_reg = OMAP850_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_850(reg, bit, status)	.pull_name = "OMAP850_IO_CONF_"#reg, \
+					.pull_reg = OMAP850_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #else
 
 #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
@@ -83,6 +93,15 @@
 					.pull_bit = bit, \
 					.pull_val = status,
 
+#define MUX_REG_850(reg, mode_offset, mode) \
+					.mux_reg = OMAP850_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_850(reg, bit, status)	.pull_reg = OMAP850_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #endif /* CONFIG_OMAP_MUX_DEBUG */
 
 #define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
@@ -98,7 +117,7 @@
 
 
 /*
- * OMAP730 has a slightly different config for the pin mux.
+ * OMAP730/850 has a slightly different config for the pin mux.
  * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
  *   not the FUNC_MUX_CTRL_x regs from hardware.h
  * - for pull-up/down, only has one enable bit which is is in the same register
@@ -114,6 +133,17 @@
 	PU_PD_REG(NA, 0)		\
 },
 
+#define MUX_CFG_850(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_850(mux_reg, mode_offset, mode)		\
+	PULL_REG_850(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+
 #define MUX_CFG_24XX(desc, reg_offset, mode,			\
 				pull_en, pull_mode, dbg)	\
 {								\
@@ -221,6 +251,26 @@ enum omap730_index {
 	W17_730_USB_VBUSI,
 };
 
+enum omap850_index {
+	/* OMAP 850 keyboard */
+	E2_850_KBR0,
+	J7_850_KBR1,
+	E1_850_KBR2,
+	F3_850_KBR3,
+	D2_850_KBR4,
+	C2_850_KBC0,
+	D3_850_KBC1,
+	E4_850_KBC2,
+	F4_850_KBC3,
+	E3_850_KBC4,
+
+	/* USB */
+	AA17_850_USB_DM,
+	W16_850_USB_PU_EN,
+	W17_850_USB_VBUSI,
+};
+
+
 enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,